Page Properties Disabled on pages sidekick

Hello.
  I'm trying to set some pages images, this way I may create a carousel. Ok, piece of cake, but when I try to edit my page properties on sidekick, the "Page properties..." option is disabled.
  The include for global.jsp is in the component jsp file, and I inserted the resourceSuperType property as well (mapping the page parent to foundation/components/page).
  What else should I do?

A template is just a special kind of component. The page properties for a page are defined by the dialog associated to the page's component. Check out for example /libs/foundation/components/page/dialog for example. If you have your template's super resource type set correctly it should inherit the dialog node, but if you get the super resource type wrong and don't provide your own dialog the page properties will be disabled.

Similar Messages

  • 508- Document Properties - Disabled ..."All of the text on this page lacks a language specification"

    Hi,
    When i try to do 508 check. I got the following error message
    "All of the text on this page lacks a language specification'
    I checked "FILE=>Document Properties". All "Document Properties" are disabled. 
    We are using Adobe LiveCycle Designer ES2 to create this dynamic for and save it as static PDF file.
    Still, we have same issue. I am not sure, how to change or setup the language in adobe livecycle designer es2.
    thank you,

    Ah, I don't know that. "Tables" is a collection, not a simple array, and some careless experimentation shows that you cannot simply use .concat to paste them together.
    I'm pretty sure I've seen a couple of workarounds for a situation like this. Perhaps it's time to read "[CS3][JS] everyItem() and getElements()" -- i.e. Marc Autret's blog posts about this, at the end of that thread.
    That is, if you stick to using everyItem()! Perhaps it's easier to build an array "the old fashioned way". This code is based on my earlier assumption you had textframes-in-textframes, but you can rewrite it to cater for groups as well:
    t = app.layoutWindows[0].activePage.textFrames.everyItem().tables;
    tableList = [];
    for (i=0; i<t.length; i++)
      tableList.push (t[i]);
    t = app.layoutWindows[0].activePage.textFrames.everyItem().textFrames.everyItem().tables;
    for (i=0; i<t.length; i++)
      tableList.push (t[i]);
    alert (tableList.length);

  • Ribbon and webpart properties disabled in publishing page Sharepoint 2013

    Hello,
    I have a problem with our sharepoint site 2013. I don't know how it came because it worked two weeks ago but when I go on a page and I select modify the page I cannot modify the webparts on the page. Before I had a little box on the top right and I could
    choose the proprites of the wqebpart but now i have only this sign to reduce or open the webpart.
    The button on the ribbon modify the webpart is disabled and it says that I have not the rights to modify it. But I am administrator...
    Do you have a solution because it really disturb us in our work. 
    Thank you so much. 
    Joëlle

    Hi,please find the below link that exactly discussion about the issue that your seeing in your environment.
    http://expertsharepoint.blogspot.de/2014/08/open-with-explorer-is-disabled-in-for.html
    Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

  • Workflow options are disabled in the sidekick for non-administrators

    We have a custom workflow for content approval. The first step in the workflow assigns the task to the workflow initiator.
    While testing the workflow, the initiation is successful and also the first task is assigned to the initiator. But when the initiator open the task and the content attached to the workflow opens in the content finder the workflow options are not available in the sidekick. It just says "
    This page is subject to workflow: 
    TxDOT Content Approval Workflow
    Under Workflow Package it says - "Unable to add to a package because of a running workflow."
    Any idea why the workflow options to complete, step back, and delegate are not available? These options are available to the author by right-clicking on the task in the Inbox. Just not available in the sidekick.

    Sham,
    This is the strange part of the issue. The content is attached to the workflow and the task is also assigned to the user. I have verified this from the worklfow instances. Yet, these options are not available in the sidekick. However, these options are available in the right-click menu in Inbox.

  • Printer Properties Disabled

    Hi All,
    I am printing one document. I have given the print immediately option. I am getting a pop up where I can select the front end printer. But in this pop up window I can not select particular no of pages to print. Cancel option is also disabled.
    Please refer to following link. I have attached the screenshot.
    [http://www.imagehousing.com/image/658779]
    Thanks in Advance.
    Edited by: Neha10985 on Feb 23, 2011 10:47 AM

    Hi Neha,
    That pop up is for front end printing. you can change this setting for the device type in SPAD.
    Secondly check your print parameters your passing to the form. Ensure you dont pass 'X' to no_dialog. This will show you a pop up to enter the printer name and other parameters.
    Just to be more precise.
    Go to SPAD >Click Display Output Devices>Select the one you are using>Click on Access Method Tab>and Uncheck no Device selection for Front end.
    And then pass the parameters for printers correctity to your smart form interface.
    Thanks
    Edited by: Sumit Naik on Feb 23, 2011 11:40 AM

  • BPC 7.5 - Member properties disabled (grey marked)

    Since the upgrade to BPC 7.5 some of the member properties are greyed (disabled).
    Is it possible to change this setting somewhere?

    Hello Martin,
    now it's clear your question. The greyed properties don't have the check on the InApp properties of the dimension, so they aren't available in the OLAP and you can't use they in MDX functions or instructions.
    If you need some of these properties on the OLAP you must go on admin console\modify dimension, check "modify dimension property" on step 2, click on step 3 and check the InApp for these properties, so they will be black.
    Kind regards
    Roberto
    Edited by: Roberto Vidotti on Jan 31, 2012 12:06 PM

  • WYSIWYG element HTML object properties disabled

    Hi,
    In WYSIWYG element HTML object properties link is getting disabled after entering value into the element. Is there any way to make it enable even after entering value.
    Thanks & Regards
    Prasad
    Server details:
    UCM 10gR3
    Site Studio 7.7
    Unix
    verity search

    Hi,
    you have to divide the process into several steps:
    get the image tag at the caret position
    read it' properties
    bring up a window with ooptions to change those properties
    remove the existing image tag
    place a new image tag with the new properties at the caret position
    alternately you can change the properties of the existing image tag.
    There a reloads of threads in this forum about how to change tag properties or the tag structure of a HTML document, so I omit this. Please try to do a search for such topics in this forum.
    A GUI (Java classes ImageDialog and ImagePreview) for entering image properties is available at http://www.calcom.de/eng/dev/index.htm
    Directly changing a table's width with the mouse is more complex, because you'd have to constantly write new width properties for the table and update the document while the mouse is moved. Probably better would be to bring up a dialog window to change the table properties instead.
    Hope this helps
    Ulrich

  • Acrobat Portfolio Properties (disable copy of text parts)

    I'm working with Acrobat Pro 9.4.0.195 (German).
    I created a Portfolio containing some PDF files (no security settings).
    Then I opened the Portfolio Properties and set items as follows:
    - compatible to Acrobat 7 and newer
    - encrypt comple content
    - no password
    - limited acces
      - printing not allowed
      - changes not allowed
    - copying NOT not allowed  !!!
    - access for visually handicapped not allowed
    However,    independent on this correct settings it is possible to mark text and to copy text out of any included PDF.
    This seem sto be a bug. Can anyone confirm this?

    Apologies for the English version:
    Open Acrobat Pro and choose menu - Advanced - Document Processing - Batch Processing.
    Press New Sequence (the top button)
    Give it a name - e.g. "Secure to prevent copying"
    Press Select Commands (top button)
    Under "Document" on the left side tree, click "Security" and press "ADD>>"
    Click the new entry on the right side to select it, then press "Edit"
    Choose a security method - e.g. "password", and set up the permissions you want to apply. Press OK. Re-enter the password and press OK.
    Press Close to save the choice for the security action.
    Press OK to save the new sequence.
    Under item 2 "Run commands on", keep "ask when sequence is run".
    Under item 3, choose where you want to save the secured files, or leave Acrobat to prompt you each time the sequence runs.
    Press "Output Options" and choose if you want to add characters to the filename, etc. to avoid confusion with the originals.
    Press OK.
    Now to run the sequence, select it from the list and press "Run Sequence" (bottom button). You'll be shown a summary of what actions will be applied, asked to select your input file(s), then the sequence will run and your secured files will be saved to the folder you chose for output.

  • Bi Publisher Action  properties disabled

    Hi  All,
    We are using obiee  11.1.1.6.2  enterprise edition.I logged in as BIAuthor  and accessing publisher reports ,on right hand side top p ortion we have action  button and we have options ,in that one option called SEND was disabled.Can anyone tell me how to enable send link.
    Thanks,
    chandra

    I have solved the Problem. I had to re-start the application server. However, I do have couple of other issues.
    First, I do not the see the "Notification" heading where I can enter an email address.
    Second, under the "Delivery" heading, I have a message No Server Available for Delivery"
    Thanks
    Kingsly

  • Cancel on OAF Page

    Hi All,
    I have a requirement for Cancel functionality.
    My Page has some mandatory fields to b e filled by the user before the form submit.
    but, when the user clicks on Exit button, then it should not promt for filling the mandatory parameters.
    On exit button(submit button) I have used OAdialog page for confirmation and performing sme validations on click of Yes/No buttons.
    Problem is, whenever the user presses Exit on the page, Page pops up to fill the required fields.
    How can we avoid this?
    Thanks & Regards
    Pooja

    Hi Pooja,
    Please go to properties for your cancel button (submitButton I suppose), then find properties 'Disable Server Side validation' and 'Disable Client Side validation' and mark both of them as true. This would ensure that validations are not automatically triggerred in case of Cancel button click.
    Do feel free if you need additional information.
    Regards
    Sumit

  • How to set the disable,visible property in declarative components.

    We have used one declarative component. It consists of 5 buttons (add,delete,save,delete,print). In all of our pages, this declarative component is used. We could bind methods and was able to use each pages seperately (by linking the methods in the backing bean)
    But for implementing the DISABLE,VISIBLE properties, we have added the attributes for this and refered this to the corresponding disable and visible property of the button. In the page all these properties where reflected. But at the runtime these buttons are not coming.
    Can anyone advise how can we set the disable,visible property in declarative components.

    Hi vikram ,
    i hvnt initialized the properties ,
    in my declarative component i have one button say Save button and i want to config 2 properties Disable and Visible
    i added two attributes ( java.lang.Boolean ) say disablr_btn ,*visible_btn* and mapped wth the Save button Properties Disabled and Visible using expressions
    Now the button is invisible while running the page.
    if i remove the mapping from properties Disable and visible , the button is visible
    should i init the properties in faces config , i dnt knw hw to init the properties
    pls advice

  • Controlling Properties via Reference

    I have a cluster of numeric controls. I would like to control the properties (Disabled, Visible, Value, NumText.Format and NumText.Precision) of these individual controls by passing one reference from the cluster on the main vi, to a sub vi.
    Within my subvi I wire my cluster reference to the Controls[] property to get an array of references to the elements within the cluster that follow cluster elements order.
    Using this array of references I find property options available for Disabled, Visible and Value properties, among others. There are no options, however, for controlling NumText.Format and NumText.Precision.
    Any suggestions, or perhaps there another way to approach this?
    Thankyou!
    Jim Haas
    Solved!
    Go to Solution.

    The array of control references will be of a generic class, and therefore cannot have specific propertiies set. To gain access to the specific control properties you must cast to a more specific class first. If all the controls are of the same type, you can simply cast them all, using the "to more specific type", to numeric types. This should make the NumText properties available for setting.
    Thoric (CLA, CLED, CTD and LabVIEW Champion)

  • How to Disable the SUBMIT Button using the formula.

    Hi. Govindu and ohters.
                       I really appreciate your efforts in helping others.
    I am currently working with VC 7.0. Where I am working with Validation of Data.
    we have input buttons( fields) like Emp, Earea, Joining date (month & Year), Ending date((month & Year) etc.,
    Here we have one submit button 'submit'.
    Here what my client asks is unless and until, user fills all details then only
    the submit button should be enabled. Otherwise submit button should be in disable mode.
    I could be able to write formula for 'submit' button's properties( Disable) like this.
    BOOL(IF(LEN(@Emp_code)0 AND LEN(@Earea)0 AND LEN(@Edept)0 AND DSUB(DVAL(@Joining_date), DVAL(@Ending_date),'D')<0 ,false,true))
    Here condition is always make sure that 'Joining date' should be greater than 'Ending date' . where it is working fine for all fields except Calender Year month(Joining date & Ending date).
    the calender year month format is Example : """" May 2007""""
    But it is considering only month But not year.
    Can you kindly provide your inputs.
    Edited by: Vijay Kumar on Dec 2, 2008 10:51 AM

    Hi. Murtuza.
                        Thanks for Your valueable reply. I have already been trying with the following formula.
    But still I am not getting expected result.
                   BOOL(IF(LEN(@Material_Type)<>0 AND  LEN(@Plant)<>0 AND LEN(@Vendor)<>0 AND
                                           DSUB(DVAL(@To), DVAL(@Calendar_Year_Month),'D')<0 ,false,true))
                    I don't have any problem with   input buttons( fields) like Material type, Plant, Vendor.
                 But _'Calender Year  Month From'  should be  less than  to 'Calender Month To' then only the submit button should be enabled. Otherwise submit button should be in disable mode. This is not working.
                                     The calender year month format is Example : """" May 2007""""
                                                But it is considering only month But not year. 
       means It only considering Month only, It is not considering the Year. Please let me know the your information on this.
                                Thanks and Regards
    Edited by: Vijay Kumar on Dec 3, 2008 10:35 AM

  • Internal Error Code: 12024, 24704628, 24704922, 27638133

    I'm experiencing the FM crash / internal errors while printing some pages in a book since yesterday. The FM I have is v12.02.389, and I'm authoring in unstructured mode as well. I'm wondering if this was the same issue but I'd like to describe this error here rather than create a new but possibly a duplicate post.
    FM version: 12.02.389
    Internal Error Code: 12024, 24704628, 24704922, 27638133 (I was kind of surprised that four errors came all at once! Man, that's a whole bunch of zombies!)
    Repro:
    1. Open an existing fm file with more than 3 pages. (The reason of doing so is I was about to print page 64 to 69 of this chapter to PDF)
    2. Go to Print Setup > Properties, disable the "Rely on system font...".
    3. Save the changes then go back to File > Print and set the pages to be printed(say, 64 to 69).
    4. Click Print (to PDF).
    Then I saw the progress bar moving but when it reached to the end, a prompt message box came up saying something like  "Framemaker 12 closes due to Internal error 12024, 24704628, 24704922, 27638133".
    I'm wondering if it's a bug or it crashes due to some improper settings? The FM12 was doing OK in the past. I've no idea what's going on. I was trying to look for the troubleshooting guide or similar stuff which might allow me find out the solution based on the error codes presented in FM12, but all the search ended up in vain.

    Ok, dude you don’t need to go on with the details – only Adobe engineers understand the error log stuff – not us mere mortals here. You had already posted on this thread - https://forums.adobe.com/message/6683383#6683383 – no need to go off the deep end here. Yes, you should send the error log in & yes, if you can create a simple example of lorsum text and make it break, then you should file a bug report using the new bug tracking system. Giving Adobe a concrete example to play with helps them out a lot.

  • Homehub 2 trouble

    I have recently bought a new laptop and got a homehub 2. The problem is that every time I switch the laptop on it wont connect and goes to a troubleshooting page. This page tells me to reset the hub and after a short while it will connect but as you can imagine this is a bit of a pain every time i turn the laptop on. Can anybody help resolve this issue. Thanks dave

    better still try changing the wifi adapters properties, disable power save mode on the thing and it wont happen,
    the fact your getting hte wifi connection proves the wpa problems isnt there, oh and constantly rebooting the hub will mess up your internet
    if your not sure what to do, please feel free to ask but do yourself a favour and google for it if its not in the windows help pagees.

Maybe you are looking for