Paper will not thread

just set up printer and paper will not thread,

I want my program to send all forms to printer same format same size is there any suggestion??Produce a PDF... effectively delegating printing there-of to someone else. Problem solvered.
Your PDF options are (AFAIK) FOP or itext.
Cheers. Keith.

Similar Messages

  • 1102 Paper Will Not Feed Follow-up Questions

    The diagram that you sent to the other person with this problem - paper will nopt feed - does not match MY 1102. I cannot find the "Release Tabs" pictured in your diagram to remove and clean the roller. Secondly, I see that the 1102 has been discontinued - odd that HP did not tell me that as I just purchased two CE285A Print Cartridges through them. So what basic HP printer replaced the 1102, that uses the same CE285A Print Cartridge?

    Hi , Welcome to the HP Forums! I see that your HP Laserjet P1102w will not feed paper. I am happy to help!  Please try to go through the steps within this guide, Printer Does Not Pick Up or Feed Paper. If this does not resolve your issue, and to find out about newer HP printers, Please contact HP, phone support for further assistance. (After you fill out the information, you will be given a phone number.) If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Best regards!  “Please click the Thumbs up icon below to thank me for responding.”

  • Officejet pro 8600 paper will not feed , Starts to feed and then jams before getting to printer head

    officejet pro 8600. Has been flawless for 2 years. Now it start to feed the paper, but jams as the paper goes around to the printer. It seems like the paper goes straight up instead of curving aroun to the printer head.

    Hello @ceebrick , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are running into paper jams.  I would love to help.
    I would recommend performing a power reset on the printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then recommend this document on A 'Paper Jam' Message Displays on the Printer.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Flash Paper will not install on MS Vista Home Premium Edition

    Can any one help me install Adobe Flash paper 2 install
    properly on MS Vista Home Premium Edition?

    quote:
    Originally posted by:
    DoctorNic
    to machoja:
    >"Just right click the installer and select properties.
    Then select the compatibilty Tab. Once installed Do the same to the
    link in your Programs list. "
    I am having the same problem. When I start the install from
    the install disk, installer starts but doesn't allow any right
    clicking. It just starts the process. So how do you do this?
    Is there another way to get to installer?
    Mary

  • Paper will not be pulled into printer

    3040 printer is brand new, printed one day and woudn't pull paper into the printer the next day.
    This question was solved.
    View Solution.

    Clysta,
    Glad you found a permanent solution.  

  • Officejet Pro 8600 Plus paper tray will not go all the way in so cannot print

    Have loved this printer for almost two years but suddenly the drawer which holds the paper will not go all the way in so cannot print.  Took it to a so-called tech at Office Depot who said that because you cannot open/remove the tray, there is no way to see what is jamming it.  Any thoughts?  My first call for tech support was answered by a tech here in the US who said they had experience with it and it could be fixed and asked dme to call again when I was back in the office and at the printer.  The next four calls were answered overseas and they all had had no experience with this problem.

    Hi maebun,
    Welcome to the hp support forums.
    Thanks for your query.
    Please find the link for fixing paper jam. 
    Hope this helps
    I am a HP Employee.
    The opinions expressed here are my personal opinions, not of HP.
    Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
    Click on Thumbs up if my post helped you.

  • C4210 will not feed.

    The paper will not feed into printer. I have cleaned the rollers, but it did not help. The printer quit working after a paper jam occured. I cleared the jam and now it will not feed at all. I love this printer and I don't want to have to replace it. Help!

    Is this the a909a model?  If so see the troubleshooting page here, there is a firmware update that may apply as well as other troubleshooting steps.  If you have a different Officejet 8500 model then select the proper model here, then select "Solve a Problem" and then "Jams and Feed Problems" for troublshotting specific to your model.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Over heated paper will prevents two-sided printing.

    My new Laserjet P1102w seems to be overheating the paper.  Paper stored in a low humidity room will show visible steam when print is applied.  The paper is so hot that it curls enough that when you attempt two-sided manual printing, the paper will not feed properly. 
    Is this just a problem with my unit or is it typical of all Laserjet P1102w's? 

    Not quite what you asked,but on my cp1525nw I find there is a definite preferred printing side.  Try turning over the supply of paper in the input tray, this may make the curl much less prominent.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Adobe Acrobat Pro 9.5.0 will not print SRA3 size paper

    I created an Adobe InDesign file 320x450mm (SRA3) and saved it as a a High Quality PDF. However, when I print from Adobe Acrobat Pro 9 with SRA3 paper size settings, it defaults to A4 and the printer will not register the SRA3 paper size request. The tech from Canon updated the printer driver which increased print dialog options such as Paper Handling, Paper Source etc. (which I didn't have before) and spent over an hour running tests. We both agreed there was a software issue since there were not issues from other software:
    I can print SRA3 files from InDesign and Microsoft Word, but not Adobe Acrobat Pro.
    This is an ongoing problem since I often receive artwork in PDF format at this size.
    My workaround is to place the PDF into InDesign, line up the crops by eye and print to SRA3 paper which works fine until I need to do a double sided print which becomes slightly innacurate and often time consuming.
    Canon printer driver specs:
    V2.0
    iR-ADV C5045/5051 PS (UK)

    What happens if you select other paper sizes? Also ensure that 'choose paper source by PDF page size' is not checked at your print dialog.
    Kindly let us know your results and if possible please forward us your pdf at [email protected]
    Looking forward to help you out.
    Thanks
    -sonal

  • HP 6100 will not recognize paper in load tray

    hp 6100 printer will not recognize that it has paper in the load tray. have tried from two computers same result...add paper then try again. Tried troubleshooting with HP app and was informed printer was low or out of paper. Printer viewer does not give the add paper prompt but all other apps do. Have restarted printer...no go.

    Hi,
    Hold down the Windows Key and press R.  Into the Run Box type compmgmt.msc and hit enter.  Click Disk Management in the left pane and let the drives load up. 
    Does the 2nd HDD show here?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Photosmart Plus B209 - will not print photos - tray is not picking up the paper

    The printer will not grab the photo paper when I attempt to print a picture.  It works just fine when printing other things, such as text from WORD or something from the internet.  Photo paper says "single sheet feed" on it, so I place one sheet in the tray.
    Any ideas?  Am I doing something incorrectly?  Thanks

    Hi hgr7,
    I understand that you are having an issue with the photo tray picking up the paper. I will try my best to help you with this problem. In this document for The All-in-One Does Not Pick Up or Feed Paper From the Photo Tray there are several steps to resolve this issue.
    I hope this helps, let me know.
    Thank you,
    I worked on behalf of HP.

  • Officejet Pro 8600 (N911a) will not feed photo paper - Definitive Answer!!!!

    DUST IS THE CULPRIT!
    As per the HP support page for this specific problem, cleaning the rollerhead (The rubber part of the pick roller), is the solution.  
    HP Solution here (with pictures).  
    The specifics are found under the heading: 
    Solution four: Clean the paper rollers
    My printer was able to pick up regular paper, but not photo paper.  I updated all drivers (they automatically update weekly).  I tried every combination of paper in the tray: 1 sheet of photo paper, a large stack of regular paper with 1 photo paper, large stack with 5 sheets of photo paper.  Every combination failed, and the best it got was 1 page of photo paper with the next sheet underneath also coming with it.  
    I put the thing on its side, and used RUBBING ALCOHOL, (not water as they suggest... rubbing alcohol is much better for electronics, and pretty much any cleaning application.... evaporates very quickly), with a true lint free cloth.  Went over it several times with the cloth, rotating while cleaning, and used an AIR DUSTER to clean out the internals, and dry off the PICK ROLLER.  
    I RESET ROLLER POSITION to the original place, as shown in the HP Photo on support page.  
    Lastly, ONE SHEET OF PAPER at a time.  
    It took all that, and I'm still not happy with HP for this massive oversight... but it got my photos printing again.  Hopefully it will for you too!!  

    I managed to find a temporary solution as i need to print a photo urgently :
    I sticked a piece of scotchtape along the top border of the paper (on the back side) and then it could feed. And i don't know why, but after this first print with scotchtape, the next photo papers would feed normally.
    I hope it helps you guys. See the picture:

  • Officejet 7000 will not feed paper

    My Officejet 7000 will not take the paper from the paper supply tray.
    When I send a document to the printer it sounds normal as if the rollers are turning but after a few seconds it stops and the button with the paper icon flashes as if there is no paper (there is paper and I've reloaded and tried reprinting several times).
    Just prior to the issue, the printer was in the process of printing a multi-page document. About half way through printing one of the pages I heard a 'clack' type sound. The next page nor any subsequent attempt would feed into the printer.
    Any idea what is wrong and if it is worth fixing?
    Thank you.

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Printer will not feed paper

    Printer will not feed paper. Tried print doctor scan-- unplugging and  wiping rollers with lint- free cloth dipped in distilled water.  Did'nt work.  Printer is 5 yrs old.  Is it time for a new one?? Or anything else I can try?  I have HP computer-any recommendations if I buy a new inkjet? Need one that will accept card stock. Thanks in advance/

    Hello @99stonemo99,
    Welcome to the HP forums.
    I understand that your Photosmart C309 is not feeding paper.
    I would like to help.
    It sounds like you have done all the trouble shooting.
    Please review the following document for any missed steps.
    HP Photosmart Premium Fax (C309a and C309c) All-in-One Printers - 'Out of Paper' Error Message and t...
    If the printer will still not feed paper, then it is probably time for a new printer.
    The Photosmart family of printers is currently being switched over to the ENVY family. 
    The new printers are also eligible for the Instant Ink program.
    There are about fourteen printers.
    Eleven that you can click on to bring up the user manual.
    This user manual should tell you if the printer can handle card stock.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • CS5 will not print on new Epson 3880, message paper out or paper not loaded correctly

    CS5 will not print on new Epson 3880, message paper out or paper not loaded correctly

    In the Print dialog box, click Print Settings and verify the Paper Size you chose. This is important because the 3880 has three paper feeds (auto sheet feeder, rear manual feed, front manual feed). And for each major paper size you have to choose not only the size but also the correct feed. For example, if you want US Letter, choose US Letter, notice that this menu expands to five more US Letter paper size options, and choose the specific US Letter paper feed you want.
    If there is a mismatch between the paper size + feed combination you picked and the feed where the paper actually is, you can get the error that you're seeing. Because the Epson printer driver will look for the paper in a feed where there isn't any paper.
    So if you've added US Letter paper to the automatic paper tray, in Paper Size double-check that you chose the US Letter submenu command that says just US Letter, not one of the other options like US Letter (Manual - Front).

Maybe you are looking for

  • 10.1.1 Didn't save my work despite creating snapshots

    I recently installed Mavericks and FCP 10.1.1 on a fresh drive to test it out on a small work project. Nothing but FCP X 10.1.1 was installed on the drive. It's a Mac Pro 5,1 12 core with 32GB ram. I ran through the Lynda course and went at it. Afrai

  • I seem to have lost the ability to close windows at the top of the screen. What do I click on to change the look of the tool bar.

    I seem to have lost the ability to close a window at the top of the screen. I must have changed the tool bar in some way and I have no idea how to change it back. Any guidance?

  • A problem with Adobe Reader XI 11.0.03

    After I down loaded the product on my mac book, I am not able to open any PDF form, instead I get a black screen with this note: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then

  • How to lock Profit Center in SAP B1 8.8 PL10

    Hi All,             I am Using Profit cneter feature as Location for one of my client. Totally there are 12 locations( Profit centers). Now I got a situation where I need to lock few Locations (Profit Centers). Bcoz they are non Operative as of now.

  • JNLP Supported Servers

    Hi! Can someone please give me a JNLP supported and Java Web Start Supported Web Hosting Program� I tried geocities but it won let me upload it, something about invalid name. I would greatly apreciate it if some one would fix the geocity problem. Tha