Output type RD00 Error sending email "External Send"
Hello friends,
There is an output type RD00 for Invoice. It sends two outputs Print out and Mail. Print out work fine but Mail is running into errors.
actual error msgs are here below:
1. Please enter the address number
2. Communication type cannot be used
there is a zprogram configured against "External Send" in output type. I am trying to debug it but it doesn't stop the break point.
Need help in this regard and appreciated.
Thank you
HI,
After triggering the output,goto T.Code SOST and process it.
So that e-mail will be triggered immediately.
You can use External send/EDI/simple mail for this.
First of all the email service should be confirgued by basis team. Second you need to create Y3 partner to send electronic invoice. That can be created in customer master and also you have to specify email address in customer master. once this is done then set up output conditon record for RD00 to spit out electronic invoice in VV31.
You can refer link
http://help.sap.com/saphelp_nw70/helpdata/en/55/a8b538891b11d2a25a00a0c943858e/frameset.htm
Regards,
Saju.S
Similar Messages
-
How to send invoice through email with output type RD00?
What are the configuration settings to send invoices through email with output type RD00?
Hi,
Please go through the following links:
[E-mail|Email Configuration Settings]
[e-mail|Re: EMAIL BILLING DOCUMENT TO CUSTOMER THROUGH SEND MAIL OPTION IN VF02]
After triggering the output,goto T.Code SOST and process it.
So that e-mail will be triggered immediately.
You can use External send/EDI/simple mail for this.
Regards,
Krishna. -
Maintain archiving parameter(s) for output type RD00(appl.V3)
Hi Guys,
While trying to get the output for billing documents I'm facing a error : Maintain archiving parameter(s) for output type RD00 (appl.V3)
Diagnosis
At the time of output determination,the archiving parameters for output type RD00(application V3) were incorrectly maintained in customizing.
Additional information:
SAP object:
Archiving object:
Procedure
Maintain the archiving parameters and repeat output determination for the required document.
Expecting the solution.
Regards
Raj.Can you check what you have in the Storage System Tab in the fields Storage Mode and Document Type.
It should be Print Only and SDOINVOICE respectively.
Thanks -
Find the SAP Script name for the Output type RD00 and Appli V3
Hi Gurus,
My requirement was to copy the Std SAP Script for the output type RD00 and application name V3 and to do some modification.
Please any one suggest me how to find the Std SAP script based on the above Output type and Appl ?
Regards
paulHi,
The script Name is LB_BIL_INVOICE
You can find byNACE>V3>Output Types>RD00-->Processing Routines
In thje output type Press Change button and select New entries.
Regards
Sandipan
Edited by: Sandipan Ghosh on Mar 31, 2008 12:06 PM -
HT2500 I can not send emails. the send button is not highlighted.
I can not send emails, the send button is not highlighted. I always have to use my yahoo. acct.
Hi there Matidp,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
-Griff W. -
Send purchase order via email (external send) with special Czech characters
Hi all,
I am sending a purchase order created with ME21N via email to the vendor using "external send".
The mail is delivered without any problems, PO is attached to the mail as PDF file.
Problem is that special Czech characters as "ž" or "u0161" are not displayed, a "#" (hash) appears instead.
This problem occurs when language for PO output = EN.
Tests with language = CS worked out fine, but the whole form incl. all texts are in Czech as well; so no valid solution since it needs to be in English.
We checked SAPCONNECT configuration and raised note 665947; this is working properly.
When displaying the PO (ME23N) special characters are shown correctly as well.
Could you please let me know how to proceed with that issue?!
Thanks.
FlorianHi!
No, it's not a Unicode system.
It is maintained as:
Tar. Lang. Lang. Output Format Dev. type
Format
PDF EN English PDF1
Using this option, character "ž" was not displayed correctly, but "Ú" was ok.
All other Czech special characters are not tested so far.
Thanks,
Florian
Edited by: S. SCE - Stock Mngmnt on Aug 14, 2008 10:19 AM -
SCOT: When email status error, send email to sender
Hello everyone
I would like to know if it is possible to configure SCOT to send an email to the sender when an email ending as error.
Here is the scenario.
1. An email is sent through scot.
2. SCOT process the email and comeback with an error. Example msg 841 (message too long)
3. So, when the email status is an error, an email should be sent to the sender to advise him of the problem.
So, the sender will be able to act quickly and perform corrective action.
Any idea on how to configure this?
Regards
dstjHello Volkoale
Sorry, it is in project plan at the moment. I didn't have time to do it.
Here is some speudo code:
Select all record from SOST table where MSGTY = 'E' " Message type Error
and entry_date = sy-datlo
and entry_time is between now and 15 minutes ago.
select al record from SOOS where corresponding to SOST.
field SOOS-sndnam correspond to the sender of the message.
The table SOOD contain the title of the email (Field "OBJDES" )
When you have all those records.
you can send an email to the sender.
I hope that can help you. -
How to send email externally in the RTF format
Hello,
I have quite strange problem, and I am bit afraid whether SAP supports or not? which i thought will support by default.
I need to send email out of SAP, but I need the body of the EMAIL to be formatted in RTF.
Please note we are able to convert the data into RTF and then send as an attachement with email,
But what we are looking is instead of attachment we need to send content as the mail body in the format RTF.
Please any body help on this?
Thank you again for your kind time and helpHi KAMESH,
Thank you for your very quick response,
We tried this option, by sending a mail with bold text, but the output still comes as normal text..
Please can you send any working example of this.. if you think this should work,
Thank you again for your time.. -
Mailing Invoice through output type - Getting Error "No address exists"
Hi Experts,
I am trying to mail the invoice using out put type. I am using the standard out put type MAIL, Print program RSNASTSO and routine SAPOFFICE_AUFRUF_VX for external send 5 and using SP partner type. I maintained email address in Customer master. When I am assigning output type to send mail its failing and am getting an error as following.
Object 1001101366
Output type: Mail
Processing log for program RSNASTSO routine SAPOFFICE_AUFRUF_VX
Function module SO_NAME_CONVERT with return code
Text 110V31001101366 MAILE0000200290 ID STAM lang
No address exists
Error while copying recipient object
Specify at least one recipient
Message object FOL35000000000004SCR36000000000089 created or sent
And the mail is not triggering. Please help me out to resolve this issue. I am an Abaper, SD consultant is not available for me now.
Thanks and Regards,
hemanthCheck whether Note 960088 - FAQ: Sending SD messages externally, helps you
thanks
G. Lakshmipathi -
Can't send email; no send button
I just got a new iMac and tried to send an email for the first time. I clicked New Message and could type a message but can't send it. No send button. By the same token, I can receive mail and reply to them because when I hit Reply I have a send button on that. What gives?
No Send button or a greyed-out, non-clickable Send button? And if you select menu item Message is there a Send item in the menu list? If it is there, can you click it?
(Note that send is not active until you have entered a recipient)
AK -
Send email default sender to match email settings of logged in user
Hi,
I was wondering how i could add this into my site.
If you look at other sites the user can put in their email settings and then view their inbox from within the site when logged in.
1st Question is: What settings do I need to store in a table for the user to setup their email settings. I assume the obvious server name, username and password.
2nd Question is: Does anyone know how to add in an email view, free would be good.
3rd Question which is the most important to addt is this: I want the user to input their email settings in their user profile page so hence need to know what settings to store in the table. From their i want to when using the addt send email SB to check the user logged in session and match the userid and use their settings to send the email.
I know how to use the recordset to get the settings of the person who has logged in as that is not too difficult but instead of using the kt default sender which you input in control panel i would want it to use the person who has logged ins email settings, how can i stop addt from using the default sender and what code would i use in my page for addt to send the email using that person email settings?
Hope someone can help.
Many thankshi,
thanks for getting back to me. what i was hoping was that the user could send the email via the site suing their own email settings?
so say the domain is domain.com which the newsletter application sits on. but the user has his own domain of example.com with his own email settings.
what i have done is create a mini newsletter system using addt. i wanted to allow the user to input their own mail server settings and when it clicked send addt would use the email settings to send the email via php.
there is newsletter system like "constant contact" which you can use to send using their system however it comes into the inbox as if from the person who sent it.
hope you can help.
many thanks -
Output type processing error for adobe forms
We have created one output type in NACE transaction for Application V1(Sales) and attached the Adobe form to that output type. Whevener i am creating or saving a quotation / Sales order that output type is not processesed rather it is giving an Express document error that 'Update was terminated'.
Please help me out to solve it.It is processed as there was a issue in the program.
-
Output type config error:No communication data has been defined for transmi
Hi Gurus,
i have copied an existing output type ZOCT to ZORD . when i change the sales order the output is automatically triggered but is not processed successfully instead it is in red. when i see the processing log i could see the error below.
green Object 0000000133
green Output type: UK Sales Order
green Processing log for program RSNASTED routine ALE_PROCESSING
RED No partner profiles (message control) maintained
I tried adding communication data in VV11 but i get the below error.
No communication data has been defined for transmission medium A
Message no. VK603.
I am using ordrsp and orders05 in partner profiles and in message control tab i am giving
V1 ZORD SD10 values.
Please suggest me to correct these errors. Your help is much appreciated.Thanks.
Regards.
SanjeevHi V V Reddy,
Thanks a lot for your inputs. I have debugged the program rsnasted at routines and in EDP12 there were repeated entries .
So i deleted all the partner profiles and created and generated them agian.
I have also missed to maintain SP partner function in output type partner functions. I do not see any errors now.
Thank you very much.
Regards,
Sanjeev -
Map Zsmartform to output type RD00
Hi All,
I have to map my zsmartform to ouput type RD00 so that it can be triggered from Invoice transactions. Currently in Nace transaction the output type is mapped to standard form. What steps do I need to do configure it to my zform?
Thanks in advace.
-Minhaj.I think you have to change the program name as well. The default for RD00 is usually RVADIN01. This is for SAPscript output.
The SAP delivered SmartForm for invoices is LB_BIL_INVOICE. It uses the print program RLB_INVOICE.
I do not know if you have created a new ABAP print program for your custom Z SmartForm. If the smartform interface is the same, you can use the standard. If not, you have to create one. -
Message on iPhone: unable to send email - exceed sending limit. How do I fix?
Getting message Unable to Send Email ... exceeded sending limit. How do I fix?
Settings>Messages>Send & Receive at>You can be reached by iMessages at> Select your iPhone number if it appears in the setting. If it does not appear, sign out of messages on the phone and the iPad, start all over again and sign in on the phone first to make the number accessible on the iPad.
Link your phone number and Apple ID for use with FaceTime and
Maybe you are looking for
-
Dear Sir, Kindly clarify the following issues. 1. While doing stock transfer of a material Z from plant X to plant y, the following error is displayed No shipping point could be determined for material Z in plant X 2. Can we change the material grou
-
How to show additional column in the Query searchby field selection window?
Hi Experts, I have a simple query as below: select * from ocrd where cardcode between '[%0]' and '[%1]' Now, it is evident that the searchby field is the cardcode, so when I click on the browse button, all cardcodes will be displayed for me to choose
-
IC Recorder ICD-P17 - driver issue
Hi, I've got a Sony IC Recorder ICD-P17. I am running Windows 7 Enterprise Edition. I plug in the Recorder via USB to my computer and the screen says PC LI and then what looks like a WR. My device manager shows the Recorder but says I do not have the
-
I cannot register my new phone as a message comes up saying Can anyone help me here?
-
We recently upgraded to a new version of our business software package, and with this upgrade, Adobe cannot find the font we were using. This font was Abadi MT Condensed Lite. Any suggestions or guidance?