Packages unavailable from mirrors

Hi,
Until yesterday I was an Ubuntu user but today I installed Arch Linux. It went very well until I tried to install KDE. When pacman is trying to download the necessary packages for KDE, it successfully downloads all but:
* soprano-2.1.67-1-i686.pkg.tar.gz
* mysql-5.0.75-3.i686.pkg.tar.gz
* system-config-printer-1.1.1-2-i686.pkg.tar.gz
At first I only used the belnet (Belgium) mirror so I thought maybe it was due to the fact that it wasn't synchronized with the other mirrors or something like that. However, I added all the servers located in USA and Europe to /etc/pacman.d/mirrorlist and none of them has those packages. They all say something similar to
"error: failed retrieving file 'system-config-printer-1.1.1-2-i686.pkg.tar.gz' from ftp.hosteurope.de : File unavailable (e.g., file not found, no access)."
I reinstalled pacman, did about 30 times "pacman -Syy" but nonetheless he can't find the packages. What is the problem?
Hope someone can help me,
Yoran

They all seem to be on the server you linked.  You could download them individually and install them with pacman -U <pkgname>:
ftp://ftp.hosteurope.de/mirror/ftp.arch … pkg.tar.gz
ftp://ftp.hosteurope.de/mirror/ftp.arch … pkg.tar.gz
ftp://ftp.hosteurope.de/mirror/ftp.arch … pkg.tar.gz
Last edited by SkonesMickLoud (2009-02-01 18:51:02)

Similar Messages

  • Often "package not found" when updating from mirrors.

    This seems to be some defect in mirror sync mechanism, since they declare package as already synced, but in fact they don't have it.
    It occurs so often and is really annoying. I have to use main server when this happens.
    I believe this is a bug and Arch needs a better method of mirrors syncing.

    pyther wrote:
    My understanding of the packing process is that all testing packages are in a folder called testing-x86_64 or testing-i686 depending on the arch. Then when a package gets moved, it gets moved to extra-i686 or extra-x86_64.
    So then on the mirror the pkg is being deleted from testing and being uploaded to extra. This seems to kill many of the mirrors.
    Maybe a dev can shed a bit more lite on this topic.
    That is exact. For example, the latest libpng/libjeg rebuild had over several GB of packages to be upload to all the mirrors when it was pushed to extra/community.  Therefore, you have lots of packages and lots of mirrors so there's not enough rsync connections and/or bandwith to get the package to the mirrors fast enough. Plus the main server still has to serve web pages for the main web site, the forums, wiki, etc.
    We are aware of the problem and got a patch to fix this (see dev ML). Basically, the packages will go in a pool and we'll use symlinks like we're doing for the 'any' arch. Instead of moving packages around, we'll be moving symlinks.  As they are much smaller, it'll be faster.

  • "VS_NEEDSNEWMETADATA" error while running a package created from C# code

    I have gone through most of the answers for similar questions here however none has resolved the issue. We have created a package using C# code which stages data from a source table to destination (ChildPackage.dtsx).
    Source Table : RowKey, Col1, Col2
    Destination Table : RowKey, Col1, Col2, RowID, RunID (RowID is an identity column in destination table and RunID is a derived column whose value is set using a variable)
    This package runs fine when we execute it directly however, we run these packages from a master package (MasterPackage.dtsx). When we are trying to run the package (ChildPackage) from a MasterPackage we get an error:
    [SSIS.Pipeline] Error: "Oledb Destination" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
    We have tried setting DelayValidation to true for the ChildPackage and even tried setting the values for "ValidateExternalMetadata" for the source and destination component as "False" for the data flow task
    of the ChildPackage.
    There is no case difference between column names in source and destination and it runs fine when we run the ChildPackage directly.
    The only additional task that the Master package performs is to generate and set a variable that is used as RunID value by the child package.
    If we hardcode the RunID in the ChildPackage and run it directly, it runs fine.
    The MasterPackage.dtsx is not created from code and has a step to run ChildPackage.dtsx. We generate the ChildPackage.dtsx from code and replace in original solution.
    Any help would be appreciated.
    Gaurav Agarwal

    Where then this RunID is consumed?
    Arthur My Blog
    The RunID is set by the MasterPackage in a parameter, this parameter is used as value of derived column in the data transformation task of the ChildPackage.
    As mentioned ChildPackage has a RunID column.
    Gaurav Agarwal

  • When I try to open live hot mail I get this message:The Windows Live Network is unavailable from this site for one of the following reasons:

    When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
    * This site may be experiencing a problem
    * The site may not be a member of the Windows Live Network
    You can:
    * You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
    However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • Packages removed from DP's with machine account

    Hi,
    We have an incident wherein the packages are removed from the DP's with machine account.
    ISSUE: Packages removed from the DP’s.
    The package was successfully copied to all the DP’s on Friday however, today early morning the packages were missing from the DP’s.
    The logs mention the details of package being removed with the “Machine account”.
    SMS Distribution Manager successfully removed package "C00007C5" from distribution point "["Display=\\DP_NAME\"]MSWNET:["SMS_SITE=820"]\\DP_NAME\".
    The only distinguishing factor i could find in the distmgr log shows the below
    STATMSG: ID=2330 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AUDEMPSSSS01 SITE=806 PID=2232 TID=3872 GMTDATE=Mon Jan 06 01:52:42.099 2014 ISTR0="C00007C5" ISTR1="["Display=\\DP_NAME\"]MSWNET:["SMS_SITE=806"]\\DP_NAME\"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="C00007C5" AID1=404 AVAL1="["Display=\\DP_NAME\"]MSWNET:["SMS_SITE=806"]\\DP_NAME\"
    SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 3872 (0x0F20)
    Updating package info for package C00007C5 SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    Package C00007C5 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    Sent package server list to parent site R08 for package C00007C5 SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    StoredPkgVersion (2) of package C00007C5. StoredPkgVersion in database is 2. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    SourceVersion (3) of package C00007C5. SourceVersion in database is 3. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AUDEMPSSSS01 SITE=806 PID=2232 TID=5128 GMTDATE=Mon Jan 06 01:52:42.114 2014 ISTR0="Update Default User Account Picture" ISTR1="C00007C5"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="C00007C5" SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    Why was this package removed from DP??
    System Security analyst at CapG

    The Status message shows this way
    "SMS Distribution Manager successfully removed package "C00007C5" from distribution point "["Display=\\DP_NAME\"]MSWNET:["SMS_SITE=820"]\\DP_NAME\"."
    And under the distmgr log,
    Updating package info for package C00007C5 SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    Package C00007C5 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    Sent package server list to parent site R08 for package C00007C5 SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    StoredPkgVersion (2) of package C00007C5. StoredPkgVersion in database is 2. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    SourceVersion (3) of package C00007C5. SourceVersion in database is 3. SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AUDEMPSSSS01 SITE=806 PID=2232 TID=5128 GMTDATE=Mon Jan 06 01:52:42.114 2014 ISTR0="Update Default User Account Picture" ISTR1="C00007C5" ISTR2="" ISTR3="" ISTR4="" ISTR5=""
    ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="C00007C5" SMS_DISTRIBUTION_MANAGER 1/6/2014 12:52:42 PM 5128 (0x1408)
    I can see the packages were removed with "Machine account"
    Why did the machine account delete the package from the DP's?
    Does the difference in DB version and Source version of the package make any difference???
    System Security analyst at CapG

  • Whenever I select voicemail, it says the number is unavailable from my service. Please help?

    Whenever I call my voicemail or 101 to check voice messages, it rings until a voice says "the number I have called is unavailable from this service" and tells me to enquire something. Ringing other numbers and texting is working fine, except voicemail and 101. Please help
    Thanks

    Voicemail is primarily a function of the cellular provider. You may want to discuss the issue with them.

  • Package Body from SQL Developer ?

    Team I am using SQL Developer Version 2.1.1.64 But I can not able to see the package body.
    Right click on the package provides an option to 'Save Package Spec and Body', but when I save it .. it only store the package spec ..
    Is it not possible to view the package body from SQL Developer ?
    Can anyone confirm ... how to get code of package body ... ?

    Hi Bipul,
    Although there might be people here using that specific tool, there is still the dedicated SQL Developer forum to ask in:
    SQL Developer
    Regards
    Peter

  • Triggering BPC Package Link from BW backend

    Has anyone figured out a way to trigger a Package Link from the BW backend? We would like to run our standard BW process chain(s) to load Master Data and Hierarchies and THEN once that is successful, trigger the BPC package link to load the data into BPC... We'd like to do the same for transactional data too.
    We were given function module UJD_RUN_PACKAGE_LINK but could not get it to actually do anything.
    No hits on Google either.... well after this message there will be one hit 
    Thanks,
    Eric

    Jonathan,
    Bingo!!
    UJD_TEST_PACKAGE_LINK calls function UJD_RUN_PACKAGE_LINK which we were trying to do. We just must have messed up some parameters.
    Anyway, UJD_TEST_PACKAGE_LINK works brilliantly!
    For those reading this in the future....
    1. Find your LINK_ID  in table UJD_LINK. The CONTENT field gives you clues as to which one.
    2. Execute UJD_TEST_PACKAGE_LINK.
    3. Find your LINK_ID in the drop down and then hit enter. It will fill in your Appset Id and Appl Id.
    4. Make sure you enter a user id to run it under (<domain>\<bpc userid>)
    5. For our purposes we don't have any manual prompts so left it blank.
    6. Save as a variant or simply just run.
    7. Enjoy
    Thanks again everyone.

  • How do I automatically backup SQL Agent jobs and SSIS packages on the mirror daily?

    I have seen this question asked before but I could not find a satisfactory answer. What is the best solution to get your SQL Agent jobs/schedules/etc. and your SSIS packages on the mirror server? Here's the details:
    Server A is the principal with 2 DBs mirrored over to server B. Everything is fine and dandy, DBs are synched and all good. In Disaster Recovery testing, we need to bring up server B, which now will serve as the principal. Server A is inaccessible. Now,
    we need all our jobs that are setup in server A to be in server B, ready to go, but disabled. We also need all our SSIS packages properly stored. Yes, we store our packages in the MSDB in server A.
    Now, I can see a few answers coming my way.
    1- Backup the MSDB to server B. When you bring server B up as principal in DR, restore the MSDB. All your jobs,schedules,steps, SSIS packages will be there. Is this possible? Can this be done on server B without rendering it incapable of serving as the principal
    for the mirrored DBs? My fear with this option is that there may be information in the MSDB itself about the mirroring state of the DBs? Or is all that in the Master DB? Have you tried this?
    2- Right click each job, script them out, re-create them on server B... No, thank you very much. :) I am looking for an AUTOMATED, DAILY backup of the jobs and SSIS packages. Not a manual process. Yes, we do change jobs and packages quite often and doing
    the job twice on two servers is not an option.
    3- Use PowerShell.. Really? Are we going back to scripting at the command prompt like that, that fast?
    Since I fear option number 3 will be the only way to go, any hints on scripts you guys have used that you like that does what I need to do?
    Any other options?
    Any help GREATLY appreciated. :-) I can be sarcastic but I am a good guy..
    Raphael
    rferreira

    I would go with option number 3. Once  you have a script simple run it....
    param([string]$serverName,[string]$outputPath) 
    function script-SQLJobs([string]$server,[string]$outputfile) 
        [reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.Smo") | Out-Null 
        $srv = New-Object Microsoft.SqlServer.Management.Smo.Server("$server") 
        $db = New-Object Microsoft.SqlServer.Management.Smo.Database 
        $scrp = New-Object Microsoft.SqlServer.Management.Smo.Scripter($srv) 
        $scrp.Options.ScriptDrops = $FALSE 
        $scrp.Options.WithDependencies = $TRUE 
        $jobs = $srv.JobServer.get_Jobs() 
        $jobs=$jobs | Where-Object {$_.Name -notlike "sys*"}     
        foreach($job in $jobs) 
            $script=$job.Script() 
            $script >> $outputfile 
            "GO" >> $outputfile 
    ---script-SQLJobs "SQLSRV12" "C:\Jobs\test.txt" 
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Blog:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance

  • Call Package Procedure from a Servlet?

    Hi,
    Is it possible to call a package procedure from a servlet?
    Art

    Could you be a bit more specific please? I'm not sure where or what to look for.
    Art
    Wrap it with WebServices interface. There is an example article somewhere on otn.oracle.com

  • How to install Cyrillic package SUNWi5rf from Installation disk?

    Hello!
    I am a new to Solaris.
    I have a spark server with Solaris 9 already installed
    with West-european locales.
    But I need for work East-european iso8859-5.
    I know that it is SUNWi5rf. I found it on installation disk 1 Solaris 9.
    Server is situated in remote room and I have an accesss to it by remote access - so I copied content of CD 1 to directory "disk1" from my Windows PC.
    Then I tryed to install package using "pkgadd":
    pkgadd -d <directory>
    but I get a message that directory doesn't contain a package.
    Please help!
    Viacheslav

    Installing the package SUNWi5rf from Solaris 8 disk 1 of 1.
    for example:
    #  pkgadd –d /cdrom/sol_8_204_sparc/s0/Solaris_8/Product SUNWi5rfYou need exact path to set.

  • Mac OS 10.5 - Package unavailable on peer

    I have AnyConnect client version v2.2 - when I connect I get the message AnyConnect package unavailable on the peer. (It does authenticate me, b/c if I enter an incorrect password I get password failure.) Once connected the message comes up and then the only option is to disconnect.
    I can connect just fine using the Windows client (v2.1)
    Thanks

    Hello, were you able to resolve this issue? I'm having the same problem on OS 10.4 with Anyconnect 2.2.
    Thanks

  • Running package programmactically from console causes error if package uses connection in Connection Manager.

    Hello my friends:
    I attempted to run a few packages programmatically using the code and solution on this page:
    http://msdn.microsoft.com/en-us/library/ms136090.aspx
    I observed that the script and process failed when I use the connection in SSIS/SSDT connection Manager in Visual Studio 2013. Meaning if I create a Connection for the Project in the Connection Manager and use it on tasks.
    However, the project and packages will run just fine if I simply add individual connection to each task where needed and do not use the Connection manager.
    If I use the Connection Manager, I get this error: This only happens when I run the package programmatically,
    if I run the package directly from Visual Studio, I get no errors.
    Error Message:
    Error in Microsoft.SqlServer.Dts.Runtime.Package/ : The connection "{0E6E938E-B0
    84-45E6-9110-0D532BD61787}" is not found. This error is thrown by Connections co
    llection when the specific connection element is not found.
    Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline : Cannot find th
    e connection manager with ID "{0E6E938E-B084-45E6-9110-0D532BD61787}" in the con
    nection manager collection due to error code 0xC0010009. That connection manager
     is needed by "SQL Server Destination.Connections[OleDbConnection]" in the conne
    ction manager collection of "SQL Server Destination". Verify that a connection m
    anager in the connection manager collection, Connections, has been created with
    that ID.
    Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline : SQL Server Des
    tination failed validation and returned error code 0xC004800B.
    Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline : One or more co
    mponent failed validation.
    Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/ : There were errors during ta
    sk validation.
    Connection Manager Screenshot:
    I am using that connection in an SQL Server Destination Task:
    And here is the code:
    class Program
    class MyEventListener : DefaultEvents
    public override bool OnError(DtsObject source, int errorCode, string subComponent,
    string description, string helpFile, int helpContext, string idofInterfaceWithError)
    Console.WriteLine("Error in {0}/{1} : {2}", source, subComponent, description);
    return false;
    static void Main(string[] args)
    string pkgLocation;
    Package pkg;
    Application app;
    DTSExecResult pkgResults;
    MyEventListener eventListener = new MyEventListener();
    pkgLocation =
    @"C:\Users\Administrator\Desktop\ExampleConnectionMgr\DataExtractionB.dtsx";
    app = new Application();
    pkg = app.LoadPackage(pkgLocation, eventListener);
    pkgResults = pkg.Execute(null, null, eventListener, null, null);
    Console.WriteLine(pkgResults.ToString());
    Console.ReadKey();
    Thank you everyone!

    I have confirmed that this problem, at least on the surface is caused by the lack of reference to the Connection in the Connection Manager as indicated by the error message.
    The solution here will require that the Connection is set directly within each task.
    If I simply set the connection in each task then the page runs just fine programmatically:
    I am also able to convert the Connection in the Connection Manager to Package Connection as shown in the screen shot below. This will override all references to the Connection Manager and make the connection local within each package or package
    task.
    Is there any other solution out there?
    Thanks again!
    Synth.
    This is exactly what I asked for in my previous post. Sorry if it wasnt clear.
    I guess the problem is in your case you're creating connection manager from VS which is not adding any reference of it to packages which is why its complaining of the missing connection reference
    Please Mark This As Answer if it solved your issue
    Please Mark This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page
    Hi my friend:
    Do you know how I can include the connection programmatically in code?
    I found this article but it is not very clear to me:
    I do not want to create a package in code, just the connection so that the program can run.
    Here is the article:
    http://msdn.microsoft.com/en-us/library/ms136093.aspx
    Thank you so much.
    Patrick

  • After setup name server from SLD name prefix is still unavailable from nwds

    Hi there
    Although the nameserver is setup from the SLd, our developper team has told me that it does not work.
    One of them has showed me from nwds, and I do not know how to fix it.
    The name list is still unavailable from nwds while New Development Component creation:
    Does anyone have any idea ?
    Thanks,

    Hi,
    yes, there you should see the nameserver.
    Proceed this way: Go to CMS webui -- Landscape Configurator -- Track Data -- select the track in question from the left hand side table -- RE-SAVE the track (Change and Save).
    This action will update the server side development configuration.
    Once the track is resaved, doublecheck the changes in the devconfig XML you can access on the Track Data -- tab Build Variants -- Display Development Configuration. An XML file will be opened where you should have an entry for nameserver. It'll look like
    name-server-url="http://<your host:your port>/sld/cimom"
    If it is correct, then open your NWDS and remove and re-import the development configuration.
    Or try to trigger "Update" on it as you can see in the blog I sent you, but if that does not work then remove and reimport.
    Check again the settings you have showed me recently on the screenshot, this time the "Name Server" on the Component Properties should not be empty any more.
    I hope this helps. Let me know the results.
    Thank you and Regards,
    Ervin

  • How to list packages installed from /home/packages ?

    Is there a way to see the list of packages installed from local repo ? I mean those packages made by myself using ABS & makepkg stored in /home/packages.

    If they are not in any official repository, they are listed by pacman -Qm.

Maybe you are looking for