OutlookSoft Point of Contact at SAP?

I am looking for is a point of contact from SAP who is focused on OutlookSoft consulting. 
I know we were still wrapping up some consulting activities with our implementation. 
Unfortunately, I found out after the fact that the entire team that I had worked with during our OutlookSoft implementation had left SAP in mid May.
This puts us in an unfortunate situation due do knowledge loss.
I'd like to at least establish a SAP point of contact to which I can discuss the status of our implementation.
Is there anyone at SAP who is an OutlookSoft Lead? 
Or would it be best to go to the third party vendor which now employs the consultants and team that we have used in the past?
Thank you.
- Jason Schwartz

Hi Jason,
You would have better luck posting on the Business Process Expert -> Enterprise Performance Management Forum. 
James Sherrit and Scott Cairncross of the BPC (formerly OutlookSoft) RIG and Prakash Darji of BPC Product Management check in there from time to time.  There are others from SAP involved with CPM/FPM that keep an eye on that forum.
Business Planning
Hope this helps.
Mary
p.s. BTW, are you using version 5.0 or 5.1?

Similar Messages

  • SAP GRC AC: Functional Areas and Point of Contact

    Dear all.
    We are configuring the functional areas and i would like to know how to map a user (Point of Contact) for each functional area.
    Regards and thank you.

    Dear Sara,
    according to definition Point of Contact is an approver for a specific Functional Area. Functional Area is an attribute used to categorize users and roles.
    First of all you need to assign a user to role Point of contact in Access Control Owners application.
    Next you can use them in MSMP configuration as using following FM: GRAC_MSMP_POINT_CONTACT_AGENT.
    Let me know, if you require further assistance,
    Filip

  • Why can't we have a single point of contact who de...

    Three weeks ago our house was hit by lightning and our broadband connection went on the blitz (a Linnit technical term).
    The telephone stopped working. I did an on-line check and the connection registered a fault. The on-line system logged the fault with the teachnical team. So far so good...
    I received a call from the tech team advising an engineer was coming out to us, if the fault was with our equipment we would be charged. That's fair. Engineer called. My phones were fine, BUT the BT router was where the fault lay said the engineer. We would need to raise another fault report because he only dealt with telephone AND as he was a subcontractor he would bill for the work... He disconnected the router so the phone would work and left.
    I work virtually, which means that I can work from my home, so I need the internet even more than my family want the telephone. I plugged the internet back in so that I could continue to work and called BT again from my mobile. Speaking to a very polite guy in Delhi I was asked to describe my phone socket, unplug the router from the office, carry it downstairs to the kitchen where the main socket is, plug the router in there, reconnect, try again, all sorts of stuff before finally being advised that it was probably just the 'microfilter' and that as they were very inexpensive it might be faster for me to go out and buy one and plug it in myself rather than have another engineer come out to us.
    So I did just that. In fact, as the microfilters are less than a fiver, I got two... brought them home and plugged one in... didn't work.
    Called Delhi again. Spoke to someone else who was, again, very polite. They tried to get me to unplug and plug things in and out again, but I politely declined this time explaining that now the poor internet connection that we did have was running so slowly I am having to commute in to work over Christmas. He sympathised and told us that he would escalate the issue. That was before Christmas. Since then I received a text on my phone on Christmas Day telling me they couldn't reach me!!! 
    Today I called again to BEG someone to please come out and fix things for us. We aren't technical. We cannot act as pseudo engineers. We pay BT one bill each quarter for a service. Why on earth can't BT provide me with a single point of contact when I have an issue. And if that point of contact could understand me and explain things to me in words and phrases that I understand that would be perfect!
    Last year I cancelled three mobile contracts that we'd had since the early 90's with O2 because they were so unhelpful.
    BT aren't the cheapest broadband provider but we've stayed with them out of 20+ years loyalty and the understanding that we had a one-stop-shop. Now, it looks as though I'll be shopping around for another domestic broadband provider for 2012.

    Thank you for being so helpful and constructive.
    I tried to look at the ASDL settings, john46 but it's asking me for my HomeHub password... the only password I have is for our wireless network and that one doesn't work. 
    I can't test the phone line right now because I'll have to disconnect the internet and I'm currently working on another computer whilst chatting on this one with you. However I will do that later. I'll also look at the RogerB link you provided. 
    Truth is, we're pensioners who use the internet but we havent a grain of technical understanding between us. We're old fashioned enough to admit that we just want someone who knows what he's doing to come here and fix it for us. It's already cost us £130 for an engineer to come out from OpenReach to tell us the phone line is OK and it's the router causing the problem. Best case scenario is that another BT engineer who knows about broadband comes out and does it because the last BT person that I spoke to in Delhi did actually confirm that there is a fault on the BT side. I'm getting so frustrated right now I'll probably call out an independant I find in Yellow Pages and get charged an arm and a leg again and I'll then cancel with BT in a fit of pique.

  • My original Apple ID is associated with an email address that I no longer have access to. How do I reset the system to recognize my new email address as my primary point of contact and erase the other one?

    My original Apple ID is associated with an email address that I no longer have access to. How do I reset the system to recognize my new email address as my primary point of contact and erase the other one?

    If when you go to icloud.com and sign in with your current iCloud ID you see all your iCloud data there, you can safely sign out of the iCloud account on your Mac and choose Delete at all the prompts, then sign back in with the current ID.  This only deletes the data from your Mac, not from iCloud.  Your iCloud data will reappear on your Mac when you sign back in after a brief delay as it redownloads.  If you have automatically imported your photo stream photos to your iPhoto library you won't lose them either (if you haven't, save them to your library first).
    Again, only do this if when you go to icloud.com with your current ID you see your iCloud data there.

  • BW in-house training whom to contact at SAP?

    Whom should I contact at SAP to request an In-House training on BW Reports?  your responses are much appreciated thank you.

    Hi Krishna,
    Should be able to contact the SAP person who handles the account for your company...where are you based?

  • What are the quick contacts(First Point of contacts from Microsoft or other) for urgent Coded UI issue resolution??

    Hi,
    I want the contact of persons or group or forum where i can get immediate answer about my issue. Because when i post the question on msdn, its literally takes 1 days .
    How to contact Microsoft For Coded UI Issue?
    So could you please tell me--
    1. which steps should be followed so that i can get quick answer?
    2. Which communities should i join?
    3. What are the first point of contacts from microsoft for coded UI??
    Please suggests me in this ..........its very useful 
    Thanks in advance

    Hi Mon_bk,
    Thank you for posting in MSDN forum.
    >>I want the contact of persons or group or forum where i can get immediate answer about my issue.
    Since this forum is support the contact of forum, we could provide answer about the coded UI test issue. So if possible, I suggest you can tell us the detailed issue about your coded UI test, we will answer your issue as soon as possible.In
    addition, as you said that:
    >>Because when i post the question on msdn, its literally takes 1 days .
    Since it is the time difference problem so that it will literally takes 1 days. For this issue, we are very sorry.
    However, if you still want to a other way to support your coded UI test issue. I know that there have a phone support way, but it needs to paid.
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
    In my point, I suggest you could post the detailed coded UI test issue here, we will be happy to help you solve the coded UI test issue.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to Run Allocation in Outlooksoft Everest 4.2 or SAP BPC 5.1

    Hello,
    Currently we use OS Everest 4.2 and we are in the Process of installing SAP BPC 5.1. We haven't used OS or BPC for allocation. I am trying to find a document that helps us guide through the process of creating a Allocation rules / formulas.
    We found a Allocation Manual in Old Outlooksoft Support site and tried using it but it doesn't work or may be I am doing something wrong.
    This is a Sample Allocation formula that we were just trying to see if it works.
    *RUNALLOCATION
    *FACTOR=USING/100
    *DIM ACCOUNTS  WHAT=AMOUNT; WHERE=<<<; USING = COUNT
    *DIM ENTITY  WHAT=EAST; WHERE=EAST;USING<>EAST
    *ENDALLOCATION
    *COMMIT
    It gives us  an error shown below when validating the Logic: shown below
    Update Excel file to Server
    Getting formulas
    Creating LGF file
    Validating logic
    *ValidateFormula: Invalid instruction: RUNALLOCATION
    Error occured
    If you have any documents that will show the step by step instructions on how ALLOCATION works and how to implement, please send it. I didn't find any thing in the helpfile. Its very difficult to figure out without any documentation.
    I would appreciate any help.. Thanks a lot !!!

    First of all, I am feeling for you. It is very hard situation that thousand of users has own local "MyDocument" folder in local PC.
    Folder structure between 5.1 and 4.2 is almost identical. Only difference is name of folder in My Documents. It was "Everest" in 4.2 but "OutlookSoft" in 5.1.
    And there is couple more differences but it is going to recover automatically. Something like dimension cache, appinfo archive.
    So, I like to suggest rename current "Everest" to "OutlookSoft" in My Documents. And do some test. I think biggest issue of here is report functionality between two versions.
    At least, simple rename procedure is much easier than copy all reports to correct path.
    I'm praying for your luck.

  • Entry point error while installing SAP GUI 7.20 compilation 3

    Hi Experts,
    I couldn't install SAP GUI 7.20 compilation 3 in my PC, I used SAP GUI in my PC a year ago but later I formatted my disk. Now when I click on SAPGUISETP it is throwing the following error
    The Procedure entry point ?FeiDbgException@@YAXVCWin32Exception@@@Z could not be located in teh
    dynamic link library NwSapFeiLg.dll
    Can anyone please advise?
    NB P.s: Initially it mentioned the dll files NWSAPFEIUT.dll  & NwSapFeiLg.dll were missing just now I copied them to System & System32 folders. But even though it is showing this entry point error. Also i have done a clean boot and tried installing it but in vain.

    Hi
    Please can you check the version of nwsapfeilg.dll in C:\Program Files\SAP\SapSetup\setup
    The issue was caused by a version conflict. nwsapfeilg.dll.
    Complete Installation SAP GUI 720 + Frontend
    http://wiki.sdn.sap.com/wiki/x/CIENDw
    Please check if this solves the issue.
    Regards,
    Naveen.

  • MS Share Point Server Integrate with SAP Server

    Hi,
       We are having MS Share Point Server in one machine and SAP Server (ERP6.0 EHP4) on another machine.
       I want to integrate MS Share Point Server with SAP ERP6.0 EHP4 System (for example if i want attach any docs in sap it has to be store in MS Share Point Server).
    I stuided the some docs i had to know that to integrate msshare point server with sap server we need duet enterpise.where i have to install duet enterprise and how to integrate through duet,first iam working on this scenerio,guide me for the same.it will be more help to me.
    Thanku

    Hi,
       Thanks for information,when iam going to install : DuetConfig.exe /install on MS Share Point server iam getting error :
       The SharePoint farm is not accessible. Please verify that you have the necessary permissions to access the farm.
        I Gave the full permissions to login user still iam getting same error,guide me for the same.
    Thanku

  • Why does a circle form at the point of contact

    Photoshop CC 2014. When I am drawing on a new layer with a pencil in multiply mode, a brush / pencil size window opens and an annoying circle forms at the point of stylus contact.  It is annoying because it detracts from the creative moment and I would like to know if I can stop it happening.

    Immediately the size window opens.
    Which window? Please post a screenshot.
    Is the tablet’s driver up-to-date?
    Because now I have changed back to Painting and the pen behaves normally without the circle and size window.
    So the issue is resolved?

  • Point to the latest SAP gui

    Can anyone point me to where I can find the latest SAP GUI (7.10?) . I have just been given a laptop with no CD drive, and I don't have my memory stick with me at the moment.  Anyone?.
    Gary

    Hi,
    service.sap.com -> software download -> sap installation and upgrades -> Entry by Application Group -> SAP Frontend Components -> SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.10 CORE -> Installation ->       50095979_4       NW 7.0 Presentation - 7.10 Compilation 4 Present. 1/2
    Let us know if this information is useful to you
    with regards,
    Parin Hariyani

  • What are points to focus on SAP CRM E-Commerce

    I need to work on CRM E-Commerce  java components for support. To get the KT from the development, what are the places i need to concentrate for getting the valid information. Like, What are the area's, I need to  concentrate and make sure that all the information is captured for supporting the application.
    Thanks.

    Unlike ESS/MSS where you can literally hack through any class (correct me if I am wrong), Web Channel application has been designed to be "modified and enhanced" without the need to change the standard class files (theoretically).
    when i spoke the development team, he is saying that, they modified only SHRWEB and CUSTPRJ rest of the components (CRMWEB, CRMAPP, SHRAPP,) not modified also recommended not to modify by SAP. I am unable understand why.
    The components that need to be modified depend solely on the application you are working on. In your case, I guess it is the b2b
    The E-Selling (b2b) application related components that can be modified (the key word here is "that can be modified") which happen to be the JSPs in the WebContent folder in the SHRWEB are the only components you need to modify "directly". The standard class files (Java) need not be touched according to the enhancement framework. Any custom classes you develop either as new or as extension of a standard class will all go to crm/home/shr/ext which is also in SHRWEB.
    I am unable understand why. Sice DEV & EXT guide saying . Any customer related changes can go to - crm/home/crm/ext in CRMWEB - crm/home/shr/ext in SHRWEB - Can you clarify , is this correct. ?
    From what was explained above in this thread, where the customer changes need to be depends on where the application exists. For example, for E-Service related apps,  icss it is not SHRWEB.
    Also i am trying to understand, There are lot of dc's availabl in sharweb. how to identify which dc is related to web order and which is related complaints and returns.? or some other process.
    I won't say the extension guide is written for general audience. I must agree with you on that. The guide is written by the experienced developers for "experienced" developers. Not for me or you. Like all other SAP documents, they are written for those who know the subject thoroughly. As you gain experience, you start appreciating the document. But, if you read slowly and properly, you will see what I have explained above very clearly. Try to understand the scenarios explained in the document.
    Is there any where documented in SAP docs. I have red the DEV & EXT guide, there details are not available. That is explaining only the how to extend the application.
    Read the Tutorial too. See the different scenarios and see what techniques are used and try to analyze why.
    Same way the dc's which are in SHRWEB and CRMWEB related which modules or process. Is there any relation ship between these two .SCA files.?
    Generally based on group of applications. But that doesn't create any restriction, for you can always create dependency for any DC in your custom project.

  • Missing the point on contacts

    Hi
    Im running osx server 10.9.1, ive succesfully set up calendar sharing, now to contacts, ive turned contacts on in server and made the service available to all users i have client machines set up as osx server accounts, in internet accounts it says OSX Server Contacts, Calendars and reminders, on my machine ive copied all the contacts into All OSX Server, but when i look on another machine i cant see the contacts, im clearly missing something, can anyone help?

    From apple
    "Contacts service provides a simple–to–implement, secure, hosted contact solution. You can access personal and directory-based contacts across multiple computers within a workgroup, a small business, or a large corporation."
    Not from where im standing, ive had to create a pseudo user which i then put this user's login and password on every client machine so they can share the contacts, which is how i had it set up on 10.6 server, not really much of a step forward, the documentation is next to useless, as is most of the tutorials on the web, couple that with a messages service that just doesnt work, i cant say im very impressed with mavericks server.

  • All Modules Integration in SAP

    HI SAP Gurus
    Can somebody give me link where I can find the integration of all the functional modules of SAP.
    Basically I need the point of contacts in SAP in MM, SD, PP, HR and FICO modules.
    Some General or Basic points will do.
    Thanks in advance
    Vineet Guliani

    FI-MM: The integration between FI-MM happens in T-code OBYC.
    1. When PO is created :
    No Entry
    2. When GR is posted
    Inventory Account dr (Transaction Key BSX in OBYC)
    To GRIR account (T.Key WRX in T-code OBYC)
    3. When Invoice is posted
    GRIR account Dr.
    Vendor account Cr.
    4. Payment made to Vendor
    Vendor A/c Dr
    To Bank Clearing A/c Cr.
    Points to know : Movement Types, Assignment of Movement types to T-keys (T-code OMJJ), Value string (I also need some information on this) , OMWN and OMWB transactions.
    There is a close integration b/w FI & MM, actually document flows from MM to FI in the following areas such as,
    1. Movement Types:
    Used to enable the system to find the predefined posting rules determining how the accounts of financial accounting system are to be posted & to update the stock fields in the matrl master data.(Goods Receipt, Goods Issue, etc)
    2. Valuation Class:
    Assignment of material to grp of gl account, used to determine the gl accounts that are updated as a result of goods movement.
    3. Transaction/Event key:
    Used to control the storage or filing of documents & assignment of documents.Used to differeniate b/w various transactions such as goods movement tht occur in inventory.
    4. Material Type:
    Each material should assign mtrl type in mtrl master record used to update whether changes made in qty are updated in material master record & change in value also updated in stock account

  • Outlooksoft and SAP

    My company is in the process of "archiving" required financial information out of out legacy Outlooksoft product.
    Our  company converted to using SAP a few years ago which at the time replaced the Outlooksoft functionality.
    I need technical assistance that would point me to which tables need to be accessed in order to extract key information for archival.
    Please point me to an internal SAP/Outlooksoft technical subject mater expert or have a SAP/Outlooksoft technical representative contact me on the best way in assisting me on this endeavor

    Dear Bret Davies
    Wecome to the forum. As a new member of the forum, I would like to bring to your notice that your requirement is not aligned with the objective of the forum. The main objective of the forum is knowledge sharing.
    I have to lock the thread.
    Regards,
    Rakesh

Maybe you are looking for