Paritial Confirmation Issue

Dear All
                 I have one issue in the partial confirmation.
1.The routing data for a semi finished  material is as follows :
Base qty : 1 pc
Set up time : 10 min
Machine time : 1 min
2.Production order is created for 100 pcs, to produce 100 pcs the following timings are req.
Set up time : 10 min
Machine time : 100 min
3.While doing confirmation ,System is displaying for 100 pcs  as follows, upto here there is no problem
Set up time : 10 min
Machine time : 100 min
4.The problem is while doing partial confirmation for 50 pcs , System is displaying for 50 pcs  as follows.
Set up time : 10 min
Machine time : 100 min
It Should be
Set up time : 10 min
Machine time : 50 min
what are settings are required in IMG ,so that system will display the correct timings only which are required for 50 pcs , here I am requesting u kindly give your valual
inputs.
Regards
Prasad

Prasad,
Check confirmation parameters for the order type/Plant in transaction OPK4. Propose quantity and timings to should be ticked on.
Regards,
Prasobh

Similar Messages

  • Need a solution for a confirmation issue.

    Hi,
    I have come across a scenario mentioned below.
    For a PO multiple confirmation and a cancellation have been done.
    The confirmations checked in portal in "confirm goods receipt/ services performed" tab shows there only 1 cancellation done.
    And, for the same PO  in the "display/process confirmation" ,  it is showing 3 reversal documents and their status is posted in backend. But when checked in ECC backend, only 1 cancellation is found.
    I wanted to know what could be the reason for the reversal documents not being reflected in ECC.
    So, could someone please suggest on this issue asap.
    Thanks and Regards,
    Lakshmi.

    Hi
    Pl check the iDOC WE05.
    Regards.
    Satish Gopal

  • Purchase to Order Scenario - Partial Confirmation Issue

    Hello Team,
    We are using Item Category with Purchase to Order Scenario. When the Sales Order is booked, Purchase Requisition is Created. Sales Order Line is linked to the Purchase Requision/Purchase Order.
    In this scenario, we are getting confirmation on Sales Order through PR/PO Initially.
    Order Quantity     Confirmed Quantity
    10                         10
    Once we receive partial confirmation on PO let us say 7 system only confirms partially Sales Order.
    Order Quantity     Confirmed Quantity
    10                         7
    Issue happens when our team does partial delivery to customer before receiving full confirmation from the Supplier. System blocks further update of confirmation on the line and it becomes impossible to make delivery to Customer for Partial Quantity.
    I can think of two options...
    1. Somehow when we receive Partial Cofnirmation, our Availibility Check should confirm 7 on Confirmation recieved from the Supplier and 3 from Delivery Date of Purchase Order. So this issue won't happen.
    2. System should somehow allow Partial Confirmation even after Partial Delivery is done to the Customer.
    Do let me know if you need any more details from my side.
    Kaushal

    Hi Kaushal,
    i assume that you have special stock indicator in your sales order.
    if you do not use confiramtion then all quantities are confirmed at schedule line level.
    if you use confirmation e.x. 7 of 10 pieces then you will have confirmer 7 quantities in your schedule line.
    if you create another confirmation in PO of 2 pieces and lets say different date you will see another schedule line in your sales order.
    do your system works like this?
    Is your third party scenario require a googds receipt for PO to move on to delivery?
    Regards.

  • Order confirmation issue output through output device sent email

    Hi:
         We set a output device type is eMail. When I print out order confirmation that I can to select output device 'email' and will display a field of email address to input email address.
         That is work in PRD, but in the DEV alway can't display the field of email address. Can anyone to tell me why?
    Best Regards,
    Nicole

    Dear Chen,
    This issue may related to output program so please take help of ABAPer to fix the issue.
    I hope this will help you,
    Regards,
    Murali.

  • Warehouse task automatic confirmation issue

    Hi Experts,
    I have a requirement to implement two-step picking as follows:
       Product1 should go to one interim zone - 2010 in first step picking and then it will be dispatched to external customer with second step.
       Product2 should go to another interim zone - 2011 in first step and second step will be delivered to waiting customer with second step.
      For product1, i defined WPT 2020 in which i have mentioned destination storage bin as 2010-ZONE (ie. for 2010 interim zone),
      and maintained all the 2-step picking settings with 2020 in SPRO - Goods issue - wave management - General settings -> Set up two-step 
      picking
      but for product2, i defined WPT 2021 and maintained destination bin as 2011-ZONE (ie. 2011 interim zone) and i can't maintain 2021 in "SPRO -  Goods issue - wave management - General settings - Set up two-picking ".
    So, for 2021 WPT case, when I confirm first step, second step is also getting confirmed automatically. which should be open. Working fine for WPT 2020.
    Can you please suggest me in this issue? Little urgent to me. Thank you in advance.
    Thank you..
    Srini

    Hi,
    I would say that without implemnting a Badi (and I don't know is an extension spot is available at this point) your requirement can not be fulfilled. As you noticed already, there is only one WPT you can assign for the first step, so 2011 should never be processed at all.
    brgds
    Juergen

  • TO confirmation issue

    Hi All,
    I am getting the same error message "The sum of the confirmed quantity exceeds the sum of stock items"
    Message no. VV040
    And it is occurring in the pick TO confirmation stage against outbound delivery document for STO. There is 680 qty available in the pick bin but system is giving zero qty available when trying to confirm the pick TO
    This is happening in the production system and we have not made any configuration changes recently and also its effecting only one material so far.
    Please suggest what could be the issue, would solution suggested by Satya to Cathy be applicable for us too
    Please suggest

    Hello,
    You need to chcek the stock at issuing plant storage location.
    There is 680 qty available in the pick bin but system is giving zero qty available when trying to confirm the pick TO
    Even if the stock is shown as unrestricted stock, there is possibility that stock is alrady issued for some other open orders and or purchase order. You can check this by chceking the bin stock , if warehouse managements is activated.
    Go to MMBE enter the material, issuing plant and then go to Environment data and chcek the WM stock.
    It seems that the stock which you are currently seen in unrestricted use may be lying interim storage bin issued against some sales order with open transfer orders.
    Also the other possibility is negative stock are not allowed for respective strorage type and material.If negative stokcs are allowed and replnishment control is manual set in customizing , you can confirm the transfer order and do the post goods issue even if stock is not avialable.
    Br,
    Tushar

  • Fax Confirmation Issue

    We have an Officejet Pro 8600 Premium that Fax Confirmations ith images on send is turned on. And appears to work just fine when physically faxing from the printer's feeder. But when faxing over the network through the HP Software no confirmation prints out. And we really need to have every fax sent print out a confirmation no matter how it gets sent to the printer. Is this a known issue, or is the way we have it set up supposed to do what we are wanting and the fact it isn't is outside of the expected behavior? Any info would be really helpful as we really need to have confirmations of our sent faxes.
    Thanks
    Hal
    This question was solved.
    View Solution.

    Hi Hal,
    A printed fax confirmation (either with or without an image of the first page) is only available for a dax sent from the device itself, a such is not available while sending a fax from the HP Fax Software.
    For the fax software you may only view the Fax Log from the software which include a list and the status of the last 30 fax jobs.
    To get a printed report you will have to send the fax from the device itself. This is the way any HP printer work by design, it is not an issue of the software.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Activity confirmation issue

    Dear Gurus,
    We are facing issue in confirmation of Activity such as power , steam. As in process industry output is variable.
    accordingly at the time of confirmation activity viz power , steam should varies is it possible?
    In transaction cor6 we can enter manually units actually consumed.
    My second query is
    In T-code CORK and COID  How to / where to enter actually consumed unit of Power and steam in screen? As users  are using all the 3 T-code for confirmation.
    Please guide me as we are facing cost variance in Process order confirmation due to activity.
    Regards,
    J.H.Pert

    COID is just reporting transaction.
    COR6N is single screen entry transaction
    CORK is header confirmation
    When you do confirmation using CORK, all the confirmable phases in the order gets confirmed to the yield qty mentioned in the screen, this also take care of activity confirmation.No option to post activity seperately.
    cor6 you can post actual activities seperately

  • Order Qty Confirmation Issue

    I am facing an Issue  as below and hence seek your views
    For a Sales order, the confirmation of schedule lines is as below:
    AS it is visible, the Qty of 3 pc was scheduled to be confirmed later. The confirmation is 3 units short even though the order was processed before other orders which have been fully allocated. .
    The Availability Check in Material Master is
    The OVZ2 screenshot for the above Availability check is
    Please help and suggest for what can be the probable cause. Has it got anything to do with the fact that the original order qty was not a carton quantity, ie, divisible by 6.

    Hi SS
    Order is a normal (Type: OR) Trade order. And there is no consignment stock maintained for this material. 
    In MMBE, I can see only unrestricted stock exist for this material. 
    Please confirm whether my material setup is correct. 
    It is usual vanilla setup. 
    My doubt is that how come the order item has been confirmed with excess qty and system allows us to create the delivery as well.
    Firstly, on what basis the order full qty has confirmed. 
    Please advice.
    Regards
    Priyan

  • PO Confirmation Issues.

    Hello Experts,
    I am having some difficulty updating the Purchase Order Confirmations Tab of the PO.
    Right now, I am using ME_CONFIRMATION_UPDATE  to take date that is being received through an inbound IDOC formatting it, then calling the above Function Module. The Purchase Order is updating correctly but the Stock/Requirements list is NOT.  In MD04 if I manually update the PO and Save, the Shipping Notification line replaces the POItem line. When the Function Module runs, It Adds  the Shipping Notification line in addition to the POItem line.  From what I have read, it is probably due to this FM being a direct insert into the table, and I would need a PO Save feature to properly update the PO, and by doing so the Stock requirements list.
    Playing around I have tried to create a BDC with little success. I'd rather not use a BDC.
    I have done some reading about using BAPI_PO_CHANGE, and from some of the posts I read, It seems to (At least from time to time) have the same issue.
    If anyone can provide some direction and assistance, it would be greatly appreciated.
    Regards,
    Christopher

    Hello to all,
    that is just for documentation. SAP answerd the problem in OSS-304243 but this message is not accessable if you don't have powerful OSS-Users.
    This SAP-note might be interesting: 197958
    OSS-Message 652796 8.8.2011
    BAPI_PO_CHANGE
    We can not process confirmations by using the parameter poconfirmation.
    The Baps reports always S 06 022 - no data changed.
    In the SDN there are some hints telling that the BAPI_PO_CHANGE does notsupport processing of confirmations. More detailled infos should be in
    the OSS-Message 0000304243 but this message is not accessable for us.
    Can you confirm that the BAPI_PO_CHANGE does not support adding
    confirmations? We debugged the BAPI and there is no code for updating
    confirmations found.
    Best regards
    Bernhard Lascy
    09.08.2011 - 10:43:07 CET - Antwort von SAP
    Dear Bernhard,
    I regret to inform you that the functionality you request is not
    implemented in the R/3 standard system.
    Unfortunately it is not possible to change/load confirmations with the
    function module BAPI_PO_CREATE/BAPI_PO_CHANGE. Table POCONFIRMATION in
    BAPI interface is relevant for Display/List Vendor Confirmation in BAPI,not for update/insert Vendor confirmation in PO.
    Furthermore, we recommends that you use Idocs for automatically
    entering confirmations. The Message type to use is ORDRSP.
    You may read more about this topic in the online documentation.
    Please see also following attached note for your reference.
    456127 FAQ: Electronic Data Interchange (EDI) in purchasing
    Best regards,
    Pavel Olysar
    Support Consultant
    Global Support - Logistics

  • Repair Scenario and confirmation issue

    Hi,
    The scenario of my customer is like that :
    1. Notification : Service Request     -
    IW51
    2. Sales order RA : Repair order  -
    VA02
    3. Delivery : Return delivery (Return for repair) -
    VL01N
    4. Service order SM03 -
    VA02 -> IW31
    5. Confirmation -
    IW42
    But in confirmation, I can't confirm item, causes, tasks and acitivities for the service order. Because, there is no link between service order and notification....
    It's possible to link service order SM03 to the notification IW51 which already exist.
    Thanks in advance for your help to resolve this issue.
    Regards,

    Hi,
    In confirmation t-code IW42, I can't confirm the activities and tasks.
    Notification  ---> Sales order  -
    > Service Order -
    > confirmation order
              <----
    > 
    When I assign service order to notification, it works only when I create directly a service order from notification. But it's not work when I pass from through a sales order (RA: repair order)

  • LT12- TO Confirmation Issue

    Dear Experts,
    My Storage Location 1001 is WM+HU managed
    I have a created a TR and then converted to it to TO.  Now I am about to confirm the TO in LT12
    The issue is, the "pack" option in LT12 is disabled.
    The destination storage Unit is "blank".
    Kindly suggest me why the "Pack option" is disabled and also which storage unit should I enter in LT12 so that I can procced by confirming the TO
    Regards,
    Shetty

    to enter the storage unit u need to check 2 things
    which storage bin types are allowed for whcih type of storage unit type
    and which storage type is activated for the Storage unit management.
    then select this storage type and from bin status report LX03 u can find the bin number which u can mentioned there

  • Nokia E90 Confirmed Issues/Defects

    Hi everyone,
    Nokia have confirmed the following issues that have been discussed/shared in our forum. The first one is regarding the noisy background during phone calls. The other one is the scratches or contact points in the internal LCD screen caused by some keys touching the screen
    Please refer to the following for more details - http://www.pcmag.com/article2/0,1895,2176477,00.asp or http://www.smarthouse.com.au/Accessories/Mobile_Phones/D3B7W7V2?page=1
    My question is, will the affected units be replaced by Nokia given that the second issue has already been addressed and what is their time line for the resolution of the first issue.
    Just hoping that someone would be able to provide a feedback or response.
    Thank you.Message Edited by spectred on 12-Oct-200704:50 AM
    Reason has always existed, but not always in a reasonable form.
    - Karl Marx -

    That would be great. Thanks for the tip phoenix9000.
    Reason has always existed, but not always in a reasonable form.
    - Karl Marx -

  • Sales Order Qty Confirmation Issue

    Hi
    I have created the order form my material with quantity of 10 units. The total unrestricted stock available for the material is only 5 units.
    When I look at the schedule lines, the total order qty is confirmed even though the short of 5 unit of stock. 
    I was confused here.  By right, the order should only confirm the 5 unit with respect the stock availability. But I don’t understand why system has
    Confirmed the 10 units completely. 
    If my understanding is correct, the sales order has to confirm the sales order based on the stock. In later stage, once the stock is up, we need create the
    Schedule line for the remaining qty by re-do the availability check function.  
    Could you please someone correct me on this order confirmation logic !!
    Regards
    Priyan

    Hi SS
    Order is a normal (Type: OR) Trade order. And there is no consignment stock maintained for this material. 
    In MMBE, I can see only unrestricted stock exist for this material. 
    Please confirm whether my material setup is correct. 
    It is usual vanilla setup. 
    My doubt is that how come the order item has been confirmed with excess qty and system allows us to create the delivery as well.
    Firstly, on what basis the order full qty has confirmed. 
    Please advice.
    Regards
    Priyan

  • Line item confirming issue

    We have a probelm with TAPA/TAN orders confirming the product. The TAPA line may "confirm " the entire amount requested , but the TAN line only confirms what is available even with the complete button checked on the order, therefore, if the sales person doesnot notice that the TAN line is not fully confirming, we may ship partial loads of orders. this is a manual process that is causing problem to the customers. How to resolve so that both item line confirm or donot confirm. Plz help.
    Thanks!

    Path
    SPROSD-BFAC and TOR-ACAC with ATP-Define default settings
    Here configure the last field with B-Full delivery.
    This will solve your problem. If you keep as B, it will confirm only the full quantity for the material, else it wont confirm at all.
    Rwd if it helps.

Maybe you are looking for