Overview City Model, Dashboards, Reports BW and Ad-hoc reporting
Hello everyone,
We have different informations views from CCLM.
Overview City Model, Dashboards, Reports BW and Ad-hoc reporting.
I would like to know Which cubes and tables are Involved in each one of theses reports.
I know Ad-hoc reporting (RAGS_CC_REPORTING) use the next tables: AGS_CC_QUALITY, AGS_CC_OBJECTS, AGS_CC_ATTRIB, AGS_CC_VERSION. AGS_CC_LAST_USG, AGS_CC_USAG, AGS_CC_SIMIL, any more?
About City Model, I think It use table AGS_CC_CRIT and AGS_CC_QUALITY and Cube 0SM_CCITY, but I am not sure if its totally true or there are more.
About DashBoards I think it use Cube 0SM_ESRSG, cube 0SM_CCLM ??, table AGS_CC_QUALITY ?? but I am not sure....
The goal is to know, for example ATC quality in table AGS_CC_ATC_SYS you can´t view in the ad-hoc reporting...
thanks and regards.
Gerardo.
Our client uses XI 3.2 but is experiencing issues with Hierarchical BEX queries returning blanks - the mdx is fine - just webi that seems to have a problem and I'm also trying to determine in exactly which instances this occurs.
XI 4.x supposedly resolves mots issues but here again details are not known.
I.e. hopefully someone can point to an info source that describes in more detail what issues are likely to occur re hierarchies and webi.
Similar Messages
-
Query for getting records max reported timestamp and 2nd max report
query for getting records in between
max reported timestamp and 2nd max reported timestamp
HERE IS ALL RESULT SET
TIME DOMAIN
30:jun:2006:20:08:45 TOMCAT
30:jun:2006:20:08:45 TOMCAT
30:jun:2006:20:07:04 TOMCAT
30:jun:2006:20:07:04 TOMCAT
30:jun:2006:20:07:24 TOMCAT
30:jun:2006:20:07:24 TOMCAT
30:jun:2006:20:07:45 TOMCAT
30:jun:2006:20:07:45 TOMCAT
30:jun:2006:20:08:05 TOMCAT
30:jun:2006:20:07:04 TOMCAT
30:jun:2006:20:08:05 TOMCAT
PD_REPORTED_TIMESTAM PD_USER
30:jun:2006:20:08:25 TOMCAT
30:jun:2006:20:08:25 TOMCAT
30:jun:2006:20:08:45 TOMCAT
30:jun:2006:20:08:45 TOMCAT
30:jun:2006:20:07:24 TOMCAT
30:jun:2006:20:07:04 TOMCAT
30:jun:2006:20:07:24 TOMCAT
30:jun:2006:20:07:45 TOMCAT
30:jun:2006:20:07:45 TOMCAT
30:jun:2006:20:08:05 TOMCAT
30:jun:2006:20:08:05 TOMCAT
PD_REPORTED_TIMESTAM PD_USER
30:jun:2006:20:08:25 TOMCAT
30:jun:2006:20:08:25 TOMCAT
QUERY RESULT TO COME
TIME DOMAIN
TOMCAT 30:jun:2006:20:08:45
TOMCAT 30:jun:2006:20:08:45
TOMCAT 30:jun:2006:20:08:45
TOMCAT 30:jun:2006:20:08:45
Message was edited by:
user517983Hi,
can we write query like this.
1 select pd_user,PD_REPORTED_TIMESTAMP
2 from sp_process_detail_current spdc
3 where host_id='DSCP02469'and pd_user='TOMCAT'
4 and exists(
5 select PD_REPORTED_TIMESTAMP from sp_process_detail_current
6* having max(PD_REPORTED_TIMESTAMP)-spdc.PD_REPORTED_TIMESTAMP=0)
SQL> /
PD_USER PD_REPORTED_TIMESTAM
TOMCAT 30:jun:2006:20:08:45
TOMCAT 30:jun:2006:20:08:45
TOMCAT 30:jun:2006:20:08:45
TOMCAT 30:jun:2006:20:08:45 -
Report painter and drill down reports
Hi SAP gurus,
Can any froward configuration of report painter and drill down reports.
iassign pointsHiii Sai Krishna,
can u forward the same documentation to me..plsss
my mail id - [email protected]
thanks in advance
regards
ramki -
SAP BO Report Scheduling and Save as report using Java SDK
Hi All,
We have a java product which is integrated with SAP BO using Java SDK and we have certain java screen through which we select report prompt values and webi report gets run.
Now we want to give a functionality to save report to BO repository.
When user select certain check box from java screen a separate copy of the webi report should get saved under default folder on BO repository.
Also, we want user to choose the scheduling option from java screen only (and not the one which we use from BI Launchpad) due to certain access restriction. User does not have access to BI Launchpad. Only he can run report by selecting values through Java screen.
If i need to create a separate screen for scheduling as well as saving webi report then also i am ok with it.
P.S. i guess we need to work on Java SDK level. But could somebody please help me with the right direction?
Let me know in case requirement is not clear.Hi Ketan,
As you are on version BI 4.0 SP5 and would be migrating to BI 4.1, the best SDKs to use would be the Restful Webservices SDKs.
You have the options to schedule a webi report with prompts as well as the save feature which you require.
Please refer to the webi restful guides avialble at
For BI 4.0 SP5
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4sp5_webi_restful_ws_en.pdf
For BI 4.1 SP4
http://help.sap.com/saphelpiis_sbo41sp4wi-sdk/frameset.htm
Refer to the below blog to understand the Restfull Webservices SDKs.
http://scn.sap.com/community/restful-sdk/blog/2013/09/07/scripting-web-intelligence-the-restful-raylight-web-services--learing-it
More blogs on Rest are available at
http://scn.sap.com/community/restful-sdk/content#filterID=contentstatus%5Bpublished%5D~objecttype~objecttype%5Bblogpost%5D
You can find the samples from the below link
http://scn.sap.com/community/restful-sdk/content#filterID=contentstatus%5Bpublished%5D~objecttype~objecttype%5Bdocument%5D
You would need to refer to the community below in case you have concerns about Rest SDKs.
http://scn.sap.com/community/restful-sdk
Thanks,
Prithvi -
How to add a new font into Report Builder and Oracle Forms/Reports Server?
Hi,
I've searched the forum and can't find this being discussed.
My developers run Report Builder 10.1.2.0.2 on their XP laptops.
Their reports run (in production) on Oracle Forms/Reports Server 10.1.2.0.2.
This server runs on MS Windows 2003, SP2.
They've got a client who wants reports using the "Garamond Western" font.
So....how do I get this font onto the developer's Report Builder laptops, and onto the Oracle Forms/Reports Server?
I've moved various 'Garamond' fonts into C:\WINDOWS\FONTS on both the laptops and the server, but neither seem to recognize it.
Thanks for your help.Thanks.
This answers 1/2 of my question.
The developer can now use Report Builder on his laptop, with the new fonts.
But when he moves this new Report to the Oracle Application Server/Forms-Reports Server, it fails to use the new fonts.
The Oracle App Server/Forms-Report Server is Version 10.1.2.0.2. It runs on MS Windows 2003, SP2.
I have installed the exact same fonts on this server, into C:\WINDOWS\Fonts.
I have used REGEDIT to change REPORTS_PATH....and placed C:\WINDOWS\Fonts; as the first value in this field.
I have then stopped and restarted the Forms-Reports Server. -
Difference between standard report S_ALR_87011963 and the custom report
Hi Friends,
My client requires a report which displays the acquisition and depreciation values of assets. Actually the requirement is to display all the values except planned depreciation.
Therefore we are taking the values only from the table ANLP. However the values in this report is not matching with that of the standard. In the standard report the Current Book Value should be selected to avoid planned depreciation. Am i right??
So once the CBV is checked the standard report will display only the posted values for a period.
But we are getting a huge difference in the depreciation value between the two reports.
Please help me out on this.
Regards,
PrasadI think your client requires to see Gross asset value and Deon posted in the report for all the years (not for current year only). If that is the case, current book value = APC - Depn posted earlier, so it gives wrong result.
Ex : Asset acquired in 2006 ; APC = 1000$ ; Depn posted in 2006 : 100$, so current book value is 900$.
So, I would suggest to have a look at the logical data base ADA or use ANLC, ANLV, ANLQ, etc or ANL* and search for the relavant tables required for your purpose.
regards
S -
Unable to select the SSRS report parameters and execute the reports.
Hi All,
We have set of SSRS reports and are been published to SharePoint 2010.After that I have enabled Anonymous user access at SharPoint side,after enabling Anonymous user access no one is able to access the reports so I have removed Anonymous user access
and the reports are working as normal in IE (internet explorer) but not working thorugh CITRIX (before Anonymous user access provided reports are working normal in CITRIX too), able to open welcome page of sharepoint and unable to select any parameters and
unable to execute the rpeorts.
Could you please suggest if you have any solutio as it is very urgent for me.
Regards,
Santosh
SantoshHave you tried the basics, such as clearing the browser cache? Note that depending on the version of SSRS in use, Anonymous is not supported with SSRS.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
HIS and AD hoc REPORTS in ABAP-HR
hi all,
can any body explain abt ad hoc and his reports?
what is the use of these reports?hi all,
can any body explain abt ad hoc and his reports?
what is the use of these reports? -
Excise report ER1 and Service Tax report SC-3
Dear Gurus,
I want to know the following things from the transaction code J2IER1 and J2IC
In transaction code J2IER1, their is one radio button, Details of other payments made. What does it stands for?
In transaction code J2IC, what are the prerequisite for Service Tax SC-3 return.
Waiting for your valuable reply.
Thanks & regards,
Vinayak VaidyaThe J2IER1 - Other Payments Made tab is there only for the format sake. This only complies to the legal requirement of ER1 return. However, no values are filled into this column in SAP from anywhere. This section is essentially meant for filling up the details of payments other than the Excise remittances (like penalties, interest etc.) for the Excise Department. If you have paid any, you can take a print out of this format when you generate ER1 from SAP and fill the details manually.
As for ST-3 returns, it is still not available in a fullfledged manner. You can refer the following note.
Note 1393534 - Service Category determination & Service tax returns (ST3)
This is essentially to support the Annual Return submission process for Service Tax.
Ravi. -
Does Crystal Reports have an ad-hoc reporting capabilty?
Post Author: Newbie
CA Forum: General
If so, how is it done. I couldn't find anything on the help menu. I am working with Crystal Reports XI. Thanks in advance.Post Author: Newbie
CA Forum: General
If so, how is it done. I couldn't find anything on the help menu. I am working with Crystal Reports XI. Thanks in advance. -
What is the significance of report writer and report painter
hi all,
can anyone throw light on report write and report painter, when and why it used with examples.
thanxs in advance
regds
hariDear Hari,
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
Report Painter fulfills a function similar to Report Writer, but is easier to use. Most of the functions found in Report Writer have been built into Report Painter; however, you do not need to be familiar with all Report Writer concepts (such as Sets) in order to use Report Painter.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
http://help.sap.com/saphelp_47x200/helpdata/en/56/32e339b62b3011e10000000a11402f/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Regards,
Naveen. -
Please help about Report Printer and PS tables-objects . ..
Hi everybody
I'm in trouble. I have a requirement in PS módule related with reports created by the Report Printer tool. I don't have any idea about these topics.
My requirement is to create a report (not with Report Printer) with the structure for projects, with all the structure Project-WBS-Network-Activity and with some values like Budget, Commit, Actual, Paid, etc.
The functional consultant only tells me about some reports created with Report Printer wich have the columns required, some report has the Budget, other one has the Commit, etc. For example, one report is the tcode S_ALR_87013532; i don't know if this transaction exists in all the SAP implementations or if it was created only for my company.
These reports only show two levels (Project-Network) so i i have to investigate:
1. How to get all the structure levels (project-WBS-network-activity)
2. How to 'translate' in code some value showed in a report created with Report Printer, i guess these values are created with formules and objects.
3. How to get the same values showed in these reports, but for the Networks and Activities.
I do not know anything about PS module and Report Printer and i really don't have any idea about how to make my development.
4. I think the functional consultant could be able to create the report himself with the Report Printer, but he tells me he does not manage this tool so good and he wants to send SAP mails with the reports, and he say the reports created with Report Printer can not send mails. Is this true ? and then, would be easier for me to learn Report Printer and create the report myself instead to develop it ?
Does somebody can help me ? Any idea ?
Please help !! I don't know even how to start with this.
Thanks in advance ..
FrankHi Frank,
here're some links:
-http://help.sap.com/saphelp_47x200/helpdata/en/ca/01993862b47c67e10000009b38f8cf/frameset.htm
-http://www.sapgenie.com/abap/tables_ps.htm
-Re: Project System Costs: budget/actual/commt/rem.plan/assd
Andreas -
Shipping and A/R report comparision
Hi All,
I have a scenario where I need to compare 2 customized reports ( shipping and A/R report) each day . I need to make sure that both the billing quantity and amount are compared on both these reports and if there is a discrepency on either of these fields, a email notification should be sent to the customer every day .
Any idea on how this can be done .
Note : Both the reports are run manually and doesn't have a batch job scheduled.
Thanks
Sridhar
Edited by: Sridhar Ganesh on Jan 9, 2009 10:55 PMDear sridhar,
it's possible by development program,
see first just create varriant for both the report , scedule on daily basis, & by program call this both the program to third program & then compare data & if diff then send email
regards,
amit -
Lines Between Report Columns in Purchase Order Report
Hello All,
I am working with the Oracle Purchasing Report called POXPRPOP.rdf. I am trying to add a black frame between each column in the report. Imagine in a purchase order where several columns of data that have a black line in between them. I have tried working with the expanding frame around the data fields of the report, changing the line color of these expanding frames to black. This didn’t work to give me lines in between the columns. I have been able to bring other graphical elements into the report so it is not a graphics problem at the UNIX environment.
I am using Reports 6i and Running the report through Oracle Applications Concurrent manager.
Thanks for any help,
BradleyIt seems like I might be able to put a line between the data fields and set it to expand with the repeating frame. Maybe this is this how it is done.
Bradley -
Hi,
Does Report Builder support ad hoc reporting on web application?
ThanksSSRS Ad Hoc Web Reporting has already existed. It is super easy to use and even a ten year old kid can create SSRS reports with it. You can also use it to create and modify SSRS reports from your mobile devices such as IPad, IPhone, Android Phone or Surface.
See this youtube on how easy SSRS reports can be creates.
http://www.youtube.com/watch?v=CxQLX5UxIik
You may try it yourself.
http://www.ssrsreporting.com
Maybe you are looking for
-
I recently downloaded the trial version of Adobe Dreamweaver CC on my 64 bit laptop and during download, it did not ask whether I wanted the 64 bit version or the 32 bit version downloaded. Although 64 bit may be faster, I would prefer 32 bit because
-
Document message bar not visible when participating in Shared Review
Hi, I have initiated a Shared Review using Acrobat Pro 8 Immediately after I finished sending out the notification to other reviewers, the _Review.pdf version of the document is opened for me and the Document Message bar is visible. Therefore I have
-
A simple question. I have my stage at 1280X1024 . Since my resolution is much higher, it displays white sections around the stage.. How can I make the stage to fill the entire swf depending on the computer's resolution please ?
-
My internet provider ( telephone company ) has come to check my lack of internet service at times and says there is a problem in the line between my house and the town , he also went on-line with his computer and checked the current speed of it and h
-
How to implement search help instead of match code objects table in program
Hi, We are now in upgrade process of code remediation ( From 4.6c to EC6.0). We have created search helps instead of matchcode object table. This match code object table M_VMVLC has been deleted in EC6.0. And search help VMVLC is available. In the p