Output xml file from data in a drag/drop AIR app.
I am interested in creating a WYSIWYG drag/drop AIR app. in
which I can drag art and other components, then export the (x,y)
positions of the components and other info into an xml file. I am
interested in using .ai files instead of raster based art. Will
Flex/AIR app. support this format? I am just starting to work with
Flash, Flex, etc. Is this way over my head? Possible?
Thanks,
Nate
I don't think you can manipulate .ai files in Flex /
AIR.
Similar Messages
-
How to remove an XML file from Data Template in Data Definition Screen
Hi,
Issue: I have uploaded the file in Data definition in Data Template.
How to remove it.
Also what does each file type mean?
XML Schema
Data Template
Preview file
Bursting control File
I have an XML file and XSL file. I need to have an output in XML.
So I installed my XML file in data template in data definition.
And XSL file in Templates.
Am I correct?
11.0.10.2
Regards,
AvijitIssue: I have uploaded the file in Data definition in Data Template.
How to remove it.You cannot remove it but you can end-date it.
Also what does each file type mean?
XML Schema
Data Template
Preview file
Bursting control FileThis is explained in "Oracle XML Publisher Administration and Developer's Guide Release 12" manual -- http://docs.oracle.com/cd/B34956_01/current/acrobat/120xdoig.pdf
I have an XML file and XSL file. I need to have an output in XML.
So I installed my XML file in data template in data definition.
And XSL file in Templates.
Am I correct?Correct -- See Chapter 2 "Creating the Template" and Chapter 5 "Data Templates and Chapter" in the same doc referenced above for details.
Thanks,
Hussein -
Not receiving the output xml file from BPM
Hello
I am doing a scenario where I'd be sending two files in text format to the BPM workflow which would be using Fork and Correlation to merge these two files into one file and send the output xml file as receiver. Problem is that the two files are successfully converted into the xml messages and are displayed in SXMB_MONI but the output file which would be received from BPM engine as receiver is not being generated and displayed in SXMB_MONI as well as RWB. Please suggest any probable solution.
Thanks.I don't think you can manipulate .ai files in Flex /
AIR. -
AIR Native Drag & Drop -- AIR app to Desktop
Hello,
I am trying to figure out how to drag from AIR app to
dektop/MSWord. I found lots of sample for desktop to AIR app, but
not vice versa.
Is there any samples that I can have? How can I drag texts in
a text area to desktop/MSWord?
Thank you!!Thanks for your answer.
i already tried something like this, but i still have
problems with getting the newly created entity dragged. how can I
position the new entity from my air app directly under the mouse
cursor? so far i didn't find any screen mouse position functions or
properties. If I use a fullscreen, always on top window with mostly
transparent parts, I can't capture the mouse position using
MOUSE_MOVE all the time. Besides, how can I change the focus from
my browser to my air app? I already tried calling
nativeWindow.orderToFront() and nativeWindow.activate(), but the
focus doesn't change when I click the entity in my flash page.
Maybe somebody knows an answer to this ... -
Junk Characters in the output XML file after Parsing
Hi
I am using DOM parser to parse an XML file.
After parsing the input XML file, i am fetching some contents
from the same and also putting the same contents in the parsed output file which is also an XML file.
The problem here is that the after putting the contents to the output XML file from the input XML file,
some junk character appears at the end of each and every tag in the outputfile.
The junk character is some thing like this : " ampersand hash thirteen and a semicolon "
(*THE MESSAGE DID NOT ACCEPT THE SYMBOLS KINDLY TRANSLATE THE ABOVE WORDINGS*
INTO SYMBOLS)
This character gets appended at the end of each and every tag in the output file due to which the output file
is not recognised as an XML file.
Please let me know as to why is this character appearing and also please suggest some solution
for the same.
-Thanks in Advance.
Edited by: itskarthik on Oct 10, 2008 7:16 AM
Edited by: itskarthik on Oct 10, 2008 7:18 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AMWierd.
Try this piece of code. (You can always change it to use input file and output file instead of string if you want)
What is your output?
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
public class XMLTest {
public static void main(String[] args) throws Exception {
String input = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\r\n" +
"<test>\r\n" +
"</test>";
System.out.println("Input:");
lookForCR(input);
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
Document doc = factory.newDocumentBuilder().parse( new ByteArrayInputStream(input.getBytes()) );
Source source = new DOMSource(doc);
ByteArrayOutputStream bArrOut = new ByteArrayOutputStream();
Result result = new StreamResult( new StripOutputStream( bArrOut ) );
Transformer xformer = TransformerFactory.newInstance().newTransformer();
xformer.transform(source, result);
System.out.println("\nResult:");
lookForCR(bArrOut.toString());
System.out.println("\nDone");
public static void lookForCR(String input) throws Exception {
char[] chars =input.toCharArray();
for ( char chr : chars ) {
if (chr == 13 ) {
System.out.println("Has 0x0D character!!");
class StripOutputStream extends OutputStream {
OutputStream out = null;
public StripOutputStream(OutputStream out) {
this.out = out;
@Override
public void write(int b) throws IOException {
if ( b != 13 )
out.write(b);
}- Roy -
Create XML file from table data
Dear All,
with dataservice 4.0, I want to create an XML file from a table data.
Table have a single column but more record, for example:
0001000488;100;EUR;
0001000489;200;EUR;
0001000450;300;EUR;
My desired XML output:
<Data>
0001000488;100;GBP;
0001000489;200;EUR;
0001000450;300;EUR;
</Data>
I try with a sample query but the sistem write only the last record in XML file:
<Data>
0001000450;300;EUR;
</Data>
Can everyone help me?
Thank in advance.
SimoneHello
That is a very simple (also odd) XML document structure, and as such doesn't require use of the XML target. It can be easily acheived by writing a normal file with a header and footer, which is acheived using a row_generation and a query to generate the hard coded open and close tags.
Michael -
How to export a data as an XML file from oracle data base?
could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
BalaSQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2 doc DBMS_XMLDOM.DOMDocument;
3 xdata XMLTYPE;
4
5 CURSOR xmlcur IS
6 SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7 'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8 ,xmlelement("EmployeeNumber",e.empno)
9 ,xmlelement("EmployeeName",e.ename)
10 ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11 ,xmlelement("Location",d.loc)
12 )
13 )
14 FROM emp e
15 , dept d
16 WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19 OPEN xmlcur;
20 FETCH xmlcur INTO xdata;
21 CLOSE xmlcur;
22 doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23 DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
. -
Creating XML file using data from database table
I have to create an xml file using the data from multiple table. The problem That i am facing is the data is huge it is in millions so I was wondering that is there any efective way of creating such an xml file.
It would be great if you can suggest some approach to achieve my requirement.
Thanks,
-VinodAn example from the forum: Re: How to generate xml file from database table
Edited by: Marco Gralike on Oct 18, 2012 9:41 PM -
How to edit the existing data in the XML file from java programming.
Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
<mydata>
<data1>
<key1>467</key1>
<name1>Paul</name1>
<id1>123</id1>
</data1>
<data2>
<key2>467</key2>
<name2>Paul</name2>
<id2>123</id2>
</data2>
</mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr -
How to read .xml file from embedded .swf(flash output) in captivate
I have been trying to read .xml file from the .swf (Flash output) that is embedded within the captivate file but no luck yet . Please if anyone got any clue on how get this thing done using Action script 3.0 then let me know. I am using Adobe Captivate 5.5 at present and Flash CS 5.5.
I am well aware about how to read .xml file through action script 3.0 in flash but when insert the same flash in captivate and publish nothing comes in captivate output. I would higly appreciate if anyone could help me out with that.
Here is is graphical demonstration of my query :
Message was edited by: captainmkvHi Captainmkv,
Does the information in this post cover what you're trying to do: http://forums.adobe.com/message/5081928#5081928
Tristan, -
Generate XML file from Billing Output
Hello,
We have a business requirement to generate XML file from billing output and the same needs to send to external system for document printing. In this regard, could you please guide the steps to configure or share the document on how the system to be configured to support the XML file generation from billing document.
Anticipating a positive reply
Thanks in advance
Best Regards,
Gouthamanother option is to configure an outbound IDOC and set the port for this IDOC to generate an XML file.
here again there will be IDOC control record in the first section of the IDOC XML generated.'
rgds -
Receiving xml file from B2B - assign the data to a variable
Hi,
I am receiving an xml file from B2B and assigning the file content to a variable.
I have a B2B adapter - mediator - bpel process. In the bpel process I am assigning the inputVariable to a userdefinedvarible.
But I am not getting the value correctly. Only the root tag of the xml is shown as the value for the userdefinedvarible.
In the composite audit level,
<process>
<scope name=main>
receiveInputreceiveInput
Sep 17, 2010 9:31:10 AM Received "inputVariable" call from partner "processorder_client"Received "inputVariable" call from partner "processorder_client"
View XML Document (******* the xml doc shows the complete xml********)
Assign_1Assign_1
Sep 17, 2010 9:31:10 AM Updated variable "Order"Updated variable "Order"
<payload>
<Order>
<orders/> (******* the variable shows only the root element********)
</Order>
Sep 17, 2010 9:31:10 AM Completed assignCompleted assign
Sep 17, 2010 9:31:10 AM BPEL process instance "40004" completedBPEL process instance "40004" completed
I have connected the mediator interface to bpel interface and did not do any other special config? Is that ok?
Can anyone please tell me the procedure to assign the xml file content from a b2b message to a bpel variable Or direct me to any samples on this?
I dont understand if the prob is in mediator or assigning? I do see the inputvariable having the complete xml...!!
Thanks in advance.
GaneshHi Ganesh,
Might be problem with the parts.
receiveInputreceiveInput
Sep 17, 2010 9:31:10 AM Received "inputVariable" call from partner "processorder_client"Received "inputVariable" call from partner "processorder_client"
View XML Document (******* the xml doc shows the complete xml********)Check the part in the xml and part you defined for inputvariable.
Regards
PavanKumar.M -
Creating an XML file from multiple sql tables
I have very little xml experience, but need to generate an xml file from multiple table. I know what the output needs to look like, but do not know how to setup the code. Any help would be appreciated.
- <Practice SourceID="EPIC" ExternalPracticeID="PPAWB">
- <Provider ExternalProviderID="TB2" FirstName="THOMAS G" LastName="BREWSTER">
- <Patient ExternalPatientID="99999" OldExternalPatID="" FirstName="test" MiddleName="J" LastName="test" Gender="M" DateOfBirth="2005-08-12" SocSecNumber="000-00-0000" LanguageID="22" AddressOne="test" AddressTwo="" City="test" StateID="20" ZipCode="99999" DayPhone="" EveningPhone="207-999-9999" StatusID="">
<Measure MeasureID="2" MeasureValue="5" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="2" MeasureValue="5" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="3" MeasureValue="1" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="3" MeasureValue="1" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="32" MeasureValue="3" MeasureDate="2008-10-24 13:51:00" />
<Measure MeasureID="33" MeasureValue="1" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="33" MeasureValue="1" MeasureDate="2009-02-09 10:09:00" />
<Measure MeasureID="4" MeasureValue="5" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="4" MeasureValue="5" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="40" MeasureValue="2008-10-24 13:43:00" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="40" MeasureValue="2008-10-24 14:23:00" MeasureDate="2008-10-24 14:23:00" />
<Measure MeasureID="41" MeasureValue="2008-10-24 13:43:00" MeasureDate="2008-10-24 13:43:00" />
<Measure MeasureID="41" MeasureValue="2008-10-24 13:51:00" MeasureDate="2008-10-24 13:51:00" />
</Patient>
</Provider>
</Practice>You are interested in XMLElement and probably XMLAgg. Since you didn't list a version, I can't provide links to the corresponding documentation. I cringe at all the attributes on the Patient element as that info should really be elements.
To create the Measure node, your overall SQL statement may look something like (not tested)
SELECT XMLElement....
XMLAgg(SELECT XMLElement
FROM measures_table
WHERE join condition to parent)
FROM patient,
provider,
practice
WHERE join conditionsFor additional help, please include your version (4 digits), some sample data, and what you have tried. -
Re-Using XML file from decode barcode + extract xml process
I was hoping someone could put me in the right direction here. I am decodeing the information stored in a 2D Bar code and sending this information to an XML file, then I am trying to combine that xml file with a blank PDF template but the process is failing beacuse there are some additional tag fields the XML data from the Decode->Extract XML process.
The XML file from the decode process gives the structure below..notice therer some extra tags (lines 2- 4)
<?xml version="1.0" encoding="UTF-8"?>
<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
<xfa:datasets>
<xfa:data>
<form1>
The XML structure that is expected by the PDF template is as follows
<?xml version="1.0" encoding="UTF-8"?>
<form1>
So the xml output of the Decode barcode + Extract XML process has three extra lines of tag. Is there a way I could use a process within liveCycle to clean out those three lines in real-time before sending the xml to be recombined with the PDF template.
ThanksHi,
What you may do is to use the SetValue and its xpath builder functions to "serialize" the xml into string, "substring" to remove the extra tags, and "concat" to add the extra tags and then "deserialize" it again to an xml to be merged with your form.
Greetings,
Yasser -
Problem while reading XML file from Aplication server(Al11)
Hi Experts
I am facing a problem while reading XML file from Aplication server using open data set.
OPEN DATASET v_dsn IN BINARY MODE FOR INPUT.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET v_dsn INTO v_rec.
WHILE sy-subrc <> 0.
ENDWHILE.
CLOSE DATASET v_dsn.
The XML file contains the details from an IDOC number , the expected output is XML file giving all the segments details in a single page and send the user in lotus note as an attachment, But in the present output after opening the attachment i am getting a single XML file which contains most of the segments ,but in the bottom part it is giving the below error .
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/SHPORD_0080005842.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
for all the xml its giving the error in bottom part , but once we open the source code and if we saved in system without changing anything the file giving the xml file without any error in that .
could any one can help to solve this issue .Hi Oliver
Thanx for your reply.
see the latest output
- <E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/~1922011.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
E1EDT13 with QUALF>003 and <E1EDT13 SEGMENT="1">
with <QUALF>001 having almost same segment data . but E1EDT13 with QUALF>003 is populating all segment data
properly ,but E1EDT13 with QUALF>001 is giving in between.
Maybe you are looking for
-
Error while activating Transformations
Hi gurus, Iam facing a problem while activating Transformations. Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR. But iam getting following errors
-
Extending Line Items collection in Master Agreements
Hi All I wanted to add a custom field to Line Items Collection - but I guess it is not possible to add a custom field to a standard collection, next what I tried is to add an extension field to the Line Item Class(1007). But I could not find the Line
-
Keyboard backlight not working - settings missing on MacBook 2,1??
I have a macbook 2,1 that was given to me by a friend about 6 months ago. It is in perfect condition except some seperation around the edges. So, I took into the Apple store a couple of days ago and they replaced the entire 'inside' of the macbook; m
-
Hi everyone! This is my third post regarding not being able to set up my email and I found out a little more info today. We are using SBS 2003 for a server and this is maybe why I'm having problems. We use excange and access our email with Microsoft
-
I have an application where the base state is a login page, on successful login it takes you to a state called 'home'. I have an accordion in a panel in the home state and it doesn't work. Is this a known issue or am I missing something? Getting the