Owb process flow error handling

Hi,
I am using OWB 10gR2.
I have 2 process flows that each call a series of mappings. Then I have one "master" process flow that calls the two aforementioned proecess flows. When a mapping errors, I want my whole master process flow to abort. I put error handling in, but it doesn't seem to work. For example, if I get an error in the first process flow, I get my email notification that something is wrong. The process ends. However, the master process flow continues to go. I want it to stop. It continues to go because there wasn't an error in the first process flow. The error was handled, and the process flow ended successfully. Does anyone have any tips or tricks on how to handle this type of situation? I'm not doing anything revolutionary. I'm just new to these process flows.
Thanks,
Tim

hmm ok this sounds a bit weird to me.
I've created similar processflows with customers and never had similar problems like you describe.
Just to verify your design, here is how I would solve your master1 processflow.
_______________________END_WARNING
w w
start----PF1----------s---------------PF2------s---- END_SUCCESS
e e
\___________________\____END_WARNING
where the conditions for the transitions is indicated with w for warning, s for success and e for error.
Some poorly made ascii art there but hopefully you get the idea...:p
This also sounds like what you've done already and with extra email functionality.
Are you sure that pf2 starts after pf1? Or can it actually run in parallel with pf1 but just finishes after pf1 so it seems like it its done afterwards? The reason I ask is that I experienced that in one of my processflows with around 30+ mappings, one of the mappings that was supposed to be executed almost at the end, executed before everything else and messed everything up. It was quite the annoying little bug and took a long time for me to discover. If you have noticed on the transitions, there is a little number next to the line on the canvas, indicating in which order the operators are to be executed. In my case, two transitions had the same number and that caused one of the mappings to just start as soon as the processflow was told to start. If this is the case there is a way to set these, but I don't remember right now. Delete and recreate the transitions also do the trick I think.
Hope you figure it out!
Ragnar
edit: seems like my ascii art got a bit messed up... :(
Message was edited by:
rhaug

Similar Messages

(urgent)how to run the sqlldr script in owb process flow?

dear all:
In my oracle warehouse ,i have to load much *.dat file
into database with sqlldr in owb process flow. In owb process flow, I use the external process to run the sqlldr file with following configuration:
1:======external process==========
command : /app/ftpfile/sqlldr2.sh
parameter list:
success_threshold:0
script:
================================
2:create a file location in FILEãLOCATION node:
=============
ODS_LOCAL_LOC
=============
3: in the runtime repository i register the location
============
user name: oracle (for the sqlldr should run in oracle user)
password : oracle
host name: localhost
root path: /app/ftpfile/
============
4:configure the process flow
============
path settings
working locations:ods_local_loc
============
after deploy them success in runtime repository,
i run it ,it show me error following:
==========
SQL*Loader-704: Internal error: ulconnect: OCIServerAttach [0]
ORA-12545: Connect failed because target host or object does not exist
===========
please help me!
with best regard!

Hello,
our developers were getting this error code just the other day. They are using "sqlplus_exec_template" script to initiate these things. In our case, I had to do two thing:
1) Modify their "initiator" script (the one that connects to runtime access user, and then calls "template") - it has to use tns connectivity "user/passwd@service_name"
2) Create TNS entry (server side) for the "service_name" above.
Now these SQL*LOADER mappings run successfully.
Alex.

Start OWB Process Flow Schedule Job in Workflow Manager

I am trying to get the Oracle Workflow Schedule to execute my Oracle Warehouse Builder (OWB) Process Flow. Please note that execute Process Flow from the OWB deployment manager works fine. I did the following but nothing being executed:
Info:
OWB: 10g
Oracle DB: 10g
Oracle Workflow: 2.6.3
OracelAS: NONE
1. From the Oracle Workflow Manager browser, click the Background Engines->Submit New
2. Insert the following parameter:
Work Item Type: LD_STG
Run Date and Time: 10/18/2004 17:40:00
Run Every: 0 days, 00 hours, 01 minutes, 00 seconds
3. Click ok and system showed "Successfully submitted Background Engine with job number 107"
However, after the specificied schedule time, nothing happened. No error shown in the Work Item.
Any help are greatly appreciated. Thanks.

This is a Oracle Workflow client problem. Can you post this to the workflow forum (Workflow
Regards:
Igor

OWB Process flow restart??

OWB Process flow restart??
Set up:
OWB repository 10.2.0.2.0
OWB client 10.2.0.2.8.
Oracle version 10G (10.2.0.3.0).
I have created a process flow(PF1) that has say 5 maps and on'SUCCESS' or FAILURE sends an email.
I would like to restart the PF1 (after data fix) from the point of failure.
Did any one has any idea for such a scenario ?
Thank you!

So, if you have a process flow package with 2 processes, process1 and process2, create a third process called RunAll.
In process RunAll you will first run process1, then connect it to process2 with an transition arrow having the conditon set to Success.
You could also have 2 other transition arrows going from process1 having conditions of Error and Warning (these would go somewhere else besides process2.).
Then, you would merely run process RunAll. If process1 fails, then process2 never runs, since the transition arrows define the path of success, error, and warning.
Hope this helps!

How to check SQL activity in OWB Process flow

Hi,
In OWB process flow,I need to check SQL activity. How to check that? I am using OWB 11g R2.
Regards,
Rashmik

Gowtham,
Well the following hint is provided by oracle warehouse builder help.........
The time-out setting for the workflow engine determines how long the File Exist activity waits for a file. If the file does not arrive before the time-out setting expires, the File Exists activity terminates with errors.
well someone with deep workflow knowledge can answer this one...
If you get the answer please share with us.....
Regards,
Suraj.

Oracle 10G Database Control and Scheduling OWB Process Flow

Does anyone know how to go about scheduling an OWB Process Flow from
Oracle 10G Data Base Control. I knew how to do this with Oracle Enterprise Manager 9.2 but we recently upgraded to Oracle Db 10G and the interface has changed significantly.
Now the interface seems to require a PL/SQL stored procedure to be executed.
Is there a template procedure that is installed with 10G Data Base Control as there was for 9.2 i.e. oem_exec_template.sql?
Thanks! Deadline approaching fast...
Marion

I've used the oem_exec_template.sql successfully with OWB 10.1 and Oracle 10G Database Control, with a little trial and error at first.
I'm assuming that your job execution environment is set up correctly, ie. that you can properly execute jobs via the host agent.
1. Log on to Database Control as SYSTEM, select Jobs from the links at the bottom of the page
2. In the Results section, Create Job, select "SQL Script" and press Go
3. In the General section, enter Job Name, and as SQL Script enter e.g.:
@/u01/app/oracle/owb_oracle_home/owb/rtp/sql/oem_exec_template.sql owb_runtime WF_LOC PROCESS MY_PROCESS , ,
4. In the Databases section, add your target database
5. In the Credentials section, I select "Override Preferred Credentials" and use the agent account (oracle on my Linux system) and db user owb_access (OWB Runtime Access user)
6. Review Schedule tab and submit
Comments on step 3:
- the oem_exec_template.sql script must be installed according to the path specified in step 3, on the database host where the OWB Runtime Repository is located
- owb_runtime is the owner of my OWB Runtime Repository
- WF_LOC is the name of my Workflow Location as seen in OWB Deployment Manager
- MY_PROCESS is the name of a deployed Workflow Process
- the commas indicate that I don't supply any system or custom parameters.
- step 3 is actually a shell command line that is interpreted by eg. /bin/sh on Unix or cmd on Windows, and must obey proper quoting rules. On windows, I had to specify the empty commas as "\," (including dblquotes)
Regards, Hans Henrik

How to execute SQL scripts using OWB Process flows ?

Hi,
I have some SQL Scripts. I have to execute them using OWB Process flows.
Can i get any document or link which helps me in achieving this?
Thanks in Advance,
SriGP

Sutirtha,
Thank you very much. I really appreciate all of your responses.
I have one more question ( Sorry for flooding you with lot of questions :) )
How to capture the errors which occured inside the SQL Scripts.
My scenario is like this. I have two sql scripts Script_1.sql and Script2.sql namely. I would like to put dependency on the execution of the scripts.
If Script_1.sql executes succesfully without any errors, then EXECUTE Script_2.sql
else if Script_1.sql execution contains errors then DON'T EXECUTE Script_2.sql
As of now, i observed that the Process flow shows Success State even if there is an error in the sql script execution. Because of which i was not able to put dependency on the execution of the scripts.
I think i can do it by tweaking(changing) the code inside the SQL Scripts, like logging the errors in some log table and reading it before the next script execution.
But the restriction is, I Should not touch/change the existing SQL Scripts.
Do we have any mechanism in the ProcessFlows to identify the SQL Errors that occurred during execution of SQL Scripts ?
Please suggest any idea on this. It will be great if you can help in this.
Thanks in advance,
SriGP.

OWB process flow & Oracle Workflow

Hi,
In order to deploy the OWB process flow packages, is it necessary to have Oracle workflow installed on the Target server? When I tried to deploy a process flow package to the target database (10gR2 db), it required a user called owf_mgr. As far I know, owf_mgr is the admin user for workflow. Can this feature work without OWF being installed?
Thanks for your help
regards

You also might be interested in this thread...
OWB and Work Flow (being dessuported)
Just in case you are starting an implementation.

Step by Step documents for Process Chain Error Handling with Screen Shots

Hi
Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] . I will reward points to u immediately.
bye
Aamira Khan

Hi,
You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
Regards.

Execute Shell Script from OWB Process Flow

I am trying to execute a Shell Script from a User Defined activity of OWB Process Flow. As I have not done such things earlier
I need to know:
1. Where I will put the Shell Script (move_file.sh)?
2. What are the values in need to enter in the external process parameters (such as Command, Script, Result Code, Parameter List, Sucess Threshold etc)
Please reply this thread. It would be a big help for me and probably for others as well.
Kind Regards
Zakir
Message was edited by:
Zakir

Check this out,.
http://download-uk.oracle.com/docs/cd/B31080_01/doc/owb.102/b28223/ref_processflows.htm#i1173362
And answer to your question1, the shell script should be on the unix server.
Regards

How to stop OWB Process Flow job

I have a problem.
For scheduling OWB Process Flows I use EM (create Job - SQL Script) in which I schedule jobs with script @/home/oracle/scripts/oem_exec_template.sql.
Sometimes it happens, that the job doesn't finish and I also can't expedite it through Workflow manager because it is not listed there. So next executions for this job doesn't fire, because it is still active (it is shown in EM as Running …..and also I can't stop it there).
I also can't find the session for this job and also in dictionary I can't find the job, I went through these views, but nowhere I can't find any of my scheduled jobs, and of course also not the ones that are still running.
DBA_SCHEDULER_JOBS
DBA_SCHEDULER_RUNNING_JOBS
DBA_SCHEDULER_JOB_RUN_DETAILS
Where in dictionary can I find my jobs?
How can I kill my running jobs?
OS: Red Hat Linux 3
DB: 10.1.0.3.0
OWB: 10.1.0.2.0
I'm quite desperate about this isue,
Thank you,
Gorazd

Gorazd,
the best way to identify problem with processflow execution - using OWB Runtime Audit Browser.
Other variant - using public OWB runtime view, for example for reporting executions of you process run this select under OWB repository owner or any OWB user:
select created_on,elapse_time,return_result from all_rt_audit_executions
where object_name='<your processflow name in uppercase>' order by created_on;
RETURN_RESULT must be equal 'OK' and ELAPSE_TIME (in seconds) greater then 0.
If this query returns rows with null RETURN_RESULT or RETURN_RESULT<>'OK' or with zero elapse_time and this cases match (by date) with EM problems then you need analyze process executions in more detail with Runtime Audit Browser.
Alternatively use select from view ALL_RT_AUDIT_EXEC_MESSAGES / ALL_RT_AUDIT_MAP_RUN_ERRORS / ALL_RT_AUDIT_PROC_RUN_ERRORS.
Oleg

How to call OWB Process Flow from APEX?

Hello.
I was wondering if there is a way that I can have a OWB process flow kick off from a button in APEX? I know you can have APEX perform PL/SQL upon being clicked, so I am wondering if there is a way that I can do the same for a process flow? We are looking to have a manual kick off for a job and we are trying to use APEX for this. Any information would be great!
Thank you

Hi,
Using SOAP ?if there is a way ... please provide some examples.
I finished my EDQ process, and now i am trying to find how to call it from APEX
My web service WSDL is
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header/>
<soap:Body>
    <dn:request xmlns:dn="http://www.datanomic.com/ws" id="?">
      <dn:record>
        <dn:ID>?</dn:ID>
      </dn:record>
    </dn:request>
</soap:Body>
</soap:Envelope>You did not state your Apex version. If you are on 4.x then see
Creating a Web Service Reference Based on a WSDL
Cheers,

OWB Process flow deployment into auto sys

Can some one tell us the steps to be followed for deploying the owb PROCESS FLOW into Auto sys.
Thanks

Hi
There was some work a few years ago, but not sure it was ever productized. You can integrate with any 3rd party scheduler (in a course manner), see the post here;
http://blogs.oracle.com/warehousebuilder/2008/11/using_3rd_party_schedulers_with_owb_1.html
Cheers
David

Passing parameters from shell script to OWB process flow

Hi all,
I am running OWB process flow (using the template script provided by oracle) and i want to pass two date parameters as shown below:
sqlplus -s $SQL_USER/$SQL_PWD@$ORACLE_SID @$HOME_DIR/src/vmc_oem_exec_script.sql OWB_OWNER VMC_POST_DW_PF_LOC_SIT PROCESS VMC_NM1_PORT_MAIN "," "P_DATE_FROM=$DATE_FROM,P_DATE_TO=$DATE_TO"
How do i catch those values in process flow and pass those to mappings in Process flow?
Do i need to create PF variables with same names or any name will do?
Thanks in advance

This document is explaining how to pass data between activities in process flow.
I am passing parameters from a shell script.
Any ideas,how to pass parameters from shell script and then initialize the process flow variables based on those values and then pass them further to mappings.
Thanks

Load .csv file data with OWb Process flow using Web

Hi,
I Have a file in my local machine( Machines on multiple user's), need to load data through Web user interface.
Let's say have a web page with multiple radio buttons respective to different sources, by clicking on each button will pass the path of .csv file to through Application, (API or Java programming interface) execute owb Process flow as a accepting file path as a input parameter to execute for loading purpose.
Should facilitate view data, Update data through web based on user requests.
Need your guidence how can i implement this with OWb 11g R2.
Assuming with Web browser functionality. Please confirm it and if yes, please throw some light how could be the steps to implement.
Thanks

Hi David,
Thanks for your reply.
Undersatnd your proposed solution.But my requirement should be as follows.
1. Currently under consideration using web page likely to be implement with Java, allowing users to load .csv file data into staging area.(Loading flat file into Data abse table)
Case 1, Assuming OWB software is not installed on user machine. I think no.
Is it possible through web page (this case Java page) to trigger java procedure/Pl/SQl procedure or integration of both to laod data into staging area.If yes, how it could effect performance of data load with 1 GB file.
Case 2, OWb client software installed on User machine, while runtime passing parameters means passing manually?
In case it is automated, how should i pass machine name & Path to owb runtime web browser.
Could you please show me guidence how should I acheive this functionality with APEX customization part?
Thanks agin for your support.
Anil

Owb process flow error handling

Similar Messages

Maybe you are looking for