Palm TX won't work with new wifi router

I have used a Belkin 54g for years with no problem. I set up a Netgear N300 and my Palm TX won't connect. I even tried using guest connect with no security and still nothing. I'm stuck. All of my other equipment connects just fine.

Hi and welcome to the Forums.
If you have not already been through it, please review the Wi-Fi Checklist thread which is "stickied" to the top of this board. Hopefully something there will resolve your connection issue.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Similar Messages

Elements 13 won't work with new camera, it won't update to raw 8.7.1

Elements 13 won't work with new camera, it won't update to raw 8.7.1. I have downloaded the patch, it is installed but the old version is this there in elements. Thanks, esther

OK I think the problem is probably related to the platform swap and you may need your account re-set. Only Adobe staff can do that. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number and previous case number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

Satellite A110 - WiFi switch is not working with new WiFi card

Hello Everyone
I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
Please help

Hi
Maybe you could enable the Wlan card using different way;
Go to device manager -> WLan card properties -> Advanced tab
There you could check if there is a option which would enables the WLan.
Its worth a try
Otherwise its a compatibility issue like suggested by PinkPanther
I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

EPrint does not work after new wifi router on Verizon DSL

I have been using ePrint on my iPod, iPad, and iPhone for a few months without a problem, but recently had to switch to a new wifi router on my Verizon DSL, as my wifi kept turning off and Verizon's solution was an updated wifi router. Since the switch, I cannot ePrint from my mobile devices. I can, after reconfiguration, print from my laptops. The ePrint app still finds the Deskjet 3050a, says "sending to printer", but will not print. The ePrint is turned on. I tried to delete the app and reinstall in hopes that I can start fresh, but it still does not work. I tried to add a new printer, with the email supplied on the ePrint screen on the printer, but nothing.
Any ideas?

Hi Honor Student
Is your printer connected to the new router as it sounds like it is still looking for the old one ? Maybe just disconnect it and reconnect it again to your new router and then the ePrint APP should pick it up.
I work for HP.
Thanks
Caroline
Although I am a HP employee, I am speaking for myself and not for HP.

1st Gen iPod Mini won't work with new version iTrip

Hello all,
I cannot get my new iTrip (which connects to the bottom of the iPod) to work with my girlfriends iPod mini 1st generation. The new iTrip works fine on my video iPod but not on her mini.
We had the original iTrip and that worked fine but nothing is happening at all when the music is playing and the iTrip is connected. Anything i need to do or install to get this working? I have tried to search the discussions but failed to find a similar problem.
Any help or info will be much appreciated.
Many thanks.

Ah, i seemed to have fixed it! Well i've been trying for a few weeks now to sort this out and as soon as i put up a post it works. Oh well at least its working now. It seems like that the iPod needs to be playing BEFORE the iTrip is plugged in the turn it on.
I'll get me coat...

Palm Centro Desktop not working with new install

I just got a Palm Centro (AT&T) and installed the software. I already had Palm Desktop from my Treo 650. My information came over to my phone during Hotsync, but I can not use my desktop. When I start the program, it says there is a problem and windows is shutting it down. I am using Vista. Can you help?
Post relates to: Centro (AT&T)

Try re-installing the software and do a repair of the install. If that doesn't work then you will need to do a "clean" uninstall and then install Palm desktop again.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before create a hotsync name.
Post relates to: Palm i705

Printer won't work with new router

When I installed my new E3200 router, my printer would no longer work from my remote lap top. It works from my desktop where it is installed, but not from the lap top.

Turn off file and print sharing on all computers, reboot. Now enable file and print sharing and reinstall the printer from the laptop. Turn off all firewalls for now.

Iphoto won't work with new osx

how do I upgrade iPhoto so it works with osx

This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
OT

With new WiFi router, iChat keeps logging me out. why??

Two days since I plugged in new Verizon WiFi router and the iChat application keeps logging me out whenever computer is in idle mode. I have to go to Preferences and change Port to 443 SSL and when that stops working, change back to 5190. Any way to set this so I don't have to manually change the setting several times a day?
Thank you!

Hi,
Can you tell me what you mean by Application Sleep ?
I have an iMac myself and tend to be using the computer for about 3 hours of an evening then I shut it down.
During that time any app I have open is in full use mode even if it is not the "front" app.
An AIM Login has been able to use an SSL Login since iChat 4.
It has been the Default option in use.
However it does have issues if there are micro breaks in the Internet service you are getting.
This means that iChat or Messages gets Logged out but the app will not log back in again Automatically.
Not using SSL has a better record of Logging back in on disconnection.
The Dropping completely under SSL can only be solved by Unticking "Use this Account" and then Selecting it again to Login afresh.
It should make no difference if the Buddy list(s) are set to Away as you are still logged in continuously in that state.
As SSL is supposed to be more secure it needs the definite manual intervention so that it is known that "you" wanted to Login.
Although micro breaks can happen when using Ethernet they are less common.
We are mainly talking about WiFi drops that effects constantly connected app like iChat and Messages that can then spot the smallest of "no internet" time that the Mac may not even register with the Menu Bar icon for Wifi and is not noticed in Apps like a Web Browser that then take a few moments longer to show a Page or the Mail app taking just a bit longer to fetch mail as these apps are in fact now the then users of the Internet connection.
I would try an check if the WiFi signal appears to vary around your house.
Use the Drop down from the WiFi icon in the Menu Bar to see the Bars for your device.
It could be interference from other close by routers.
All routers can use several Channels (minor divisions in the radio band they use).
Most come factory set on a middle number of the range that can be applied.
It may pay to use a number closer to the end of the range (top or bottom)
iStumbler can be used for closer details including the channel info for close by routers.
It's last update was for Snow Leopard which means it should work on Intels.
You may need to go to System Preferences > Security and Privacy > General tab and set the Application Download options to "Anywhere" as it is not on the App Store.
8:00 PM Friday; March 29, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can't get airport express to work with new wireless router

I just swapped out a linksys wrt54gl for a linksys E1200 wireless router on my home network. My PCs and iPads, and TV all made the switch to the new network fine, but the airport express isn't working. All I want to use it for is to transfer iPad audio to my home speakers. but my iPad AirPlay shows the old Airport as an option, I can switch to the Airport, no sound comes out the home speakers, then the iPad reverts AirPlay back to iPad. This model Airport just has power, USB, and LANA ports, so it doesn't seem like it would be complicated. A CAT 5 cable goes from the airport WAN port to one of the ports on the back of the new wireless router. What did I overlook?

I thought I'd jump in here with you network experts for some help with a related networking problem.
Equipment: iMac 24-inch, Early 2009 2.93 GHz Intel Core 2 Duo; 2 MBP w/Retina Display; AirPort Express version 7.6.4 (Conncected Using: DHCP; Router Mode: DHCP and NAT); Comcast/Xfinity Gateway 1 Modem w/2.4 GHz WiFi.
#1. Comcast forced me to change modems to their Gateway 1 saying mine was at “End of Life.” Previously, my home network was set up with AP Express and worked fine using my iMac as a server. After installing the Gateway 1, I could not get my network to work after repeated calls to their support, online chats, trial and error, reading community chats and articles, etc. I put the Comcast modem in passive mode using the “Bridge” setting and re-established my network with my AP. I’m using my iMac as a server for file sharing with my two MBP’s. The network isn’t recognized in sleep mode and will not wake from sleep and I can’t find it or Connect to Server when the computer is asleep. I’ve tried all combinations within the Energy Saver/Screen Saver/Security preferences. I’ve reset the SMC and other like resetting to factory defaults. How can I fix this and what are the correct settings for my home network to function again with my AP Express?
#2. TimeMachine stops doing backups when the computer is in sleep mode, understandably because I’m not making any changes on the iMac that need to be backed up. But using my laptops on the network, I am making changes in shared files that are hosted on the iMac that I would like backed up. I cannot get the schedule feature to work to wake up the computer long enough to do a backup nightly because, as a security feature, I log out after 30 minutes of inactivity. I understand the schedule doesn’t work unless you’re logged in. Is there a way for me to make this work?
Thanks!

Express has stopped working with 2Wire WiFi router

I have AT&T U-verse service and used the supplied 2Wire router as the WiFi hub. Because of the other devices in our home, I have to keep the security setting on the network on "WPA-PSK (TKIP) and WPA2-PSK (AES)". Otherwise the devices can't connect.
I have always used an Airport Express joined to the network to attach a USB printer and stream music to a stereo receiver. It has always worked, though it would occasionally mysteriously need to be reset and set up again to work with the network.
Last week the Express stopped working again. This time it will not rejoin the network. After many tries, I have determined that the Express is not broken. It will connect with the network if I turn security off and if I set security on the network and the AX both to "WPA2-PSK (AES)" but if I keep the security setting on ""WPA-PSK (TKIP) and WPA2-PSK (AES)" on the network it won't connect -- it accepts the settings then flashes amber, stops showing up on Airport Utility at all and has to be reset again. This occurs whether I set choose "WPA/WPA2 PERSONAL" or "WPA PERSONAL" with Airport Utility
As it happens, an AT&T technician was out here today and he told me that AT&T sends updates to its gear, which might explain why the AX gets knocked off the network from time to time. Still, that doesn't explain why I could always fix it before and can't fix it now.
Any thoughts on a possible solution?

Follow-up: I gave up and attached an old Airport Extreme base station to the 2Wire router and turned off the wireless on the 2Wire. Sort of a waste, since I need an extra device to do what the 2Wire used to do alone, but everything works again.

Photosmart C4780 won't work with new Time Capsule

All of our household machines (2 MacBooks and 1 iMac) worked just fine to print wirelessly to our HP Photosmart C4780 with our time capsule, 1TB. The hard drive on that failed, and we replaced it with a new 2 TB model. Everything runs fine off the new wireless network except for the printer. The printer is not hooked to the Time Capsule, and I don't want it to be as it's in an odd location. The printer worked just fine before, off by itself in a corner, not hooked to any computers or Time Capsule. We are running OS 10.8 on 2 machines and OS 10.6 on another. I've read every troubleshooting article and community post I can find, trying everything, and no luck. I've restarted everything. I've reset the printer network settings. I've deleted all printers from the computers, but in every case, the printer cannot be detected on the wireless network. I run the Print & Scan utility in System Preferences, and the printer is not located. I run the HP Setup Assistant, and it can't find the printer. If I hook it up via USB to any machine it works fine, and I even tried running the HP Setup Assistant to setup wireless via USB, and that can't find the wireless network either. The Time Capsule is on all default settings, exept I changed the name and password. Neither has any special characters. I tried the suggestion of channel 11 and that didn't work. I printed out the wireless network test report, and the Network Name (SSID) Found diagnostic failed. I printed out the HP Network Configuration Page and it says network Offline, URL for embedded web server is http://0.0.0.0, and the 802.11 Wireless status is Disconnected. At the bottom where it lists the Number of 802.11 networks discovered, my home wireless network is at the top of the list. I know wireless is enabled on my printer because I've disabled and enabled it, plus the blue light is on above the wireless icon.
I cannot think of anything else to try and I'm about to launch the printer out the window! Please help in any way.

You're close. After opening Airport Utility/TimeCapsule/Edit, look at the bar at the TOP of the page for Airport Utility, not at the top of the inset box. That Base Station drop down has the WP Printer option. I'm using 6.3.2. Try that.

Mail Won't Send with New WiFi

Just switched internet providers. Internet and incoming mail work fine, but outgoing messages won't send. My outgoing mail server is my sever at work. How do I get my messages to send?

tridaddy wrote:
Just switched internet providers. Internet and incoming mail work fine, but outgoing messages won't send. My outgoing mail server is my sever at work. How do I get my messages to send?
You should post this to the Mail forum under Mac OSX 10.6.
There are literally dozens of things that need to be done to fix this, up to and including your new internet provider blocks SMTP mail servers.

IPod Click Wheel (4th gen) won't work with new head unit

Hi all,
Not sure if this is the right forum but... I just put a new head unit in our 2000 Mazda Miata. It's a JVC Arsenal KD-A806. I have tried using the front and back USB ports to connect the iPod and all I get is "reading" over and over and then "not support" on the head unit display. And the "do not disconnect" on the iPod. I've tried different cables and I know the head unit is ok because my husband's Samsung MP3 player works just fine. Is there something with the iPod that might not be up to snuff? I've confirmed via iTunes I have the latest software v3.1.1. It has about 4,000 songs on it.
Thanks in advance - I haven't been able to find any resolution anywhere else.

Mean to say KD-A805 (not 6) and I just found a link saying that you can't connect my iPod to this unit via USB....

1st Gen iPod Nano won't work with new Nissan interface.

I just bought an 09 Nissan Cube that has the factory ipod interface where you can control everything through the steering wheel and radio, well my ipod has been great, yes old, but works great and always has in other cars such as the Scion xB I just traded in on it, using the same type of system.
Well, when I plug it into my new Cube, it charges fine, but just keeps saying "Ok to Disconnect" and goes back and forth to that and the 1st menu screen all the time.
I did a reset where you hold the middle button and the menu button for 6 seconds, but that did not fix it. I'm at a loss.
I know the interface works because we tried another newer ipod and my iphone works as well.
Any ideas? I don't want to spend the cash to buy another ipod.

Ah, i seemed to have fixed it! Well i've been trying for a few weeks now to sort this out and as soon as i put up a post it works. Oh well at least its working now. It seems like that the iPod needs to be playing BEFORE the iTrip is plugged in the turn it on.
I'll get me coat...

Palm TX won't work with new wifi router

Similar Messages

Maybe you are looking for