Parent Child [MSAS cube is not working in BO]

Hi
Does anyone know if the BO is prepared to work with the Parent Child concept? I'm asking that because I've created a universe connected into a MSAS cube and it's not working for hierarchies designed using the parent child concept. When I include the field in the report, it return me a null value, in other words, an error, however if I remove this field the report works fine.
does anyone suffer of the same issue?
Thx

Hi Rody,
this forum is for the SAP BusinessObjects BI Solution Architecture. I would suggest you post the question into the SAP BusinessObjects product forum for the product that you are trying to use.
regards
Ingo Hilgefort

Similar Messages

Report on Virtual cube is not working.

Hi,
I created a report on virtual cube, Virtual cube is based on Function module which will pick data from Multiprovider, In the FM mention the import parameter name as " Muli Provider" Name.
Multiprovider built on SPO object , On SPO object BIA is created, If can de activate the BIA on SPO then the report built on virtual cube is working in the portal. If I can activate the BIA the report is not working in the portal.
The report is working fine in RSRT and Analyzer either BIA is active and deactive.
Regards
GK

Hi
The multi cube you created must be comprising of Info cubes, DSO and Info objects. Now this error which you are getting is it for
- a specific characteristics or
- any characterisitcs that is entered fourth in the series of filter selections or
- the fourth value in a specific characteristics
Is the characteristics and the value which you use in filter present in all the underlying objects included in the multi cube ? You can check it in each of the objects associated in the multi cube, independently. This will give you an idea as to whether the error reported by the system is genuine or not.
Cheers
Umesh

Parental controls - allow google does not work

I have set up a user account for my 11-year old son, with parental controls enabled, specifically blocking websites with adult content.
Unfortunately, it blocks just about everything, including netflix, facebook and google, so I manually allow these exceptions.
But it does not work. It still blocks Google, allows Facebook login screen but jumbles up the page when you log in, and will not allow videos from netflix.
I can't believe Apple would produce such an inflexible bunch of crap purporting to be Parental Controls, so what is wrong here?

Are you logging into the client using an account from the directory, or using an account on the client system itself?
The client account has priority over the directory account.
For example, if you have an account 'fabian' on the client and an account with the same name 'fabian' on the server (with parental controls enabled), then the client account is the one that will be used and the parental controls won't be used.
You'd need to use different account names (or remove the accounts off the client system) to force users to login with the directory account.

Parental Controls Content Restrictions do not work correctly in iTunes?

I cannot seem to get the content restrictions to fully work in the iTunes Store. The Content Restrictions state that I will not be able to preview, purchase or subscribe to content that is marked as explicit:
But after setting the Applications level to 4+ and making sure the "Restrict explicit content" box is checked:
I am still able to view apps for a 17+ audience. The "Entertainment" section of the App Store is filled with applications that feature sexually graphic content (i.e. pictures of nude women in suggestive positions.) The settings do stop me from purchasing the apps. The "Buy App/Get App" button is grayed out so I cannot get the app, but I am still able to preview the app, including screen shots of graphic content along with detailed descriptions.
Is there a step that I missed? How do I make the 17+ apps not visible? I do not want to disable the entire App store, just the explicit content.
Thanks!

I do not understand why APPLE is making it Rocket Science to protect our kids from this por-nography through their Store.
I have been in a dialgue with APPLE now for 2 weeks about the APP's that continue to come up, and researching further their podcasts also. They continue, as recommended here, to suggest that you complain to the a feedback link that, unfortunately, ends with a thank you and we will not be contacting you personally about this.
My suggestion is that you go to one of their 24 hour response links, here is one! (http://www.apple.com/support/itunes/contact.html?form=app_store&topic=App%20Stor e&subtopic=Downloading%20and%20updating%20Applications) and complain there. It is their respondsibility to manage their content.
The other suggestion is to notify everyone you know of your issue with APPLE and encourage them to also notify APPLE!
Everyone that I have notified is equally dissatisfied with APPLE.
Shame, we have to go so far to get APPLE to do what's right!

Queires on Non-Cumulative Inventory Management Cube 0IC_C03 Not Working

Hello all.
I am trying to use the 0IC_C03 Inventory Management cube with non-cumulative key figures. I followed the How to...Handle Inventory Management Scenarios in BW paper to a tee.
Steps I followed:
1. Ran initialization of beginning balance with 2LIS_03_BX
2. Ran the historical job with 2LIS_03_BF
3. Uploaded to BW the Initialization (BX) and compressed without setting the "No Marker Update" flag
4. Uploaded the historical movements (BF) and compressed setting the "No Marker Update" flag
Now, to this point, everything was fine. Quantities were as expected. Dollar values were as expected. The problem occurs once I load deltas:
5. Loaded delta for 2LIS_03_BF and compressed without setting the "No Marker Update" flag as instructed in the How To... paper
Query example:
MATERIALA:
Initial Stock Balance = 1000 EA
Delta had stock issue of 150 EA (so the stock balance should have decreased from 1000 to 850)
Now, I have the record in BW showing the stock issue of 150. However, the non-cumulative key figure within the query still shows 1000. And when I drill down by calendar day, I would expect the result to show 850, but it seems to add the 150 before taking it away resulting in 1000 which is actually the initial stock balance. It is like it is not recognizing the updates.
Any help would be appreciated.
Thanks,
Brent

Hi!
Here is what helped in my case, very similar to your:
In DTP for 2lis_03_bx (not only in infopackage, as it is said in manual!) you have to change "Extraction Mode" parameter to "Initial Non-cumulative for Non-cumulative values"

Cube viewer not work

i intall oracle 9201 on win2000
but cube viewer doesn't work,
who can tell me how to solve this problem?
thanks .

Please apply the RDBMS 9.2.0.2.1 or 9.2.0.3.0 patch set. This should fix your problem. Also, if you have changed any metadata in your cube, please be sure to execute cwm2_olap_metadata_refresh.mr_refresh.

Remove Child and Event.SOUND_COMPLETE not working inside movie clip. What's the problem?

I have a movie clip that is called to the stage. The user then clicks a button and music plays. As the music starts, another movie clip is called, a simulation of an equilizer. There are several things that should happen:
1) When the user closes the movie clip the music is supposed to stop playing and the equilizer movie clip is removed. What actually happens is the music stops playing but the equilzer movie clip is not removed.
2) When the music is finished playing the equilzer is supposed to be removed from the stage and the play button is reactivated. But none of that happens. When I click on the movie clip a second time equilizer is still there and the play button is not reactivated.
Here's the code that calls the movie clip to the stage.
stage.addEventListener(MouseEvent.MOUSE_DOWN, goButtons);
function goButtons(event:MouseEvent):void
    if (event.target == Song_bnt)
        SoundMixer.stopAll();
        addChild(myPlaySong);
        myPlaySong.x = 304;
        myPlaySong.y = 105;
        //event.stopImmediatePropagation();
Here's the code in the movie clip:
import flash.media.Sound;
import flash.events.Event;
stop();
var playRayJaySong:RJSong;
var playRayJaySongChannel:SoundChannel;
var equilizer:Equilizer;
equilizer = new Equilizer();
playRayJaySong = new RJSong();
//Plays music, inactivates buttons, and adds the equilizer to the stage.
PlaySongRJClip.addEventListener(MouseEvent.MOUSE_DOWN, songPageButton);
function songPageButton(event:Event):void
    playRayJaySongChannel = playRayJaySong.play();
    PlaySongRJClip.visible = false;
    ClicktoPlaySong.visible = false;
    addChild(equilizer);
    equilizer.x = 269;
    equilizer.y = 246;
//Removes the equilizer from the stage when the music is complete.
PlaySongRJClip.addEventListener(Event.SOUND_COMPLETE, rjSoundComplete);
    function rjSoundComplete(e:Event):void
    PlaySongRJClip.visible = true;
    ClicktoPlaySong.visible = true;
    removeChild(equilizer);
//Removes the equilizer and event listeners from stage and calls dispatch event to close the movie clip.
closeSong_bnt.addEventListener(MouseEvent.MOUSE_DOWN, CloseSong);
function CloseSong(event:MouseEvent):void
    removeChild(equilizer);
    dispatchEvent(new Event("RemoveMSong"));
    PlaySongRJClip.removeEventListener(MouseEvent.MOUSE_DOWN, songPageButton);
    PlaySongRJClip.removeEventListener(Event.SOUND_COMPLETE, rjSoundComplete);
//Removes the MovieClip from the stage when the user clicks on the close button inside the MovieClip.
myPlaySong.addEventListener("RemoveMSong", RemoveSongClip);
function RemoveSongClip(e:Event):void
    SoundMixer.stopAll();
    removeChild(myPlaySong);
Any thoughts?

I figured out the problem. Here's how I reorganized the code (all in one frame).
//Code for Ray Jay song.
var playRayJaySong:RJSong;
var playRayJaySongChannel:SoundChannel;
playRayJaySong = new RJSong();
myPlaySong.equilizer_inst.visible = false;
//Plays the song.
myPlaySong.PlaySongRJClip.addEventListener(MouseEvent.MOUSE_DOWN, songPageButton);
function songPageButton(event:Event):void
    playRayJaySongChannel = playRayJaySong.play();
    playRayJaySongChannel.addEventListener(Event.SOUND_COMPLETE, rjSoundComplete);
    myPlaySong.equilizer_inst.visible = true;
    myPlaySong.PlaySongRJClip.visible = false;
    myPlaySong.ClicktoPlaySong.visible = false;
//Removes the MovieClip from the stage when the user clicks on the close button inside the MovieClip.
myPlaySong.closeSong_bnt.addEventListener(MouseEvent.CLICK,RemoveSongClip);
function RemoveSongClip(e:Event):void
    SoundMixer.stopAll();
    removeChild(myPlaySong);
    myPlaySong.equilizer_inst.visible = false;
    myPlaySong.PlaySongRJClip.visible = true;
    myPlaySong.ClicktoPlaySong.visible = true;
    playRayJaySongChannel.removeEventListener(Event.SOUND_COMPLETE, rjSoundComplete);
//Resets all of the movieclips to their orginal state.
function rjSoundComplete(e:Event):void
    myPlaySong.equilizer_inst.visible = false;
    myPlaySong.PlaySongRJClip.visible = true;
    myPlaySong.ClicktoPlaySong.visible = true;
Thanks all for your suggests and input.

Do the custom rollup member formulas work recursively for parent child dimension?

Hi
We have custom rollup set up for Account dimension which is parent child.
It seems to work fine when the custom member formula refers to a base account member i.e. if the formula for MemberKey4 is (MemberKey1 + MemberKey2) then it shows the sum of the underlying members 1 and 2.
But if the formula for MemberKey10 is (MemberKey3 + MemberKey4) then it should evaluate the value for MemberKey4 first and then add to it value for MemberKey3 to come up with final number for MemberKey10.
Do the custom rollup work fine with the recursive calculations? Is this recursion limited to some level?
Thanks
Shailesh

Hi Jorg,
Thanks for your input.
Actually the hierarhcy is more determined by the parent child relationship. So we cannot move the members as per the formula. And further the formulas are not always additive, there are divisions and multiplactions happening also.
Further the calculated members (account members) are used in different places, the usage level of calculated members could be 3 in some cases i.e. MemberKey15 = (calculated using MemberKey10 = (calculated using MemberKey7 = (Calculated using MemberKey4 = (calculated using base members)))). Now inserting the base members in place of a calcuated member becomes more of string manipulation.
And on the top of above complexity, the formulas are not static and they are more user defined, they may change between time periods, which forces us to write a dynamic procedure to translate the 'business formula' into SSAS formula. We expect the custom rollup to work as expected (i.e. if the formula contains a calculation involving the calculated member, it should resolve that first and so on) and we have written generic procedure to replace the Account Code in the 'business formula' with the accont key value with the account hierarchy char string.
In the link http://doc.ddart.net/mssql/sql2000/html/olapdmad/agmdxadvanced_6jn7.htm for AS2000, it talks about the calculation pass deapth, it says:
.......If a cube has custom rollup formulas or custom rollup operators, a second calculation pass is performed to handle the computations needed to calculate these features.......
Now from the above, it is obvious that the OLAP engine will automatically go into recursion if the formula contains a cacluated member and it knows that the calculated member has to be resolved first before calculating the final formula result. The above article also talks about 'Calculation Pass Number' property in the AdvanceCube Editor (AS2000), which can be set to the value depending on the expected number of passes required in a given scenario. I don't find such an equivalent peoperty for SSAS 2005.
Would anybody please throw some more ideas / insights on this issue?
Jorg, thanks again for your input...
Shailesh

UCCE Parent Child Questions

Assuming I introduce a new parent UCCE 8.x system for a new service with a v7.x child system that's already setup to handle calls for existing services can you clarify the following;
Can the child UCCE instance handle some calls from the new service via the parent whilst also handling local calls from existing services? Are there any restrictions?
How does the agent licensing work? Do the agents on the child system also have to be licensed on the parent?
Can the new 'Packaged CCE' be considered for the new parent system as the total number of agents will be less than 200?
Also need to consider question 1 if the child is a CCX system
Many Thanks, Ade.

1. Yes, not sure what kind of restrictions you're thinking of, have a look at the overall Parent / Child documentation for limitations etc. though;
3. No, Packaged CCE is a very specific deployment model, the Parent/Child Gateway PG is not supported here;
4. Similar to 1.
Cheers,
Kris

IPCC Parent Child Autoconfiguration Issue

IPCC Parent-Child Autoconfig Failure
We have a IPCC Parent Child implementation. It is working since last year.
It consist of one ICM Parent (7.2.7) and 13 child System IPCC (7.2.7)
We are trying to integrate another Child to the Parent. This new Child is a IPCC Enterprise 8.0(2)
The Child is configured with a System IPCC PG, in accordance with the document:
Cisco Contact Center Gateway Deployment Guide for Cisco Unified ICME/CCE/SCCE/CCX. Enterprise Release 8.0(1)
and Express Release 8.0(1) it is configured and we tested it and is working, it is ready to be integrated to the Parent.
For integration with this new Child we added in the Parent 2 new servers and the Enterprise PG is configured.
The pim for the Enterprise PG Gateway is Active.
On the Parent AW we can see that the Services are being replicated (CallTypes from the new Child)
Also we can see peripheral Monitors replicated on the PG Explorer (this is the device targets from the new Child)
The problem is that Skill Groups and Agents from the new Child are not being replicated to the Parent.
We double checked configurations. Reconfigured the whole Child IPCC but just CallTypes and Device targets are
being replicated, not the SkillGroups and Agents.
Someone has dealed with an issue like this???

Hi,
Can you check AutoConfig log file on Enterprise GW for this new child.
It will show you why these skills and agents are not getting replicated to parent.
Cheers,
Vinod K

Parent Child relationship is lost in new table

Hi Guru's
I am creating a table from a flat file that is currently in a parent child hierarchy to a staging table in Oracle. I have added a nextval sequence in a Row column, but after loading the flat file, and ordering by the column, the parent child hierarchy is still not listing correctly. I have to do other ETL on the table and I wanted to then load this metadata into Planning, but naturally it is not loading b/c the hierarchy is not recognized. Is there a way to to keep the parent/child hierarchy integrity?
Thanks for the help

I have used that in the final integration from a Oracle table to the Planning application. I guess the issue is that I need to load the flat file to an oracle table first. I have loade it with the file to sql KM and created a sequence.nextval column in that table. When I try to order by my column here, the file is no longer in the 'Parent' 'Child' order any longer. I have the Sort_Parent_Child option True, as well as the Load_Order_by_Input = True. My process runs File to SQL -> custom Procedure -> then IKM SQL to Planning so I am not sure if the last KM would recoginize the original order of the flat file input. Am I missing something?
Thanks in advance.

Spry select menu validation not working for all menus

This is VERY strange...I have two menus which show depending on the selection in another menu. The other, or main, menu has the spry validation working fine. So does the validation for one of the other 'child' menus. But the other child menu validation does not work, despite the fact that the code is nearly identical for both except for the spry ids and select ids (of course). You can see the form working at:
https://registrations.ucc.usyd.edu.au/profile.php
If you select, say, Arts faculty from the faculty menu, then you will get another menu for schools. Validation works for these when the submit button is pressed. However, if you select 'Not Faculty' from the faculty menu another menu will show instead of the school menu. This is the menu that is not validating.
I have attached my php page for the code in this form.
The same problem exists for other menus that are in hidden divs further down the page.
Any help appreciated!!!!

Your key is the "suitcase fusion for a font manager" line.
There is a bug where you won't be able to create a button if you have a bad font, or a duplicate font, installed.
First try shutting off all of the fonts you have open with Suitcase, and see if that helps. If so, open one suitcase at a time until you figure out which font is the culprit.
If shutting off all but the basic System fonts does not help, you might have to reinstall your system, or somehow update your core System fonts. I don't know how to do that, but there was a recent article at http://www.tidbits.com/ that discussed fonts and their maintenance. But ultimately it's a font problem.

OBIEE 11g - Navigation in Parent Child Hiearchy not working

Hi All,
I have a employee parent child hierarchy and I want to show revenue for each employee in the report. I have modeled my revenue as a measure like case 4 shown in the following link
http://www.rittmanmead.com/2010/11/oracle-bi-ee-11g-parent-child-hierarchies-multiple-modeling-methods/
So for example this is my report ,
--David (30)
---Sandra (15)
-----Joe (10)
Joe'e revenue is 10, Sandra's is 5 (showing her 5 Joe's revenue) and David's is 5 (showing his 5 Sandra's revenue)
Issue :
Now what I want is to provide action link on the revenue column so that when user would click on revenue for any employee it would direct them to a detail report showing the bifurcation.
For ex, I want that when user click on 15 which is Sandra's revenue, he would be redirected to a detailed report for Sandra and similary for Joe and David
MY ISSUE IS that the navigation is NOT working for sandra and Joe. It is only working for David (who is the ancestor of sandra and Joe). When I click on 15 to see sandra's detail report, it doesn't do anything and in the bottom left corner of the browser status bar below I see an ERROR saying
(same for Joe but David work's fine)
Message: 'getLevelInfo(...)' is null or not an object
Line: 1
Char: 11142
Code: 0
URI: http://localhost:7001/analytics/res/b_mozilla/answers/selectionsmodel.js
Why is that happening? Is that because I have modeled the revenue as an measure and not attribute. Is navigation not possible in this case?
Anybody has any solution or workaround for this, it will be highly appreciated.
Thanks,
Ronny

Ok, so let me explain this in detail and give the structure of my tables and the data,
There are three tables.
1.Parent Child relationship table - pctable
2.Closure table which OBIEE creates through a script - reltable
3.Fact table which contains the revenue - facttable
This is the data
pctable
personid | managerid
David | NULL
Sandra| David
Joe|Sandra
reltable
memberkey | ancestorkey |distance |is_leaf
David|NULL|NULL|0
David|David|0|0
Sandra|Sandra|0|0
Joe|Joe|0|0
Sandra|David|1|0
Joe|Sandra|1|1
Joe|David|2|1
facttable
personid|revenue
David|5
Sandra|5
Joe|10
and my joins conditions are, I join pctable to reltable and then reltable is joined to facttable like this.
pctable.personid = reltable.ancestorkey
reltable.memberkey = facttable.personid
and then in the report, when I pull up the pchierarchy build from pctable and revenue , I get as below and like I said, when I click on Sandra to see the revenue she contributes, I am not able to navigate. Can you let me know what modifications needs to be done?
---David(20)
----Sandra(15)
------Joe(10)

DB Adapter wizard – WHERE clause on parent and child tables not working.

I have two tables, SECURITY and SECURITY_POSITIONS, where SECURITY has a 1:M relationship with SECURITY_POSITIONS. I used the DB-adapter wizard to create the relationship and the following WHERE clause expression which is looking at both the parent and the child tables;
The expression builder looks like this:
AND
|--- 1. partitionKey EQUAL p_SearchKey
|--- 2. securityType EQUAL “DBT”
|--- 3. securityPositionsCollection.dealReference EQUAL “NA”
The primary key on SECURITY = PARTITION_KEY and SECURITY_REFERENCE
The foreign key from SECURITY_POSITIONS to SECURITY = PARTITION_KEY and SECURITY_REFERENCE
securityType is on SECURITY table (master)
securityPositionsCollection.dealReference is on SECURITY_POSITIONS table (child)
The invoke on the database adapter is selecting a row in securityPositionsCollection for each child row, rather than just those with dealReference = “NA”!
I turned on DEBUG logging in the BPEL console and I can see that there are 2 SELECT queries run (guess this is how Toplink does it!), where the 1st query appears to select the parent rows and the 2nd query selects the child rows.
However the 2nd query is not working because it is failing to select only those child rows where dealReference = “NA”. Also, don’t know why the 2nd SELECT query needs to specify the child SECURITY_POSITIONS table twice in the FROM clause, because that seems to be causing the problem.
1st query executed is as follows;
SELECT DISTINCT t0.PARTITION_KEY, t0.SECURITY_REFERENCE, t0.SECURITY_TYPE
FROM CENTRAL.SECURITY t0, CENTRAL.SECURITY_POSITIONS t1
WHERE ((((t0.PARTITION_KEY = ?) AND (t0.SECURITY_TYPE = ?)) AND (t1.DEAL_REFERENCE = ?)) AND ((t1.SECURITY_REFERENCE = t0.SECURITY_REFERENCE) AND (t1.PARTIT
ION_KEY = t0.PARTITION_KEY)))
bind => [200706200000, DBT, NA]
2nd query executed is as follows, where child table appears twice! ;
SELECT DISTINCT t0.DEAL_REFERENCE, t0.PARTITION_KEY, t0.SECURITY_REFERENCE
FROM CENTRAL.SECURITY_POSITIONS t0,
CENTRAL.SECURITY_POSITIONS t2,
CENTRAL.SECURITY t1
WHERE ((((t0.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND (t0.PARTITION_KEY = t1.PARTITION_KEY)) AND
(((t1.PARTITION_KEY = ?) AND (t1.SECURITY_TYPE = ?)) AND
(t2.DEAL_REFERENCE = ?))) AND
((t2.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND
(t2.PARTITION_KEY = t1.PARTITION_KEY)))
bind => [200706200000, DBT, NA]
Anyone experienced the same problem e.g. why is toplink making the query more complicated that it needs to be, because the query only needs to reference the SECURITY_POSITIONS table once, as follows;
SELECT DISTINCT t0.DEAL_REFERENCE, t0.PARTITION_KEY, t0.SECURITY_REFERENCE
FROM CENTRAL.SECURITY_POSITIONS t0,
CENTRAL.SECURITY t1
WHERE ((((t0.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND (t0.PARTITION_KEY = t1.PARTITION_KEY)) AND
(((t1.PARTITION_KEY = '200706200000') AND (t1.SECURITY_TYPE = 'DBT')) AND
(t0.DEAL_REFERENCE = 'NA'))) AND
((t0.SECURITY_REFERENCE = t1.SECURITY_REFERENCE) AND
(t0.PARTITION_KEY = t1.PARTITION_KEY)))

Hello,
It looks like you have configured your 1:M relationship to use batch reading. This causes the query to bring in the Security_Position table's objects to use the same selection criteria as was used on the initial query, with a join statement. This is more efficient in most cases as it ensures only the Security_positions needed for the Security objects to be fully built are read, in a single query.
The selection criteria added is only used to filter out the Security objects. All referenced Security_Positions must be read in for the returned Security objects so that the data matches what is in the database. If you do not want the Security_Positions, you might try using indirection on the mapping which will delay the second query until you need the Security_Positions. Or, if you want only the Security_Positions with dealReference EQUAL “NA", you could do a query specifically to filter on them.
Best Regards,
Chris

Parent Child Hiearachy not working while applying from prompt

Hi,
I have a requirement to have a prompt on parent-child hiearachy. I am able to create prompt but when we are selecting anything in that prompt then value is not passing in the main report. I mentinoned "override with prompt" in selection steps, but still prompt is not working. I am using OBIEE 11.1.1.5.
Please let me know if I am missing anything.
Thanks
Anirban

Hi All,
Any updates on this.
Thanks
Anirban

Parent Child [MSAS cube is not working in BO]

Similar Messages

Maybe you are looking for