PAPI connection to enterprise server

I have deployed a simple BPM process to the enterprise standalone server. The process receives input from a global automatic and then it has an interactive activity which has been made external.
However when I write a PAPI client following is the problem:
I have read the dir.prop file and created the session and reached till unified inbox. But when I try to create an instance info.getActivity or any such thing it gives 0 or null. However when I go to the workportal I find 2 instances in the inbox.
I would be thankful if someone could suggest how to do it via PAPI and changes to the method above.

Try waiting or retrying for a couple of times until you receive the right information.
If that works the issue you are having is that PAPI does not get updated fast enough. The fist instance info you receive has the result of the create instance is probably outdate by the time you read it.
A good approach is to try some time with a short interval until you get the desired info.
MAriano
MAriano Benitez
AquaLogic BPM 5.7 SP1 is now available!

Similar Messages

Internal Error When Trying To Connect To Enterprise Server

We are making a rather bold move upgrading from CD8.5 to CR2008. We have an enterprise server in place that can be accessed in 8.5. When I attempt to log in to the server using 2008, I get a weird error saying that an internal error has occurred for an unknown exception.
I guess the place to start is to figure out what that error message really means so we can try and fix it.
Any tips or suggestions?

Hello,
There have been changes in the way CR connects to Enterprise. You did not say what version of Enterprise you are using but it should also match the version of CR.
CR 8.5 is very old and since version 9.0 most reports designed and published to current versions of Enterprise will work. You'll run into issues though because CR XI R2 and above have cascading parameters which older versions do not know anything about. Designing reports in CR 2008 and publishing them to older version of CRS may not work 100%.
Depending on the version of Enterprise you should have a valid support contract and therefore can create a case on line and work with an engineer to explain in details. If your version of Enterprise is that old you'll need to upgrade it also to BOE XI R3.1
If you are trying to connect to Enterprise 8.5 or older it's not going to work from CR 2008. They need to match versions.
Thank you
Don

Unable to connect siebel gateway name server during configuration enterprise server

Hi,
when I try to configure Siebel enterpise after entering the port of the gateway server name I get the following error: "Unable to connect gateway server name".
I perform the following steps:
1) Configuration Gateway Server Name
     Entered port TCP/IP = 2320
     Enable automaticaly start server gateway name server
     Show pop up "Configuration siebel succesful"
2) Configuration Enterprise Server
     Entered name account authentication gateway server name = SADMIN
     Entered passoword account authentication gateway server name = SADMIN
     Entered name host gateway server name = VDIMTNSIEBEL01 (name my machine)
     Entered port TCP/IP gateway server name = 2320
     show pop up error : "Unable to connect gatawey server name"
I can not find the log file in order to understand the issue.
When I try to connect to the gateway from the browser with the url
vdimtnsiebel01:2320 I get this screen mode:
???@??????? ?????????? ????????QÈ ??? ??????????? ??? ??? ? ?h????
and writes this log in the file "C:\siebel\8.1.1.0.0\ses\gtwysrvr\log\NameSrvr.log
SisnapiLayerLog Error 1 0000001151c810a0:0 2013-06-25 10:11:27   4980: [SISNAPI]: Rx msg len=0 peer=VDIMTNSIEBEL01.ISCVDI.LOCAL avail=325 Hello expected session=13
474554202F66617669636F6E2E69636F
20485454502F312E310D0A486F73743A
207664696D746E73696562656C30313A
323332300D0A557365722D4167656E74
3A204D6F7A696C6C612F352E30202857
696E646F7773204E5420362E313B2057
4F5736343B2072763A32312E30292047
65636B6F2F3230313030313031204669

Hi,
Please clarify me the following.
You specified the login name as 'SADMIN'. Is this the login id, that you used for your Operating System? "Entered name account authentication gateway server name" expects you to enter the NT login, not the DB login.
You may also expected to specify your network name, if your login id is specific to a network. e.g Oracle\Rajkumar assuming that Oracle is your network and Rajkumar is the user name.
You may not expected to have the DSN created, as Gateway may not be interested in knowing which DB you are connected to. And you neither enter the 'DB name' anywhere in the 'Gateway Server Configuration', if my understanding is right.
Please confirm.
Below pages are for reference (not directly relevant to your question):
http://docs.oracle.com/cd/B40099_02/books/SiebInstWIN/SiebInstCOM_Prep18.html
Bookshelf v8.0: Requirements for Siebel Gateway Name Server Installation and Configuration
Thanks.
Regards,
Rajkumar Raju

Adobe Connect Enterprise Server 6 doesn't work on Firefox and Chrome

Hi everyone, we are using adobe connect enterprise server 6 recently the layout on Chrome and Firefox looks horrible but it works fine on IE, i have attach a photo of how it look on Firefox, any suggestion what the problem might be, thanks in advance.
When we get this when we login:
function showContentWithNav(url, pres, session, cw, ch, noScale, scrollbar, toolbar, status, location, target) {
        if (target == undefined)
            target = "";
no need for adding session in URL. could be misused or mistakenly sent by user to others.
and then used to access to webapp by someone.
-- REMOVING IT   --
var w, h, l, t;
if (pres) {
w = 0.96 * screen.width;
h = 0.76 * screen.height;
l = (screen.width - w) / 2;
t = (screen.height - h) / 2;
} else if (noScale) {
w = cw;
h = ch;
l = (screen.width - w) / 2;
t = (screen.height - h) / 2;
} else {
if (cw > 0 && ch > 0) {
if (cw <= screen.width) {
w = cw;
h = w * ch /cw;
if (h > screen.height) {
h = screen.height;
w = h * cw / ch;
} else {
w = 0.4 * screen.width;
h = 0.3 * screen.height;
l = (screen.width - w) / 2;
t = (screen.height - h) / 2;
var options = "toolbar=" + toolbar + ",status=" + status + ",location=" + location + ",resizable=1,left=" + l + ",top=" + t + ",width=" + w + ",height=" + h;
if (scrollbar==false)
options += ",scrollbars=no";
else
options += ",scrollbars=yes";
var win = open(url, target, options);
     * Default showContent window, which displays popup w/ no navigation.
    function showContent(url, pres, session, cw, ch, noScale, scrollbar, target) {
      var toolbar = 0;
var status = 0;
var location = 0;
showContentWithNav(url, pres, session, cw, ch, noScale, scrollbar, toolbar, status, location, target);

I opened a new Flex project and then tried again. I finally found that it's not a problem of flash but div rendering.
It seems Firefox and Chorme don't pass mouse wheel event automatically if div layout is set to "absolute".
Although this is not a Flex issue, any idea of passing that event to flash will be appriciated. I haven't find a way to do it so far :-(
What I'm doing is editing the "index.tamplate.html" to test. I added a div to contain the div of "flashContent" and set it's style to:
    position: absolute;
    top: 150px; left: 150px;
    height: 250px; width: 250px;
    z-index: 10;
Another div's z-index is set to 1 to test the overlay effect.
The reason why I added a div to contain the original div of flash, is I cannot figure out a way to effectively edit the CSS of the "flashContent" div.
Any help will be thankful!!

Connecting Bold 9700 (T-Mobile) with the Enterprise Server

I just got Bold 9700 and was able to activate all my private accounts.
However, for work E-mail I need to activate it through the Enterprise Server.
When I followed the instructions of my company's IT Department to go to Settings/Options/Advanced Options but can not find Enterprise Server Access.
Please HELP !!
Solved!
Go to Solution.

Many thanks for your explanation. It is clear now. I also hope that others, who may have also been in doubt regarding this issue, will find this string beneficial, which is indeed the purpose of these forums.
Cheers

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

How to Configure Remote Connections To SQL Server 2008 R2 Express

Post written June 10, 2010 and pertains to:
SQL Server 2008 R2 Express on both my server and local machines: SQLX_SRV,
SQLX_LOC
SQL Server 2008 R2 Management Studio on both my server and local machines:
MS_SRV, MS_LOC
Windows Server 2008 R2 Enterprise installed on a Hyper-V VPS: WS
SQL Server Configuration Manager on both my server and local machines:
CMGR_SRV, CMGR_LOC
Server Manager: SMGR
I am connecting to my hosting server via Remote Desktop Connection: RDC
I installed SQLX_SRV and MS_SRV on my hosting server and SQLX_LOC and MS_LOC on my local development machine. I am able to use MS_LOC to connect to SQLX_LOC and to use MS_SRV to connect to SQLX_SRV. However I am not able to use MS_LOC to connect
with SQLX_SRV. Here's what I have done so far:
SMGR -> Configuration -> Windows Firewall to turn off the Windows Firewall for Domain, Private and Public profiles. Obviously I'll change this later, but until I can connect I want to remove as many variables as possible.
CMGR_SRV -> SQL Server Services to confirm that both SQL Server (SQLEXPRESS) and SQL Server Browser services were running.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS to ENABLE the Shared Memory, Named Pipes, and TCP/IP protocols and DISABLE the deprecated VIA protocol.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS -> double click TCP/IP to open the TCP/IP properties dialogue. On the Protocol tab Enabled: Yes, Keep Alive: 30000, changed Listen All to No. I've tried it both
ways, but I've got six IP addresses on my server and I wanted to configure SQLEXPRESS to listen to only the first and primary IP. On the IP Addresses tab went to IPALL and cleared the TCP Dynamic Ports field and entered 1433 in the TCP Port field.
For my first and primary IP Address I made sure that Enabled was Yes, I cleared the TCP Dynamic Ports field, and entered 1433 in the TCP Port field. For all other IP Addresses Enabled was set to No and I cleared both the TCP Dynamic Ports and TCP Port
fields.
CMGR_SRV -> SQL Server Services -> SQL Server (SQLEXPRESS) right click and Restart. This of course stopped and restarted my instance of SQLX_SRV enabling the TCP/IP configuration in the previous step to take effect.
On my server, SQLX_SRV is the only instance of SQL Server running and so it's easy to hard wire it to the default port 1433.
The instance name for both SQLX_SRV and SQLX_LOC is the default "SQLEXPRESS". My server machine name is "SERVER1" on the EnglishBrains.com domain. So the proper local name (local within the context of my remote server as connected via RDC) for
my instance of SQLX_SRV would be:
SERVER1\SQLEXPRESS
Note the use of a backslash NOT a forward slash.
Of course to connect remotely from my development machine, which is not on the same domain as my hosting server, I would need to specify the domain as well, so the SQL Server name becomes:
SERVER1.EnglishBrains.com\SQLEXPRESS
I must also use SQL Server Authentication. Before I can use such a remote connection, however, there are still several configuration steps required. So on my server (connected via RDC) I used MS_SRV to connect to SQLX_SRV using SERVER1\SQLEXPRESS
for the server name and Windows Authentication. Once connected I performed the following steps:
MS_SRV -> right click the connected parent SERVER1\SQLEXPRESS instance node at the top -> Properties -> Security -> Server authentication: select "SQL Server and Windows Authentication mode". This will enable connections using either type
of authentication.
Next, leaving the Server Properties dialogue open, Connections -> check "Allow remote connections to this server" box.
Click OK to save these changes and close the Server Properties dialogue.
MS_SRV -> Security -> right click Logins and select "New Login...", the Login - New dialogue opens.
On the General page Enter a name for your new login
Select SQL Server Authorization
Enter and confirm a password
Uncheck Enforce password expiration
Select the default Database and Language
On the ServerRoles page Public will be checked, also check SysAdmin. This is probably not a good idea and I'll uncheck this as soon as I can connect to the SQLX_SRV.
On the User Mapping page select the databases you want your new Login to access and enter the Default Schema of "dbo".
At the bottom of the User Mapping page you'll see the Database Roles table. Public will be selected by default. Also select db_Owner. Again this is probably not a good idea, and I'll refine this once I can connect.
On the Status page confirm that "Grant" is checked under "Permission to connect to database engine" and "Enable" is checked under "Login".
Click OK to save all changes and close the Login - New dialogue.
With these steps completed you should now be able to use MS_SRV to connect to SQLX_SRV using SQL Server Authentication by supplying the name and password for your new Login. I tried this and it worked fine. Next I tried to use this same login
remotely, that is I went to my local development machine and used MS_LOC to try and connect to SQLX_SRV by using
SERVER1.EnglishBrains.com\SQLEXPRESS
and opting for SQL Server Authentication and supplying the name and password of my new login.
THIS DID NOT WORK?? Instead I get the following error message:
Cannot connect to SERVER1.EnglishBrains.com\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click:
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1
If you follow the suggested help link, you are told:
The SQL Server client cannot connect to the server. This error could be caused by one of the following reasons:
A specified SQL Server instance name is not valid.
The TCP, or named pipes protocols are not enabled.
The firewall on the server has refused the connection.
The SQL Server Browser service (sqlbrowser) is not started.
WRONG on all 4 counts! The instance name IS valid. Both TCP/IP and Named Pipes protocols are enabled. The firewall has been shut down, so it is not relevant. Finally the SQL Server Browser IS started.
The next thing I tried was to circumvent discovery by the SQL Browser service by using the following syntax to specify the IP address and port directly when specifying the SQL Server name.
tcp:68.71.134.186,1433
Using this in the Server Name field I was able to use MS_SRV to successfully connect to SQLX_SRV (using SQL Server Authentication of course) with or without the SQL Browser service running.
However when I tried to connect from MS_LOC to SQLX_SRV using this same login (WITH SQL Browser service running just for good measure) it does not work?? I get the following error message:
Cannot connect to tcp:68.71.134.186,1433.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
If you follow the help link you are told:
"The SQL Server client cannot connect to the server. This error could occur because either the firewall on the server has refused the connection or the server is not configured to accept remote connections."
However, the firewall has been shut down and the server HAS been configured to accept remote connections!
I confirmed that i could indeed Ping to 68.71.134.186 and running NetStat -a |find /i "listening" on the server shows that the server is indeed listening at 68.71.134.186 Port 1433 -- which is why I was able to connect to SQLX_SRV using MS_SRV with
tcp:68.71.134.186,1433 .
IN SUMMARY: Even though I can connect to my SQLEXPRESS instance multiple ways from the server itself, I cannot connect remotely from my development machine!
If anyone can help me figure out why I would be very, very grateful!

My two cents to help you out on c# code example to configure the remote sql server express.
Hope it helps. It works, but you have to be extra carefull to read it all and setup the server configuration and netsh commands; also the port fowarding on the router.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data.SqlClient;
namespace sqlremoteconnection
class Program
static void Main(string[] args)
// this is the local sql server connection
// 192.168.1.101\SQLEXPRESS
// now, the configuration for remote access:
// activate SQL SERVER BROWSER - set it to start "automatic"; then START UP
// SQL Server Configuration Manager
// --> SQL SERVER BROWSER -> properties -> Service -> Start Mode -> automatic -> apply
// --> Log On -> Start -> Ok
            // netsh firewall set portopening protocol = TCP port = 1433 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh firewall set portopening protocol = UDP port = 1434 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = tcp action = allow localport = 1433 remoteip = any profile = PUBLIC
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = udp action = allow localport = 1434 remoteip = any profile = PUBLIC
// VERY IMPORTANT FOR REMOTE ACCESS: you have to add the rules on port fowarding
// on the router!!!
// TCP: 1433
// UDP: 1434
// or just a personal port like TCP 31433/UDP 31434
// read carefully the netsh commands above
// server name: 123.132.24.177\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,1433 <<-- regular port
// server name: anyurl.myftp.org\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,31433 <<-- WOW different PORT here!!!
SqlConnection myConnection = new SqlConnection(
"user id=sa;" +
"password=password_goes_here!;" +
"server=anyurl.myftp.org\\SQLEXPRESS,31433;" +
//"Trusted_Connection=no;" +
"database=database_name_here; " +
"connection timeout=30");
try
myConnection.Open();
catch (Exception e)
Console.WriteLine(e.ToString());
try
SqlDataReader myReader = null;
SqlCommand myCommand = new SqlCommand("select * from mytable", myConnection);
myReader = myCommand.ExecuteReader();
while (myReader.Read())
Console.WriteLine(myReader["tab01_name"].ToString());
Console.WriteLine(myReader["tab01_age"].ToString());
catch (Exception e)
Console.WriteLine(e.ToString());
try
myConnection.Close();
catch (Exception e)
Console.WriteLine(e.ToString());
Adelino Araujo

There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

Hello,
I have an issue with connecting client SB1H on Windows, the scenario is as follows:
1.- Server:
     Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
     NDB and Server are review 69 SP06
2.- Client:
     Windows 8 Pro Virtual Machine on Microsoft Hyper-V
     SB1H PL 11 version 32bits
     SAP HANA Studio version 1.0.60
When I run SB1H the following message appears:
There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
Any idea what could be the solution?

Hi,
Please check SAP notes:
   1993392 - Server components setup wizard: New default values for certificates and single sign-on option
1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
Thanks & Regards,
Nagarajan

How can I use SSO from BI to BO Enterprise Server

Hello,
I have installed a BO Enterprise Server SR3 and I want to connect it to an SAP BI 7.0.
I did the configuration of the Installation Guide "BusinessObjects XI Integration für SAP Solutions-Installationshandbuch" chapter 6 except of the last two. I do not want to use a second server.
The problem is that a connection test of the RFC-Connection in SAP BI will cause the following error:
SNC disabled fo conversation ..., tp=BO_Publischer_T22 /CPIC-CALL:'ThS
ERROR: SNC disabled fo conversation ..., tp=BO_Publischer_T22
LOCATION: CPIC (TCP/IP) on host AGES2901
I have started the Publisher and the Server Intelligence Agent with a domainuser and this user can call the sapgenpse without being in the path of the program.
If I test the system in transaction /crystal/rptadmin I first have to logon to the SAP WebAS and then to the BO Enterprise (via SAP Authentication).
Has anyone configured the connection from BI to BO this way?
Best regards
Andreas

Hi all,
I am having the same problem, I am not able to open a Crystal Report without being propmted for user and password. This happens from
SAP GUI and also from an iView within the SAP Portal.
Another thing is that I have defined a Repository in the SAP Portal, I can see the folders and reports, but when I try to open a report it gives the follwing error
500
Internal error in the server
The url is trying to access is the follwing:
http://sap470:51000/irj/go/km/docs/boerepo/2128/2590
2128 is the folder id and 2590 is the report id, I am not sure if the url is supposed to be like that.
Any idea?
Thanks

Unable to connect to SQL Server 2008 from OBIEE 11G(on 64 bit Linux box)

We are unable to connect to connect to SQL Server 2008 from OBIEE 11G which is on 64 bit Red Hat Enterprise Linux.
Infrastructure: OBIEE 11.1.1.5 64bit, on 64 bit Red Hat Linux Enterprise Linux 5.6 , MS SQL Server 2008 on 64 bit Microsoft Windows Server
Issue Description: Unable to connect to SQL Server 2008 from OBIEE11G RPD
Details: We are unable to connect to SQL Server 2008 from OBIEE which is on a 64 bit Linux box. We created the ODBC connection on Linux box to the SQL server. Whenever we try to import metadata it throws an error that says ‘Connection Failed’.
Here are the steps we followed to setup the ODBC connection on Linux box.
1) We updated the user.sh file with the LD_LIBRARY_PATH and LD_LIBRARY_PATH_64 values that point to $ORACLE_HOME/bifoundation/odbc/lib
This is where we found the driver for SQL server SEmsss23.so.
2) We updated the odbc.ini file with the entry for SQL server with the connection details
SI_SQL_Server_DEV = SQL Server
[SI_SQL_Server_DEV]
Driver=/u001_OAS/Oracle/Middleware/Oracle_BI1/bifoundation/odbc/lib/SEmsss23.so
Description=DataDirect 5.1 SQL Server Wire Protocol
Address=10.230.216.52,54970
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SVBDW_NEW
LoadBalancing=0
LogonID=SIDatavalidation
Password=~~~Password123
QuoteID=No
ReportCodePageConversionErrors=0
3) We updated the IDENTIFIER_QUOTE_CHAR with single quotes instead of double quotes in the DB features of the RPD
4) We updated the bash_profile file to point the ODBCINI variable to the path where the OBIEE odbc.ini file is present.
Export ODBCINI=/u001_OAS/Oracle/Middleware/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/odbc.ini
The error in nqsserver.log file says “[nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified.”

Hi,
Make sure SQL Configuration Manager make sure the TCP/IP enabled. please try below method
Method 1
Re Create a new ODBC & Oracle Bi Server DSN Configuration test it and use it in the connection pools.
define your ODBC data source in your server where the BI Server is installed. Check your DB connections in your physical layer and make they are defined on your BI Server as well.
Method 2:
try using the complete TNS in below format in the datasource name section:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST =DB IP)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ) and provide the credentials.
Method 3:
To use the OCI call interface you need to have oracle client DB to be installed so that you can establish a connection using that DB credentials and connect to the remote dB and then import the tables.....this is the rule of thumb.
hope helps you.
Thanks
Deva

Issue with Deploying and calling a BPEL process on ALBPM enterprise server

Hi,
I am trying to put in place a POC using Aqualogic BEA products (using ALBPM 5.7, Enterprise Server 5.7, ALSB 2.6, Weblogic App server 9.2). My goal is to put in place a simple BPEL process (using ALBPM) which would call a webservice exposed through ALSB. This BPEL process is initiated by a wrapper BPMN process calling the BPEL process through fuego code.
Though we are able to do the above on a standalone ALBPM studio, When we try to deploy the exported BPM project on the enterprise server and access it through the hiper workspace portal we are getting the following error in the BPM Process Administrator Log of the Engine.
A component failed while executing activity '/Process#Default-1.0/Global' (BP-method Global). Details: The task could not be successfully executed. Reason: 'fuego.connector.ConnectorException: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. '. Caused by: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. fuego.lang.ComponentExecutionException: The task could not be successfully executed. Reason: 'fuego.connector.ConnectorException: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. '. at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:916) at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1068) at fuego.server.execution.TaskExecution.invoke(TaskExecution.java:389) at fuego.server.execution.GlobalTaskExecution.invoke(GlobalTaskExecution.java:106) at fuego.server.execution.TaskExecution.executeCIL(TaskExecution.java:481) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:655) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:616) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:442) at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:164) at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:142) at fuego.server.execution.Global.execute(Global.java:81) at fuego.server.AbstractProcessBean$38.execute(AbstractProcessBean.java:2496) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:290) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:462) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:540) at fuego.transaction.TransactionAction.start(TransactionAction.java:213) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:117) at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66) at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2491) at fuego.ejbengine.EJBProcessControlAdapter.runGlobalActivity(EJBProcessControlAdapter.java:386) at fuego.ejbengine.EJBProcessControlAdapter_hu750h_EOImpl.runGlobalActivity(EJBProcessControlAdapter_hu750h_EOImpl.java:2877) at fuego.ejbengine.EJBProcessControlAdapter_hu750h_EOImpl_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174) at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:335) at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252) at fuego.ejbengine.EJBProcessControlAdapter_hu750h_EOImpl_921_WLStub.runGlobalActivity(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:48) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:111) at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:66) at $Proxy77.runGlobalActivity(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1478) at fuego.lang.JavaObject.invoke(JavaObject.java:185) at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:200) at fuego.portal.wapi.InteractiveExecution.process(InteractiveExecution.java:157) at fuego.portal.wapi.WebInteractiveExecution.process(WebInteractiveExecution.java:54) at fuego.portal.wapi.InteractiveExecution.process(InteractiveExecution.java:200) at fuego.portal.servlet.ExecutionDispatcher.runGlobalActivity(ExecutionDispatcher.java:659) at fuego.portal.servlet.ExecutionDispatcher.processRequest(ExecutionDispatcher.java:144) at fuego.portal.servlet.ExecutionDispatcher.doPost(ExecutionDispatcher.java:105) at javax.servlet.http.HttpServlet.service(HttpServlet.java:763) at fuego.portal.servlet.AuthenticatedWamServlet.service(AuthenticatedWamServlet.java:1049) at fuego.portal.servlet.SingleThreadPerSession.service(SingleThreadPerSession.java:73) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at fuego.servlet.multipart.BaseMultipartFilter.doFilter(BaseMultipartFilter.java:57) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3243) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2003) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1909) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:181) Caused by: fuego.connector.ConnectorException: The configuration name [ProcessService] and type [Web Service] is not defined. Detail:The connector must be configured in the appropiate context. at fuego.connector.ConnectorException.connectorNotFound(ConnectorException.java:55) at fuego.connector.ConnectorService.getConnectorInterface(ConnectorService.java:586) at fuego.connector.ConnectorTransaction.getConnectorInterface(ConnectorTransaction.java:618) at fuego.connector.ConnectorTransaction.getResource(ConnectorTransaction.java:254) at fuego.soaptype.WSConfiguration.getInstance(WSConfiguration.java:55) at fuego.soaptype.Endpoint.create(Endpoint.java:42) at fuego.soaptype.WebServiceInstantiator.instantiate(WebServiceInstantiator.java:58) at fuego.component.Component.instantiateDynamic(Component.java:123) at CapGemini.Process.Default_1_0.Instance.CIL_callBPEL(Instance.java:241) at CapGemini.Process.Default_1_0.Instance.CIL_callBPEL(Instance.java:307) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:907) ... 64 more
Two things here that might help to understand the problem better :
1) As I understand the error is due to some issue while calling the BPEL process from the Fuego code.
The Fuego code which call's the BPEL from the BPMN process is as follows :
helloResponse as String = "someoutput"
helloRequest as String = "someinput"
sessionid as String
// Starting a Session.
// In case you are testing this in the Studio,
// the password must be the same as the user
startSession BPELWSDL.ProcessServiceListenerWSDL.ProcessService
using user = "test",
password = "test"
returning sessionid = result
// createTest is the name of the operation
// in the exposed process.
// In this case the process "ExposedProcess"
// has a web service operation
// called "createTest" that is a "Process Creation" type
// and uses the Begin activity's argument set
callHello BPELWSDL.ProcessServiceListenerWSDL.ProcessService
using sessionId = sessionid,
arg1 = helloRequest
returning helloResponse = result
// Closing the session
discardSession BPELWSDL.ProcessServiceListenerWSDL.ProcessService
using sessionId = sessionid
display "The BPEL's response : " + helloResponse
2) Further, I had catalogued the BPEL's wsdl to the location http://localhost:9000/fuegoServices/ws/ProcessServiceListener?WSDL while running the same in Studio, but while deploying on the enterprise server , I made this point to http://localhost:7001/fuegoServices/ws/ProcessServiceListener?WSDL Is this correct ?
Any thought on this issue would be appreciated.
Regards
Deepak

Hi Deepak,
We are also facing a similar problem, while accessing an external webservice from a BPM process.
Were you able to resolve this issue.
If so, Could you please let us know the procedure that you followed to resolve the issue.
Thanks in Advance,
Krishnaveni.

Critical Error in the Enterprise Server

I am having a critical error in my process in the Enterprise Server.. It works fine inside Studio.. The following is the error:-
Error while persisting the transaction data: 'An error occurred while accesing the database. Detail:SQL statement: 'unknown' ' Details: An error occurred while accesing the database. Detail:SQL statement: 'unknown' Caused by: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 32 seconds BEA1-058A537B20F95C8E0272 at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1418) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1330) at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:189) at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:64) at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:92)
It also complains the following :-
Process '/TestProcess#Default-1.0@Test' was not found in the Directory Service: 'oracle'
Detail:Verify that the Directory Service is working properly and that the process is correctly deployed.
Consider that Oracle J2EE Engines require referral configuration to communicate.
But the process has been completely deployed..
What could be the possible problem?
Any answer anybody?
This is urgent..

It seems that some execution is taking longer than 30 seconds (default JTA timeout)
You should increase the WLS JTA Timeout.
Hope this helps,
Ariel

"No connectivity with the server" error for one document but not the other, in the same document library

We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?

It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

EAS server error: Could not connect to administration Server

Hi,
I have installed Hyperion suite in Windows server 2008 R2. It was working fine but now when i tried to login in to the EAS console, I am getting the following error:
"Server Error: Could not connect to administration server".
I tried accessing the same through the web URL and I found "404 error - file or directory not found".
I verified all my services are up and running fine. I am able to connect to the essbase sever through Excel as well as planning.
The log retireved from the HyS9eas-sysout.log file is below:
<Sep 11, 2013 7:06:56 AM JST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 11, 2013 7:06:57 AM JST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 11, 2013 7:06:58 AM JST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Sep 11, 2013 7:07:04 AM JST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Sep 11, 2013 7:07:15 AM JST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<Sep 11, 2013 7:07:15 AM JST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Sep 11, 2013 7:07:15 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Sep 11, 2013 7:07:15 AM JST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00410. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>
<Sep 11, 2013 7:07:48 AM JST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Sep 11, 2013 7:07:56 AM JST> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\registry_update.xml file
EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
Template for EAS#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar
Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM Calcmgr, Oracle EPM Planning libraries, Oracle EPM EAS libraries, Oracle EPM Misc libraries, Oracle EPM Xerces libraries]
BPMUI shared webapp not referenced from EAS#11.1.2.0
Application name: EAS#11.1.2.0
Application source: eas.ear
Server name: EssbaseAdminServices0
Server port: 10080
Server SSL port: 10083
Application context: eas
Registry product type: ESSBASE_PRODUCT
Registry physical web application type: ADMIN_SERVICES_WEB_APP
weblogic.Name property is 'EssbaseAdminServices0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for EAS#11.1.2.0
EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
<Sep 11, 2013 7:09:06 AM JST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EAS [Version=11.1.2.0]' due to error java.lang.NullPointerException.
java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
>
<Sep 11, 2013 7:09:06 AM JST> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
<Sep 11, 2013 7:09:22 AM JST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Sep 11, 2013 7:09:48 AM JST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Fri Mar 22 05:12:27 JST 2002,
               To: Wed Mar 23 05:12:27 JST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.14.126.11:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.14.126.11:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.14.34.75:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.14.218.238:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.14.218.238:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 10.14.34.75:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <Server> <BEA-002611> <Hostname "SJ015040", maps to multiple IP addresses: 10.14.126.11, 10.14.34.75, 10.14.218.238, 0:0:0:0:0:0:0:1>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
HyS9eas-syserr.log is empty and I dont find anyother details from the other log files.
Kindly help me out in solving this issue.
Thanks in advance.
Regards,
Balaji P

Hi John,
Sorry for replying late.
I ran the EPM diagnostic and found EAS & APS application are failed. So as you mentioned, i tried re-deployment through EPM configurator.
But Re-configuration fails with error "An unexpected error occurred and the application will have to shut down" .
When i looked in to the Config tool.log,I got the following messages.
[2013-09-17T18:17:04.635+09:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Parsing server FinancialReporting0 on port 8200 from registry
[2013-09-17T18:17:04.827+09:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Unexpected error:[[
java.lang.NullPointerException
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.<init>(UIPortUtil.java:83)
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.getInstance(UIPortUtil.java:53)
at com.hyperion.config.wizard.DeploymentField.getAppServerDeploymentData(DeploymentField.java:235)
at com.hyperion.config.wizard.DeploymentField.<init>(DeploymentField.java:56)
at com.hyperion.config.wizard.impl.DeploymentForm.<init>(DeploymentForm.java:57)
at com.hyperion.config.wizard.impl.DeploymentState.initializeBeforeShowOnNext(DeploymentState.java:56)
at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:522)
at java.lang.Thread.run(Thread.java:619)
Since it is similare to the Oracle konwledge base article - (Doc ID 1570293.1), I tried adding the shared service domain to the Windows host file. But i am still recieveing the same error message as above.
Appreciates your help.
Thanks & Regards,
Balaji P

Oracle Client 11g R2 in Windows 7 connecting a RAC server

I have the following setup in my laptop
Windows 7
Oracle Client 11g R2
I'm trying to connect "SQL plus" to a load balanced server (RAC) configured as below
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for HPUX: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
The problem is, the connection creation is not consistent. It is throwing the following error randomly.
ORA-12545: Connect failed because target host or object does not exist
I'm able connect to another server (not RAC) without any issues. Even TOAD is giving the same error. After few tries, it works.
Anyone facing the same problem, got any solution???
Thanks
Edited by: user3918865 on Oct 7, 2010 4:14 AM

Bruno Palma wrote:
Hi all.
I've done all the checklists suggested but I'm still getting the error. The problem is not with the network and the servers cos I'm working in a Company and when I had Windows XP SP 3 and Oracle Client 10gR2 all was working fine. I'm with Windows 7 Professional 64-bit now. I'm almost sure the problem is with Windows 7 x Oracle Client but it's hard to figure out what's going on. Does anyone have idea what could it be ??I would generate a client side sqlnet trace, then go on a fishing expedition. There's a lot of dense stuff in a full trace, but if you don't panic and just try to make sense of what you can, you'll probably flush it out.
To enable the trace, go to your sqlnet.ora file and add these lines:
TRACE_FILE_CLIENT=clientsqlnet.trc
TRACE_DIRECTORY_CLIENT=C:\app\oracle\product\11.2.0\client_1\network\trace
#TRACE_LEVEL_CLIENT=off
#TRACE_LEVEL_CLIENT=user
#TRACE_LEVEL_CLIENT=admin
TRACE_LEVEL_CLIENT=support
DIAG_ADR_ENABLED = off

PAPI connection to enterprise server

Similar Messages

Maybe you are looking for