Pacman upgrade - file conflict on lorcon

On last upgrade, pacman stopped because of a file conflict:
lorcon: /usr/share/man/man3/lorcon.3.gz exists in filesystem
What I did:
# pacman -R lorcon-old-svn pylorcon aircrack-ng-scripts
# pacman -S lorcon python2-pylorcon aircrack-ng-scripts
Then everything worked out properly.
I guess theese packages were renamed, but pacman did not ask me "Do you want to replace lorcon-old-svn with lorcon?", unlike other times.
Don't know if this was the expected behavior, anyway I'm posting in case someone needs.
Regards
Davide

Hello I'm facing a problem..
I just installed archlinux
i ran
# pacman -Syu command
pacman has downloaded the packages but it is not installing the packages...
it showing error msg...
error: failed to commit transaction(conflicting files)
file system: /etc/mtab exists in filesystem
initscripts: /etc/profile.d/locale.sh exists in filesystem
Errors occurred,no package were upgraded
Plz tell me what to do...
Last edited by imk (2012-02-11 18:42:41)

Similar Messages

Upgrade File Conflicts (with Pacman -Syu)

When I do a pacman -Syu, I get the following error message:
checking for file conflicts...
error: the following file conflicts were found:
ncurses: /usr/share/terminfo/s/screen-256color: exists in filesystem
ncurses: /usr/share/terminfo/s/screen-256color-bce: exists in filesystem
errors occurred, no packages were upgraded.
Hmm.. Any ideas on how to get around this error?
Rob

I just saw the answer in the News. Upgrade screen first. Then upgrade ncurses. I will give that a try.
Rob

Ruby-cairo upgrade file conflicts [solved]

I did a 'pacman -Su' and it tried to upgrade ruby-cairo but it then bombed out due to file conflicts. If I do a 'pacman -Qu ruby-cairo' it says the package does not exist, even though I'm pretty sure I installed it in the past and hence why there are file conflicts. Should I force the upgrade or are there better ways to solve this?
Here's the output from pacman -Su
Targets (5): bluez-4.79-2 libx11-1.3.5-2 pixman-0.20.0-1 ruby-cairo-1.10.0-1 ruby-pango-0.90.5-3
Total Download Size: 0.00 MB
Total Installed Size: 18.27 MB
Proceed with installation? [Y/n] y
checking package integrity...
(5/5) checking for file conflicts [#######################################################################################################] 100%
error: failed to commit transaction (conflicting files)
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/color.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/colors.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/constants.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/blur.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/circle.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/color.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/path.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/rectangle.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/context/triangle.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/paper.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/papers.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/path.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/cairo/point.rb exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/x86_64-linux/cairo.so exists in filesystem
ruby-cairo: /usr/lib/ruby/site_ruby/1.9.1/x86_64-linux/rb_cairo.h exists in filesystem
Errors occurred, no packages were upgraded.
Last edited by skip (2010-11-19 11:04:03)

farrel@ages ~ $ pacman -Qo /usr/lib/ruby/site_ruby/1.9.1/cairo.rb
/usr/lib/ruby/site_ruby/1.9.1/cairo.rb is owned by ruby-rcairo 1.8.0-2
So there's ruby-rcairo (what I have installed) and ruby-cairo which is what it's trying to install. I can probably just remove ruby-rcairo and install ruby-cairo.
Last edited by skip (2010-11-19 10:59:05)

File conflicts when upgrading pacman

My Arch system has not been upgraded in a few months as it has been out of commission. I turned it on today and decided I should do a full system upgrade. When I do so, pacman prompts me to upgrade pacman itself first, so I agree, and the upgrade errors out with the following message:
checking for file conflicts...
error: the following file conflicts were found:
pacman: /etc/pacman.d/testing: exists in filesystem
What do I do?

Move this file out of pacman way

Pacman insists on upgrading file over and over again

root@dexedrine [~] (38) % pacman -Syu
:: Synchronizing package databases...
current.db.tar.gz [####################################] 100% | 45K
extra.db.tar.gz [####################################] 100% | 96K
unstable.db.tar.gz [####################################] 100% | 1K
:: kernel-2.4.23-3: ignoring package upgrade (2.4.24-1)
:: kernel26-2.6.0-1: ignoring package upgrade (2.6.0-2)
:: Above packages will be skipped. To manually upgrade use 'pacman -S <pkg>'
Targets: file-4.07-1 gdb-6.0-1
Proceed with upgrade? [Y/n] y
:: Retrieving packages from current...
gdb-6.0-1.pkg.tar.gz [####################################] 100% | 992K
checking package integrity... done.
loading package data... done.
checking for file conflicts... done.
upgrading file... done.
upgrading gdb... done.
root@dexedrine [~] (39) % pacman -Syu
:: Synchronizing package databases...
current.db.tar.gz [####################################] 100% | 45K
extra.db.tar.gz [####################################] 100% | 96K
unstable.db.tar.gz [####################################] 100% | 1K
:: kernel-2.4.23-3: ignoring package upgrade (2.4.24-1)
:: kernel26-2.6.0-1: ignoring package upgrade (2.6.0-2)
:: Above packages will be skipped. To manually upgrade use 'pacman -S <pkg>'
Targets: file-4.07-1
Proceed with upgrade? [Y/n] y
checking package integrity... done.
loading package data... done.
checking for file conflicts... done.
upgrading file... done.
this happens over and over and over again. it wants to upgrade 'file' i tried deleting the cache, that didn't seem to help. i didn't see anything bad in the log file either. any clues?

with the help of judd i was able to fix this issue, it was an old file directory in the pacman directories.

[Solved] Dovecot upgrade failed due to file conflicts

yaourt -Syu failed this morning do to file conflicts with dovecot. Here is the output:
:: Starting full system upgrade...
warning: iscan: local (2.15.0.3-1) is newer than archlinuxfr (2.8.0-3)
resolving dependencies...
looking for inter-conflicts...
Targets (10): libcups-1.3.10-1 cups-1.3.10-1 libmysqlclient-5.1.34-1 dovecot-1.1.14-1
ffmpegthumbnailer-1.5.0-1 mysql-clients-5.1.34-1 mysql-5.1.34-1 recordproto-1.13.2-2
renderproto-0.9.3-2 subversion-1.6.1-3
Total Download Size: 51.88 MB
Total Installed Size: 148.31 MB
Proceed with installation? [Y/n]
:: Retrieving packages from extra...
libcups-1.3.10-1-x86_64 185.2K 106.8K/s 00:00:02 [#########################################################] 100%
cups-1.3.10-1-x86_64 3.0M 121.0K/s 00:00:26 [#########################################################] 100%
libmysqlclient-5.1.... 12.2M 120.9K/s 00:01:44 [#########################################################] 100%
dovecot-1.1.14-1-x86_64 3.2M 120.2K/s 00:00:28 [#########################################################] 100%
mysql-clients-5.1.3... 278.2K 122.2K/s 00:00:02 [#########################################################] 100%
mysql-5.1.34-1-x86_64 25.9M 122.4K/s 00:03:36 [#########################################################] 100%
recordproto-1.13.2-... 4.0K 226.0K/s 00:00:00 [#########################################################] 100%
renderproto-0.9.3-2... 16.7K 86.4K/s 00:00:00 [#########################################################] 100%
subversion-1.6.1-3-... 6.9M 118.3K/s 00:01:00 [#########################################################] 100%
:: Retrieving packages from community...
ffmpegthumbnailer-1... 64.9K 119.1K/s 00:00:01 [#########################################################] 100%
checking package integrity...
(10/10) checking for file conflicts [#########################################################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
dovecot: /usr/lib/dovecot/imap exists in filesystem
dovecot: /usr/lib/dovecot/pop3 exists in filesystem
Errors occurred, no packages were upgraded.
Should I remove /usr/lib/dovecot/imap and /usr/libdovecot/pop3 and continue the upgrade, or is there a problem with a package?
Jay
Last edited by jt512 (2009-04-18 17:32:31)

Abelian wrote:
http://www.archlinux.org/news/444/
yaourt -Syuf should do it
next time don't do it again.
just pacman -Sf package and then pacman -Su

[Solved] pacman 4.1 has issues with resolving file-conflicts

Today i wanted to upgrade protobuf-python which will be replaced by python2-protobuf, but pacman ignores the fact, that protobuf-python will be removed:
# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
community-testing is up to date
testing is up to date
:: Starting full system upgrade...
warning: pacman: local (4.1.0-1) is newer than core (4.0.3-7)
:: Replace protobuf-python with community/python2-protobuf? [Y/n]
resolving dependencies...
looking for inter-conflicts...
Packages (20): binutils-2.23.2-1 gcc-4.8.0-1 gcc-libs-4.8.0-1 glibc-2.17-4 libltdl-2.4.2-8 libpulse-3.0-3 libtool-2.4.2-8 libxkbcommon-0.3.0-1 linux-api-headers-3.8.4-1 protobuf-python-2.5.0-1
protobuf-python-2.5.0-1 [removal] pulseaudio-3.0-3 python2-dirspec-4.2.0-1 python2-oauthlib-0.4.0-1 python2-protobuf-2.5.0-2 python2-ubuntuone-storageprotocol-4.2.0-1
ubuntu-sso-client-4.2.0-1 ubuntuone-client-4.2.0-1 ubuntuone-client-gnome-4.2.0-1 ubuntuone-control-panel-4.2.0-1
Total Installed Size: 178.39 MiB
Net Upgrade Size: 6.89 MiB
:: Proceed with installation? [Y/n]
(19/19) checking keys in keyring [-----------------------------------------------------------------------------] 100%
(19/19) checking package integrity [-----------------------------------------------------------------------------] 100%
(19/19) loading package files [-----------------------------------------------------------------------------] 100%
(19/19) checking for file conflicts [-----------------------------------------------------------------------------] 100%
error: failed to commit transaction (conflicting files)
/usr/lib/python2.7/site-packages/google/protobuf/__init__.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/__init__.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/compiler/__init__.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/compiler/__init__.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/compiler/plugin_pb2.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/compiler/plugin_pb2.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_database.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_database.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_pb2.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_pb2.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_pool.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_pool.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/__init__.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/__init__.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/api_implementation.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/api_implementation.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/containers.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/containers.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/cpp_message.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/cpp_message.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/decoder.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/decoder.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/encoder.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/encoder.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/enum_type_wrapper.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/enum_type_wrapper.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/message_listener.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/message_listener.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/python_message.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/python_message.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/type_checkers.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/type_checkers.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/wire_format.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/wire_format.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/message.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/message.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/message_factory.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/message_factory.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/reflection.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/reflection.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/service.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/service.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/service_reflection.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/service_reflection.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/text_format.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/text_format.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7-nspkg.pth exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/PKG-INFO exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/SOURCES.txt exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/dependency_links.txt exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/namespace_packages.txt exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/requires.txt exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/top_level.txt exists in both 'python2-protobuf' and 'protobuf-python'
Errors occurred, no packages were upgraded.
Anyone with the same problem here or is it just me?
Btw: If it's a bug: Please fill a bug report, i don't want to register just for 1 bug...
Last edited by D4ve (2013-04-02 11:22:49)

drcouzelis wrote:
If you want to receive information about the progress made on the bug and contribute to getting it fixed then, yes, you need to register.
Otherwise, just use bugmenot.com.
Too late, i already registered.
drcouzelis wrote:Lastly, don't be cheeky.
Huh? In the whole discussion i wasn't once cheeky
drcouzelis wrote:
Otherwise, Allan will install a special surprise just for you in pacman.
if (strcmp(username, "D4ve") == 0) {
set_dependency_for_all_packages("akonadi");
That would be awesome. Three lines of code just for me
(Just for information: I hate gnome-shell for displaying my name in the top right corner so i switched my username to "<*)))><")

[solved] pacman 4 hangs after "checking for file conflicts"

Like others, I removed yaourt and package-query because they conflicted with pacman4... not worried about that, I'll reinstall them later.
I put the new pacman.conf in place (my old one wasn't really customized). I left SigLevel = Never.
Now, I can run pacman -Sy fine, but if I try to install anything, I it just hangs:
sudo pacman -S audacity
resolving dependencies...
looking for inter-conflicts...
Targets (1): audacity-1.3.14-2
Total Download Size: 3.21 MiB
Total Installed Size: 15.29 MiB
Net Upgrade Size: -0.00 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from extra...
audacity-1.3.14-2-x86_64 3.2 MiB 1397K/s 00:02 [###########################] 100%
(1/1) checking package integrity [###########################] 100%
(1/1) loading package files [###########################] 100%
(1/1) checking for file conflicts [###########################] 100%
I've waited up to 20 or 30 minutes and nothing happens. It's not just audacity, any package I try to install does this.
Suggestions?
Last edited by TheAmigo (2012-01-17 18:55:38)

With --debug switch it prints:
checking for file conflicts...
debug: looking for file conflicts
debug: searching for file conflicts: coreutils
debug: searching for filesystem conflicts: coreutils
debug: searching for file conflicts: ethtool
debug: searching for filesystem conflicts: ethtool
debug: searching for file conflicts: fail2ban
debug: searching for filesystem conflicts: fail2ban
debug: searching for file conflicts: gpgme
debug: searching for filesystem conflicts: gpgme
debug: searching for file conflicts: vim-runtime
debug: searching for filesystem conflicts: vim-runtime
debug: searching for file conflicts: gvim
debug: searching for filesystem conflicts: gvim
debug: searching for file conflicts: hdparm
debug: searching for filesystem conflicts: hdparm
debug: searching for file conflicts: inetutils
debug: searching for filesystem conflicts: inetutils
debug: searching for file conflicts: lib32-glibc
debug: searching for filesystem conflicts: lib32-glibc
debug: searching for file conflicts: lib32-gcc-libs
debug: searching for filesystem conflicts: lib32-gcc-libs
debug: searching for file conflicts: lib32-glib2
debug: searching for filesystem conflicts: lib32-glib2
debug: searching for file conflicts: lib32-gdk-pixbuf2
debug: searching for filesystem conflicts: lib32-gdk-pixbuf2
debug: searching for file conflicts: lib32-pango
debug: searching for filesystem conflicts: lib32-pango
debug: searching for file conflicts: lib32-gtk2
debug: searching for filesystem conflicts: lib32-gtk2
debug: searching for file conflicts: linux
debug: searching for filesystem conflicts: linux
debug: searching for file conflicts: nspluginwrapper
debug: searching for filesystem conflicts: nspluginwrapper
debug: searching for file conflicts: nvidia
debug: searching for filesystem conflicts: nvidia
debug: searching for file conflicts: qtwebkit
debug: searching for filesystem conflicts: qtwebkit
debug: searching for file conflicts: rpcbind
debug: searching for filesystem conflicts: rpcbind
debug: searching for file conflicts: unrar
debug: searching for filesystem conflicts: unrar
debug: searching for file conflicts: xscreensaver
debug: searching for filesystem conflicts: xscreensaver
checking available disk space...
debug: checking available disk space
Without the --debug switch
Proceed with installation? [Y/n]
(21/21) checking package integrity [############################] 100%
(21/21) loading package files [############################] 100%
(21/21) checking for file conflicts [############################] 100%
Note that the 'checking available disk space...' is not printed without the --debug option although it doesn't look like being 'debug output'.
I don't see much disk activity after that and the pacman process uses no CPU time and the process status goes to D in `ps` (man ps says: D: Uninterruptible sleep (usually IO)).
Last edited by drrossum (2012-01-18 21:58:28)

[solved] "pacman -Syu" hangs after "checking for file conflicts"

This is my third attempt. I let it run yesterday for 20 hours on the theory that maybe it was actually doing something. It always completes "checking for file conflicts" but never goes any further.
Does anyone have any suggestions how to get it to continue?
[ken@xxxxx ~]$ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra 1421.6 KiB 2.03M/s 00:01 [######################] 100%
community 1775.0 KiB 3.00M/s 00:01 [######################] 100%
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets (27): binutils-2.23-1 coreutils-8.20-1 cryptsetup-1.5.1-1
device-mapper-2.02.98-1 emacs-24.2-2 filesystem-2012.10-2
firefox-16.0.2-1 gcc-4.7.2-2 gcc-libs-4.7.2-2 glibc-2.16.0-5
hwids-20121022-1 imagemagick-6.8.0.3-1 libidn-1.25-1
libwbclient-3.6.9-1 linux-api-headers-3.6.3-1 lvm2-2.02.98-1
mkinitcpio-0.11.0-1 nspr-4.9.3-1 nss-3.14-1
nss-myhostname-0.3-3 smbclient-3.6.9-1 systemd-195-2
thunderbird-16.0.2-1 tzdata-2012h-1 util-linux-2.22.1-2
wget-1.14-2 xulrunner-16.0.2-1
Total Download Size: 47.80 MiB
Total Installed Size: 550.57 MiB
Net Upgrade Size: 6.43 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
libwbclient-3.6.9-1... 19.5 KiB 407K/s 00:00 [######################] 100%
smbclient-3.6.9-1-x... 7.9 MiB 2.71M/s 00:03 [######################] 100%
thunderbird-16.0.2-... 17.1 MiB 2.92M/s 00:06 [######################] 100%
xulrunner-16.0.2-1-... 22.9 MiB 2.92M/s 00:08 [######################] 100%
(27/27) checking package integrity [######################] 100%
(27/27) loading package files [######################] 100%
(27/27) checking for file conflicts [######################] 100%
Last edited by KenJackson (2012-10-30 14:25:05)

Allan wrote:Can you run with --debug?
OK. That garnered an additional piece of info. Here's the end of the long output:
debug: searching for filesystem conflicts: wget
debug: searching for file conflicts: xulrunner
debug: searching for filesystem conflicts: xulrunner
checking available disk space...
debug: checking available disk space
Disk space? I think I have enough disk space.
[ken@xxxxx ~]$ df
Filesystem Size Used Avail Use% Mounted on
rootfs 47G 11G 34G 25% /
dev 2.0G 0 2.0G 0% /dev
run 2.0G 292K 2.0G 1% /run
/dev/sda3 47G 11G 34G 25% /
shm 2.0G 140K 2.0G 1% /dev/shm
/dev/sda1 99M 21M 74M 22% /boot
/dev/sda4 72G 1.9G 66G 3% /home
Is disk space really the problem? Or is that just where it hung?

Pacman hanging on "checking for file conflicts"

I've tried running pacman -Syu on my laptop and pacman is simply hanging at the checking for file conflicts stage. I've let it sit for several minutes, but it never seems to get past that stage. The list of packages to be updated isn't long:
Targets (5): bison-2.6.2-1 chromium-21.0.1180.75-1 flex-2.5.37-1 libldap-2.4.32-1 lm_sensors-3.3.2-4
This is being done on a laptop that was only recently rebuilt with a new Arch install using the latest installation media. The install went well and previous updates have worked with no problems.

I'm glad you solved the problem but "pacman -Scc" shouldn't be necessary and makes it more difficult to recover in a variety of situations. You can always re-download old packages but having them in your cache makes it easy to roll something back and makes it possible to do this without, for example, a working network connection. I installed in November and I've never even run "pacman -Sc" let alone "pacman -Scc". (Though I have trimmed the cache to free up disk space using, I think, paccache.)

File conflict, libgl-dr: /usr/lib/libGL.so.1

I am trying to upgrade xorg but whenever I pacman -S xorg, I get the following error
error: the following file conflicts were found:
libgl-dri: /usr/lib/libGL.so.1: exists in filesystem
I was wondering if anyone new how to fix this problem.
Thanks

schultz wrote:
Yep... That was a problem fixer...
Problably more to come... :cry:
Unfortunaly I was right... new problems... Stupid Xorg7...

[Info] redland-1.0.6-1 file conflicts

Redland file conflicts with Raptor!
[root@arch-01 jada]# pacman -S redland
resolving dependencies... done.
looking for inter-conflicts... done.
Targets: redland-1.0.6-1
Total Package Size: 0.78 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
error: failed retrieving file 'redland-1.0.6-1-i686.pkg.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'redland-1.0.6-1-i686.pkg.tar.gz' from ftp.nethat.com : Not logged in
redland 795.5K 401.7K/s 00:00:02 [#####################] 100%
checking package integrity... done.
cleaning up... done.
(1/1) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
redland: /usr/bin/rapper exists in filesystem
redland: /usr/bin/raptor-config exists in filesystem
redland: /usr/include/raptor.h exists in filesystem
redland: /usr/lib/libraptor.a exists in filesystem
redland: /usr/lib/libraptor.so exists in filesystem
redland: /usr/lib/libraptor.so.1 exists in filesystem
redland: /usr/lib/libraptor.so.1.1.0 exists in filesystem
redland: /usr/lib/pkgconfig/raptor.pc exists in filesystem
redland: /usr/man/man1/rapper.1.gz exists in filesystem
redland: /usr/man/man1/raptor-config.1.gz exists in filesystem
redland: /usr/man/man3/libraptor.3.gz exists in filesystem
errors occurred, no packages were upgraded.
[root@arch-01 jada]#

Please submit a bug report.

[Solved] ABS built kernel package file conflicts

Index» Kernel & Hardware
Hello-
I am starting a new thread since my previous post was to an ancient thread (sorry, I hadn't noted the date).
I built a custom kernel using ABS, attempting to follow https://wiki.archlinux.org/index.php/Cu … n_with_ABS notes
However the notes regarding _kernelname and pkgname don't seem to match up with the formatting or idea of the PKGBUILD file provided by abs.
Instead of following the wiki, i followed the instruction provided by the PKGBUILD by commenting out the default line and uncommenting/modifying the second line.
#pkgbase=linux # Build stock -ARCH kernel
pkgbase=linux-iwlwifidebug # Build kernel with a different name
The result was a package with conflicting files:
loading packages...
resolving dependencies...
:: Proceed with installation? [Y/n]
Packages (1): linux-iwlwifidebug-3.12.1-1
Total Installed Size: 68.98 MiB
checking keyring...
checking package integrity...
loading package files...
checking for file conflicts...
error: failed to commit transaction (conflicting files)
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/extramodules exists in filesystem
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/kernel/arch/x86/crypto/ablk_helper.ko.gz exists in filesystem
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/kernel/arch/x86/crypto/aes-x86_64.ko.gz exists in filesystem
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/modules.softdep exists in filesystem
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/modules.symbols exists in filesystem
linux-iwlwifidebug: /usr/lib/modules/3.12.1-1-ARCH/modules.symbols.bin exists in filesystem
linux-iwlwifidebug: /usr/src/linux-3.12.1-1-ARCH/vmlinux exists in filesystem
Errors occurred, no packages were upgraded.
In the thread that was closed due to being too old (https://bbs.archlinux.org/viewtopic.php?pid=234004), jasonwryan noted:
"pkgbase is for split packages, you need pkgname:
_kernelname="-foo"
pkgname=linux-foo
pkgver=3.12.1
pkgrel=1
_srcname=linux-3.12
pkgdesc="The ${pkgname} kernel and modules"
" and you can see that he also changed kernelname.
Which jives with the doc https://wiki.archlinux.org/index.php/Cu … n_with_ABS, which notes
Modify pkgname and _kernelname for your custom package name, e.g.:
_kernelname="-custom" # custom suffix, eg., 3.12.1-1-custom
pkgname=linux-custom # custom package name, eg., vmlinuz-linux-custom
Looking at the logic that is provided by jasonwryan and the doc, I need pkgname and _kernelname to be different than default- however these are defined in PKGBUILD as being based on pkgbase, and it is much cleaner to update the one line that the PKGBUILD maintainer seemed to want us to update.
_kernelname=${pkgbase#linux}
pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
Note that the # symbol strips 'linux' from the front of pkgbase assigns it to _kernelname, while pkgname is a list
[dylan@zenbook linux]$ pkgbase=linux-iwlwifidebug
[dylan@zenbook linux]$ echo $pkgbase
linux-iwlwifidebug
[dylan@zenbook linux]$ _kernelname=${pkgbase#linux}
[dylan@zenbook linux]$ echo $_kernelname
-iwlwifidebug
[dylan@zenbook linux]$ pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
[dylan@zenbook linux]$ echo ${pkgname[@]}
linux-iwlwifidebug linux-iwlwifidebug-headers linux-iwlwifidebug-docs
So far so good - we have a pkgname and _kernelname which are both non default.
And to show this, I've created a package by just changing the pkgbase, which shows that it changes both the pkgname and the _kernelname:
Change of pkgbase:
[dylan@zenbook linux]$ grep pkgbase= PKGBUILD
#pkgbase=linux # Build stock -ARCH kernel
pkgbase=linux-iwlwifidebug # Build kernel with a different name
Package Names Set
pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
for _p in ${pkgname[@]}; do
eval "package_${_p}() {
_package${_p#${pkgbase}}
done
Ouput Package Name
[dylan@zenbook linux]$ ls -l *.xz
-rw-r--r-- 1 dylan dylan 76384600 Nov 26 18:54 linux-3.12.tar.xz
-rw-r--r-- 1 dylan dylan 52329112 Nov 26 20:16 linux-iwlwifidebug-3.12.1-1-x86_64.pkg.tar.xz
-rw-r--r-- 1 dylan dylan 4378564 Nov 26 20:17 linux-iwlwifidebug-docs-3.12.1-1-x86_64.pkg.tar.xz
-rw-r--r-- 1 dylan dylan 6139092 Nov 26 20:17 linux-iwlwifidebug-headers-3.12.1-1-x86_64.pkg.tar.xz
-rw-r--r-- 1 dylan dylan 6620 Nov 26 18:54 patch-3.12.1.xz
_kernelname sets information in package
[dylan@zenbook linux]$ grep -e provides PKGBUILD | grep _kernelname
provides=("kernel26${_kernelname}=${pkgver}")
provides=("kernel26${_kernelname}-headers=${pkgver}")
provides=("kernel26${_kernelname}-docs=${pkgver}")
Which can be seen here
[dylan@zenbook linux]$ pacman -Qpi linux-iwlwifidebug-3.12.1-1-x86_64.pkg.tar.xz | grep -i provides
Provides : kernel26-iwlwifidebug=3.12.1
So, what is going wrong?
So the root problem comes to the install path of the files, not the pkgname or the _kernelname, as I have shown above I believe.
What I found is that changing the pkgrel led to a working install, with the files installed into separate directories.
pkgrel is modified in the Makefile directly
[dylan@zenbook linux.working]$ grep pkgrel PKGBUILD
pkgrel=2
# set extraversion to pkgrel
sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
This leads to a package that can be installed, because the directory path includes the -2 rather than -1
Before changing pkgrel, i had this
[dylan@zenbook linux]$ pacman -Qpl linux-iwlwifidebug-3.12.1-1-x86_64.pkg.tar.xz | tail -2
linux-iwlwifidebug /usr/src/linux-3.12.1-1-ARCH/
linux-iwlwifidebug /usr/src/linux-3.12.1-1-ARCH/vmlinux
After changing (but keeping default name for package)
[dylan@zenbook linux.working]$ pacman -Qpl linux-3.12.1-2-x86_64.pkg.tar.xz | tail -2
linux /usr/src/linux-3.12.1-2-ARCH/
linux /usr/src/linux-3.12.1-2-ARCH/vmlinux
Where does the package directory tree get defined?
The only place pkgrel gets touched is in a re-write of the kernel makefile:
[dylan@zenbook linux.working]$ grep pkgrel PKGBUILD
pkgrel=2
# set extraversion to pkgrel
sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
Where it gets set, then tied to KERNELVERSION
[dylan@zenbook linux.working]$ grep EXTRAVERSION src/linux-3.12/Makefile
EXTRAVERSION = -2
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Which appears to only be exported for some source tree stuff
[dylan@zenbook linux.working]$ grep KERNELVERSION src/linux-3.12/Makefile
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
@echo $(KERNELVERSION)
And not at all in pkgbuild
[dylan@zenbook linux.working]$ grep KERNELVERSION PKGBUILD
[dylan@zenbook linux.working]$
What am i missing here?
Is there a bug that should be changing some headers in the Makefile to create a different directory structure for the packages, by passing in the _kernelname, pkgname, or pkgbase?
Last edited by thenextdon13 (2013-11-27 22:10:44)

pkgbuild is default from abs with only pkgbase changed;
I don't see a way to attach files, so will put entire code content here
# $Id: PKGBUILD 200210 2013-11-22 12:19:58Z tpowa $
# Maintainer: Tobias Powalowski <[email protected]>
# Maintainer: Thomas Baechler <[email protected]>
#pkgbase=linux # Build stock -ARCH kernel
pkgbase=linux-iwlwifidebug # Build kernel with a different name
_srcname=linux-3.12
pkgver=3.12.1
pkgrel=1
arch=('i686' 'x86_64')
url="http://www.kernel.org/"
license=('GPL2')
makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc')
options=('!strip')
source=("http://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
"[url]http://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.xz[/url]"
# the main kernel config files
'config' 'config.x86_64'
# standard config files for mkinitcpio ramdisk
'linux.preset'
'change-default-console-loglevel.patch'
'criu-no-expert.patch')
md5sums=('cc6ee608854e0da4b64f6c1ff8b6398c'
'5a8cb5a659baeeb6df3fe22de8d32df6'
'798bca5d2f0a1505c9b86a5227a2b339'
'8fa6cbb28dda5a4b38730c7f728e1845'
'eb14dcfd80c00852ef81ded6e826826a'
'98beb36f9b8cf16e58de2483ea9985e3'
'd50c1ac47394e9aec637002ef3392bd1')
_kernelname=${pkgbase#linux}
# module.symbols md5sums
# x86_64
# 2fd43e3edc671c61e043a5c0b3b2a1f0 /lib/modules/3.12.0-1-ARCH/modules.symbols
# i686
# e98940249665dbfa380cfdbbacf6c6b8 /lib/modules/3.12.0-1-ARCH/modules.symbols
prepare() {
cd "${srcdir}/${_srcname}"
# add upstream patch
patch -p1 -i "${srcdir}/patch-${pkgver}"
# add latest fixes from stable queue, if needed
# [url]http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git[/url]
# set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
# remove this when a Kconfig knob is made available by upstream
# (relevant patch sent upstream: [url]https://lkml.org/lkml/2011/7/26/227)[/url]
patch -Np1 -i "${srcdir}/change-default-console-loglevel.patch"
# allow criu without expert option set
# patch from fedora
patch -Np1 -i "${srcdir}/criu-no-expert.patch"
if [ "${CARCH}" = "x86_64" ]; then
cat "${srcdir}/config.x86_64" > ./.config
else
cat "${srcdir}/config" > ./.config
fi
if [ "${_kernelname}" != "" ]; then
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
fi
# set extraversion to pkgrel
sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
# don't run depmod on 'make install'. We'll do this ourselves in packaging
sed -i '2iexit 0' scripts/depmod.sh
build() {
cd "${srcdir}/${_srcname}"
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
make menuconfig # CLI menu for configuration
#make nconfig # new CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# rewrite configuration
yes "" | make config >/dev/null
# save configuration for later reuse
if [ "${CARCH}" = "x86_64" ]; then
cat .config > "${startdir}/config.x86_64.last"
else
cat .config > "${startdir}/config.last"
fi
# stop here
# this is useful to configure the kernel
#msg "Stopping build"; return 1
# build!
make ${MAKEFLAGS} LOCALVERSION= bzImage modules
_package() {
pkgdesc="The ${pkgbase/linux/Linux} kernel and modules"
[ "${pkgbase}" = "linux" ] && groups=('base')
depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7')
optdepends=('crda: to set the correct wireless channels of your country')
provides=("kernel26${_kernelname}=${pkgver}")
conflicts=("kernel26${_kernelname}")
replaces=("kernel26${_kernelname}")
backup=("etc/mkinitcpio.d/${pkgbase}.preset")
install=linux.install
cd "${srcdir}/${_srcname}"
KARCH=x86
# get kernel version
_kernver="$(make LOCALVERSION= kernelrelease)"
_basekernel=${_kernver%%-*}
_basekernel=${_basekernel%.*}
mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}"
# add vmlinux
install -D -m644 vmlinux "${pkgdir}/usr/src/linux-${_kernver}/vmlinux"
# set correct depmod command for install
cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
true && install=${install}.pkg
sed \
-e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/" \
-e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/" \
-i "${startdir}/${install}"
# install mkinitcpio preset file for kernel
install -D -m644 "${srcdir}/linux.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
sed \
-e "1s|'linux.*'|'${pkgbase}'|" \
-e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \
-e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \
-e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \
-i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
# remove build and source links
rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
# remove the firmware
rm -rf "${pkgdir}/lib/firmware"
# gzip -9 all modules to save 100MB of space
find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
# make room for external modules
ln -s "../extramodules-${_basekernel}${_kernelname:--ARCH}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
# add real version for building modules and running depmod from post_install/upgrade
mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}"
echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}/version"
# Now we call depmod...
depmod -b "$pkgdir" -F System.map "$_kernver"
# move module tree /lib -> /usr/lib
mv "$pkgdir/lib" "$pkgdir/usr"
_package-headers() {
pkgdesc="Header files and scripts for building modules for ${pkgbase/linux/Linux} kernel"
provides=("kernel26${_kernelname}-headers=${pkgver}")
conflicts=("kernel26${_kernelname}-headers")
replaces=("kernel26${_kernelname}-headers")
install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
cd "${pkgdir}/usr/lib/modules/${_kernver}"
ln -sf ../../../src/linux-${_kernver} build
cd "${srcdir}/${_srcname}"
install -D -m644 Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/Makefile"
install -D -m644 kernel/Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile"
install -D -m644 .config \
"${pkgdir}/usr/src/linux-${_kernver}/.config"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include"
for i in acpi asm-generic config crypto drm generated keys linux math-emu \
media net pcmcia scsi sound trace uapi video xen; do
cp -a include/${i} "${pkgdir}/usr/src/linux-${_kernver}/include/"
done
# copy arch includes for external modules
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/x86"
cp -a arch/x86/include "${pkgdir}/usr/src/linux-${_kernver}/arch/x86/"
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers "${pkgdir}/usr/src/linux-${_kernver}"
cp -a scripts "${pkgdir}/usr/src/linux-${_kernver}"
# fix permissions on scripts dir
chmod og-w -R "${pkgdir}/usr/src/linux-${_kernver}/scripts"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel"
cp arch/${KARCH}/Makefile "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
if [ "${CARCH}" = "i686" ]; then
cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
fi
cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel/"
# add headers for lirc package
# pci
for i in bt8xx cx88 saa7134; do
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/pci/${i}"
cp -a drivers/media/pci/${i}/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/pci/${i}"
done
# usb
for i in cpia2 em28xx pwc sn9c102; do
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/${i}"
cp -a drivers/media/usb/${i}/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/${i}"
done
# i2c
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c"
cp drivers/media/i2c/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/"
for i in cx25840; do
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/${i}"
cp -a drivers/media/i2c/${i}/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/${i}"
done
# add docbook makefile
install -D -m644 Documentation/DocBook/Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
# add dm headers
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
cp drivers/md/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
# add inotify.h
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/linux"
cp include/linux/inotify.h "${pkgdir}/usr/src/linux-${_kernver}/include/linux/"
# add wireless headers
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
cp net/mac80211/*.h "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
# add dvb headers for external modules
# in reference to:
# [url]http://bugs.archlinux.org/task/9912[/url]
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-core"
cp drivers/media/dvb-core/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-core/"
# and...
# [url]http://bugs.archlinux.org/task/11194[/url]
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
cp include/config/dvb/*.h "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
# add dvb headers for [url]http://mcentral.de/hg/~mrec/em28xx-new[/url]
# in reference to:
# [url]http://bugs.archlinux.org/task/13146[/url]
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/"
# add dvb headers
# in reference to:
# [url]http://bugs.archlinux.org/task/20402[/url]
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/dvb-usb"
cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/dvb-usb/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends"
cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/tuners"
cp drivers/media/tuners/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/tuners/"
# add xfs and shmem for aufs building
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/mm"
cp fs/xfs/xfs_sb.h "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs/xfs_sb.h"
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p "${pkgdir}"/usr/src/linux-${_kernver}/`echo ${i} | sed 's|/Kconfig.*||'`
cp ${i} "${pkgdir}/usr/src/linux-${_kernver}/${i}"
done
chown -R root.root "${pkgdir}/usr/src/linux-${_kernver}"
find "${pkgdir}/usr/src/linux-${_kernver}" -type d -exec chmod 755 {} \;
# strip scripts directory
find "${pkgdir}/usr/src/linux-${_kernver}/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
case "$(file -bi "${binary}")" in
*application/x-sharedlib*) # Libraries (.so)
/usr/bin/strip ${STRIP_SHARED} "${binary}";;
*application/x-archive*) # Libraries (.a)
/usr/bin/strip ${STRIP_STATIC} "${binary}";;
*application/x-executable*) # Binaries
/usr/bin/strip ${STRIP_BINARIES} "${binary}";;
esac
done
# remove unneeded architectures
rm -rf "${pkgdir}"/usr/src/linux-${_kernver}/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
_package-docs() {
pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase/linux/Linux} kernel"
provides=("kernel26${_kernelname}-docs=${pkgver}")
conflicts=("kernel26${_kernelname}-docs")
replaces=("kernel26${_kernelname}-docs")
cd "${srcdir}/${_srcname}"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}"
cp -al Documentation "${pkgdir}/usr/src/linux-${_kernver}"
find "${pkgdir}" -type f -exec chmod 444 {} \;
find "${pkgdir}" -type d -exec chmod 755 {} \;
# remove a file already in linux package
rm -f "${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
for _p in ${pkgname[@]}; do
eval "package_${_p}() {
_package${_p#${pkgbase}}
done
# vim:set ts=8 sts=2 sw=2 et:

[Solved] pacman upgrade fail

When I try to upgrade pacman I get the following:
gordiegii@Ion-Arch ~]$ sudo pacman -S pacman
Password:
resolving dependencies...
looking for inter-conflicts...
Targets (1): pacman-4.0.3-1
Total Installed Size: 3.54 MiB
Proceed with installation? [Y/n]
(1/1) checking package integrity [###################################################] 100%
(1/1) loading package files [###################################################] 100%
(1/1) checking for file conflicts [###################################################] 100%
error: failed to commit transaction (conflicting files)
pacman: /usr/bin/cleanupdelta exists in filesystem
pacman: /usr/bin/makepkg exists in filesystem
pacman: /usr/bin/pacman exists in filesystem
pacman: /usr/bin/pacman-db-upgrade exists in filesystem
pacman: /usr/bin/pacman-key exists in filesystem
pacman: /usr/bin/pacman-optimize exists in filesystem
pacman: /usr/bin/pacsort exists in filesystem
pacman: /usr/bin/pactree exists in filesystem
pacman: /usr/bin/pkgdelta exists in filesystem
pacman: /usr/bin/rankmirrors exists in filesystem
pacman: /usr/bin/repo-add exists in filesystem
pacman: /usr/bin/repo-elephant exists in filesystem
pacman: /usr/bin/repo-remove exists in filesystem
pacman: /usr/bin/testdb exists in filesystem
pacman: /usr/bin/testpkg exists in filesystem
pacman: /usr/bin/vercmp exists in filesystem
pacman: /usr/include/alpm.h exists in filesystem
pacman: /usr/include/alpm_list.h exists in filesystem
pacman: /usr/lib/libalpm.a exists in filesystem
pacman: /usr/lib/libalpm.so exists in filesystem
pacman: /usr/lib/libalpm.so.7 exists in filesystem
pacman: /usr/share/locale/ca/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/ca/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/ca/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/cs/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/cs/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/cs/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/da/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/da/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/da/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/de/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/de/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/de/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/el/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/el/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/el/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/en_GB/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/en_GB/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/en_GB/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/es/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/es/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/es/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/fi/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/fi/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/fi/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/fr/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/fr/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/fr/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/hu/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/hu/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/hu/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/it/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/it/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/it/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/kk/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/kk/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/kk/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/lt/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/lt/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/lt/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/nb/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/nb/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/nb/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/pl/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/pl/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/pl/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/pt/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/pt/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/pt/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/pt_BR/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/pt_BR/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/pt_BR/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/ro/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/ro/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/ro/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/ru/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/ru/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/ru/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/sk/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/sk/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/sk/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/sr/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/sr/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/sr/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/sr@latin/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/sr@latin/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/sr@latin/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/sv/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/sv/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/sv/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/tr/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/tr/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/tr/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/uk/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/uk/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/uk/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/zh_CN/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/zh_CN/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/zh_CN/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/locale/zh_TW/LC_MESSAGES/libalpm.mo exists in filesystem
pacman: /usr/share/locale/zh_TW/LC_MESSAGES/pacman-scripts.mo exists in filesystem
pacman: /usr/share/locale/zh_TW/LC_MESSAGES/pacman.mo exists in filesystem
pacman: /usr/share/man/man3/libalpm.3.gz exists in filesystem
pacman: /usr/share/man/man5/PKGBUILD.5.gz exists in filesystem
pacman: /usr/share/man/man5/makepkg.conf.5.gz exists in filesystem
pacman: /usr/share/man/man5/pacman.conf.5.gz exists in filesystem
pacman: /usr/share/man/man8/makepkg.8.gz exists in filesystem
pacman: /usr/share/man/man8/pacman-key.8.gz exists in filesystem
pacman: /usr/share/man/man8/pacman.8.gz exists in filesystem
pacman: /usr/share/man/man8/pkgdelta.8.gz exists in filesystem
pacman: /usr/share/man/man8/repo-add.8.gz exists in filesystem
pacman: /usr/share/man/man8/repo-remove.8.gz exists in filesystem
pacman: /usr/share/man/man8/vercmp.8.gz exists in filesystem
pacman: /usr/share/pacman/ChangeLog.proto exists in filesystem
pacman: /usr/share/pacman/PKGBUILD-split.proto exists in filesystem
pacman: /usr/share/pacman/PKGBUILD.proto exists in filesystem
pacman: /usr/share/pacman/proto.install exists in filesystem
pacman: /usr/share/zsh/site-functions/_pacman exists in filesystem
Errors occurred, no packages were upgraded.
[gordiegii@Ion-Arch ~]$
Has anybody seen this or have any idea how to fix it?
Should I just delete all these files?
I was getting a gcc / gcc-libs error before but reinstalling gcc as per other forum help fixed that.
Last edited by GordieGii (2012-04-29 15:29:26)

@Gcool: I did a quick search and could not find anything that matched my symptoms. The only things I found that seemed to apply were the gcc / gcc-libs issue which I resolved and merging my pacman.conf.pacnew file into pacman.conf file (only two non-comments were new and they didn't seem related).
Perhaps I can't assess the applicability of a post to my symptoms.
@karol: I did -Syu, as I always do, but this time I got this:
:: The following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n]
I tried both 'Yes' and 'no' and both failed. 'No' took much longer because it had to download a couple hundred packages (I have been trying to resolve this myself for over a week and the list keeps getting longer) before failing so I switched to just pacman.
Pacman was in the list of packages and I couldn't figure out how to exclude it to see if the others would update. Reinstalling gcc worked.
[gordiegii@Ion-Arch man]$ stat -c %s $(find /var/lib/pacman/local -name "pacman-4*")/files
0
[gordiegii@Ion-Arch man]$
Please pardon my newbieness, I came from Ubuntu when GnomeBloat became too much for my Intel ATOM and am still learning the Arch way.

[SOLVED] Pacman Upgrade Issue

Hello,
I upgraded Pacman to the latest version and I may have messed up the .pacnew files, not sure. Anyhow here's the issue I'm currently facing:
[richard@rh-laptop ~]$ su root
Password:
[root@rh-laptop richard]# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
warning: cpufrequtils: forcing upgrade to version 004-1
warning: iproute: forcing upgrade to version 2.6.25-1
warning: vlc: forcing upgrade to version 0.8.6i-3
warning: xf86-video-vesa: forcing upgrade to version 1.3.0-6
resolving dependencies...
warning: provider package was selected (giflib provides libungif)
looking for inter-conflicts...
Targets (155): a52dec-0.7.4-4 gpm-1.20.5-1 aalib-1.4rc5-5 apr-1.3.2-2
gcc-libs-4.3.1-3 pcre-7.7-2 glib2-2.16.5-1 avahi-0.6.23-1
bash-3.2.039-2 bzip2-1.0.5-3 cdparanoia-10.1-1
zlib-1.2.3.3-2 file-4.25-1 cdrkit-1.1.8-1 cpufrequtils-004-1
desktop-file-utils-0.15-1 gnome-desktop-2.22.3-1 eog-2.22.3-1
esd-0.2.39-1 gnome-keyring-2.22.3-1 gnutls-2.4.1-1
heimdal-1.2-1 libpng-1.2.29-1 libcups-1.3.8-2
randrproto-1.2.2-1 libxrandr-1.2.3-1 freetype2-2.3.7-1
fontconfig-2.6.0-2 libxft-2.1.13-1 pango-1.20.5-1
gtk2-2.12.11-3 poppler-0.8.4-1 poppler-glib-0.8.4-1
evince-2.22.2-3 libsoup-2.4.1-2
evolution-data-server-2.22.3-2 faad2-2.6.1-1
filesystem-2008.07-1 fakeroot-1.9.5-1 lame-3.98-1
x264-20080625-1 ffmpeg-20080715-3 file-roller-2.22.4-1
wxgtk-2.8.8-1 filezilla-3.1.1.1-1 hunspell-1.2.6-1
xulrunner-1.9.0.1-2 mime-types-1.0-1 firefox-3.0.1-2
flex-2.5.35-1 gail-1.22.3-1 gcalctool-5.22.3-1 gcc-4.3.1-3
ghostscript-8.63-3 libgtop-2.22.3-1 libgksu-2.0.7-1
gksu-2.0.0-3 glibmm-2.16.4-2 gnash-common-0.8.3-3
gucharmap-2.22.3-1 xorg-xkb-utils-7.3-1
xkeyboard-config-1.3-1 libxklavier-3.6-1 libgnomekbd-2.22.0-2
gnome-applets-2.22.3-1 gstreamer0.10-good-plugins-0.10.8-3
gnome-media-2.22.0-2 gnome-session-2.22.3-1
smbclient-3.0.30-2 gnome-vfs-2.22.0-4 libwnck-2.22.3-1
gnome-system-monitor-2.22.3-1 gnome-terminal-2.22.3-1
gtk-engines-2.14.3-1 gtksourceview2-2.2.2-1
libgphoto2-2.4.2-1 gvfs-0.2.5-2 hdparm-8.9-1
icon-naming-utils-0.8.7-1 imagemagick-6.4.2.7-1
initscripts-2008.08-1 iproute-2.6.25-1 jre-6u7-1
kernel-headers-2.6.25.8-1 module-init-tools-3.4-1
kernel26-2.6.26.2-1 klibc-1.5-6 klibc-extras-2.4-2
klibc-kbd-1.15.20080312-6 klibc-module-init-tools-3.4-1
klibc-udev-116-4 lib32-zlib-1.2.3.3-2 lib32-freetype2-2.3.7-1
lib32-fontconfig-2.6.0-2 lib32-gcc-libs-4.3.1-3
lib32-glib2-2.16.4-1 lib32-libpng-1.2.29-1
lib32-libcups-1.3.8-1 lib32-libxrandr-1.2.3-1
lib32-libxft-2.1.13-1 lib32-pango-1.20.5-1
lib32-gtk2-2.12.11-2 lib32-libgcrypt-1.4.1-1
lib32-e2fsprogs-1.40.8-1.1 lib32-libsm-1.1.0-1.1
lib32-libtasn1-1.4-1 lib32-pcre-7.7-2 libgnomecups-0.2.3-3
libgnomeprint-2.18.3-3 libgweather-2.22.3-1 libmpeg2-0.5.1-1
libsasl-2.1.22-7 libsm-1.1.0-1 libxfont-1.3.3-1
libxp-1.0.0-2 libxtrap-1.0.0-2 libxxf86vm-1.0.2-1
lirc-utils-0.8.3-1 madwifi-utils-0.9.4.3844-1
madwifi-0.9.4.3844-1 man-pages-3.06-1 ttf-dejavu-2.26-1
giflib-4.1.6-3 mplayer-1.0rc2-5 nautilus-2.22.5.1-1
neon-0.28.2-2 db4.5-4.5.20-1 python-2.5.2-5
openoffice-base-2.4.1-2 pam-1.0.1-2 openssh-5.0p1-2
pciutils-3.0.0-2 perl-5.10.0-4 pm-utils-1.1.2.4-1
preload-0.6.3-2 qt3-3.3.8-8 rarian-0.8.0-2 rsync-3.0.3-1
scrnsaverproto-1.1.0-2 speex-1.2rc1-1 sqlite3-3.6.1-1
swfdec-0.6.8-1 transcode-1.0.6rc1-2 tzdata-2008e-1
vi-7.1.315-1 vlc-0.8.6i-3 wget-1.11.4-1
xf86-input-mouse-1.3.0-1 xf86-video-vesa-1.3.0-6
xfsprogs-2.9.8-1 xorg-twm-1.0.4-1 xorg-xauth-1.0.3-1
xscreensaver-5.07-1 xtrans-1.2.1-1 yelp-2.23.1-2
Total Download Size: 0.00 MB
Total Installed Size: 1322.50 MB
Proceed with installation? [Y/n] y
checking package integrity...
(155/155) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
xulrunner: /usr/include/xulrunner-1.9 exists in filesystem
xulrunner: /usr/lib/xulrunner-1.9 exists in filesystem
xulrunner: /usr/lib/xulrunner-devel-1.9 exists in filesystem
xulrunner: /usr/share/idl/xulrunner-1.9 exists in filesystem
Errors occurred, no packages were upgraded.
Any ideas?
Thanks.
Last edited by RAH (2008-08-15 18:28:42)

pacman -Rd xulrunner and delete these files /usr/include/xulrunner-1.9 /usr/lib/xulrunner-1.9 /usr/lib/xulrunner-devel-1.9 /usr/share/idl/xulrunner-1.9. Re-install xulrunner and your good to go. Alternatively force the upgrade with pacman -Syuf.

Pacman upgrade - file conflict on lorcon

Similar Messages

Maybe you are looking for