Packing issue in vl02n

Hi I did maintain packing instruction via pop1,but when I am packing in vl02n,the system popped up a error message and says no packing instruction could be found for material 541,how to fix?

hi :
Please see my issue description as below:
1 I created a outbound delivery for selling material 541,then I finished picking in this outbound delivery,and I created a packing instruction first in components tab,first line I input item 10,531(package material)item category P  target quantity is 1,unit of measurement is EA,second line I input M as item category,541 as component,target quantity is 1,unit of measurement is KG.So packing instruction was created as 11.
2 Then I go to transaction pof1 and chose determination type RCPT,then pick material as key combination,chose material 541 as material column and 11 as packing instruction ,then save.
3 Then I went back to vl02n to that outbound delivery,then I click packing button,enter packaging material number 531 in pack material tab,then handling unit was generated successfully,then I am trying to click automatically packing,system popped up a log says no packing instruction could be found for material 541 even though I had created it as 11 before.
Any solution?

Similar Messages

  • Dump 'DYNPRO_MSG_IN_HELP' when '1 BOX PACK' clicked on VL02N, ECC 6 Upgrade

    Hi
    I am getting a short dump "'DYNPRO_MSG_IN_HELP' "when i click '1 box pack' button in VL02N transaction during our upgrade system from 4.6C to ECC 6.0. When i go through the old SAP note - 401823, it says to add entries in VFBS transaction for all T185 entries for this kind of dumps. But i am missing entries for SAPMV50A, I0 and ZVPK combination at support pack level '14'(SAP_APPL) in our system.
    Could anyone let me know the entries to be maintained for all the T185* tables mentioned in VFBS transaction.
    (or) is there any OSS note already created for this issue? please let me know all the details.
    Thank you,
    Anil

    Hi Laxmi,
    We are already in Support pack. (SAPKH60014), and note which you given was SP - SAPKH60007, so this correction was already implemented in our system.
    Is there a note/solution specific to '1 BOX PACK' dump and T185* table entry missing?
    Let me know,
    thank you,
    Anil

  • Short dump when '1 BOX PACK' clicked on VL02N, in ECC 6 system

    Hi
    I am getting a short dump "'DYNPRO_MSG_IN_HELP' "when i click '1 box pack' button in VL02N transaction during our upgrade system from 4.6C to ECC 6.0. When i go through the old SAP note - 401823, it says to add entries in VFBS transaction for all T185 entries for this kind of dumps. But i am missing entries for SAPMV50A, I0 and ZVPK combination at support pack level '14'(SAP_APPL) in our system.
    Could anyone let me know the entries to be maintained for all the T185* tables mentioned in VFBS transaction.
    (or) is there any OSS note already created for this issue? please let me know all the details.
    Thank you,
    Anil

    Hi Laxmi,
    We are already in Support pack. (SAPKH60014), and note which you given was SP - SAPKH60007, so this correction was already implemented in our system.
    Is there a note/solution specific to '1 BOX PACK' dump and T185* table entry missing?
    Let me know,
    thank you,
    Anil

  • Changing the field content of 'wrbtr' in accounting document during Post Goods Issue in VL02N

    Hi Experts,
         I have requirement ,where I need to  change the 'amount in document currency value (wrbtr)' in line item of a accounting document, which is created as part Post Goods issue through VL02N.
              I have already check BADI's below as follows:-.
    1) LE_SHP_GOODSMOVEMENT- No accounting document information flows in this BADI.
    2) AC_DOCUMENT - Field 'WRBTR' is not available in substitutable fields list.
    3) BTE-1050 - This BTE is not getting triggered while doing PGI.
            Please suggest any other possibilities to make the change.
    Thanks & Regards,
    Suganth.

    Hi Kartik,
                I have checked the enhancement you specified, but it didn't trigger during PGI. Can u please let me know is there any other possibilities to make the change.
    Thanks
    Suganth.

  • VL02N : when I do Post Goods Issue in VL02N, I want to change amount.

    hello, everyone.
    I have a problem. I need your help.
    To explain, when I tranfer a material from A plant to B plant,
    first, I create Stock tranfer order( ME21N ).
    And I create Delivery document ( VL10B ) with po number.
    And I click "Post Goods Issue" in VL02N.
    Just at that moment, I want to change the line item amount in the local currency.
    because, the line item amount in the local currency is calculated as the move average price of the A plant.
    I want to calculate as the move average price of the B plant.
    I looked arount too much, but I couldn't find how to change.
    You can help me. I hope so. Anything is good.
    Please, let me know in detail.
    Thanks for reading.
    Edited by: Hyun-Sun Choi on Feb 15, 2012 5:44 AM

    Thank you for your answer.
    This is the return process.
    Just I want to input value in amount in LC.
    and I fount badi in LE module.
    Again thank you.

  • Table to find posted goods issue of vl02n

    Hi all,
    After perform the post good issue on vl02n, SAP suppose to update the posted goods issue into a table. So may i know which table to find the posted goods issue record ?
    Regards,
    Marcus

    Hi,
    VBUK is the header tables, you need to refer to VBUP for the item details.
    Table VBFA contains the document flow, where fields VBELV contains the previous document no. & VBELN contains the subsequent document.
    So for your need, you can refer to VBUP, VBELN would be the outbound document number, also the movement type would be 601.
    Revert if you face any issues.
    Regards,
    Vivek

  • JEE WebSphere Management Pack: Issue with 8.5.5 Discovery

    Is WebSphere Application Server 8.5.5 supported as a discoverable JEE Application Server within System Center Operations Manager 2012 R2? We have tried just about everything at this point....
    Currently Running JEE IBM WebSphere 8 Application Server MP version 7.3.2135.0
    Agent Running as Proxy
    RunAs account created and bound to server
    BeanSpy deployed and functioning via query.
    Universal Discovery used with no success. (NewJ2EEAppServer.ps1 does not except version 8 of WebSphere).
    Any help would be appreciated

    Hi Deem13,
    Please look at these posts:
    http://blogs.technet.com/b/random_happy_dev_thoughts/archive/2012/05/21/manually-discovering-jee-application-servers-with-scom-2012.aspx
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/d15bc060-a071-4063-bf5d-c4ec9f0d8cbb/jee-websphere-management-pack-issue-with-discovery?forum=operationsmanagermgmtpacks
    http://blogs.inframon.com/post/2012/04/27/WebSphere-monitoring-with-the-JEE-Application-Performance-Monitoring-management-packs.aspx
    Natalya

  • Goods picking and Post goods issue in VL02N

    Dear All,
    Am hving problem in Picking goods and Post goods issue.
    This is for the Stock Transport Order with Delivery via Shipping
    Supplying plant is 1000(SAP std,sloc 0001) and Receiving plant 1100(sloc 0001).
    Sales org:1000
    Distrbn Chnnl:10
    Division:00
    1.maintained matrial for both the plants.
    2.Creted STO by using DOC type as "UB" and item cat "U".
    3.And getting the Shipping data for the material in the STO.as shipping point is 1000.
    saved the Po.
    4.After that i done the GR w/o PO for the material using Mvt type 501.
    5.Then,VL10B creating Delivery doc.n this is also created.
    6.but when i do the picking and PGI in VL02N there picking field is greyed out bt i have tried to mangae that when i give the picking Qty in the picking qty field system is throwing the following error.
    <b>Item to be picked by WM (picking quantity cannot be entered)
    Message no. VL118
    Diagnosis
    For this item, picking is carried out using warehouse management transfer orders since the material is stored in a warehouse with random storage.
    System Response
    The system does not allow you to enter a picking quantity manually. The picking quantity is copied automatically into the delivery during the creation of the corresponding transfer order.</b>
    is any data missed by me while doing this process?
    pls let me know n help me in this regrds
    Thank you all

    Hi Vijay
    By changing storage location you could do b'coz the new storage location is not maintained with warehouse, hence no need to perform warehouse transactions (TO creation and confirmation) before inventory mgmt transactions (PGI).
    For trying pick up with WH, first u should have enough stocks in approppriate storage bins and u should perform pick up by creation of TO and confirmation.
    warm regards
    sairam akundi

  • Post goods Issue ,in VL02n

    Hi friends ,
    I am trying to post Goods issue from delivery order,through VL02n .I tried using BAPI_GOODSMVT_CREATE but it returns the message 'Goods Movement not possible with mvmt type 645'.
    I saw in some of the threads about this BAPI ,BAPI_OUTB_DELIVERY_CONFIRM_DEC .Can i achive the same functionality .Please suggest me which parameters should be passed into the BAPI.
    The BAPI should return me the material document number generated from VL02n ,i mean after posting the goods issue .
    Regards ,
    Hemanth Nugur .

    Hi
    "I am trying to post Goods issue from delivery order,through VL02n"
    If you want to do it inside VL02N transaction, you already a PGI button, just click on that, PGI will be done
    Regards
    MD

  • Font Pack issues

    i can't get Font Pack to install because it doesn't recognize Reader X as being installed.

    Kathy Donaho wrote:
    I have downloaded the latest Adobe Reader X version 10.1.3.
    You have downloaded Adobe Reader X; did you also install it?
    There was a similar issue recently with the Japanese font pack; see http://forums.adobe.com/thread/1012683 - I am not quite sure how it was resolved...

  • Support pack Issue

    Dears,
    I am facing one issue in applying Support package.
    I am getting error :
    Error in phase: CHECK_REQUIREMENTS
    Reason for error: QUEUE_NOT_EMPTY
    While In SPAM status is:
    No queue has been define
    SPAM status:green
    In SAINT also there is no pending Support Pack.
    Tried several times but same result.
    Deepak.

    hi deepak
    try to reset the status of spam by
    Run tcode SE37 (Functional module)
    Program SPAM_RESET_STATUS
    IV_FORCE - X
    IV_TOOL - SPAM
    IV_WITH_POPUP - X
    Execute
    retry the same
    hope this will solve
    Regards
    George

  • WLS 5.1 & Solaris 8 (Intel) Performance Pack Issue

    OS: Solaris 8 Intel
    WLS: Weblogic 5.1
    Issue: Unable to load performance pack
    Description: LD_LIBRARY_PATH is set for /apps/weblogic/lib/solaris -
    Confirmed by output of startWebLogic.sh {see below}
    Contents of /apps/weblogic/lib/solaris contains
    libmuxer.so
    # ./startWebLogic.sh
    LD_LIBRARY_PATH=/apps/weblogic/lib/solaris
    Tue Jul 10 21:04:42 EDT 2001:<I> <WebLogicServer> Read global properties
    /apps/weblogic/weblogic.properties
    Tue Jul 10 21:04:51 EDT 2001:<I> <ListenThread> Listening on port: 7001
    Tue Jul 10 21:04:51 EDT 2001:<A> <Posix Performance Pack> Could not
    initialize POSIX Performance Pack.
    Tue Jul 10 21:04:51 EDT 2001:<E> <Posix Performance Pack> Stack:
    java.lang.UnsatisfiedLinkError: no muxer in java.library.path
    Tue Jul 10 21:04:51 EDT 2001:<E> <Performance Pack> Unable to load
    performance pack, using Java I/O.
    Tue Jul 10 21:04:51 EDT 2001:<I> <SSLListenThread> Listening on port:
    7002
    Tue Jul 10 21:04:51 EDT 2001:<I> <WebLogicServer> WebLogic Server
    started
    # ls -l /apps/weblogic/lib/solaris
    total 3460
    -rwxr-xr-x 1 weblogic weblogic 409436 Jul 4 12:05 libjsafe.so
    -rwxr-xr-x 1 weblogic weblogic 22332 Jul 4 12:05 libmuxer.so
    -rwxr-xr-x 1 weblogic weblogic 146932 Jul 4 12:05 libproxy.so
    -rwxr-xr-x 1 weblogic weblogic 8632 Jul 4 12:05 libstackdump.so
    -rwxr-xr-x 1 weblogic weblogic 6820 Jul 4 12:05
    libstackdump_jdk12.so
    -rwxr-xr-x 1 weblogic weblogic 7472 Jul 4 12:05
    libweblogicunix1.so
    -rwxr-xr-x 1 weblogic weblogic 6364 Jul 4 12:05 libwlenv.so
    -rwxr-xr-x 1 weblogic weblogic 277712 Jul 4 12:05 mod_wl.so
    -rwxr-xr-x 1 weblogic weblogic 275692 Jul 4 12:05 mod_wl_ssl.so
    -rwxr-xr-x 1 weblogic weblogic 275780 Jul 4 12:05
    mod_wl_ssl_raven.so
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci734_7
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci805_7
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci805_8
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci806_8
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci815_8
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci816_8
    -rw-r--r-- 1 weblogic weblogic 47868 Jul 4 12:05 wlauth
    -rw-r--r-- 1 weblogic weblogic 218276 Jul 4 12:05 zac_solaris
    [startWebLogic.sh]
    # Set user-defined variables
    JAVA_HOME=/usr/java
    PRE_CLASSPATH=

    Michael Girdley wrote:
    The perf pack is native code. It must be ported to each platform. Since
    WLS only supports Solaris/SPARC, this port hasn't been done and that's why
    the lib doesn't work.
    Michael Girdley
    http://learnweblogic.com
    "Super-User" <[email protected]> wrote in message
    news:[email protected]...
    It's [email protected]
    Super-User wrote:
    OS: Solaris 8 Intel
    WLS: Weblogic 5.1
    Issue: Unable to load performance pack
    Description: LD_LIBRARY_PATH is set for /apps/weblogic/lib/solaris -
    Confirmed by output of startWebLogic.sh {see below}
    Contents of /apps/weblogic/lib/solaris contains
    libmuxer.so
    # ./startWebLogic.sh
    LD_LIBRARY_PATH=/apps/weblogic/lib/solaris
    Tue Jul 10 21:04:42 EDT 2001:<I> <WebLogicServer> Read global properties
    /apps/weblogic/weblogic.properties
    Tue Jul 10 21:04:51 EDT 2001:<I> <ListenThread> Listening on port: 7001
    Tue Jul 10 21:04:51 EDT 2001:<A> <Posix Performance Pack> Could not
    initialize POSIX Performance Pack.
    Tue Jul 10 21:04:51 EDT 2001:<E> <Posix Performance Pack> Stack:
    java.lang.UnsatisfiedLinkError: no muxer in java.library.path
    Tue Jul 10 21:04:51 EDT 2001:<E> <Performance Pack> Unable to load
    performance pack, using Java I/O.
    Tue Jul 10 21:04:51 EDT 2001:<I> <SSLListenThread> Listening on port:
    7002
    Tue Jul 10 21:04:51 EDT 2001:<I> <WebLogicServer> WebLogic Server
    started
    # ls -l /apps/weblogic/lib/solaris
    total 3460
    -rwxr-xr-x 1 weblogic weblogic 409436 Jul 4 12:05 libjsafe.so
    -rwxr-xr-x 1 weblogic weblogic 22332 Jul 4 12:05 libmuxer.so
    -rwxr-xr-x 1 weblogic weblogic 146932 Jul 4 12:05 libproxy.so
    -rwxr-xr-x 1 weblogic weblogic 8632 Jul 4 12:05 libstackdump.so
    -rwxr-xr-x 1 weblogic weblogic 6820 Jul 4 12:05
    libstackdump_jdk12.so
    -rwxr-xr-x 1 weblogic weblogic 7472 Jul 4 12:05
    libweblogicunix1.so
    -rwxr-xr-x 1 weblogic weblogic 6364 Jul 4 12:05 libwlenv.so
    -rwxr-xr-x 1 weblogic weblogic 277712 Jul 4 12:05 mod_wl.so
    -rwxr-xr-x 1 weblogic weblogic 275692 Jul 4 12:05 mod_wl_ssl.so
    -rwxr-xr-x 1 weblogic weblogic 275780 Jul 4 12:05
    mod_wl_ssl_raven.so
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci734_7
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci805_7
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci805_8
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci806_8
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci815_8
    drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci816_8
    -rw-r--r-- 1 weblogic weblogic 47868 Jul 4 12:05 wlauth
    -rw-r--r-- 1 weblogic weblogic 218276 Jul 4 12:05 zac_solaris
    [startWebLogic.sh]
    # Set user-defined variables
    JAVA_HOME=/usr/java
    PRE_CLASSPATH=
    Thanks, I set the NativeIO to false..... And hope that it gets ported.......

  • Posix Performance Pack Issues 5.1 sp6

    I am currently running v5.1 sp6. Java is running with native threads.
    Has anyone encountered this issue before:
    Wed Oct 25 16:50:24 EDT 2000:<E> <Posix Performance Pack> Failure in
    processSock
    ets()
    java.net.SocketException: Connection reset by peer: Connection reset by peer
    at java.net.SocketInputStream.socketRead(Native Method)
    at java.net.SocketInputStream.socketRead(Compiled Code)
    at java.net.SocketInputStream.read(Compiled Code)
    at weblogic.socket.PosixSocketMuxer.processSockets(Compiled Code)
    at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:
    23)
    at weblogic.kernel.ExecuteThread.run(Compiled Code)

    These are innocuous. Don't worry about them.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "Greg Panzer" <[email protected]> wrote in message
    news:39f75188$[email protected]..
    I am currently running v5.1 sp6. Java is running with native threads.
    Has anyone encountered this issue before:
    Wed Oct 25 16:50:24 EDT 2000:<E> <Posix Performance Pack> Failure in
    processSock
    ets()
    java.net.SocketException: Connection reset by peer: Connection reset bypeer
    at java.net.SocketInputStream.socketRead(Native Method)
    at java.net.SocketInputStream.socketRead(Compiled Code)
    at java.net.SocketInputStream.read(Compiled Code)
    at weblogic.socket.PosixSocketMuxer.processSockets(Compiled Code)
    at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:
    23)
    at weblogic.kernel.ExecuteThread.run(Compiled Code)

  • WFA and vRealize Orchestration Workflow Sample Pack issue

    I download link WFA and vRealize Orchestration Workflow Sample Pack: http://www.mccloudoncloud.com/2015/06/02/netapp-oncommand-workflow-automation-and-vmware-vrealize-orchestration-workflow-sample-pack/  In vRO Run WFA workflow results error message:typeError: Cannot find function generateNetAppWFA_Inputs in object Module:com.netapp.oncommand.wfa.
    (Workflow: Setup a Basic Clustered Data ONTAP NFS Volume / generateNetAppWFA_Inputs (item2)#1) In my environment can't see generateNetAppWFA_Inputs Action ,just see generateNetAppWFA_UserInputXML My Environment Import WFA package to vRO list:
    com.netapp.oncommand.wfa.core.v3.package
    com.netapp.oncommand.wfa.workflows.pack.v1.package
    My Environment Version List:
    NetApp clustered Data ONTAP 8.3
    NetApp OnCommand Unified Manager 6.2
    NetApp OnCommand Workflow Automation 3.0
    VMware vRealize Orchestration (vRO) 5.5.1
    NetApp OnCommand Workflow Automation Package for vRealize Orchestration 3.0
    VMware vRealize Automation™ (vRA) 6.2
    VMware vSphere 5.5  Thanks!

    Hello samwu, This is an issue that we are aware of.  A new package has been created, and we are currently in the process of getting it posted to a new location.  In the short term, please feel free to reach out to me privately using the community messaging system and I will be happy to send you the updated package. Thank you, and apologies for the missing action. Andrew

  • JEE WebSphere Management Pack: Issue with 8.5.5 AutoDiscovery fail

    Hi,
    I have installed my SCOM 2012, imported JEE management pack. and we have many websphere in place. all server has configured agent running as proxy.
    The websphere application server currently running version 8.5.5 but I am surprise that none of the server were autodiscovered.
    We are not prepared to go deep discovery using mbeans as apps team after of performance issue and we are just pursue basic monitoring.
    May I know why none of the server were autodiscovered and what need to do or check to ensure all webpshere server auto discovered. 
    MT | MCITP ----- Please vote helpful or mark as answer if it's answered your question, this help us follow up the question status.

    Manually Discovering JEE Application Servers with SCOM 2012
    http://blogs.technet.com/b/random_happy_dev_thoughts/archive/2012/05/21/manually-discovering-jee-application-servers-with-scom-2012.aspx
    For Java EE Monitoring, you can check below link
    http://systemcentercore.com/?GetCategory=Java+EE+Monitoring
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

Maybe you are looking for