Parsing simple output help needed

Goal: for each hostname (mars, phobos, and deimos grab the value of state = in a variable so I work on it further.
I figured I'll need to use sed to find the target host name, then substitute the "linefeed and what I am assuming is a tab state =" to null and grab the state (in this case "free") into a variable. What I don't know how to do is: see the output of the command showing all non-printable characters so I can setup a grep or sed line. How is this accomplished in bash?
$ pbsnodes
mars
state = free
np = 4
ntype = cluster
status = rectime=1308479899,varattr=,jobs=0.localhost.localdomain,state=free,netload=1638547057,
gres=,loadave=2.69,ncpus=4,physmem=8195892kb,availmem=7172508kb,totmem=8195892kb,
idletime=24772,nusers=1,nsessions=5,sessions=1333 1349 1353 1388 9095,
uname=Linux mars 2.6.39-ck #1 SMP PREEMPT Sat Jun 18 14:19:01 EDT 2011 x86_64,opsys=linux
mom_service_port = 15002
mom_manager_port = 15003
gpus = 2
phobos
state = free
np = 2
ntype = cluster
status = rectime=1308479933,varattr=,jobs=,state=free,netload=1085755815,
gres=,loadave=2.84,ncpus=2,physmem=4019704kb,availmem=5753552kb,totmem=6116852kb,
idletime=7324,nusers=2,nsessions=6,sessions=1565 1562 1691 1716 1737 1851,
uname=Linux phobos 2.6.37-ck #1 SMP PREEMPT Sun Apr 3 17:16:35 EDT 2011 x86_64,opsys=linux
mom_service_port = 15002
mom_manager_port = 15003
gpus = 1
deimos
state = free
np = 2
ntype = cluster
status = rectime=1308479890,varattr=,jobs=2.localhost.localdomain,state=free,netload=527239670,
gres=,loadave=0.52,ncpus=2,physmem=4057808kb,availmem=3955624kb,totmem=4057808kb,
idletime=644,nusers=1,nsessions=1,sessions=865,
uname=Linux deimos 2.6.39-ck #1 SMP PREEMPT Sat Jun 11 12:36:21 EDT 2011 x86_64,opsys=linux
mom_service_port = 15002
mom_manager_port = 15003
gpus = 1
Last edited by graysky (2011-06-20 21:00:53)

quigybo wrote:
graysky wrote:What I don't know how to do is: see the output of the command showing all non-printable characters so I can setup a grep or sed line. How is this accomplished in bash?
$ pbsnodes | od -c
Or 'cat -A'.

Similar Messages

Simple button help needed!

I want to make a simple round button that glows when you
mouse over it and depresses when you click it.
Apparently to do this I need to use Filters to make the glow
and bevels. But Filtersonly work on movie clips, buttons and text.
So I make a circle and convert it into a button symbol
(Btn1). Then I make another button symbol (Btn2) and use the first
button symbol (Btn 1) on the Up Over and Down frames of Btn 2.
Assorted Filters are applied to Btn 1 on the Up Over and Down
frames to get the effects I want.
I test the button (Btn2) using Enable Simple Buttons. It
works perfectly - glows on mouse over and depresses on click. Then
I try Test Movie -- and the button doesn't work!!!
Not does it work when exported as a SWF file!!!
I watched a tutorial video that came with my Flash Pro 8
Hands-On-Training (HOT) book and he used pretty much the same
technique -- except he only tested his button with Enable Simple
Buttons. I'll bet my house his didn't work with Test Movie either!
The stupid thing, is I was just able to achieve exactly what
I wanted very quickly using LiveMotion 2!
What is wrong here? Why is it so impossible to create a glow
button in Flash? Why has it been easy in Live Motion for years?
All help appreciated!
Thanks
craig

I thought the nesting button situation might be the problem
BUT there is no other way to apply Filters to Up, Down, etc. Also,
a freaking tutorial book described that as a valid method, but
obviously it ain't.
I tried using movieclips as well but basically had the same
problem.
I mentioned LiveMotion 2 because that ancient program can do
easily what Flash Pro 8 seems incapable of.
What is the logic behind not allowing Filters to be applied
to simple graphics? It's absurd!
There's got to be a way...

InDesign CS 5 vs Illustrator CS 5 large format output help needed

Ok here's the deal, I work in a small agency in Dubai, we have many nationalities and over here so, so many people use Illustrator for everything, and it drives me up the wall.
Anyway we had 40 2x3 metre boards to be designed and the lcient asked for them to be delivered as Illustrator EPS files. So each one would have to be done seperately with high res images in and this took days. Whereas in InDEsign it would take a quarter of that time.
They sare saying if I supply high res PDFs from InDesign the quality isn't as good. Something to do with rasterization?
Does anyoen know if this is true as I need some hard facts abotu this before I can tackle my boss and the client next time and eventually get everyone using InDesign instead of Illustrator, which is pretty stupid.
One more thing, one of the guys here did a 3 metre high board in Photoshop and it came out fine (if not a massive file) and he says he knows for a fact if it was done in InDesign it wouldn't output as well.
Any thoughts or help would be greatly received,
Thanks!
Dave

ComputerGeekette,
I don't doubt for one second that this is indeed your experience and that you have settled into what I can best describe as a very degenerate workflow in order to get your job done under the conditions you describe.
Having said that, I must say that your experience and the fact that you believe that this is the best workflow you can achieve given the conditions is an exceptionally sad commentary on the state of the graphic arts industry in general and the printing industry in particular. The workflow you describe is a “lowest common denominator” workflow that almost guarantees that in most cases in which you have anything other than pure raster imagery to print, you will get results that are not optimal.
You should be able to use PDF/X-4 files as the means of passing artwork from your clients to you and then subsequently from you to your printers. Source files (i.e., native Illustrator, InDesign, and Photoshop files as well as assets such as imagery and fonts) should not be the currency of the realm here.
When I need to go “outside” to print (for anything my fleet of laser printers and wide format printers can't handle including offset printing jobs), I typically go and interview the print service provider and provide a sample job to print using a PDF/X-4 job with live transparency and color managment. If they cannot handle it in their normal workflow or cannot adjust to the twenty first century very rapidly, I move on to another print service provider. For better or worse, there are plenty of very hungry printers out there and at least some of them realize that unless they learn to deal with modern workflows, they will be history like the many thousands of other such printers that have gone belly-up over the last half dozen years!
- Dov

Simple viewer help needed please

I need help with this exact problem please which was posted by Kirby on 9th Feb
I can't save into the idisk/web folder although I can copy the files over after they refuse to open (if that means anything)...
"This is for Old Toad. I checked out your demo site which is awesome. I read the tutorial,
Examples of SimpleViewer and Flash Album Exporter Slideshows (plugins for iPhoto)
ADDED USING HTML SNIPPET AND IFRAME
This was great but I am still running into a roadblock. The issue seems to be that in the URL that is given on your demo page...
http://web.me.com/youraccountname/slideshow folder/index.html
....it says to enter my account name (which I did).
I am uploading the simple-viewer folder to my iDisk using the Go menu but inside of the Web/Sites folder there is no folder called Slideshow Folder. So am I right in thinking that the URL has nothing to point too because that folder isn't there? Why isn't it there? And is there anything I can do to solve this? Is there another place the simple-viewer folder should be on my idisk?"

Hi:
When you create the simpleviewer slideshow with iPhoto's plugin there should be a folder created on your HD that contains the items seen in the screenshot below:
The folder was named simpleviewer because that's what I named it during the export from iPhoto. That's the same folder as I refer to as "Slideshow folder". It can be whatever you name it when exporting from iPhoto. Upload that folder to your iDisk/Web/Sites folder as shown below:
In the iFrame code use the following URL to the index.html file inside the simpleviewer folder:
http://web.me.com/YourMMe_AccountName/simplerviewer/index.html
That should do it.

Simple Query Help Needed

I must not be in the right mode today, because this is giving
me a hard time...
I have a SQL Server database with 250,000 records. Each
record represents a medical visit.
Each record has 25 fields that contain patient diagnosis. A
visit may show one diagnosis, or it may show as many as 25. Any
specific diagnosis (250.00 for example) may appear in a field
called Code1, or a field called Code2.... Code25.
There are a total of about 500 patients that make up the
250,000 visits.
What I need is a report that shows each DISTINCT diagnosis,
and a listing (and count) of people that have been assigned that
diagnosis.
My thought is to first query the table to arrive at the
unique list of diagnosis codes. Then, in a nested loop, query the
database to see who has been assigned that code, and how many
times.
This strikes me as an incredibly database intensive query,
however.
What is teh correct way to do this?

The correct way to do this is to normalize your database.
Rather than having 25 separate colums that essentially
contain the same data (different codes), break that out into a
separate table.
Patient
patientid
Visit
patientid (foreign key referencing Patient)
visitid
Diagnosis
visitid (foreign key referencing visitid in Visit)
diagnosiscode
order (if the 1-25 ordering of diagnosis codes is important)
Once you correct your datamodel, what you're trying to do
becomes simple.
-- get all diagnosis codes
select distinct(diagnosiscode) from diagnosis
-- get a breakdown of diagnosis codes, patients, and counts
for that diagnosis
select diagnosiscode, patient.name, count(diagnosiscode) from
patient left join visit on (patient.patientid =
visit.patientid)
left join diagnosis on (visit.visitid = diagnosis.visitid)
group by diagnosiscode, patient.name

(Data Structures) Position (in Lists) ...simple - Urgent help needed!!!

I know that Position is the abstract data type and that it supports only one method - element() (that returns the element stored in this position).. Now when I wish to implement a List (with doubly linked list) using the Interface List...In the Interface List there are quite few methods to implement , however, few of them require Position parameter...And this is where I am getting confused..What is the Position parameter? A number? or? Here is a sample code
//Node class for implementing a Doubly linked list
Class DoublyNode implements Position
{ public DoublyNode prev, next;
public Object element
//constructor
public Dnode()
{ prev = null
next = null
element = null
public Object element(){
return element;
Class NodeList implements List{
// bunch of methods and variables
public Position before(Position p) // What is Position parameter? a position number? or what?
{ DoublyNode v = (DoublyNode)p;
DoublyNode prev = v.prev;
return prev;
Now I know since DoublyNode implements Position, we can cast a position to a node, but what is that Position parameter? Can anybody explain this minor detail to me? Or how do these Position parameters work in programing? All I know is, given a position parameter (what ?) the Doubly linked list will instantly locate the appropriate node (how) and you can cast it to a node and return the node...but how does this Position work?
I am aware of the fact that everytime you insert in the list , that inserted element gets a position (a number?) how do I refer/catch back that node ? Via position (number)?
Please Help....
I appreciate it a lot!!!

There's no standard Java class called Position, at least none that has anything to do with lists or collections. So this must be a class or interface that somebody else wrote. At any rate, a Position parameter needs a Position object, obvious as that may sound. How do you create a Position object? Somebody with documentation of the Position class or interface might be able to help here -- is this homework?

P35 Platinum simple question help needed!

Helo......
Take a look into this picture:
http://www.subir-imagenes.com/imagenes/de5066b3c6.jpg
mirror: http://img514.imageshack.us/my.php?image=p35platinumep8.jpg
screws holes: http://www.hardwaresecrets.com/fullimage.php?image=7420
I have seen this 2 holes placed at copper passive cooler system, just besides the memory, and at a height allowing to put a 80mm fan (I guess but not tried) just almost "touching" memory modules....
For me, it would be great since my Q6600 CPU use to be at nearly 50º with zalman 9700, and motherboard gives 45º usually...... memory is very hot... 4 modules of 2.0v kingstom hyperx 4-4-4-12 for 4Gbs........
Someone tried to put there a fan????????
Are these holes specially there to do that way??????
If you put a fan there, you would do it extracting air from memory modules, or just pushing air to them?????
Thanks!

Quote from: Maesus on 26-September-07, 04:18:31
2 screw holes? got picture?
isn't those 2 screw holes to mount the extended heatsink beside the DIMM?
mmm.......
I refer to this "supposed to be" screw holes, as they seems it to me at least...
http://img170.imageshack.us/my.php?image=screwholesef4.jpg
You talk about a "extended heatsink beside DIMM"..... I cannot find any documentation about an extended heatsink anywhere (maybe a bit blind, so, if you were so kind, can you please tell me something about it or maybe give a simple link for it?? I wish to refrigerate better my memory modules and chipset with my zalman 9700, and this holes just over there without any purpose (for me) are getting me crazy...
Also I tried to give airflow to the memory modules through an 80mm fan situated on the thermaltake shark chasis (Mc Giver wouldn´t do it better) and the result is Zalman 9700 is taking all the air from the fresh airflow of the new fan besides, resulting in cooler CPU, but hotter memory and chipset.... pfffffffffffffffff............

Very simple calculation help needed.

I am a non-techie person being tasked with creating a form. Java? Thats coffee right?
see what I mean .
Anyway I need to have a form calculate the difference between two dollar amounts.
They are: Previous Check Amount ____________
Current Check Amount __________
Difference(+/-) _____________
I looked at doing the calculation via the value field on the calculate tab. But I see I cannot do that unless I choose the Custom Calculation Script and writing it myself. I am not sure how to do that. If I could send cookies to my savior I would.
Thanks!!

Gilad,
Thanks for the reply,
The fields are "Previous Check Amount" and "Current Check Amount" and I need to calculate whatever (+/-) difference there would be between the two......

Simple question, help needed? Finder icons

In finder have lost the music folder on the left sidbar(the one beside 'pictures' and 'movies' etc..) how do i get this folder back with the nice default music icon?

Ribbs,
I should have paid more attention your original question.
Sorry for pointing out the obvious.
Removal and replacement of the Music Folder from the Sidebar on my system always results in the Treble Cleff icon representing the Music Folder. Seems like there might be some kind of cache or plist corruption problem with your system.
I would advise that you read, Maintaining Mac OS X and Running the Mac OS X maintenance scripts by Dr. Smoke for some troubleshooting tips.
;~)

Help needed : Extension manager cs6 not listing products

Help needed to Adobe extension manager cs6 to show all my cs6 products
I downloaded Extension manager from here Adobe - Exchange : Download the Adobe Extension Manager
My Computer windows xp 32bit
My Photosop version cs6
My Dreamweaver version cs6
I installed photoshop here : C:\Program Files\Adobe\Adobe Dreamweaver CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="$sharedextensionfolder">$shareddatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration/Extensions</Data>
        <Data key="$dreamweaver">$installfolder</Data>
        <Data key="$dreamweaver/Configuration">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration</Data>
        <Data key="$UserBinfolder">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE</Data>
        <Data key="NeedOperationNotification">true</Data>
        <Data key="QuitScript">dw.quitApplication()</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">DRWV</Data>
        <Data key="ProductVersion">12.0</Data>
        <Data key="Bit">32</Data>
<Data key="DefaultLocale">en_US</Data>
</VariableForExMan>
</Configuration>
Extension manager installed here : C:\Program Files\Adobe\Adobe Extension Manager CS6
Photoshop Installed here: C:\Program Files\Adobe\Adobe Photoshop CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension Manager</Data>
        <Data key="$photoshopappfolder">$installfolder</Data>
        <Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
        <Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
        <Data key="$platform">Win</Data>
        <Data key="$actions">$presetsfolder/Actions</Data>
        <Data key="$blackandwhite">$presetsfolder/Black and White</Data>
        <Data key="$brushes">$presetsfolder/Brushes</Data>
        <Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
        <Data key="$colorbooks">$presetsfolder/Color Books</Data>
        <Data key="$colorrange">$presetsfolder/Color Range</Data>
        <Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
        <Data key="$contours">$presetsfolder/Contours</Data>
        <Data key="$curves">$presetsfolder/Curves</Data>
        <Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
        <Data key="$duotones">$presetsfolder/Duotones</Data>
        <Data key="$exposure">$presetsfolder/Exposure</Data>
        <Data key="$gradients">$presetsfolder/Gradients</Data>
        <Data key="$huesat">$presetsfolder/Hue Sat</Data>
        <Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
        <Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
        <Data key="$layouts">$presetsfolder/Layouts</Data>
        <Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
        <Data key="$levels">$presetsfolder/Levels</Data>
        <Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
        <Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
        <Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
        <Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output Settings</Data>
        <Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
        <Data key="$patterns">$presetsfolder/Patterns</Data>
        <Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
        <Data key="$replacecolor">$presetsfolder/Replace Color</Data>
        <Data key="$scripts">$presetsfolder/Scripts</Data>
        <Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
        <Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
        <Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
        <Data key="$styles">$presetsfolder/Styles</Data>
        <Data key="$textures">$presetsfolder/Textures</Data>
        <Data key="$tools">$presetsfolder/Tools</Data>
        <Data key="$variations">$presetsfolder/Variations</Data>
        <Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
        <Data key="$workspaces">$presetsfolder/Workspaces</Data>
        <Data key="$zoomify">$presetsfolder/Zoomify</Data>
     <Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
     <Data key="$lights">$presetsfolder/Lights</Data>
     <Data key="$materials">$presetsfolder/Materials</Data>
     <Data key="$meshes">$presetsfolder/Meshes</Data>
     <Data key="$rendersettings">$presetsfolder/Render Settings</Data>
     <Data key="$volumes">$presetsfolder/Volumes</Data>
     <Data key="$widgets">$presetsfolder/Widgets</Data>
        <Data key="$localesfolder">$photoshopappfolder/Locales</Data>
        <Data key="$additionalplugins">$localesfolder/$LOCALE/Additional Plug-ins</Data>
        <Data key="$additionalpresets">$localesfolder/$LOCALE/Additional Presets</Data>
        <Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional Presets/$platform/Keyboard Shortcuts</Data>
        <Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional Presets/$platform/Menu Customization</Data>
        <Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional Presets/$platform/Workspaces</Data>
        <Data key="$automate">$pluginsfolder/Automate</Data>
        <Data key="$digimarc">$pluginsfolder/Digimarc</Data>
        <Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
        <Data key="$effects">$pluginsfolder/Effects</Data>
        <Data key="$extensions">$pluginsfolder/Extensions</Data>
        <Data key="$fileformats">$pluginsfolder/File Formats</Data>
        <Data key="$filters">$pluginsfolder/Filters</Data>
        <Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
        <Data key="$importexport">$pluginsfolder/Import-Export</Data>
        <Data key="$measurements">$pluginsfolder/Measurements</Data>
        <Data key="$panels">$pluginsfolder/Panels</Data>
        <Data key="$parser">$pluginsfolder/Parser</Data>
     <Data key="$3dengines">$pluginsfolder/3D Engines</Data>
        <Data key="$lightingstyles">$pluginsfolder/Filters/Lighting Styles</Data>
        <Data key="$matlab">$photoshopappfolder/MATLAB</Data>
        <Data key="UserExtensionFolder">$photoshopappfolder</Data>
        <Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop CS6/Configuration</Data>
        <Data key="DisplayName">Photoshop CS6 32</Data>
        <Data key="ProductName">Photoshop32</Data>
        <Data key="FamilyName">Photoshop</Data>
        <Data key="ProductVersion">13.0</Data>
        <Data key="IconPath">Configuration/PS_exman_24px.png</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">PHSP</Data>
        <Data key="Bit">32</Data>
    </VariableForExMan>
</Configuration>
                                                                    Please someone help me i cant install any photoshop extension because of this issue,,,

Waiting for your reply ...thanks
Here is the results
I installed photoshopcs6 illustrator cs6 dreamweaver cs6 illustrator cs6 in the system , But nothing seems
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Path
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 15:55:49
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 55ms
Last pump = 62ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=0ms, left=16ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[15:55:49]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 15:55:50
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[15:55:49]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 16:05:49
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 1
Connector = PCD
Installed: 0
Running: 0
exman-6.0:
Path = C:\Program Files\Adobe\Adobe Extension Manager CS6\Adobe Extension Manager CS6.exe
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.exe
Installed: 1
Running: 0
Groups = (no groups defined)

I cannot configure yahoo small business after upgrading to Mavericks Help needed

Hi Guys,
it is as simple as that:
I cannot configure yahoo small business after upgrading to Mavericks Help needed
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed for grouping.

Hi,
    Help needed .
I have an internal table having 6 .
Ex :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 10    10
a     aa    12    p1 20    20
b     aa    11    p2 30    30
b     aa    12    p2 40    30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 30    30.
b     aa    11    p2 70    60.
can anyone help me.How to do this..?
Thanks

Here you go
DATA:
BEGIN OF cur_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(2)     TYPE c,
    f6(2)     TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
    f1        TYPE c,
    f4(2)     TYPE c,
    f5        TYPE p,
    f6        TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(5)     TYPE c,
    f6(5)     TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
    MOVE-CORRESPONDING cur_tab TO sum_tab.
    COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
    READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                f4 = sum_tab-f4.
    IF sy-subrc NE 0.
      WRITE:/ 'Something went very wrong'.
      CONTINUE.
    ENDIF.
    MOVE-CORRESPONDING cur_tab TO final_tab.
    MOVE-CORRESPONDING sum_tab TO final_tab.
    APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
    WRITE:/1 final_tab-f1,
          AT 5 final_tab-f2,
          AT 10 final_tab-f3,
          AT 15 final_tab-f4,
          AT 20 final_tab-f5,
          AT 25 final_tab-f6.
ENDLOOP.
and the output
a   aa   11   p1     30   30
b   aa   11   p2     70   60

Help needed

Help needed
1. When we use USING clause in execute immediate does it hard parse ?
2. Is it better to use values stored in SYS_CONTEXT or to use USING clause in Execute Immediate ?
3. In Dynamic SQL, if i use SYS_CONTEXT does it Hard Parse or Soft Parse ?
Edited by: Prathamesh on Jun 22, 2010 5:19 AM

Prathamesh wrote:
1. When we use USING clause in execute immediate does it hard parse ?Only the first time.
2. Is it better to use values stored in SYS_CONTEXT or to use USING clause in Execute Immediate ?I think it depends, Tom would say the latter
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1669972300346534908
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1288401763279

Parsing simple output help needed

Similar Messages

Maybe you are looking for