Message-Mapping: difference test in IR and runtime

Hi everybody,
I got a very strage behavior.
I got an element name CONTENT.
When I test my mapping in IR element CONTENT will be filled
During runtime the element CONTENT is NOT filled and the element is not generated!
For testing I use exactly the same payload as produced is runtime.
To make sure that there are not problems with cache, I manipulate other target field to see that the correct version is processed.
Any ideas?
Regards Mario

Hi,
for everybody:
I think I got the problem.
As I read dynamic attributes during runtime the behavior test <-> runtime was different.
Regards Mario

Similar Messages

Differences between System.gc() and Runtime.gc() ?

differences between System.gc() and Runtime.gc() ?

None!
P.S. I have only found one reason to use System.gc(). For some obscure reason it seems that if one invokes System.gc() when a Swing application is about to be iconized it substantially reduces the delay experienced when de-iconizing the application!
Several reasons for this have been suggested but I have found none that really explain why it works but it does work!
Edited by: sabre150 on Sep 28, 2007 10:23 AM

Regarding nodes shown in red colour in message mapping under test (tab)

hi all.
i just want to confrom one thing.
i just created a file to rfc scenario and when i was tested and look in sxmb_moni its showing like the message was sucess but when i ltested in message mapping in design there were some nodes in sender Message type which were displayed in red colour.
and when i look in runtime workbench the message is showing like system error.
so can you guys tell me what could be the reason for this.
waiting for your response.
bye.
regards.
seeta ram.

hi rinku .
i think you havent understand my problem.
here the message in moni was showing as succes but when i tested the same message which was in moni in message mapping (design) there were some nodes which were in red colour and these nodes are not populated to reciever message type .but it was in sxmb_moni with all the nodes .
what could be the reason for this.
can u tell me fast and i case if u still havent understand the Q u can ask me.
waiting for your response.
bye.
regards.
seeta ram.

Missing node in Message Mapping when test mapping??

Experts,
I have the following Mapping Structures:
Sender:
<Recordset> 1-1
   <Records> 1:unbounded
        <field1>1:1
        <field2>1:1
Receiver:
<Recordset> 1-1
    <Header> 1-1
     <Records> 0-unbounded
           <field1>
           < field2>
     <Trailer> 1-1
Mapping is completed for all fields here.But one thing I notice is on Receiver side : all nodes are Green exept Records - it is Gray with some red smal dot in the gray..
1.Question: What this means?Shouldn't all nodes turn green after mapping is done??
2.When click on TEST on Message MApping I dont even see the Receiver Records node appearing on right(receiver side) But I was able to see Header and Trailer...Why the Records is missing??
On the other hand the result from the test is successfull which is even more confusing ,How come it can be succesful since Records is not there...
I can provide screenshots if needed for more clarity ..Any help is appreciated asap..Thanks much to all!
J...

Hi John,
   It is very simple and there is no complexity with this problem.
<b> 1.Question: What this means?Shouldn't all nodes turn green after mapping is done??</b>
        If you mapped the source field to the correspoding target field..all the target fields get turn to green color. If you didn't mapp any target field that filed should appear with gray color..comming to the small circle in the recordset field...it is indicates that ..that field is "Unbounded".
   For resolving the above issue...do the mapping like this.
   <Recordset>---><Recordset>
   <Records>-------><Records>
   <field1>----><field1>
   <field2>-----> <field2>1
Keep the empty constant value for the target field Header...
   empty constatnt---->Header.
So once you done this check the mappping it will execute fine and even you able to see the recods node in the target structure.
Please let me know if you have any queries...!
Thanks and Regards,
Chandu.

Message Mapping via Test tab

Hi All
I am trying to send a message via the Test tab of the integration server.I have entered all the details like sender and receiver service and sender interface and namespace. The scenario is JDBC to file. I am using EO as qualilty of effort .The scenario is asynchronous .Once i test the payload in message mapping it gives me the correct output values. But when the same payload I paste it and send via the test tab it does not go thru. I mean sometimes I get the same message at both sender and receiver.And other times it goes into error "Split mapping created no messages " .Can anyone please help me on this as to what might be the problem.
We have used enhanced interface determination in this.Is it due to this????
The payload appears like this.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:MT_TEST xmlns:ns1="http://testinterface.com">
         <row>
            <DESCRIPTION/>
            <ITEM_NAME/>
            <CREATION_DATE/>
         </row>
      </ns1:MT_TEST>
   </ns0:Message1>
</ns0:Messages>

<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_TEST xmlns:ns1="http://testinterface.com">
<row>
<DESCRIPTION/>
<ITEM_NAME/>
<CREATION_DATE/>
</row>
</ns1:MT_TEST>
Only send the above structure as payload....do not include the other tags....they cause the error
Regards,
Abhishek.

Parameterized Message Mapping (RFCLookup) test in ESB message behaviour

Hi Gurus,
I am using parameterized message mapping using RFCLookup function
In the TEST tab of the mapping, I've provided my test xml instance message and inputted the Message Mapping Parameter (MMP) value with the RFC Receiver Communication Channel I am using,
looking at the Trace level in the editor, the source field value was put to the RFC as the import parameter, but the mapping fails with error that the RFC returned my defined exception (no POnumber available for MaterialNumber) --> which is not the expected result because in the ERP backend there is an existing PO for the material. I tested the RFC in the backend ERP itself and it is performing ok, with a PO number returned for the material (testing in SE37)
I checked on the Comm Channel and my message is being passed to the RFC adapter, but up to this point only:
RfcAdapter received a synchronous message. Trying to send sRFC for Z_RFC_NAME.
RfcAdapter received a synchronous message. Trying to send sRFC for PIREPUSER.
I have created the Binding for the Operation Mapping.
Would any of you have an idea on what is missing or what is wrong?
P.S. my RFC has a defined exception in it, but currently I am not using it in the RFCLookup mapping (unchecked "Use Exception" checkbox)

Hi All,
Solved the issue by passing the complete length of input parameter as defined in my RFC, e.g. input param in RFC is TYPE to a 12 char field, and the input parameter value being passed by the IDoc is only 6 chars.
In this case i used formatNumber function to put leading zeroes to complete the input parameter length
sourceField -->formatNumber --> RFCLookup --> targetField
Weird behaviour though is that even if my message is successfully received in the receiving system, the RFC CommChannel that my RFCLookup is using is still only showing this:
2010-12-01 23:14:32 Information RfcAdapter received a synchronous message. Trying to send sRFC for Z_FM_NAME.
2010-12-01 23:14:32 Information RfcAdapter received a synchronous message. Trying to send sRFC for J2EE_GUEST.
Why isn't the whole request response of the RFC captured by the RFC adapter? (e.g. MDT has status DLVG, DLV...)

Use Message Mapping to repeat top node and split Message

I am currently using XSLT Messaging to do majority of the mapping. I have two issues that remain, I need to repeat the top node for each or its child elements and split the message.
<Sensor xmlns="namespace">
<Observation>
    <XML>Some Data</XML>
</Observation
</Sensor>
1. Can it be done in XSLT? I posted a thread asking for help on this. Where I would need to repeat the Sensor tag for each observation. If this is possible then I will able to split the messages at the HTTP adapter used for the target system.
2. Can Message Mapping be used. Using the same xsd on both source and target systems, Will sensor repeat if set to 1:n and observation set to 1:1. In source it is Sensor 1:1, Observation 1:n. If this works then I can use a BPM to shoot out individual messages using a for each.
Any help is greatly appreciated. I am fairly new to XI as this is my first major project. Thanks

Source File                                             Target File
> XI (XSLT) -
> Each observation as one file ---> Out via HTTP
Batch of all orders
Source File
<?xml version="1.0" encoding="ISO-8859-1"?>
<receipt>
<manufacturer>Manufacture Name</manufacturer>
<manufacturer_gln>999999</manufacturer_gln>
<transfer_recipt>0123456</transfer_recipt>
<prod>
    <product_GTIN>99999999999999</product_GTIN >
    <product_LOT>123456A</product_LOT >
    <production_date>20090131</production_date>
    <expire_date>20120131</expire_date>
    <carrier>
      <carrier_type>P</carrier_type>
      <carrier_barcode>001</carrier_barcode>
      <carrier_detail>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>01</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089211</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089212</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089213</carrier_barcode></carrier>
            </carrier_detail>
        </carrier>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>02</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089214</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089215</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089216</carrier_barcode></carrier>
            </carrier_detail>
        </carrier>
      </carrier_detail>
    </carrier>
    <carrier>
      <carrier_type>P</carrier_type>
      <carrier_barcode>002</carrier_barcode>
      <carrier_detail>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>03</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089217</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089218</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089219</carrier_barcode></carrier>
          </carrier_detail>
        </carrier>
        <carrier>
          <carrier_type>C</carrier_type>
          <carrier_barcode>04</carrier_barcode>
          <carrier_detail>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089220</carrier_barcode></carrier>
            <carrier><carrier_type>ITEM</carrier_type><carrier_barcode>0108699547010089221</carrier_barcode></carrier>
           </carrier_detail>
        </carrier>
      </carrier_detail>
    </carrier>
</prod>
</receipt>
Target File
<?xml version="1.0" encoding="UTF-8"?>
<pmlcore:Sensor xmlns:pmlcore="urn:autoid:specification:interchange:PMLCore:xml:schema:1" xmlns:pmluid="urn:autoid:specification:universal:Identifier:xml:schema:1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:autoid:specification:interchange:PMLCore:xml:schema:1 cases.xsd">
<pmluid:ID>GPO_AI_LU_DC</pmluid:ID>
<pmlcore:Observation>
    <pmlcore:DateTime>2008-10-13T17:53:00.265+02:00</pmlcore:DateTime>
    <pmlcore:Command>PACK</pmlcore:Command>
    <pmlcore:Tag>
      <pmluid:ID>01</pmluid:ID>
      <pmlcore:Data>
        <pmlcore:XML>
          <Memory>
            <DataField fieldName="EXPIRATION_DATE">20120131</DataField>
            <DataField fieldName="BATCH_ID">123456A</DataField>
            <DataField fieldName="ZMFG_DATE">20090131</DataField>
            <DataField fieldName="ZMFG_GLN">999999</DataField>
            <DataField fieldName="ZMANUFACTURER">Manufacture Name</DataField>
            <DataField fieldName="ZITEM_COUNT">16</DataField>
            <DataField fieldName="ZWORK_ORDER_NUMBER">0123456</DataField>
          </Memory>
        </pmlcore:XML>
      </pmlcore:Data>
    </pmlcore:Tag>
    <pmlcore:Tag>
      <pmluid:ID>0108699547010089211</pmluid:ID>
      <pmlcore:Data>
        <pmlcore:XML>
          <Memory>
            <DataField fieldName="EXPIRATION_DATE">20120131</DataField>
            <DataField fieldName="BATCH_ID">123456A</DataField>
            <DataField fieldName="ZMFG_DATE">20090131</DataField>
            <DataField fieldName="ZMFG_GLN">999999</DataField>
            <DataField fieldName="ZMANUFACTURER">Manufacture Name</DataField>
            <DataField fieldName="ZWORK_ORDER_NUMBER">0123456</DataField>
          </Memory>
        </pmlcore:XML>
      </pmlcore:Data>
    </pmlcore:Tag>
     </pmlcore:Observation>
     </pmlcore:Sensor>
I have the XSLT Mapping working to transform data from Source file to target File. But my target file has multiple Observations that need to be split into the Sensor, Observation structure.

Difference between command line and Runtime.exec()

Hi all.
I'm coding some lines to call sqlldr program.
System info:
OS: Win2k server
Java platform: JSK 1.4
DBMS: Oracle 9i
I've tested sqlldr in command line and it is OK. But when i call Runtime.exec("sqlldr user/pass@servicename control=mycontrol.ctl")
the ErrorStream show that: Message 2100 not found,No message file for product=RDBMS ,facility=UL...
So i had to put a String array which contained "ORACLE_HOME" as the second parameter of exec method. But there's another error appear:
SQL*Loader-704: Internal error: ulconnect: OCIServerAttach [0]
ORA-12560: TNS:protocol adapter error
I checked tnsnames.ora and it's OK. I do the command line again and it's still OK. Why did Runtime.exec("...") method get Error.
Does Someone solve it for me.
Thanks so much.

I'm having the similar/same issue.
I'm trying to run SQLLdr from JAVA.
From a command line, it works fine.. From within JAVA, I get..
SQL*Loader-704: Internal error: ulconnect: OCIServerAttach [0]
ORA-12640: Authentication adapter initialization failed.
Did you find a solution to your problem?

Multiple Message Mapping with same Idoc, Sender and Receiver

Hi,
We have one Interface sending INVOIC02 Idoc from SAP R3 4.6C to SAP R3 4.6C through XI 3.0.
On Inbound side we are using SAP standard configuring one Partner Profile with inbound INVOIC MM process code INVL.
In customizing, we have defined one invoic type for the EDI partner.
Now we have to integrate another type of inbound invoic, but in customizing it's not possible to assign more than one invoic type to the same Partner EDI.
So, we have a restriction in SAP 4.6C inbound standard. On the other hand, we can't desing two Integration Scenarios in XI 3.0 with the same idoc INVOIC02, for the same sender service and receiver service because Integration Directory doesn't allow to create two interface determination for them.
We are thinking on using header mapping in XI (receiver agreement to avoid use the same EDI partner profile for the inbound invoic, but we can't assign the same client and technical system with the same ALE Logical System in SLD for two different business systems.
Does anybody have any solution for this problem, SAP side or XI side?.
Thank you
Best regards
Luis

Hi!
In XI configuration - interface determination, you can specify more than one Inbound interface. If you identify more than one, you get a new column where you specify condition (xpath) for selecting between the different inbound interfaces.
In 4.6c, you can have more than one inbound invoic for the same EDI partner profile, if you separate between them using message function. Just add a new inbound parameter with a different message function, or copy the one you have and specify another message function, i,e. "DIFF".
Hope this helps.
Regards,
Oeystein

Maps: Difference in Downloading Country and states...

Can someone please tell me what is the difference between downloading whole map of a country and again downloading map of state in it.
I have downloaded map of India and it is marked as downloaded buy when I click add new map » India » List of all.states, they are not marked.
So downloading states maps shows more detailed map?
Thank you.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------
Solved!
Go to Solution.

There is no difference in the details of the Map data. Its only to facilitate faster downloading and using lesser space if you are planning to use navigation within a smaller area (State) as against a much larger (Country). You may notice that adding up the file sizes for all States is much much bigger than the file size of whole Country as one. This is because many areas are overlapped when you select States individually ...

Difference testing in CS4 and on the Web

I'm loading an external XML file using ActionScript 3.0 in Adobe Flash Professional CS4. When I test the .fla in CS4 (ctrl/enter), it does not load the correct .mp3 files in two out of six cases. Yet, when I upload the file to the Web and test it, it works properly. Is there some setting in CS4 I am missing?

adjust your local sandbox settings here:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml

Message-Mapping: Button Connect marked field and subsructures is disabled

Hi everybody,
I have a graphical mapping. And I want wo use the button "Connect marked field and subsructures".
But the button is disabled.
(Other buttons in this panel are also disabled)
Do you know any reasons?
Thanks
Regards Mario
Edited by: Mario Müller on May 19, 2009 7:22 AM

Hi,
in
XI mapping button disabled
They write I have to Use JAVA 1.4.2.
I downloaded 1.4.do I have to do next?
In the blog the write
"Go to your control panel->Java->java tab->view."
Which control panel is meant? How do I get there?
Thanks
Regards Mario

Difference between Design Time and Runtime

Hi all, very nice to be here sharing knowledge with each other.
I wanna share my practical experince knowledge that is ,
Almost all the properties that can be set at the Design time for any object can also be set at the Run-time using only
GET_object_PROPERTY and SET_object_PROPERTY.
In fact, I have posted the same info on some othr place, too.
Thanx.

Hi all, very nice to be here sharing knowledge with each other.
I wanna share my practical experince knowledge that is ,
Almost all the properties that can be set at the Design time for any object can also be set at the Run-time using only
GET_object_PROPERTY and SET_object_PROPERTY.
In fact, I have posted the same info on some othr place, too.
Thanx.

Run Time Message Mapping error

Hello Experts,
I am working on JDBC to IDOC scenario. I am getting mapping error at SXMB_MONI and the error message is as below:
com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ZABCD01. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD at and so on.....
I tested in Message Mapping by entering the values and I am able to see the target structure with out any Mapping errors..
But when JDBC real time it got Runtime mapping error as above:
Source
tablename.Set -
1.1
row--
0.Unbound
a----
0.1
b----
0.1
Target
ZABCD01-----1.1
IDOC--
1.1
-Begin-----Required
XYZ--
0.1
a----
0.1
b----
0.1
Dont know where is the problem is: I tried with payload its giving the same error as runtime....
Payload looks as :
<?xml version="1.0" encoding="utf-8" ?>
- <set>
- <row>
<a>value</a>
<b>value</b>
</row>
</set>
Can any one faced same issue?
Thanks
Rajeev

HI Satish,
I created a new Datatype and tested wtih payload still the same..I am unable to create target node as IDOC segment is 0..unbound and below all fields are not not creating stilll they are mapped to source fileds.. what would be the reason?
IDOC structure is:
ZIDOC........................1....1
...IDOC........................1....1
.....BEGIN.....................Requied (I disabled this filed)
.....SEGMENT1.............1....1
.....SEGMENT2..............0...1
.........SUBSEGMENT1...0...99
..............FIELD1.............0....1
..............FIELD2..............0...1
..............FIELD3..............0...1
..........SUBSEGMENT2....0...1
..............FIELD4..............0...1
..............FIELD5..............0...1
JDBC strucute is
MT_XYZ
....set.................1...1
.....row...............0...unbound
......field1............0...1
......field2............0...1
......field3............0...1
......field4............0...1
I am not mapping all fields to respective fileds of source to target ...if I dont map ZIDOC and IDOC then mapping executing successful but I am not getting SUBSEGMENT1 and SUBSEGMENT2 with there fields values..
If I do test by entering values manually it populate all fields values with subsegments but when i copy the payload from SXMB_MONI then I am getting error and If I remove target node mappings I am unable to get subsegment and fileds populated..
How can I make FIELDS of IDOC to get populated??
Thanks
Rajeev
Edited by: rajeev raj on Aug 25, 2009 9:26 PM

Message Mapping error: RuntimeException in Message-Mapping transformation

Hi,
Being new to XI, I am struglling to sort out a basic mapping error. Appreciate if you could help out.
Its an File->XI->R/3 scenario.
My FCC successfully reads the File and creates an XML. However this XML is not transferred to the target XML structure which is exactly same except the root element name is different at top.
I tried various forum tips but I still am getting the error.
( When I Test the Message mapping in test mode..it seems fine, however if I copy the XML from SXMB_MONI, it then throws the above error)
I looked at the MM in text mode: below is the extract
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/SOURCE=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/SOURCE=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/DESTINATION=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/DESTINATION=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=
As seen the name space in both starts with nS0 and end of each line has '=' sign. Is that ok.
I have run out of options and dont know , whats the problem. Please help.
The target and Source XML structures are exactly same as shown below
MT_REQUEST                                 MT_REQUEST_TO_SAP
   |__MSG_HEADER                            |__MSG_HEADER
     |__SOURCE                                |__SOURCE
     |__DESTINATION                           |__DESTINATION
     |__MESSAGE_ID                            |__MESSAGE_ID
And the SXMB_MONI Trace shows the following error
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation:
Cannot produce target element /ns0:MT_REQUEST_TO_SAP.
Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at ..
Thanks
Shirin
Edited by: Shirin K on May 29, 2008 10:29 AM

Hi Prakasu,
As structure are exactly same, I have done 1:1 mapping. So all the fields in target structure are mapped, so no field has beeen left.
In this structure, I do not have any 1:n relation. So 1:1 mapping should be fine.
Apart from this could teher be any other reason.
Regards
Rajiv

Message-Mapping: difference test in IR and runtime

Similar Messages

Maybe you are looking for