What is the significance of report writer and report painter
hi all,
can anyone throw light on report write and report painter, when and why it used with examples.
thanxs in advance
regds
hari
Dear Hari,
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
Report Painter fulfills a function similar to Report Writer, but is easier to use. Most of the functions found in Report Writer have been built into Report Painter; however, you do not need to be familiar with all Report Writer concepts (such as Sets) in order to use Report Painter.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
http://help.sap.com/saphelp_47x200/helpdata/en/56/32e339b62b3011e10000000a11402f/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Regards,
Naveen.
Similar Messages
-
What is the significance of Draft, final and Final Post for Create Accntg?
hi
can someone give me a words for this query?
thanks
emgeeDraft - Used only for the user to view what would be the accounting for the transaction that has been entered. Does not have any accounting impact as it does not actually create the accounting. Modification can be made to the invoice.
Final - The invoice is accounted but the accounting entry is not transferred to GL. It is residing in the subledger module only. Need to run the program transfer to GL to transfer these accounting entries to GL
Final Post - Accounting created and transferred to GL -
What is the condition for First write statement in reports?
What is the condition for First write statement in reports?
In
TOP-OF-PAGE & START-OF-SELECTION.
U have to write what ever u want to dispaly.
Top-of-page will trigger first and write the statements.
SAmple report program for reference.
REPORT ztemplate
NO STANDARD PAGE HEADING
LINE-SIZE 130
LINE-COUNT 65
MESSAGE-ID zm.
* The Data Declarations
TABLES: mara." General Material Data.
* Type Declarations:
TYPES : BEGIN OF ty_mara,
cb(1),
matnr LIKE mara-matnr,
mtart LIKE mara-mtart,
matkl LIKE mara-matkl,
END OF ty_mara.
* Internal Tables:
* The following structure type must be defined in the data dictionary
DATA : i_output TYPE ty_mara OCCURS 0 WITH HEADER LINE.
DATA: lines TYPE i, free TYPE i.
* The Selection Screen Definition
SELECTION-SCREEN BEGIN OF BLOCK b_main WITH FRAME TITLE text-b01.
*SELECTION-SCREEN skip.
SELECT-OPTIONS: s_matnr FOR mara-matnr. "Material No
*PARAMETERS: P_XXXXX like XXXX-XXXXX. "Description
*PARAMETERS: CB_XXXX as checkbox. "Description
*PARAMETERS: RB_XXXY radiobutton group XXX default 'X'. "Description
*PARAMETERS: RB_XXXZ radiobutton group XXX. "Description
*SELECTION-SCREEN COMMENT fmt name.
SELECTION-SCREEN END OF BLOCK b_main.
*SELECTION-SCREEN ULINE.
*eject
* INITIALIZATION
INITIALIZATION.
* AT SELECTION-SCREEN
AT SELECTION-SCREEN.
*Validate material no details
IF NOT s_matnr[] IS INITIAL.
LOOP AT s_matnr.
IF NOT s_matnr-low IS INITIAL.
SELECT SINGLE matnr INTO v_matnr
FROM mara
WHERE matnr = s_matnr-low.
IF sy-subrc NE 0.
MESSAGE i128.
LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
IF NOT s_matnr-high IS INITIAL.
SELECT SINGLE matnr INTO v_matnr
FROM mara
WHERE matnr = s_matnr-high.
IF sy-subrc NE 0.
MESSAGE i128.
LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
* START-OF-SELECTION
START-OF-SELECTION.
REFRESH: i_output.
CLEAR : i_output.
SELECT matnr
mtart
matkl
INTO TABLE i_output
FROM mara
WHERE mara~matnr IN s_matnr.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-002.
" No records found for selected criteria
leave list-processing.
ENDIF.
IF NOT i_output[] IS INITIAL.
LOOP AT i_output INTO wa_output.
WRITE:/001 wa_output-cb AS checkbox,
003 wa_output-matnr,
015 wa_output-mtart,
024 wa_output-matkl.
CLEAR wa_output.
ENDLOOP.
ENDIF.
* END-OF-SELECTION
END-OF-SELECTION.
lines = sy-linno - 1.
SET PF-STATUS 'ZSTATUS'.
AT USER-COMMAND.
wa_output-cb = space.
SET PF-STATUS 'ZSTATUS' EXCLUDING 'SAVE'.
DO lines TIMES.
READ LINE sy-index FIELD VALUE wa_output-cb.
IF wa_output-cb = 'X'.
MODIFY i_output FROM wa_output INDEX sy-tabix TRANSPORTING cb.
ENDIF.
ENDDO.
CASE sy-ucomm.
WHEN 'SAVE'.
DELETE i_output WHERE cb = 'X'.
WHEN 'BACK'.
LEAVE SCREEN.
ENDCASE.
* TOP-OF-PAGE.
TOP-OF-PAGE.
ULINE.
FORMAT INTENSIFIED OFF.
FORMAT COLOR COL_HEADING.
WRITE:/001 'CB' ,
003 'Material No',
015 'Mat type',
024 'Mat group'.
FORMAT COLOR OFF.
FORMAT INTENSIFIED ON.
ULINE. -
What are the advantages of varying write speeds and burn speeds?
What are the advantages of varying write speeds and burn speeds?
The slower the speed, the fewer burn errors (or, in other words, you'll burn fewer "coasters"). I've always tried to burn at a slower speed, i.e. 2x - 4x. I'd rather wait a few minutes more and I've never had any burn errors.
-
What is the significance of the Assembly Deployment Target and Feature Scope?
Hello,
We have created a project as Farm Solution (not sandbox).
Under project properties we can see an option for Assembly Deployment Target : GAC or WebApplication.
I know that GAC will deploy the dll to windows\assemblies and WebApplication will deploy to website/bin folder.
Now, we add a feature to the project; in here we can see a dropdown for scope with options as: Farm; Web; Site; WebApplication. I know that depending upon what option is chosen; the feature can then be activated by going to the respective manage features
option via SharePoint front end UI.
Can you tell me what is the significance of the Assembly Deployment Target and Feature Scope?>>Can you tell me what is the significance of the Assembly Deployment Target and Feature Scope?
Feature scope can be decided based on the type of artifacts you will be building
Check the below link for what type of artifacts can be build at different levels of scopes
http://msdn.microsoft.com/en-us/library/ms454835(v=office.14).aspx
wrt to Assembly Deployment Target depends on what type of components you are deploying through your solution which will be specified in manifest.xml. There are advantages
if you deploy the components to web application rather GAC like all Apppools will not get recycled, avoiding IIS reset etc. But if you have 3rd party dlls and feature receivers which need to deployed along with the solution then its advisable to deploy to
GAC
http://trentacular.com/2009/06/sharepoint-differences-between-global-and-web-application-targeted-solution-deployment/
https://www.captechconsulting.com/blog/james-brocato/sharepoint-without-the-gac
Hope this helps.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful -
What is the significance of having Ver 1 and Ver 2 in a Bal Sheet?
Hi,
1. What is the significance of having Version 1 and Version 2 in a Balance Sheet(Income Statement)?
Any real life significance of these versions?
2. I had a previous question which was not answered, can verify if having version 1 and version 2 in a query addresses that problem:
u201C Is there a way to compare two different income statements (or two Bal Sheets) for say, Year 2005, if Income statement 1 is from R3 but Income statement 2 is from a non-sap system. i.e. to create a variance for them as a means of reconciliation? u201C
If Version 1 and Version 2 in a balance sheet does not deal with this, can you help with it?
ThanksHi,
thanks for the response.
Does this versioning process also takes place in Balance Sheet or it is something done only for Income Statements?
Is this the reason why some queries have varaibles to enter Version 1 and Version 2?
If Version 1 and Version 2 are from the same datasource, and you bring all into a DSO, what will be the advantage to separate the Version 1 and Version 2 data different cubes?
To help me get your response well, is the Versioning concept used in addressing the other part of my question:
i.e. if having version 1 and version 2 in a query addresses that problem:
u201C Is there a way to compare two different income statements (or two Bal Sheets) for say, Year 2005, if Income statement 1 is from R3 but Income statement 2 is from a non-sap system. i.e. to create a variance for them as a means of reconciliation? u201C
If Version 1 and Version 2 in a balance sheet does not deal with this, how do you address this?
Thanks -
What is the best combination of read and write objects to binary files ...
Hi everyone,
what are the best combination of read and write objects to read/write a record of customers from a binary file. I should be able to use StringTokenizer. I am bit confused with all these Stream reader and writers.
abdulYou are, indeed, confused:
o StreamTokenizer works on character input, not binary input.
o Readers and Writers in general work on character streams, not binary.
That leaves you various input streams and output streams for reading binary data. -
What is the significance of the blue, green and grey highlighted names in the directory used to text or iMessage? This is not about the messaging themselves, but the names to select to text or iMessage.
The entries in blue are people you've recently exchanged iMessages with, the ones in green are people with whom you've recently exchanged SMS messages and the ones in grey are people with whom you have not recently exchanged any messages.
-
How , When and What is the significance of Business Partner's Sales Area Data?
Dear All,
What is the Sales Area data of busines partner , What is the significance of the same?
When it gets modified or extended?
How to maintain its configuration? How maintain its data!!
Hence i want to understand almost all about sales Area data of business partner.
Regards,
Dhruvin
Moderated: Please use the search before posting.
Message was edited by: Andrei VishnevskyHello Dhruvin,
I think you shall have a look on the current help about this issue as it is a Complex ssue meaning "extense" and also one of the basic Points on the customizing and deployment of a CRM System:
Organizational Management in SAP CRM - SAP Library
Basically the Sales Area Data identifies your BP in your Sales Organization.
You define your sales organization so its fits your business requirements and real structure. f
Having this information properly defined helps to link data between SD and CRM so you can have for example: - The proper price for a customer when creating and Oportunity/ Sales Order.
- To restrict the access of the information of an employee.
Hope these hints help..
Regards -
Distribution function - What is the significance of "USER" field in Distribution template?
Hi,
I am working with the distribution functionality in BPC 10.
Here i am saving the reports in a folder on my desktop. For this we need to create a template which includes multiple report names, fixed members and variable members.
In the variable member section, we have a field for User.
For this field
1. when i do not specify anything it does not let me distribute,
2. when i specify a user name it creates 2 folderrs on my dektop one with the template name and one for the user
3. when i specify a space (" ") this creates only 1 folder during the distribution that is of the Template name (Which is what is required)
However what i do not understand is how this works without a username? What is the significance of this field in the distribution template?
Thanks in advance,
ShwetaHi Ram,
I have used this field for, what is the effect of the breakdown or problem when users are creating the notification. Example are given below. The same filed will come in IW28 report for analysis purpose.
1 No Effect
2 Production Restricted
3 Production Breakdown
Hope it will help you to understand.
Best Regards
Kalyan -
What is the diffreence between call transaction and session method
hi gurus
can any one suggest me
what is the difference between call transaction and session methods
in which cases we have to use teh call transaction and
in which cases we have to use session method.
thank you
regards
kals.CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Regards,
Sunil Kumar Mutyala -
What Is The Difference Between Budget Cost And Regular Cost For Resources?
What's the difference betwee budget cost and regular cost for resources?
Here is the explanation which I didn't understand from the book;
In planning your departmental retreat, suppose you
have specific budget targets
for certain cost categories, $2,500
for travel expenses, $500 for printing,
and $1,000 for conference room rentals. Using Project’s budget resource
feature, you can define your budget
for different categories
of items. You can then group your resources to
com-pare your budgeted
costs to your planned costs. This way, you
can view your travel budget
of $2,500 side by side with your planned
costs of, say, $3,700,
and immedi- ately see that your next
goal is to find a way to trim those travel
costs.Hi,
You have to differenciate the proejct budget from the project cost:
The project budget is the amount of money which has been allocated to your project by the executive board based on the estimation you provided. This is not meant to be changed unless you go through a change request process, justifying why you need to change
(increase) the budget, meaning asking more money. Consequently it will not be related in MS Project with the tasks, assignments. It is entered on the project summary and can be meanly used in portfolio reports where you can consolidate yours budgets (you can
have several different budgets) among a set of projects.
The project cost is something which lives, changes along the project lifecycle. It is meant to be updated on a weekly or biweekly basis from the team members tasks updates approved by the project manager. Then the PM updates the remaining work thus the project
cost.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |
You say that the budget cost is total money which committee gave you for the project.
But the book refer budget cost for every resource. I don't understand that.
" In planning your departmental retreat, suppose you
have specific budget targets
for certain cost categories, $2,500
for travel expenses, $500 for printing,
and $1,000 for conference room rentals. Using Project’s budget resource
feature, you can define your budget
for different categories
of items. You can then group your resources to
com-pare your budgeted
costs to your planned costs. This way, you
can view your travel budget
of $2,500 side by side with your planned
costs of, say, $3,700,
and immedi- ately see that your next
goal is to find a way to trim those travel
costs. "
For example here travel budget cost is 2500 whereas planned cost is 3700. Planned cost of travel expense is created by the project manager. Who does define travel budget cost?
Let's say an employee's cost is 20 dollars per hour and I write it on the project. So how much is this employee's budget cost, Who does define it, From whom do I learn that data? -
What is the difference between sy-uline and uline in sapscripts ?
hi guys,
what is the difference bt sy-uline and uline in sap scripts ?
this is an interview question ?
also how can we draw a line without using above ?Hi ,
sy-uline is a system field.
No-difference. Except that uline is used outside
the Write Statement
TO draw a line.
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
OR
Draw a horizontal line by setting the HEIGHT in a BOX command to 0. Draw a vertical line by setting WIDTH to 0.
/: BOX FRAME 10 TW WIDTH 0 TW HEIGHT '10' CM
Vertical line 10 CM long
/: BOX FRAME 10 TW WIDTH '10' CM HEIGHT 0 TW
Horizontal line 10 CM long
ALSO
You can draw a line by setting the Height or Weidth to 0
and add a frame. E.g. a horizontal line:
/: SIZE HEIGHT '0' MM WIDTH '200' MM
/: BOX FRAME 10 TW XPOS '11.21' MM YPOS '14.81' MM INTENSITY 100
<i><b>Reward if helpful.</b></i>
Regards,
Pritha.
Message was edited by:
Pritha Agrawal -
What are the key requirements to write a recursive cte?
what are the key requirements to write a recursive cte?
when we will go for a recursive cte.A common table expression (CTE) can be thought of as a temporary result set that is defined within the execution scope of a single SELECT, INSERT, UPDATE, DELETE, or CREATE VIEW statement. A CTE is similar to a derived table in that it is not stored as an
object and lasts only for the duration of the query. Unlike a derived table, a CTE can be self-referencing and can be referenced multiple times in the same query.
A CTE can be used to:
Create a recursive query. For more information, see https://technet.microsoft.com/en-us/library/ms186243%28v=sql.105%29.aspx
Substitute for a view when the general use of a view is not required; that is, you do not have to store the definition in metadata.
Enable grouping by a column that is derived from a scalar subselect, or a function that is either not deterministic or has external access.
Reference the resulting table multiple times in the same statement.
Source : https://technet.microsoft.com/en-us/library/ms190766%28v=sql.105%29.aspx -
What is the significance of this setting..?
Dear All,
Can you please tell me what is the significance of the following settings in the Availability check configuration.
IMG - SD - Basic Functions - Availability check & TOR - Availability check - Availability check with ATP Logic or Against planning - Define default settings.
Here we maintain availability check rule for each Sales area. In our system for some sales areas it is maintained as C and for some B and rest blank.
Your help is solicited.
Regards,
VishiHi Vishi,
Here is the details of availability check rule in default setting from SAP F4 help....
Blank Dialog box in the case of shortages (batch/BAPI full dlv.)
A One-time delivery
B Full delivery
C Delivery proposal
D Dialog box in the case of shrtages (batch/BAPI one-time dlv)
E Dialog box in the case of shortages (batch/BAPI dlv. prpsl)
1 Delivery proposal for product selection
I guess this is self explanatory...... if you have further doubt revert back....
Thanks,
Raja
Maybe you are looking for
-
ok. Haven't had to do this since cs3. I have my images collected for each frame of the animation in Fireworks CS4 on separate layers. I am under the impressions that "States" has replace "Frames". I create a new state and make layer one visible. I du
-
Cheque issue in Automatic Payment
Hi Gurus, 1) While doing F110 I'm not able to preview check (standard format) as I've given RFFOUS_C against classical payment medium programe & F110_PRENUM_CHCK against form for the Payment medium. 2) subsequently if go to fbchn systems voids 1 ch
-
Hello, I use the following code to call web service from abap, but in the method "http_client->receive" i see "http_communication_failure = 1" . this is the code: DATA: SMS_TEXT TYPE STRING, SMS_TEXT_UTF TYPE STRING, SEND_STRIN
-
When I click on "view in itunes" in IE 10, Win 8 Pro, for an advertised app, it takes me to Apple Store but says I need to install itunes first even though it is already installed.
-
Bookmarks and history function will not function
i have tried all the ways to fix this and it has not fixed the problem. im not able to use either history or bookmarks. i do not use a security software so that was the other thing it suggested being the problem. please help