Parking Several PO into One Invoice

Hi,
Is it possible to park several PO into one invoice. Using MIR7 allows me to park 1 PO per Invoice only.
Thanks.
Kath

Hi,
You can.
In MIR7 you click on the multiple option avaialble near PO/Schd. agreement there you can mention several PO & press adopt button, then all the Open GR's for Invoice will be copied into this MIR7 Screen in the line items.
Generally invoices are booked as per delivery challan no., if you had maintained the delivery note no. in GR then you can book the invoice accordingly for different PO's.
Regards,
Umesh

Similar Messages

Combine selected Debit memo request Items into one invoice

Hi
The requirment is to select line items from multi debit memo request documents and combine those line items into one invoice.
So far, our ABAP developer is designing an selection screen to list all the line items met certain criteria (e.g. certain material number, or certain service rendered dates etc.) from multi debit memo request.
My challenge is how actually combine all these line items and push into one invoice ?
I see that in VF01 SAP provides the capability to combine multi sales documents into one invoice processing . ( forget about the invoice split rule for now.) , but the item selection is greyed out.
If I use VF06 do the collective billing, where to enter the line items ?
Is there some user exit / BAPI can push line items from different sales document into one invoice creation ?
Please let me know if my requirement is not clear.
Thanks
Edited by: Eric Y on Aug 25, 2008 6:04 AM

Reply to R.Janakiraman:
1.) As my understanding that debit memo is a billing invoice. Debit Memo Request is a sales doc. At least what I meant here debit memo and billing invoice is the same document.
2.) We would like create the debit memo (invoice) through "SD" not FI.
The challenge still exists, let me explain.
Let's say we have 50 Debit Memo Request (DMR) Documents ready to bill the customer and each DMR has multi line items.
e.g. DMR 001 has 20 line items and DMR 002 has 30 line items.
The customer would like to take the 10 line items from DMR 001 and 20 line items from DMR 002 ( by certain selection criteria) to combine into one invoice.
I was thinking use VF01 to combine the DMR 001 and 002 and let the program put billing block on those non-billed items, but in reality it doens't work; because some of the line items in the original DMR may have already been blocked the user. If the program put billing block, I can't tell whether the line item billing block is set originally by end user or the program.
What I am trying to search for is the solution to take some of the line items from different DMRs and combine into one invoice, not combine several DMRs into one single invoice.
Please help if there is any BAPI can do the job .
Thank you, Ashish Mohapatra , I will ask our ABAP developer to investigate the bapi
BAPI_SALESDOCU_CREATEFROMDATA1.
SNavaneetha
You said that "The line items being greyed out is due to the property of the Item category of the DMR". Does that mean I can config the item category to allow to be entered ? Which field in the Item category that I can do that ?
Great thanks for all
Edited by: Eric Y on Aug 30, 2008 7:13 PM

How Do I Combine Several Images Into One Image Which Contains Links To A Series Of Web Sites?

How do I combine several images into one such that the combined image contains a series of web links? In particular, I’d like to create such an image and put it into my Outlook email signature. At present, as per the image below, I have at least six separate images in my email signature with each image containing a web link. Is Photoshop the best tool for this job? Or would it be easier to do this in some other package? I have three packages at my disposal: Photoshop, Ilustrator and Dreamweaver. Can someone please explain in detail how I would do this? Or perhaps someone could direct me to a link that explains how to do this. Thank you.

Thank you for that correction, Hobotor. I admit I hadn't thought about an image map, in the context of someone who doesn't seem to know HTML very well... My thinking was running along the use of the Photoshop Slice Tool to get most of the way there...
To expand on the above, if you were to slice up your image using the Slice Tool, say like this:
Save for Web & Devices will create the HTML and save all the sub-images.
Then you edit the HTML and add a (hypertext link) elements surrounding the various images. Only thing is you'll have to set the border-style of the images to none.
For example:

<table id="Table_01" width="554" border="0" cellpadding="0" cellspacing="0">
<tr>
<td colspan="10">
   <img id="Sig_01" style="border-style:none" src="images/Sig_01.jpg" width="554" height="56" alt="" /></td>
</tr>
<tr>
<td colspan="10">
   <a href="http://www.GrahamsWebSite.com"><img id="Sig_02" style="border-style:none" src="images/Sig_02.jpg"
        width="554" height="43" alt="" /></a></td>
</tr>
etc.
A full copy of the HTML and images can be found here... View Source to see it as an example:
http://Noel.ProDigitalSoftware.com/temp/Graham/Sig.html
-Noel

How do I combine several pdfs into one document?

I just switched to Yosemite, and now I cannot figure out how to combine several pdfs into one document. I rarely need to do this, so I looked at past tutorials, but nothing seems to work. Help!

I don't understand - I've just tried it and it worked. I had 2 multi-page pdfs, opened both in Preview, followed my earlier post and saved the new pdf. The saved file is multi-page
Odd

Multiple delivery into One invoice

Dear All
Issue regarding multiple delivery into one invoice
1 When i am creating multiple delivery doc into one invoice, its possible for domestic[local sales] but when i am creating multiple delivery doc into one invoice for export it is not possible.
I have checked with the threads and tried it out with copy control with VBRK/VBRP [001/003/004]
Is there any specific customization for exports?
Regards
Sandeep Bhowmick

Dear Lakshmipati
As per your instruction i have done the split analysis:
split analysis:
Split due to different header data
Field Name :$00000001 $00000002
Number of foreign trade data : 0000000266 0000000267
The invoice is generating against one delv document, it could not be combined. In copy control any changes i have to make
Regards
Sandeep Bhowmick
Edited by: Sandeep Bhowmick on Jan 17, 2009 7:33 AM
Edited by: Sandeep Bhowmick on Jan 17, 2009 7:34 AM

Multiple deliveries getting combined into one invoice automatically by job

Hello All,
I'm facing issue, multiple deliveries are getting combined in one invoice automatically. The invoices are created by background jobs. It should not combine the multiple deliveries into one invoice ideally as it is being created by background jobs. Could any one please share what might be the cause of it.
Thanks in advance.
Regards,
Sumit

Hi
When you run the dialog or batch billing job the prgram SDBILLDL is triggered.
It simply reads the billing due index (VKDFS) and retrieves all due documents
for processing (internal table V60P_INPUT_VKDFIF)
The program in the standard processes 1000 entries at a time as required
and if each entry processed passes the split criteria (outlined in note 11162)
The system could in theory create one invoice for all 1000 entries picked up.
You see this processing here:
CALL FUNCTION 'SD_COLLECTIVE_RUN_EXECUTE'
LOOP AT V60P_INPUT_VKDFIF WHERE SELKZ NE SPACE.
    ON CHANGE OF V60P_INPUT_VKDFIF-KUNNR OR
                 V60P_INPUT_VKDFIF-VKORG OR
                 V60P_INPUT_VKDFIF-V_FKART.
      IF COUNTER > 0.
        CLEAR SY-CALLD.
        DELETE ADJACENT DUPLICATES FROM XKOMFK.
              PERFORM RV_INVOICE_CREATE                         >>>>>
As you see above, the system tries to bill all entries together
where the customer, sales org and billing type are the same.
It will do this 1000 times before it forces a split.
(you will also notice user exits here which can be used to change this
outcome)
Check note 11162 for the details of what header fields will cause a split.
As outlined previously you could use an item data transfer routine and the field
ZUKRI to force a split on your own terms.
Hope this helps explain the system behaviour
Kind regards
        PERFORM RV_INVOICE_CREATE                                       >>>>>>

How to from more than one delivery note - conversion into one invoice

Dear Experts,
How to from more than one delivery note - conversion into one invoice?
Thanks and best regards,
Wilson Hong

Dear Wilson Hong,
Single invoice for multiple deliveries will takes place based on these criterion
1.If you want single billing document for multiple deliveries these data should be same in all order for all items.
-> Payer
-> Inco term
-> Payment term
-> Actual GI Date from Delivery
-> Shipping Condition
-> Account Assignment Group
-> Exchange rate (in case of export sale order)
-> Foreign trade data.
2.In addition to this you need to maintain proper copy control settings between delivery and invoice.
Go to VTFL transaction input your delivery type and invoice type then go in to the item level settings here you find field Data VBRK/VBRP maintain this field with routine 3-Single invoice.
If the above data and settings are exists you can do single invoice for multiple deliveries.
I hope this will help you,
Regards,
Murali.

How can i combine several JFrame into one

I has several JFrames running with different tasks eg. using
various eventlistener and runnable. but when i try to combine all
these JFrames into one, compiling is ok but running always has
missing information. pls kindly advise the easiest method to use in
combining.
In addition, how can i display the JFrame in other
location instead of top left corner (starting point)?

yup, i used these layout FlowLayout, GridLayout and BorderLayout for
each of my JFrame and JPanel.

How to combine several files into one?

How to combine several pdf files into one?

Combine Files is a feature of Acrobat Pro. Because Reader Touch does not support the feature (yet), this is not the right forum for the question.
Here's the Acrobat forum for Creating, Editing & Exporting PDFs.
http://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs
You can ask questions and get help from Acrobat experts there. Good luck!

Combining several clips into one movie

what is the best way to combine several short video clips into one dvd?

you've read the manual...?
http://www.apple.com/support/imovie/tutorial/index.html

I want to combine several libraries on several drives into one library, Can this be done?*

I have several itunes libraries and playlists on several drives and directories. Is there an easy way to combine all these files into one library with one play list? Currently it takes up alot of space and I do not have all the media available readily useable.

Interesting. If it claims to do it, then it should; I didn't think it did. Importantly, Acrobat doesn't know how to read INDD files, except that it knows how to run InDesign to make a conversion. If there is any trouble running InDesign on that machine, it will affect it.
Still, I'd recommend exporting. With InDesign documents the export settings used are critical, and you'd want to control them rather than have some default.

Can Multiple Deliveries from multiple SOs be consilidated into One Invoice?

Hello Experts,
I would like to explore on consolidating multiple DOs to one
invoice. Please suggest in details as we need to consolidate multiple DOs into a single invoice.
Is there an option that as long as the customer master and PO no. are same for each line items, but in a different SO and DO, the collective billing can still work for us?
Please answer ASAP.
Regards,
Praveen

Hi Praveen ,
Mr,Subbu.. already mentined that what are the data need to be identical for the all items to get the single invoice in addition to that.
You have to look in to the Copy control settings also between your delivery document and billing document in VTFL transaction.
Go to VTFL transaction select your document ypes then go in to the item level copy control settings.
Here you can find the field Data VBRK/VBRP ,you need to maintain copying routine 3-Single invoice in this filed.
I hope it will help you,
Regards,
Murali.

How do I merge several documents into one?

Hello, I have several documents with images and text boxes that I would like to consolidate into one master document. When I copy and paste the formatting gets messed up. I tried creating separate sections but the formatting problem persists. Any help would be much appreciated! Thanks.

Hi Peter,
Yes, I should have been more specific with my question. First, I am using Pages version 5.2. Second, when I copy and paste one document to the other, the formatting of the images and the text boxes are not where they are supposed to be. Just to clarify, Document A consists of 7 pages of regular text plus 5 images and 2 text boxes. To Document A, I create a new section (beginning on page 8) to which I add Document B, again with regular text and this time with 10 images and 4 text boxes. On first page of Document B (page 8), the 10 images and 4 text boxes are layered one on top of the other. Note that Document A remains in tact as originally formatted. Also, I formatted all the images and text boxes to 'stay on page' on the original Document B, so I didn't expect them to move with a copy and paste into another document.
Let me know if you have a solution.
Best.

How do i move several documents into one on icloud

how do i move several documents on icloud into one document on icloud on my mac

Unless I'm misunderstanding you; copy & paste.

How do I put several DVDs into one DVD using iMovie?

I have made 5-6 small movies over the years using iMovie based on family skits. They average about 10 minutes each. I have them all burned to DVDs. I want to be able to put them all on one DVD instead of having 5-6 separate DVDs. I thought it would be a simple process to copy each DVD to my computer and then add them and burn to one DVD. When I duplicate the first DVD, it goes into a folder had has 2 files---neither of which I can open and play. Then I tried to open iMovie and import the DVD to iMovie. Can't get that to work. Then I went to the Disk Utility and was about to create an image of the DVD and did something I'm not sure of which magically at some point imported to the iMovie project I had created for this. I was able to get this process to work 3 times following the same steps (although I can't tell you why or what I was doing). But then it just stopped working for the last 3 DVDs even though I did the same thing. I don't have to use iMovie. I just want a simple way to combine DVDs into one DVD. Any help would be greatly appreciated as these are going to be Christmas gifts. Thanks.

If the iPhone is shown 'full-on' so the video doesn't have to be distorted then you could use 'Picture in Picture' in iMovie. See: http://help.apple.com/imovie/mac/10.0/#mova1aaa682b
If, on the other hand you have an oblique view of the iPhone (as is the case in the video you reference) the movie will have to be distorted in order for it to fit the screen of the iPhone in the picture and show the correct perspective. iMovie doesn't offer this flexibility and you would need to use Final Cut Pro.
Geoff.

Parking Several PO into One Invoice

Similar Messages

Maybe you are looking for