P/O's were printed without being completey released

Hi
I am using ME23N and entered a PO where release indicator(EKKO-FRGKE) is not equal to '1' (Not completely released).
When I go to change mode (ME22N) and select icon message and select the output -> go to further data->select the output as print immediately (when saving the application) and save it , i am able to print the PO.
This is wrong when the system permit print the order when the PO is not approved.
Is there any solution for this? Any user exit existing for this?
Thanks in advance,
Regards
Rajani Yeluri

Please check with your workflow guys if the complete flow logic of a PO is working proper.
This issue is i guess some way related to workflow.
Regards,
Lalit Mohan Gupta.

Similar Messages

Hello. Is it possible to print to an airprint enabled printer without being connected to a PC / MAC or wifi . I want to be able to print documents and emails while on a building site.

Hello.
I was wondering if it was possible to print directly to an airprint enabled printer, without being connected to a PC/MAC/wifi spot ?
I work on a building site and quite regularly have the need to print out plans but do not know how or what deviced I need to purchase to achieve this from my iphone or ipad.
Can someone please help me.
Thank you

hiya
you might this a much better solution, a combination of the mobile printer brother rj4040 which creates its own network and the app print n share: http://goarticles.com/article/Make-Portable-Printing-Easier-With-Print-N-Share-a nd-the-Brother-RJ-4040/6721699/

How can I get an entire page or selection to print without being cut off on sites that don't offer a workaround for lame browser printing options?

As for the page itself, I guess I can use the preview, but why isn't the software smart enough to scale to fit the width in the first place? As for selections, why do I need the initial indentation that pushes everything over to where it would wrap (if the software were friendly enough to do that)? This is not a new issue. Many websites have created printer-friendly output to get around this lameness long before FF was even introduced.

Maybe an extension like one of these to remove unwanted content helps:
*Aardvark: https://addons.mozilla.org/firefox/addon/4111
*Nuke Anything Enhanced: https://addons.mozilla.org/firefox/addon/951
*Print Edit: https://addons.mozilla.org/firefox/addon/193270/

Can I use my iPad to print on my Epson printer without it being connected to a network? Was hoping to just connect to my iPad.

Can I use my iPad to print on my Epson printer without it being connected to a network? Was hoping to just connect to my iPad.

No, it has to be on a WiFi network.

Destype=Printer; without url being redirected or popup window

In our old client/server enviroment, our users printed some reports directly to the printer. In the Oracle 9I web server, we user web.show_document to run a report with '_blank' so that the form is not changed to the report URL. Destype=Printer is in the URL and printers are setup on our AIX Unix server. It works but our users do not want to see any popup window and want to stay in a form. A message comes up saying "Report ran successfully". The users don't want this message or the window that it is in caused by web.show_document. They just want to print without seeing anything on the screen. Is this possible?

Hi,
Please try with following options
1. Enter DESNAME with in quotes as '\\rgasion\F5-copyroom east -1' and print the Report
(or)
2. Go To Windows Printer Setup, Change printer name to F5-copyroom_east_-1(Remove space with underscore), then try to print
or
3. If you printer is Shared Network printer, Open Printer Property dialog and go to Sharing page, there set share name as F5-copyroom_east_-1, then try to print
Thanks
Oracle Reports Team

How to setup a canon ip2600 printer without the cd?

how to setup a canon ip2600 printer without the cd?
Solved!
Go to Solution.

Hi Santana,
The drivers for the PIXMA iP2600 can be downloaded from the Canon USA website. The following link will take you to the initial download page for your PIXMA iP2600:
PIXMA iP2600 Drivers and Software page
Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "DRIVERS" section and click the printer driver file. When you do, another page will appear giving details of the file you are about to download will appear.
3. Please scroll down on the Details page and agree to the terms of the disclaimer message to continue with the download process by clicking on the "I AGREE - BEGIN DOWNLOAD" button. After clicking the "I AGREE - BEGIN DOWNLOAD" button, follow the instructions to download and install the driver. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How can you add an image in Mail without being an attachment?

How can you add an image in Mail without being an attachment?
In otherwords I'd like to put my logo in the email not as an attachment but as an image.
Is there a simpel solution to this problem?

PBN1 wrote:
How can you add an image in Mail without being an attachment?
You don't.
It's not possible. The e-mail protocol is designed for text; anything else has to go as an attachment.
Different mail clients (such as Mail.app, the mail client bundled with Mac OS X) may have different ways of handling such attachments, but they are still attachments. Each mail client has its own rules and methods, so one may display a picture as if it were in the body of the message, but another client may do something completely different.
A way of faking it is to format your message in HTML (which is a kind of text). The image is hosted on a remote server, not added to the message; instead, you include a link to it in the body of the message, as you would when building a web page. (This is also what the two tips helpfully provided by X423424X do, except that the link to the image is added in the signature, rather than the body of the message.) What exactly happens to it is, again, at the discretion of the mail client. In my case, for instance, displaying images in HTML messages is turned off, and will stay resolutely off.

I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

The only way that would work out is if you ran exactly the versions that were made for old PowerBooks. Anything newer may require Intel and not run, or will strain the poor old G4 CPU.
Your needs have to be modest, too, because the problem with older music and video software is that they are not current as far as formats and codecs for the Web. If you want to output H.264, the current standard for YouTube/Flash video, older software may not support it, and in addition, H.264 is processor-intensive and is tailor-made for today's multi-core, 2+ GHz processors. It will overwhelm a G4. A PowerBook G4 can barely play YouTube videos.
More perspective: The PowerBooks worked great for miniDV format editing. In other words, 480i SD/standard definition video in use from the late 1990s to the late 2000s. If that is all you want to do, edit tape from an old miniDV camera to SD output, then OK.
But if you want to edit today's HD video, whether 720p from a snapshot camera/iPhone 4 or 1080p from a DSLR, the PowerBook and the software for it will either not recognize AVCHD/H.264, or it will slow the PowerBook to a dead crawl.
I'm in agreement with the above: Intel Macs have been out for so many years that getting a used one is a much better deal than a dead-end PowerBook. And I loved (still love) my PowerBooks.

"The document could not be printed" without an reason!?

Hi all,
cant Print PDF Flattening *80% then get message from reader "The document could not be printed" without an reason!
Document was an PowerPoint and the PDF was created with FreePDF 4.02 and watermarked with PDF4Net.
How can I find out what is the problem?
Thanks
Robert

The default printer is set, the page setup had a printer selected; these did not change the error result. All printers were removed using the Mac OS X printer system reset and added them back. The Adobe "Repair Acrobat Installation" was also used after adding the printers. None of these changed the error result. There is no printer spool created, just the Acrobat pop up error window with "The document could not be printed."

PDF popup, in FireFox, without being prompted

Hello, I am using Windows XP Pro, SP3, fully patched and updated. My Adobe Reader is version 9.5.0. I am currently using FireFox 3.6.25, but this problem has been affecting my computer for the last year and a half, and happens with newer versions of FireFox, up to and including version 8. I downloaded a PDF file of an air compressor users manual and saved a copy to a folder on my desktop (where I store all of my PDF files).
Now, whenever my FireFox browser is up and running, this PDF file will pop up every three hours, or so. It will initially pop up about ten minutes after the browser is started, and then about three hours after I close the reader program. It, neither the file, nor Adobe Reader, asks for permission to run, the PDF file, just comes up fully formed and running in Reader.
I have search in my Reader preferences/options/setting and can’t find any setting, control, action, button or choice that allows me to stop this pop up behavior. I can move the file to another location on my “c” drive, move it to another hard drive altogether, or even rename it, all to no avail, the popup behavior remains.
Is this a Adobe “problem”, or setting, a FireFox problem (as it only happens when the FireFox browser is running), or something else I am not aware off? Thanks for any help, in advance!!

Hello Ankit, and thanks for help:
This behavior only happens with this one PDF, no others, and I have hundreds saved to the same folder.
Speak of the devil, as I was typing the first sentence of this email, it popped up. My FireFox browser is set to start when I boot my computer, and that happened about ten minutes ago.
I rarely use IE and never use any other browser. When I do use IE it is only for those websites that still don't function properly with FireFox, and I generally get there via a FireFox add-on that opens a version of IE within the FireFox browser. Also on rare occasions, I will open IE directly to view my daughters school grades, again because that website doesn't handle FireFox properly. In any case, whenever I use IE, I only keep that tab or browser running for a very short period of time, just long enough to capture my data needs, generally less than five minutes, then shut it down,........ But, I don't recall this PDF behavior ever happening with the IE usage.
Here are the PDF's Document Properties:
Under the Description tab:
Description:
    1.. File : Tecumseh_replacement_parts-7.pdf
    2.. Title: parts book.indd
    3.. Author: (blank)
    4.. Subject: (blank)
    5.. Keywords: (blank)
    6.. Created: 4/19/2005 9:00:26 AM
    7.. Modified: 10/31/2005 8:52:35 AM
    8.. Application: Adobe InDesign CS (3.0.1)
Advanced:
    1.. PDF Producer: Adobe Library 6.0
    2.. PDF Version: 1.3 (Acrobat 4.x)
    3.. Location: C:\Documents and Settings\.....Temp\
    4.. FIle Size: 2.18 MB
    5.. Page Size: 8.50 x 11.00 in
    6.. Tagged PDF: Yes
    7.. Number of Pages: 50
    8.. Fast Web View: Yes
Under the Security tab:
Document Security
    1.. Security Method: No Security
    2.. Can be Opened by: All versions of Acrobat
Document Restrictions Summary:
(everything is allowed except Document Assembly, Commenting, Signing, and Creation of Template Page)
Under the Fonts Tab: .......
Under the Advanced tab:
PDF Settings:
    1.. Base URL: (blank)
    2.. Search Index: (blank)
    3.. Trapped: No (greyed out)
Print Dialog Presets: (all greyed out)
    1.. Page Scaling: Default
    2.. Duplex Mode: Simplex
    3.. Paper Source by Page Size: No
    4.. Print Page Range: (blank)
    5.. Number of Copies: (dropped down box)
Reading Options:
    1.. Binding: Left Edge
    2.. Language: (blank)
Tell me about, and how to do it:
If I understand your request, it means remotely accessing my computer's drives to observe the PDF's behavior, program settings and preferences, registery settings, etc. I am not comfortable doing that, as my computer has a large amount of proprietary business information and personal financial information. If there is information I can pass on to you manually, or if I can contact you when the behavior happens, that would be OK.
Thanks again for your help.
dgruber
From: Ankit_Jain
To: dgruber06
Sent: Tuesday, January 31, 2012 9:23 AM
Subject: PDF popup, in FireFox, without being prompted
        Re: PDF popup, in FireFox, without being prompted
        created by Ankit_Jain in Adobe Reader - View the full discussion

Print Without Hyperlink Character Styles

Hi,
I have applied a character style to URLs in my document that look like links so that when I export to pdf, people can click the obvious URL link. However, the document will also be printed and I do not want the text to have this character style applied to it (or be a hyperlink). I thought when I exported to PDF and unchecked 'Include Hyperlinks', no hyperlink formatting would be present in the pdf, including character styles applied to hyperlinks, but I cannot seem to print without the character style being applied.
Is there a way to choose in the print dialog whether I want the character style applied to the text? Or what is the easiest way to toggle between showing hyperlinks and not showing hyperlinks (including character styles) as I need to switch between print versions and electronic versions of my document?
Thanks so much!

Or maybe easier would be to define a second style with attributes, then use find/change to change from one to the other. Easy to go back and forth that way.

My Labels Print without spaces ?

I am printing avery labels that were produced by the "label assistant.
All good... except when I print the label items print without spaces.
Like This:
JamesHammil
123MainStreet
AlbuquerqueNM87111
Any Ideas how to fix this?

Duuuu I figured it out.
Sorry

Downloading Adobe Export PDF Again without being Charged Again!

I would like to know if I can download Adobe PDF once again onto my computer without being charged the annual fee of $ 19.95 annually since I am already a Adobe ExportPDF user from when my computer did not crash to where I had to go back to the very beginning after the crash. I lost all of my files including my Adobe Export PDF. Can I redownload Adobe Export PDf without my checking account losing the $ 19.95 annually since I have already paid for it before my computer crashed and I had to go back to the beginning to where none of my old files were saved. My adobe id is [email protected] and this is also my e-mail address.
Dean W. Ballew

Welcome to the Apple Community.
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
Currently, if your purchase happens to be your most recent purchase you will not be redirected to the report form, in this case use the report a problem option from the invoice that was emailed to you.

How can I erase my iPhone 4 without being to connect to iCloud

We recently upgraded and would like to sell our iPhone 4; we were told by an Apple store Genius Bar staff member that our antenna was going bad, and that was the reason we could not connect to WiFi, and the cloud. How can we erase our information from the phone, without being able to do this?

Just follow the instructions here -> Use iTunes to restore your iOS device to factory settings - Apple Support
Before you restore your device
Make sure you’re using the latest version of iTunes.
Use iTunes to back up your device. Transfer and sync any additional content to your computer.
Turn off Find My iPhone in Settings > iCloud on your device to disable Activation Lock

Aspire V5 Laptop won't start and I can't fix without being an administrator

I did a system restore from a recent restore point. After rebooting, my laptop started normally, but then a message came up saying "Preparing Automatic Repair." After a few moments it said "Diagnosing your PC". Then a blue screen came up saying "Automatic Repair." There were two options, "Restart" and "Advanced Options". Restart didn't work (I tried several times), so eventually I tried the Advanced Options. From Advanced Options, I went to "Troubleshoot," and then a different "Advanced options". From the Advanced Options screen, there were several choices that looked promissing; but almost all of them say I need to be an administrator and won't let me continue. To start with, I am an Administrator on my machine, but it says it can't find any Administrator accounts. How can I get past this? My computer is useless and my only options seem to be refresh or reset. Why do I have to be an administrator to save my computer? Please someone tell me there's a way to do a "System Restore," bring up the "Command Prompt," or do "Startup Repair" without being an administrator. Those are the three options that require me being an Administrator. I've never had a System Restore fail before and can't believe it did. :-(

Hi SixSigmaGuy, If you were able to do a system restore it should let you do a refresh or reset and "yes" it looks like that will be your only 2 options and at this point if you have everything back up i will go ahead and do a reset to factory default.

P/O's were printed without being completey released

Similar Messages

Maybe you are looking for