Parameterized Message Mapping (RFCLookup) test in ESB message behaviour

Hi Gurus,
I am using parameterized message mapping using RFCLookup function
In the TEST tab of the mapping, I've provided my test xml instance message and inputted the Message Mapping Parameter (MMP) value with the RFC Receiver Communication Channel I am using,
looking at the Trace level in the editor, the source field value was put to the RFC as the import parameter, but the mapping fails with error that the RFC returned my defined exception (no POnumber available for MaterialNumber) --> which is not the expected result because in the ERP backend there is an existing PO for the material. I tested the RFC in the backend ERP itself and it is performing ok, with a PO number returned for the material (testing in SE37)
I checked on the Comm Channel and my message is being passed to the RFC adapter, but up to this point only:
RfcAdapter received a synchronous message. Trying to send sRFC for Z_RFC_NAME.
RfcAdapter received a synchronous message. Trying to send sRFC for PIREPUSER.
I have created the Binding for the Operation Mapping.
Would any of you have an idea on what is missing or what is wrong?
P.S. my RFC has a defined exception in it, but currently I am not using it in the RFCLookup mapping (unchecked "Use Exception" checkbox)

Hi All,
Solved the issue by passing the complete length of input parameter as defined in my RFC, e.g. input param in RFC is TYPE to a 12 char field, and the input parameter value being passed by the IDoc is only 6 chars.
In this case i used formatNumber function to put leading zeroes to complete the input parameter length
sourceField -->formatNumber --> RFCLookup --> targetField
Weird behaviour though is that even if my message is successfully received in the receiving system, the RFC CommChannel that my RFCLookup is using is still only showing this:
2010-12-01 23:14:32 Information RfcAdapter received a synchronous message. Trying to send sRFC for Z_FM_NAME.
2010-12-01 23:14:32 Information RfcAdapter received a synchronous message. Trying to send sRFC for J2EE_GUEST.
Why isn't the whole request response of the RFC captured by the RFC adapter? (e.g. MDT has status DLVG, DLV...)

Similar Messages

Synchronous message mapping - access to originating request message?

Say you have a synchronous message - like a SOAP web service request - and you map it to an RFC call, is there any way for the message mapping from the RFC response message to the SOAP response message to access fields from the original SOAP request message? Or even just a temporary storage area that I could store values from the originating request message?

Hi Jonathon!
First of all, why not access the original soap request message inside the RFC..you will be receiving this data in your RFC...is the RFC is standard, maybe you can make a wrapper with a Z RFC of your own to store the original data and use it later to build the RFC response.
Another idea: you could call a RFC via JCO inside a UDF in mapping.. this RFC could write some data in XI business system during the request mapping and another call to a "reading" RFC could read that data in the response mapping.
Other idea: use BPM, you can use containers to store the request SOAP message, call synchronously the RFC and then use a transform step (mapping) to use the original request SOAP message and the RFC response message to "merge"/build the response for the SOAP.
Regards,
Matias.
PD: please give points if useful.

Missing node in Message Mapping when test mapping??

Experts,
I have the following Mapping Structures:
Sender:
<Recordset> 1-1
   <Records> 1:unbounded
        <field1>1:1
        <field2>1:1
Receiver:
<Recordset> 1-1
    <Header> 1-1
     <Records> 0-unbounded
           <field1>
           < field2>
     <Trailer> 1-1
Mapping is completed for all fields here.But one thing I notice is on Receiver side : all nodes are Green exept Records - it is Gray with some red smal dot in the gray..
1.Question: What this means?Shouldn't all nodes turn green after mapping is done??
2.When click on TEST on Message MApping I dont even see the Receiver Records node appearing on right(receiver side) But I was able to see Header and Trailer...Why the Records is missing??
On the other hand the result from the test is successfull which is even more confusing ,How come it can be succesful since Records is not there...
I can provide screenshots if needed for more clarity ..Any help is appreciated asap..Thanks much to all!
J...

Hi John,
   It is very simple and there is no complexity with this problem.
<b> 1.Question: What this means?Shouldn't all nodes turn green after mapping is done??</b>
        If you mapped the source field to the correspoding target field..all the target fields get turn to green color. If you didn't mapp any target field that filed should appear with gray color..comming to the small circle in the recordset field...it is indicates that ..that field is "Unbounded".
   For resolving the above issue...do the mapping like this.
   <Recordset>---><Recordset>
   <Records>-------><Records>
   <field1>----><field1>
   <field2>-----> <field2>1
Keep the empty constant value for the target field Header...
   empty constatnt---->Header.
So once you done this check the mappping it will execute fine and even you able to see the recods node in the target structure.
Please let me know if you have any queries...!
Thanks and Regards,
Chandu.

Message Mapping via Test tab

Hi All
I am trying to send a message via the Test tab of the integration server.I have entered all the details like sender and receiver service and sender interface and namespace. The scenario is JDBC to file. I am using EO as qualilty of effort .The scenario is asynchronous .Once i test the payload in message mapping it gives me the correct output values. But when the same payload I paste it and send via the test tab it does not go thru. I mean sometimes I get the same message at both sender and receiver.And other times it goes into error "Split mapping created no messages " .Can anyone please help me on this as to what might be the problem.
We have used enhanced interface determination in this.Is it due to this????
The payload appears like this.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:MT_TEST xmlns:ns1="http://testinterface.com">
         <row>
            <DESCRIPTION/>
            <ITEM_NAME/>
            <CREATION_DATE/>
         </row>
      </ns1:MT_TEST>
   </ns0:Message1>
</ns0:Messages>

<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_TEST xmlns:ns1="http://testinterface.com">
<row>
<DESCRIPTION/>
<ITEM_NAME/>
<CREATION_DATE/>
</row>
</ns1:MT_TEST>
Only send the above structure as payload....do not include the other tags....they cause the error
Regards,
Abhishek.

Regarding nodes shown in red colour in message mapping under test (tab)

hi all.
i just want to confrom one thing.
i just created a file to rfc scenario and when i was tested and look in sxmb_moni its showing like the message was sucess but when i ltested in message mapping in design there were some nodes in sender Message type which were displayed in red colour.
and when i look in runtime workbench the message is showing like system error.
so can you guys tell me what could be the reason for this.
waiting for your response.
bye.
regards.
seeta ram.

hi rinku .
i think you havent understand my problem.
here the message in moni was showing as succes but when i tested the same message which was in moni in message mapping (design) there were some nodes which were in red colour and these nodes are not populated to reciever message type .but it was in sxmb_moni with all the nodes .
what could be the reason for this.
can u tell me fast and i case if u still havent understand the Q u can ask me.
waiting for your response.
bye.
regards.
seeta ram.

Message-Mapping: difference test in IR and runtime

Hi everybody,
I got a very strage behavior.
I got an element name CONTENT.
When I test my mapping in IR element CONTENT will be filled
During runtime the element CONTENT is NOT filled and the element is not generated!
For testing I use exactly the same payload as produced is runtime.
To make sure that there are not problems with cache, I manipulate other target field to see that the correct version is processed.
Any ideas?
Regards Mario

Hi,
for everybody:
I think I got the problem.
As I read dynamic attributes during runtime the behavior test <-> runtime was different.
Regards Mario

How to use result of message mapping as source to another message mapping

Hi.
I need to map iDoc to MT_A (MessageType) using MessageMapping.
And then using the result of the above mapping, map MT_A to MT_B using JavaMapping.
Can I do this all at once in my scenario or what is the best way to do this?
Regards,
Hjortur

Hi,
chk this:
/people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
Ur flow will be something like this under operation mapping :
1) Graphical mapping( iDoc to MT_A)
2) Java mappinmg.(MT_A to MT_B)
Thanks
Amit

How to test message mapping in XMLSPY if two receive message types exist?

Hi gurus,
In our message mapping, we have one send message and two receive messages, the testing is ok in message mapping test tool in ESR. While in XMLSPY, it gave the error because of the reason as follows:
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
Even after we added those statments, the error was still there.
How can I resove this problem? Thanks in advance.

Hi,
In the source XML message you may find some extra tags being included.
Just remove those extra tags, then it will work fine.
For example:
If your source XML message is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<ns1:MT_FileToFile_MultiMap_Src xmlns:ns1="http://FileToFile/MultiMap">
<Input>
<Name>ab</Name>
<EmpId>123</EmpId>
</Input>
</ns1:MT_FileToFile_MultiMap_Src>
</ns0:Message1>
</ns0:Messages>
remove the extra tags and then it will look like:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FileToFile_MultiMap_Src xmlns:ns0="http://FileToFile/MultiMap">
<Input>
<Name>ab</Name>
<EmpId>123</EmpId>
</Input>
</ns0:MT_FileToFile_MultiMap_Src>
i hope this will help you,
regards,
ganesh.

Regarding Message Mapping in JDBC Scenario

Hello Experts,
I got struct up in message mapping. In message mapping we can able to see different types of Functions. So I need some clarifications on it. Functions are available like...
Conversions
Boolean
Node Functions
Constants
Date
Text
Static
Arithmetic
So please explain in simple for each functions.
Points will be rewarded.
Thank you

Hi
*Boolean*:-
And -- checks for 2condition, return a true value if both condition are satisfied
Or --checks for 2condition, return a true value if one condition is true.
Not - checks if the condition is not equal to.
Equals - Check whether 2 Boolean values are equal
NotEquals
If u2013 Returns second value if the first argument is true. otherwise returns third argument
If WithoutElse u2013 Returns value of second argument, if first argument is true.
Node Functions:-
createIf - Produces empty value if argument is true; Resultlist.SUPPRESS otherwise
removeContexts u2013 Produces plain stream of values with No context changes
replaceValue u2013 replaces value of source field to value specified in Function Properties.
Exists u2013 Returns true, if Node exists otherwise false
SplitByValue u2013 inserts context changes after event specified
collapseContexts u2013 Produces one empty string value out of each arguments context. All arguments are in one context
useOneAsMany u2013 Use First Argument as IS on same level as third argument. second argument defines when next value of first argument is used
sort u2013 sorts values in each context
sortByKey u2013 Sorts values in second queue by keys from first queue
mapwithDefault u2013 Inserts default values specified in the function properties into empty contexts
formatByExample u2013 Takes values from the first queue and inserts them in the structure of second queue.
Constants:-
Constant u2013 Generates constant value
CopyValue u2013 Takes specified value in argument stream and copies it an infinite number of times
Sender u2013 Sender System
Receiver u2013 Receiver System
Date:-
CurrentDate u2013 Return current date in specified format
DateTrans u2013 Transforms date from input format to output format
Dateafter u2013 Returns True if first date is after second otherwise false
DAteBefore - Returns True if first date is before second otherwise false
CompareDates u2013 Compares two dates
Text:-
Substring u2013 Returns substring depending upon the given parameters
Concat u2013 concatenates 2 strings inserting delimiter string parameter between them
Equals u2013 Check whether Strings are equal
indexOf2 u2013 returns the index where the second string is found for the first time in the first string
indexOf3 u2013 As with indexOf with 2 parameters, But starting search at the specified position
lastindexOf2 u2013 Returns the index where the second string is found for the last time in the first string
lastIndexOf3 u2013 As with lastIndexOf with 2 parameters starting search at the specified position
compare u2013 compares 2 strings lexicographically
replaceString u2013 Replaces each occurrence of pattern(2nd argument ) of source string(1st arg). By third string
length u2013 returns length of string
endsWith u2013 Tests whether string ends with specified suffix
startsWith2 u2013 Tests whether string starts with specified prefix
startsWith3 u2013 Tests whether string starts with specified prefix beginning at specified location
toUpperCase u2013 Converts all characters in string to upper case
trim u2013 Removes white space from both ends of string
toLowerCase u2013 Converts all characters in String to Lower case
Statistic:-
sum u2013 calculates sum of all numbers in each context
average u2013 calculates the average of all numbers in each context
count u2013 Counts number of values in each context
Index u2013 For each incoming value, this Function returns the index number of the incoming value in the context, String from the initial index and increasing by the increment defined in the parameters.
Arithmetic:-
Add u2013 add two values
Subtract u2013 subtracts second value from the first value
equalsA u2013 Returns true; If float numbers represented by argument strings are equal otherwise returns false
abs u2013 returns Absolute value of argument
sqrt u2013 Returns square root of the number
sqr u2013 Returns square of the number
sign u2013 Returns -1 if number is negative, +1 if positive, 0 if 0
neg u2013 Multiplies number to -1
1/x u2013 calculates 1/x
Power u2013 Returns value of the first argument to the power of the second argument
Less u2013 Returns true if the first number is less than the second number otherwise false
Greater - Returns true if the first number is greater than the second number otherwise false
Multiply u2013 Multiplies 2 values
Divide u2013 Divides first value by the second value
Max u2013 Returns maximum of 2 numbers
Min u2013 Returns Minimum of the 2 numbers
Ceil u2013 Returns the smallest (closest to the negative infinity) initial value that is not less than the argument and it is equal to the mathematical integer.
Floor - Returns the largest (closest to the negative infinity) initial value that is not Greater than the argument and it is equal to the mathematical integer.
Round u2013 Returns closest initial value to the argument
Counter u2013 Counts number of invocations. Initial value and increment defined by Parameters.
FormatNum u2013 Formats Number with given pattern.
Conversions:-
FixValues u2013 Creates a Local Table to perform a value Mapping
ValueMapping u2013 Define jump to Value Mapping table of Integration Directory.
Message Mapping(Node Function) Part-1
Message Mapping Simplified - Part I
Sravaya Talanki- Message Mapping(Node Function) Part-2
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Standard Functions
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/frameset.htm
Advanced mapping function(mapwithdefault,formatbyexample,sort,sortbykey)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
Hope this is useful
Saiyog
Edited by: Saiyog Gonsalves on Jul 11, 2008 1:14 PM

Activation error in message mapping

Hi,
while activating Message mapping i am getting the error like this.
how to get rid of this error?
error:
Activation of the change list canceled Check result for Message Mapping MM_XXXXXX | http://www.xyerxd.com/mm
Imported source message has invalid reference IDoc
DEBMAS.DEBMAS06 | urn:sap-com:document:sap:idoc:messages
Imported target message has invalid reference Message Type MT_Receiver | http://www.xyerxd.com/mm

hi
Hope you are using the inactive versions of message/Idoc types for mapping.
First activate the message/Idoc types used in the message mapping.
Then open the message mapping, from the menu choose refresh.
Complete the mapping and test.
Now do the activation.
rgds,
Arun

Send Alerts(e-mail) for errors in SXMB_MONI(message mapping exceptions)

Good afternoon !
        I´m configuring SAP Netweaver PI 7.0(SP13) to use Alert Framework to send Alerts when errors occurs in the interfaces processing.
        I just achieved configure to send alerts when errors ocurrs in the Adapter Framework but, I can´t configure correctly to send alerts when errors ocurred only in SXMB_MONI(for example, message mapping exception in asyncronous interface).
        I just followed the instructions at Michal Krawczyk
weblog(/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step) and, initially, this was not sufficient to start to send alert when errors occurs only on SXMB_MONI, so, I researched and found some configurations to do in CCMS(started from here: http://help.sap.com/saphelp_nw70/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/content.htm), jobs to start events collectors, etc, and after this, I could see a mail for an message mapping exception. BUT, this message, sent from CCMS to ALM, doesn´t carry out all the message parameters, like message Id, sender(service, interface), receiver(service, interface), that is very important to help to find the message with errors to be solved.
        There is somebody here that already done the Alert configuration to send messages for errors found only in SXMB_MONI(Monitor for processed XML Messages) ?
        There is a better way to achieve this ?
        Thank you for your attention,
        Wilson Rodrigo dos Santos
        SAP Netweaver XI/PI Consultant

Hi
Go through these links and follow it.
ALERTS CONFIG AND STUFF
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) u2013 UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
Thanks
Saiyog

Message Mapping error: RuntimeException in Message-Mapping transformation

Hi,
Being new to XI, I am struglling to sort out a basic mapping error. Appreciate if you could help out.
Its an File->XI->R/3 scenario.
My FCC successfully reads the File and creates an XML. However this XML is not transferred to the target XML structure which is exactly same except the root element name is different at top.
I tried various forum tips but I still am getting the error.
( When I Test the Message mapping in test mode..it seems fine, however if I copy the XML from SXMB_MONI, it then throws the above error)
I looked at the MM in text mode: below is the extract
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/SOURCE=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/SOURCE=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/DESTINATION=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/DESTINATION=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=
As seen the name space in both starts with nS0 and end of each line has '=' sign. Is that ok.
I have run out of options and dont know , whats the problem. Please help.
The target and Source XML structures are exactly same as shown below
MT_REQUEST                                 MT_REQUEST_TO_SAP
   |__MSG_HEADER                            |__MSG_HEADER
     |__SOURCE                                |__SOURCE
     |__DESTINATION                           |__DESTINATION
     |__MESSAGE_ID                            |__MESSAGE_ID
And the SXMB_MONI Trace shows the following error
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation:
Cannot produce target element /ns0:MT_REQUEST_TO_SAP.
Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at ..
Thanks
Shirin
Edited by: Shirin K on May 29, 2008 10:29 AM

Hi Prakasu,
As structure are exactly same, I have done 1:1 mapping. So all the fields in target structure are mapped, so no field has beeen left.
In this structure, I do not have any 1:n relation. So 1:1 mapping should be fine.
Apart from this could teher be any other reason.
Regards
Rajiv

Message Mapping Transformation error in E-filing GB

Hi All,
I am running the E-filing GB interface and at the Message mapping I get Process Error:
The source structure, target structure, or a function library has been changed or could not be found in the Enterprise Services Repository. The mapping definition contains elements or attributes that do not exist in the changed structure, or functions that were changed in a function library. The relevant entries will be deleted.
Node with path /ns0:GovTalkMessage/ns0:Body/ns1:IRenvelope/ns1:EndOfYearReturn/ns1:P14/ns1:NICs/ns1:Earn/ns1:ETtoUEL not found in source structure Node with path /ns0:GovTalkMessage/ns0:Body/ns1:IRenvelope/ns1:EndOfYearReturn/ns1:P14/ns1:NICs/ns1:Earn/ns1:ETtoUEL/@Currency not found in source structure
I have already tested a few steps like:
1. We have applied the latest patch to E-filing GB. This did not help solve the problem.
2. Tested the Message Mapping. No error at Message Mapping.
Is there anything we are missing out on?? Please suggest.
Thanks,
Shwetha

Hi,
for me its looks cache issue,did you changed structure of source and target ?? check your function liabraris code,it is valid or not.
Regards,
Raj

XI 2.0 Message Mapping Activation Problem

Hi All,
When I attempt to activate a message mapping, I receive the following message:
Activation of change list cancelled
Check Result for Object Message Mapping ZHRMD_A05toEAI | http://com.sl.xi:
*Starting Compilation
*Error while Compiling
This is a rather large IDoc, so I'm wondering if it's a memory problem. Do you know where I can "Check Result"? The actual mapping is very routine, so I don't think it's a syntax problem.
Any help is greatly appreciated!
Kind Regards,
Jeff
Message was edited by: Jeff Kocur

It does appear to be a resource issue. Following your suggestion, I ran a test and received this message:
Messages:C:\jdk1.3.1_11\bin\javac -encoding UTF8 -classpath .;.\system-lib\boot.jar;.\system-lib\jaas.jar -extdirs .\additional-lib;.\services\deploy\work\applications\ExchangeRepository -d C:\WINNT\TEMP\12_9_21_22_10_2004 C:\WINNT\TEMP\12_9_21_22_10_2004\com\sap\xi\tf\_ZHRMD_A05BtoEAIZHRMD_A05B_.java
The system is out of resources.
Consult the following stack trace for details.
java.lang.OutOfMemoryError
<<no stack trace available>>
Compilation error

PI 7.1 Operation mapping - Multiple message mapping - one to many issue

Dear Experts,
I am facing this issue in PI 7.1 and I beleive i did similar one in PI 7.0 successfully.
I have an operation mapping with two message mappings.
The occurence of source message of operation mapping is 1
The occurence of target message of operation mapping is 0..unbounded
Corresponding i configured two message mappings
For message mapping-1
Source message occurence = 1 and Target message occurence = 1
For message mapping-2
Source message occurence = 1 and Target message occurence = 0...unbounded
When i test message mappings individually they are working good. But when i test it in operation mapping, the operation mapping is not working..as it is not able to convert single occurence output of message mapping -1 to the second message mapping-2.
Any suggestions?
Thanks.

The message that i get when testing in operation mapping:
Runtime Exception when executing application mapping program com/sap/xi/tf/_MM_MessageMapping_1_; Details: com.sap.aii.mappingtool.tf7.IllegalInstanceException; Cannot create target element /ns0:MT_MessageMapping_1_TargetMessageType/RECORDSET. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD
My question is, has somebody mapped similar scenario in your environment? If yes, can you please provide details.
Operation mapping : 1 to 0..unbounded
Message Mapping1: 1 to 1
Message Mapping2: 1 to 0...unbounded

Parameterized Message Mapping (RFCLookup) test in ESB message behaviour

Similar Messages

Maybe you are looking for