Panel is slow to load

Hi All,
I have an application with several panels. Two of these panels have several sub-panels each including tabbed panels. When I call them up they load slowly, but not too bad while I have the application in debug mode. When I build and deploy, my tester is seeing huge delays in the loading of these panels. I have tried peppering the code with ProcessDrawEvents() calls which don't seem to make much difference.
Any suggestions are welcome.
Thanks in advance.
Judy

Almost forgot. I am attaching an example...
Attachments:
CalPanelScreenShot.JPG ‏72 KB

Similar Messages

PS CC 2014 very slow to load and operate after 2014.2 update

I updated my Photoshop CC 2014 64bit today. It was working perfectly up to the update. Since the update, PSCC 2014 has been very, very slow to load and slow in use. I have uninstalled PS used the PS Cleaner and reinstalled through CC Desktop. The speed problem remains. Interestingly, 3D is the Menu feature that seems to take the longest to load. In other words, the program eventually loads, but 3D appears 6 or 7 seconds later. I don't know if this is significant. The setup was working fine up to the update.
Grateful for any ideas about what may be the problem and what I can do about it.
My system is a 3770K, with 32Gb ram, x4 SSDs one dedicated to OS and programs and the others to data, and an Asus GTX660 (2Gb) graphics card. I am using the latest driver from the Nvidia site. OS is Windows 7 64bit.
I am getting no error messages - just great sluggishness.
Thanks.

Sorry for the delay in responding. I had to get some sleep.
Changing "sniffer" made no difference I'm afraid. I have put it back to "sniffer.exe" having tried reopening with "~sniffer" twice with no success.
Resources. The maximum cpu resource used during the period from clicking the desktop icon to the menus in the program becoming usable is 23%.
At the end of the splash screen when "initializing panels" is briefly on the splash screen, the line for the resource meter for the cpu went red and said "not responding" - the red disappeared once the workspace was active:
Do you need anything more?

5.0.5 so slow to load

I have a new MacBook Pro running 10.6.8 and all of my browsers run well and load quickly EXCEPT Safari which is painfully slow to load EVERY single time. I have cleared cache and more...
anyone else having this problem?
It is as if SAFARI runs in MOLASSES MODE!
Help?

From your Safari menu bar click Safari / Preferences then select the Security tab. Deselect: Enable plug ins Quit then relaunch Safari. If Safari speeds up loading pages, troubleshooting help here. Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Check Safari / Preferences - Extensions. If you have any installed, turn that off, quit, relaunch Safari.
Quit Safari. Open a Finder window select your Home folder in the Sidebar on the left. Then open the Library folder, then the Caches folder, then the com.apple.Safari folder. Move the cache.db file from the com.apple.Safari folder to the Trash. Relaunch Safari.
Check for Login Items: Open System Preferences/Accounts then select the Login Items tab. Delete any files or apps you have listed there. And go to /Library/Startup Items. Move any files in the Startup Items folder to the Trash.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space.
From the Safari menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.
Try Safari in another user account. Same problems there, then log back into your admin account, launch Disk Utility. /Applications/Utillities.
Select MacintoshHD in the panel on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions). If the startup disk needs repairing, follow the instructions for Using Disk Utility to verify or repair disks

SWF slow to load, and removing sound when uploaded

Hi,
I've created a swf file from Flash CS5, running a video player and FLV, which plays fine locally, and when previewing from dreamweaver CS5. However, once it's all uploaded (video file, swf, html), the file is very slow to load and then doesn't play sound.
It can be found here: http://andypowell.co.uk/wateraid-drtv-inserts-door-drops-online-banners.htm#&panel1-1
I've had this issue before with the swf files on panels 2-4 and managed to fix it, but I can't get through it this time. Any help would be much appreciated.

Flash is a dead web technology because the most popular mobile devices can't support it. Use HTML5 video. You'll reach a wider audience with less code and fewer problems.
http://www.w3schools.com/html/html5_video.asp
Nancy O.

Why doesn't my MacBook finish connecting to the ISP? It is very slow to load graphics if it does connect.

Why doesn't my MacBook finish connecting to the ISP? It is very slow to load graphics if it does connect. This happens with ethernet or wifi.

Timothy ..
Contanct your ISP for support but keep in mind, if your Mac is running v10.5.8 as your profile suggests, that is a very outdated OS X and you may have issues loading graphics at this point.
If you are using Safari, empty the Safari cache then quit and relaunch Safari and try loading an image.
And make sure there's enough free space on the disk to load images.
Right or control click the MacintoshHD icon on your Desktop then click Get Info.
That will open the Get Info panel.
Check Capacity and Available. Make sure there's at least 15% available disk space.

The Document Information Panel was unable to load. The document will continue to open ?

I am using Sharepoint 2010; DIP in microsoft word all the while is working fine, not sure why suddenly it came out the following error when save word doc into sharepoint.
ERROR MESSAGE
===========
"The Document Information Panel was unable to load. The document will continue to open.
The form contains schema validation errors.
Content for element 'documentManagement' is incomplete according to the DTD/Schema. "
How to troubleshoot? Recently I added lookup column and a workflow into the library, but I did the same thing in another library which never appear to have any issue on it.

The lookup column is creating the problem , you can find powerscript solution to fix this issue , please check this -
Fix through Powershell
http://blogs.msdn.com/b/tehnoonr/archive/2012/05/17/sharepoint-2010-document-information-panel-fails-to-load-when-office-documents-are-opened-in-a-library-that-contains-lookup-columns.aspx
Fix through Code
https://social.msdn.microsoft.com/Forums/office/en-US/2a4d6d10-d1d5-4d6a-a22b-62dfb6b60685/lookup-field-creation-and-document-information-panel?forum=sharepointdevelopmentlegacy
or try this -
https://social.technet.microsoft.com/Forums/office/en-US/2552fbc8-da24-4d2b-84f6-d39c4d58b137/the-document-information-panel-was-unable-to-load-the-document-will-continue-to-open-for-more?forum=sharepointgeneralprevious
1. Open this location- C:\Program
Files\Microsoft Web Designer Tools\Office12\1033\IPEDINTL.DLL
2. copy IPEDINTL.DLL
3. paste it here- C:\Program Files\Microsoft
Office\Office12\1033\IPEDINTL.DLL
4. Close all the applications that are presently
open as well as all the browsers
5. Open the sharepoint site in a new browser
and check the results !!
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.

Hi Guys,
I am creating the library using object model with custom content type. When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
Document Information Panel cannot open a new form.
The form contains schema validation errors.
Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
But after saving the document, then meta data is enabled.
Thanks in advance for suggested solutions.
thanks
Santhosh G

Hi,
For a better troubleshooting, I suggest to do as follows:
1. Please try to update the Location column's schema by following the steps below.
1) Go to Site Settings -> "Site Columns"
2) Click on "Location", after the page is opened. Don't modify any settings, click "OK" to forcibly update the field's schema.
2. Re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
3. Here are some similar links about your issue, please take some time to look at them:
http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
More information:
SharePoint 2010: Creating a Custom Content Type using Visual Studio
http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support

Error: "The document information panel was unable to load"

Hello,
I have created a custom document content type that uses a specified word template for a sharepoint document library for contracts and offers, and added a few custom columns in the document library as well. The word template launches succesfully when creating a new item in the document library, but the problem arises when I add custom columns to the word template content type. When the document loads in Word, I get the following error: "The Document Information Panel was unable to load. The document will continue to open. For more information, contact your system administrator." And in details:
"Document Information Panel cannot create a new, blank form.
Document Information Panel cannot open the form. To fix this problem, contact your system administrator.
Form template: http://servername/sitename/proppanel.xsn
The following DataObject either cannot be created or cannot be initialized: list_033AA217-8906-447E-A604-A300F51D4030
Document Information Panel cannot add the following object to the DataObjects collection: list_033AA217-8906-447E-A604-A300F51D4030
list_033AA217-8906-447E-A604-A300F51D4030 could not be added to the DataObjects collection.
The following item already exists in the collection: list_033AA217-8906-447E-A604-A300F51D4030"
Interestingly enough, I have two web applications running on the same server that I have tried to implement this on, and on the other it works flawlessly, meaning that the Document Information Panel launches successfully and I can edit the columns associated with that content type and store the values in a document library. I have also tried to save the DIP template from the working web application and use it as the default DIP template on the other application, but that doesn't work either.
I have also tried to browse through all options and configurations in the application settings in CA and SSP, but to no avail. Any suggestions about what might be causing this problem or how to fix it would be greatly appreciated.
- Sebastian Eriksson

Hi All,
I have the same problem with my DIP in already two of my document libraries. Please see below:
Document Information Panel cannot create a new, blank form.
Document Information Panel cannot open the form. To fix this problem, contact your system administrator.
Form template: http://servername/sitename/proppanel.xsn
The following DataObject either cannot be created or cannot be initialized: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
Document Information Panel cannot add the following object to the DataObjects collection: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
list_295E77CD-1C08-4DDC-A188-F86107F9BF60 could not be added to the DataObjects collection.
The following item already exists in the collection: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
I have made the same thing that Kirikou has suggested and I was able to recreate the broken library. The problem is that Kirikou's way has failed on my Share Point staging installation:
[COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))]
   Microsoft.SharePoint.Library.SPRequestInternalClass.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +0
   Microsoft.SharePoint.Library.SPRequest.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +125
[SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))]
   Microsoft.SharePoint.Library.SPRequest.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +166
   Microsoft.SharePoint.WebPartPages.ListViewWebPart.RenderView() +4239
   Microsoft.SharePoint.WebPartPages.ListViewWebPart.EnsureData(Int32 token) +658
   Microsoft.SharePoint.WebPartPages.SharePointDataProvider.Execute() +254
   Microsoft.SharePoint.WebPartPages.SPWebPartManager.ActivateV2ConnectionsAndSharePointDataFetch() +139
   Microsoft.SharePoint.WebPartPages.SPWebPartManager.ActivateConnections() +85
   System.Web.UI.WebControls.WebParts.WebPartManager.OnPageLoadComplete(Object sender, EventArgs e) +52
   System.EventHandler.Invoke(Object sender, EventArgs e) +0
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +2063076
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1875
I will be very appreciated if somebody knows what is the reason for this problem.
Best regards,
Yordan Nikolov

The Document Information Panel was unable to load.

Platform: SharePoint 2013, Office 2013.
Background: When you open an Office document from SharePoint users get this error:
The Document Information Panel was unable to load. The document will continue to load. For more information, contact your system administrator."
"The form cannot be opened. To fix this problem, contact the form designer. Form template:
http://<site address>/../proppanel.xsn. The XML Schema for the form template has an invalid value for the following attribute: location."
I tried running this fix: http://www.cb-net.co.uk/microsoft-articles/2063-sharepoint-2010-templates-and-document-information-panel-errors, but it kept saying that it couldn’t see the url that
I specified (I did check this carefully); think it might only apply to SharePoint 2010 – perhaps the shell syntax is different in 2013.
Can anyone help me out?

Hi Alex,
According to your description, my understanding is that the error occurred when opening a document from SharePoint.
Is this document information panel customized?
I recommend to re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
Best regards.
Thanks
Victoria Xia
TechNet Community Support

The Document Information Panel Was unable to load. Please Help

Hello all,
I just recently created my own custom Document Panel in InfoPath. I uploaded it into a custom content type. I applied this to a document library and it is the standard document panel for creating a new document within that document library. When I click
"New document" I get this error..
The Document Information Panel was unable to load. THe document will continue to open. For more information, contact your system administrator.
Details:
Document Information Panel cannot open a new form.
The form cannot be opened. To fix this problem, contact the form designer.
Form template: http://Mysite/_cts/DIPTestContentType/Myfirstform.xsn
The SOAP response indicates that an error occurred on the server:
Exception of type 'Microsoft.SharePoint.SoapServer.SoapServerException' was thrown.
<detail><errorstring xmlns="http://schemas.microsoft.com/sharepoint/soap/">No item exists at http://Mysite/My DIP Test.docx. It may have been deleted or renamed by another user.</errorstring><errorcode xmlns="(html
for the error code..had to delete it because my body text cannot contain images or links until my account is verified but it is a link to Microsoft support)
...It appears that it is not locating the custom Document Panel.
Could anyone point me in the right direction?
Thanks

Hi Alex,
According to your description, my understanding is that the error occurred when opening a document from SharePoint.
Is this document information panel customized?
I recommend to re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Web pages slow to load with IE11 and the cursor/mouse is very slow to work until after page loads

Web pages are very slow to load, I hve run Norton Eraser and found no issues that would cause this

New HP Pavilion three weeks ago. After several attempts by the 'experts' I finally got a straight answer from a tech in the Philipines yesterday, 01-29-2015. HP and Microsoft are working to resolve the issue of slow pages and a dead cursor until the next page finally loads. You may have discovered that Google Chrome DOES NOT have this issue. Comments about HP would not be allowed here so I will just say, use Chrome until the issue with IE 11 is resolved.

Firefox 4.0 keeps locking up and is slow to load pages

I just installed 4.0 this morning. Ever since, Hotmail is extremely slow to load, it keeps locking up or not responding.
I thought this was supposed to be faster and more streamlined?
Now, when I try to go back and install 3.6.13 it is no longer available. What gives? I want my old Firefox back.

http://www.mozilla.com/en-US/firefox/all-older.html

Since upgrading to ios8, pages very slow to load, and can no longer read items in my reading list when offline. ?????

SI since upgrading to ios8, Safari pages are very slow to load, Kindle crashes upon opening, and I can no longer read saved artices from my reading list when offline. Big disappointment. Is it possible to downgrade to previous ios?

I actually managed to fix it! But unfortunately I don't know what I was that I did that helped.
Anyways, this is kind of what I did.
1. I tried to reset form bakup via iTunes, no change.
2. I tried to reset as a new iPhone, problem still there and reading list also as bookmarks!? (several hundred)
3. Noticed that I could delete a bookmark, once in a while, the other times I got the 'Bookmarks are being synced. Please edit the bookmarks once syncing has completed.' message.
4. Because I figured that it was a memory problem, I thought it made sense to delete as many as possible, witch I did.
5. Noticed that it was more likely that I coould delete a bookmark if I restarted Safari.
6. Notice that it was even more likely that I could delete a bookmark if I turned the Safari sync with iCould off (with option detete information on iPhone) and then back on again.
7. When I was about half way through deleting the bookmark list I suddenly discovered that all but one of the items in my reading list was 'waiting' and one was downloading. I kind of was 'unstuck' now.
8. I started to delete items in my reading list, but every other time I got the 'Bookmarks are being synced. Please edit the bookmarks once syncing has completed.' message.
9. It took a while to delete all bookmarks and items in the reading list.
Hope you guys could use the info here to fix your problems too!

Mac seems slow to load web pages and email since mavericks upgrade

Since upgrade from Mountain Lion to Mavericks on my iMac, web pages seem a lot slower to load on screen. Also, when I open my mail inbox, the mail content (wording) takes a long time before appearing on the right hand side, then followed a little later with the display content. I have synchronised all my mail accounts and also emptied my cache in the safari browser, but this has not resolved the problem.

Go to Applications (you can do this by clicking on the desktop and hitting cmd-shift-A). Within the Utilities folder you should see a program called Terminal. Launch this program, which should just be a window that you can type into. Type the following (or just copy and paste into the window) and hit return:
     networksetup -setv6off Wi-fi
Then go back to Network Preferences and verify that IPv6 is set to off. If that doesn't help, enter these two commands in succession:
     cd /Library/Preferences/
     sudo mv com.apple.security-common.plist ~/Desktop/
Note that this moves a configuration file onto your desktop. If that doesn't fix things you may want to put it back:
     cd /Library/Preferences/
     sudo mv ~/Desktop/com.apple.security-common.plist .
Good luck!

Firefox is slow to load and view pages and repeated "Firefox is not responding" message

Firefox is quite slow to load and view pages with and I keep getting the "Firefox is not responding" message.
I have the latest version, plus the latest Adobe Flash Player, Shockwave Player, etc.

Note that Firefox 36 has been released officially.
*https://www.mozilla.org/en-US/firefox/36.0/releasenotes/
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Panel is slow to load

Similar Messages

Maybe you are looking for