P&L & Balance Sheet from BW

we have r/3 4.6 and bw 2004s
is it possible to provide the users a P&L, Balance Sheet from BW... The daily delta upload of data is not enough... we need it to be more frequently...

There is a standard query for Balance sheet and P/L.
Take a look at this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
Ravi Thothadri

Similar Messages

  • Crystal report for Balance sheet from ECC6.0 directly

    各位专家,
    现在我想用水晶报表编制资产负债表,我们公司是直接连接ECC6.0 的表的.一般 ABAP 都是FAGLFLEXT表中取值的.
    但应用水晶报表,我在循环取数方面遇到了困难,选择专家或公式都很难多次对一个字段取数.不知道大家有没有这方面的经验可以分享,或者有好的例子,让我参考一下. SAP 提供了一套模板,但是基于BW的,无法应用到 直接从SAP ECC6.0 表里面取数的.
    谢谢
    Benson

    Sunny Zhang  先谢谢你的耐心回复
    我接触CR不久,可能问题描述的不清楚,我把问题简化一下,看看你能不能帮到我
    假设我的表里有如下5条记录,科目1001和1002属于货币资金,1100属于固定资产. 另外我设了一个参数变量为"月份".当份为1时,要把1001和1002记录的1月发生额汇总为货币资金,1100的1月汇总为固定资产.当月份为2时,要把1001和1002的1月发生额汇总加上2月发生额汇总, 1100的1月汇总和2月汇总相加.3月同理.
    我现在的处理方法是,先建立运行总计字段, 分别对1月发生额,2月发生额,3月发生额进行汇总,并且在运行总计字段里面应用公式, 限制科目. 这样就要创建2*3=6个运行总计字段. 然后再创建2个公式字段分配给报表中不同位置(if  period=1 then 1月发生额;　period=2 then 1月发生额2月发生额 ; if period=3 then 1月发生额2月+3月).
    但是资产负债表有12个月的发生额,而且科目范围也有几十个,这样创建总计字段和公式字段就是很大的工作量.不知道有没有其他简便的方法.我研究CR不久,可能有些功能不了解.
    数据记录
    科目                  1月发生额   2月发生额  3月发生额
    1001                     10
    1001                                             20
    1001                                                                 10
    1002                                             30
    1100                                                                 10
    货币资金                 
    固定资产

  • Foreign Currency valuation- balance sheet preparation valuation

    Hi,
    I have a doubt in foreign currency valuation.
    When we tick Balance sheet preparation valuation ( in t-code F.05), no reverse postings are generating, eventhough i tick reverse postings. why is this happening?.
    What is happening when we use Balance sheet preparation valuation in Foreign currency valuation?
    Thanks,
    Vinay

    Vinay,
    Yes as explained earlier it converts balance sheet from one( Local) currency to Another (foreign) currency on a particular date.
    For example if your balance sheet currency is EUR and your foreign currency is USD. It will convert EUR into USD on that particular date on all open items and post it to
    the expense and revenue accounts for exchange rate differences from valuations. For payable and receivables accounts you must also define the financial statements adjustment accounts.
    This is what it happens check your own thread
    http://scn.sap.com/message/14258690#14258690
    Best regards
    Hrushikesh

  • User defined G/L Account Can't see in Balance sheet

    Hi,
    i have created one User defined G/L Account in Assets and also assign opening balance to it.
    But at a time during balance sheet view, user defined G/L Account cannot see..
    How can i see this User Defined G/L Account in balance sheet....
    Plz...View below snap....

    Hi Amitgiri,
    This is because you have not included the newly created account in Financial Report Template.
    Please Go to Financials--> Financial Report Template and select the Balance Sheet in Drop Down Menu and define new as BL in Tempalte drop down.
    Now click on the button Generate Charts of Account at the bottom of the window and then update and run the Balance sheet from Financial Reports by selecting this BL template.........
    Regards,
    Nikunj Mehta

  • PCA for Full Balance Sheet Accounting

    Dear SAP Guru,
    We're currently in 4.7. We've implemented PCA for Profit and Loss Accounting. There's business requirement to produce Full Balance Sheet Accounting in PCA, i.e. the one similar to Business Area. Can the standard PCA module (in 4.7) support Full Balance Sheet Accounting? If can, what are the settings and steps that need to be configured in the system? Thanks in advance for your assistance.

    Hello,
    you can get the full balance sheet from PCA.
    The steps are:
    1. You must make sure that you have completed financial statement version (OB58).
    2. Copy this account groups to PCA. (Please check the paths to copy the FSV to your PCA.
    3. See the available reports in KE80. One of the report must suit your requirement.
    4. If they are not suitable to your requirement, create your own balance sheet format (using form and report) - Report painter.
    Hope this helps you.
    Regards,
    Ravi

  • Change GL Account Type from Balance Sheet Account to P&L Statmt Account

    Hi Experts's
    We have mistakenly defined the GL account as type Balance Sheet Account type and Some postings are done on this GL, we need to change it to P&L Statmt Account, When we do that it's throwing message FH602, as below.
    Change balance sheet control in spite of account balance
         Message no. FH602
    Diagnosis
         You have changed the G/L account from a "balance sheet account" to a
         "P&L account" or conversely.
         The balance of the account is, however, not zero.
    Procedure
         Check your entries.
         If the G/L account was already posted in the previous year, execute the
         balance carryforward again for the current fiscal year. (program
         SAPF011).
    Please let me know the procedure to do this change, or do i have to run any report.
    Thanks

    HI
    If you are mid-year please try this:
    Balance sheet having 10000 credit balace
    try to post like this  manually
    Balance sheet account dr 10000
    to Profit and loss account 10000
    now tick the Profit and loss account and reverse the entry 
    try this in test environment first
    Thanks & Regards
    Phaneendra

  • ***Balance sheet Report book got Disappeared from HFM Explorer***

    Hi All,
    Actually one of my user is able to open the balance sheet report book from hfm workspace and run the report till last month.
    No one has removed any of his access.He is able to see all the other reports except Balance sheet report this month.As this is a month end for us it is very very important for me to provide the report book.Even i refreshed his securities but no use.
    I am really battling with my head with no result.
    Am really thankful to every one please do reply me the solution.
    Regards,
    Vinod

    Can others see this report? If so, is this the same user that is having problems with smartview?
    https://forums.oracle.com/forums/message.jspa?messageID=10912726
    Do you use groups in ADF or within HFM? has any of his groups changed in provisioning?
    Do you connect to more than one AD in Shared services? If so HFM looks for IDs in each Directory in the order they are listed. If someone entered the same user ID in another domain, HFM will use that one instead of Alex's true ID and have wrong provisioning.
    Is the balance sheet report in the list and he cannot open it? Then check to see if he has the preview POV on, perhaps the POV is defaulting to an invalid setting.
    If the balance sheet is missing from the list of reports, then check the permissions for that report.

  • To view Balance Sheets of previous period from table GLT0 in ECC 6.0 with N

    How,
    We are on ECC 6.0 , with New Ledger activated from FY:2009 .
    Now, when we run the Transaction F.01 (Program: RFBILA00) it gives us the balance sheet figures picked
    from the Table FAGLFLEXA .
    It does not show us the Balance sheet figures of Balance currently in the Classic GL table GLT0 .
    ie: f.01 to show report from 0L as well as GLT0 . (ie from Leading Ledger as well as Classic Ledger)
    Pl.suggest ow can we view B/S of entries in Classic GL table GLT0 for previous years.
    Regards,

    The balances in both tables should be the same, right?  It is just that in FAGLFLEXA you may have some extra line items due to document splitting.

  • General ledgar A/C change from Balance sheet to P&L

    Dear all
    i have one requirement, we have one GL a/c is there As a Balance sheet item it is showing in asset side in FSV,
    I want to change into p&l a/c alonge with balance in income side. then it should show in the income side
    ple give me replay ASAP
    thanks
    ravi
    Edited by: bikkina.prakash on Sep 1, 2011 1:05 PM

    Hi,
    If you don't want to create new account for this
    1. Pass an adjustment entry to make the account balance zero.
    2. Change the status from B/S to P&L
    3. Repost the entry into GL account
    Rgds
    Murali. N

  • REQUIREMENT TO STOP BALANCE SHEET ACCOUNTS FROM ACCEPTING PROJECT AT JOURNAL CREATION OR ANY FINANCIAL DOCUMENT CREATION.

    Dear Gurus,
    I have a requirement from my client to stop balance sheet account from accepting project at financial document creation or journal entry because this process distrupt the profit and loss account report or transaction report by project as balance sheet items are not expected to be part of this report.
    Kindly advise on the way to achieve this to enable fulfill requirement and deliver excellence service.
    Kind regards,

    Hi Nagarajan,
    Thank you for your response.
    My sample is whenever an entry is raised to be posted to a balance sheet account such account should not allow user to post but only in revenue and expense account. E.g. A Stock account should not allow project assignment but a cost of sales, expenses or sales revenue accounts should only accept project assignment.
    Only P&L items should allow project assignments.
    I hope this is clear is enough.
    Regards,

  • Transfer figures on balance sheet accounts from FI to PCA via 1KEK

    Hello all,
    at first sorry for my english.
    SOS! I need help.
    We make transfer dates from FI to PCA for customer/ vendor reconciliation accounts. We made 1KEK run in period 5 and everything was ok. But after the run for period 6  the calculated figures are summing up period 5 + 6.  For example in FI GL period 5 - 1000 euro, period 6 - 400 euro. Test run 1kek for period 6 shows 1400. So we have difference between FI and PCA 1000 euro. For every next period the dates are summing up from first transfered period to current period.
    May be anybody know such problem and can help me.
    BR
    Anna Grudinina

    The following balance sheet items can be transferred online in realtime:
    Material stocks
    Assets
    Work in process
    Other balance sheet items (transaction-based only)
    The system posts balance postings directly to Profit Center Accounting from online postings which directly affect the balances of assets, materials and work in process. If you have line items in Profit center Accounting, the system updates a profit center document for each reference document (e.g. MM or FI document).
    We can transfer the following balance sheet items to Profit Center Accounting in the standard SAP system at end of period:
      Payables and receivables

  • Change GL Account from P&L to Balance Sheet

    Our client has created a bank account as a P&L Account and posted transactions to it. This was unearthed only when we were helping them close their books.
    Now, we need to convert this account into a balance sheet account before closing the books. Please share the process to do this and advise necessary precautions.
    Thanks
    Anand
    Moderator: Please, search before posting

    Hi:
    If you assign new account group and to old GL accounts then the number range defined for OBD4 for new account group may conflict with the GLs defined earlier.
    To cater your requirement you have two options
    Create NEW GL in FS00 for Bank with correct Account group assignment and transfer the Open item from Old GLs to New One using F-04. This is the simple way.
    2nd option you have which probably is best suited if there are mass number of GLs involved and their account group is required to be changed. In that case you will have to create new Account group with same number range as created earlier so that existing GL (only if you want to make use of Old GL) could be assigned to them . If you don't do so you will not be able to change account group.
    Whatever the option you adopt  after changing account group you will have to remap your new GL in FSE2 you will have to changing Mapping of FS items. This will correctly map Bank GL to current asset area.
    Hope this piece of information will help you.
    Regards

  • Balance Sheet is different from Trial Balance

    Have a client that is on SQL 2005, SAP B1 8.8 PL 10  They are in an audit and when running their Balance Sheet their Purchases Clearing u2013 Allocation Account is showing a $0.01 balance.  Yet when they run the Trial Balance Report it does not show up.  Also when reviewing the journal entries for the Purchases Clearing u2013 Allocation Account there is no discrepancy there.  We have pulled a copy of their DB over to our test box with the same setup and the issue still happens.  Updated to PL 17, still the same issue.  Again the client is in an audit at this time.

    Issue was opened with SAP.  There was issue with certain Journal Entries where there is a difference of cents in the Local and the System Currency. However, the System Currency and the local Currency is same i.e. US Dollars.
    They sent a script that was run on the clients db to resolve the issue.

  • Move account from P&L to Balance Sheet

    Hi ,
    The account in Tcode FS00 was earlier as a P&L account but has been changed to Balance sheet account.
    But even now after it being changed when one makes enteries its showing as P&L and not Balance sheet .
    Can someone please help me with this.
    Thanks a ton.

    Hi,
    F.01 shows FSV hierarchy. You will have to update it via OB58 and move the G/L to the relevant group.
    Regards,
    Eli

  • Can balance sheet be derived from a segment other than balancing segment

    Hi,
    In our Chart of account following segment are there:
    1. Company Balancing Segment
    2. Branch
    3. Department Cost Centre
    4. Line of Business
    5. Account Natural Account Segment
    6. Sub Account
    The requirement is to derive Balance Sheet and P&L Company Wise, Branch Wise and Line of Business Wise.
    Can we draw balance sheet and P&L for Branch and LOB when they are not balancing segments.
    We are implementing oracle Rlease 12.1.1
    Please Reply...
    Regards
    Asif Iqbal
    Email id- [email protected]

    Hi Asif,
    You can derive the Balance sheet on other segments, but there is a high probability that your journals wont be balanced on that other segment. To generate the balance sheet, you need to have the Trial balance balanced on the segment on which you want to generate the BS.
    Thanks,
    Anil

Maybe you are looking for