Part 2:Store The Current Session id in an Odi Variable

Hi,
I want to store the current session id in an odi variable.So I write the code bellow in refreshing tab of the variable.
SELECT <%=odiRef.getSession("SESS_NO")%> FROM DUAL
I took a oracle schema which points to oracle target data server logical schema.
When I validate the query(click on green tick mark) it shows an error(ORA-00936: missing expression) like this:
java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:947)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3823)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1671)
at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java:645)
at com.sunopsis.graphical.frame.edit.EditFrameSnpVar.handleTestVariableQueryAction(EditFrameSnpVar.java:1095)
at com.sunopsis.graphical.frame.edit.EditFrameSnpVar.access$3(EditFrameSnpVar.java:1074)
at com.sunopsis.graphical.frame.edit.EditFrameSnpVar$4.actionPerformed(EditFrameSnpVar.java:492)
at com.sunopsis.graphical.component.toolbar.OdiTextAreaToolbarAction.executeAction(OdiTextAreaToolbarAction.java:125)
at com.sunopsis.graphical.component.toolbar.AbstractOdiToolbarAction.actionPerformed(AbstractOdiToolbarAction.java:203)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:273)
at java.awt.Component.processMouseEvent(Component.java:6297)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3275)
at java.awt.Component.processEvent(Component.java:6062)
at java.awt.Container.processEvent(Container.java:2039)
at java.awt.Component.dispatchEventImpl(Component.java:4660)
at java.awt.Container.dispatchEventImpl(Container.java:2097)
at java.awt.Component.dispatchEvent(Component.java:4488)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4236)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4166)
at java.awt.Container.dispatchEventImpl(Container.java:2083)
at java.awt.Window.dispatchEventImpl(Window.java:2489)
at java.awt.Component.dispatchEvent(Component.java:4488)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:668)
at java.awt.EventQueue.access$400(EventQueue.java:81)
at java.awt.EventQueue$2.run(EventQueue.java:627)
at java.awt.EventQueue$2.run(EventQueue.java:625)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$3.run(EventQueue.java:641)
at java.awt.EventQueue$3.run(EventQueue.java:639)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:638)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
So please help and let me know what will be the correct query.
Thanks
Papai
Edited by: Papai on Nov 20, 2012 12:30 AM

Papai wrote:
Hi,
I want to store the current session id in an odi variable.So I write the code bellow in refreshing tab of the variable.
SELECT <%=odiRef.getSession("SESS_NO")%> FROM DUAL
I took a oracle schema which points to oracle target data server logical schema.
When I validate the query(click on green tick mark) it shows an error(ORA-00936: missing expression) like this:
Validate button is only for SQL statement.
API call can not be validated using validate button .
java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:947)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3823)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1671)
at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java:645)
at com.sunopsis.graphical.frame.edit.EditFrameSnpVar.handleTestVariableQueryAction(EditFrameSnpVar.java:1095)
at com.sunopsis.graphical.frame.edit.EditFrameSnpVar.access$3(EditFrameSnpVar.java:1074)
at com.sunopsis.graphical.frame.edit.EditFrameSnpVar$4.actionPerformed(EditFrameSnpVar.java:492)
at com.sunopsis.graphical.component.toolbar.OdiTextAreaToolbarAction.executeAction(OdiTextAreaToolbarAction.java:125)
at com.sunopsis.graphical.component.toolbar.AbstractOdiToolbarAction.actionPerformed(AbstractOdiToolbarAction.java:203)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:273)
at java.awt.Component.processMouseEvent(Component.java:6297)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3275)
at java.awt.Component.processEvent(Component.java:6062)
at java.awt.Container.processEvent(Container.java:2039)
at java.awt.Component.dispatchEventImpl(Component.java:4660)
at java.awt.Container.dispatchEventImpl(Container.java:2097)
at java.awt.Component.dispatchEvent(Component.java:4488)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4236)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4166)
at java.awt.Container.dispatchEventImpl(Container.java:2083)
at java.awt.Window.dispatchEventImpl(Window.java:2489)
at java.awt.Component.dispatchEvent(Component.java:4488)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:668)
at java.awt.EventQueue.access$400(EventQueue.java:81)
at java.awt.EventQueue$2.run(EventQueue.java:627)
at java.awt.EventQueue$2.run(EventQueue.java:625)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$3.run(EventQueue.java:641)
at java.awt.EventQueue$3.run(EventQueue.java:639)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:638)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
So please help and let me know what will be the correct query.
Thanks
Papai
Edited by: Papai on Nov 20, 2012 12:30 AM

Similar Messages

How to get the transaction_id from the current session of the current trx?

Hello Gurus,
How can get the hr_api_transactions.transaction_id from the current session to use it in my SQL script in VO.xml?
I don't know if I can get the item_type, item_key from the current self service session in iRecruitment? to use it in hr_transactions_ss.get_transaction_id(p_item_type, p_item_key)
I saw something icx_sec.getID(icx_sec.g_transaction_id)!
Can I use this in the where clause of the SQL part of my VO extension?
Thanks for all the help!
FR

Hi!
Try this thread:
http://help.sap.com/saphelp_nw04s/helpdata/EN/80/b2dd3a6dac703be10000000a11405a/frameset.htm
brgs Ziggy

Download a file on a separate page without linking it with the current session

Hi,
Here is my problem:
In a JSP, the client chooses a link referring to a document which is contained in a blob on the database. This JSP calls a servlet which retrieves the PDF from the blob. I can send this PDF on a separate page if the <a href> on the JSP specifies TARGET=BLANK. But if the client closes the new window, the server doesn't recognizes the session that was going on on the JSP anymore. It looks like the response sent with the PDF takes the pole of the session and the first pending page (the JSP) is not associated anymore with the session.
There must be a way to send a second page without associating it with the current session.
Another way to solve my problem would be to send the PDF as part of a regular html page. I know this can be done, but I don't know how to do it.
Any suggestion?
Thanks
Jean Vaillancourt, Montreal

When opening the new window use child instead of blank. That should keep the session intact in the old window.

How to find out the roles set for the current session?

Hi,
I wanted to find out the roles set to the current session. Which system view or table gives this info?
Thanks
Seshu

SELECT * FROM session_roles

Getting an error in KPI Modeler as "{"customMessage":"failed to detect the sap language of the current session language","status":500}"

Hi Experts,
We have installed UISKPI01 in SAP NetWeaver Gateway System for Fiori Analytical Apps (KPI modeler is necessary to model the KPI) but while trying to create and Save the Group, we are Getting an error in KPI Modeler as "{"customMessage":"failed to detect the sap language of the current session language","status":500}". Similarly, when we are trying to edit the existing KPI template and assigning the Variants and Evaluations, we are facing the same error as failed to detect the sap language of the current session language","status":500.
Any idea on above error?
Thanking you,
~ Mahendra

Hello Mahendra,
Check if you have entries in the T002 table of SAP_SSB schema.
If not follow the steps mentioned in the admin guide of SAP Smart business to populate data.
This should resolve this issue.
Note: My assumption is that, you are accessing the KPI modeler in English Language.
Thanks,
Debasish

How can I get a list of active savepoints for the current session?

Hi,
In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
"Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"
So how can I get a list of active savepoints for the current session?
Could you please also let me know if there is any better way to debug this issue.
Appreciate any quick response as the issue is very critical.
Thanks,
Soma

user776523 wrote:
Hi,
In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
"Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"It sounds like there's an execution path in the code where the SAVEPOINT is never issued.
There is no way to get a list of active savepoints. Is this your code or a "canned" procedure? If it is your code you can go through the code looking for answers, possibly tracing execution using DBMS_OUTPUT.PUT_LINE or writing messages to a log table. If its a "canned" procedure you may need to open an SR with Oracle

Get the current session in a Session Bean?

Hi,
I know how to get the current session from a Servlet, you use request.getSession().
However I need access to the current session from a Session Bean. As far as I know, only Servlets have a request object, so I can't use request.getSession()
Any ideas on how to access the session from a Session Bean?
Thanks!

Hi,
I managed to get around the problem by using a JSP to
pass a session object to a method in my session bean.
ThanksJust be aware that the serialized Session object can be a huge stream to remotely pass to your bean...
Kexkey

Open URL Ivew in a new window without loosing the current session in Portal

Hi All ,
I have a requirement in which there are two tabs in portal which are two roles A and B
Where each tabs(role) has an URL Iview attached to it.
Current I am in Window 1 - Tab A
When I click on Tab B, it has to open in a new window (Window2) with Tab B content , where as the previous session (Window1)is not lost and Window1 has to show Tab A only.
Kindly help me out on how to implement it .
Thanks in Advance

Hi All ,
Thanks for the reply and sorry for the late response.
As per Prashant I made the setting .. When I click Tab 2 in Window 1, opens a new window 2 with Tab 2 iview .but the window 1 is hilighted with Tab B and the current session on Tab A is lost . As per the reqiirement I should not loose the focus on Tab A in Window1.
also Kindly let me know how and where can I sent the EPCM paramenter for the URL Iview .
Thanks in Advance
Edited by: Prasanna Kumar on Feb 21, 2012 12:42 PM

Where's the button which shows the browsing history of the current session?

On previous versions there was right next to the back button a small down-upwards pointing button which opened the whole browsing history of the current session. It was helpful to pick the page (site) you needed in an instant instead of going through all pages back in a tedious manner. What's up with this new Firefox version? It has serious issues,for Christ's sake...!

Thank you! I didn't know about the fact that one can open such a window with a right click on the back button =O oh well,I just installed the add-on since I'm used to this upward-down pointing arrow =) Thanks a lot! Firefox seriously messed it up this time,but thanks to guys like you I will stay for a little while longer with our fiery fox friend =)

Where does blackberry torch stores the current wallpaper image?

Where does blackberry torch stores the current wallpaper image?

In Media > Pictures > Specific Folder Name as per Theme name.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Set "serveroutput on" for the current session.

I'm still new to PL/SQL and I use "*SET SERVEROUTPUT ON SIZE 100000"* always before I run a PL program block to get dbms_output. I really need to know why should we specify a size in this line & what that size will be applied for. Also I need to know whether there is any possibility to set serveroutput enabled for the current session, rather than running this code line before each and every PL block.
I Tried *"ALTER SESSION SET SERVEROUTPUT ON SIZE 1000000"* ; But it was not successfully executed.
Thanks!

michaels2 wrote:
I will have to always write it above my PL block, and run this line with that PL block.before the first dbms_output call you can also issue dbms_output.enable() :
declare
my_var varchar(30);
begin
my_var:='&input';
dbms_output.enable();
for i in 1..5 loop
dbms_output.put_line('Hello '||my_var);
end loop;
end;
/This should always work, irrespective of how you SET SERVEROUT in sql*plus.Nope.
SQL> ed
Wrote file afiedt.buf
1 begin
2 dbms_output.enable();
3 dbms_output.put_line('TEST');
4* end;
SQL> /
PL/SQL procedure successfully completed.
SQL>dbms_output.enable is used to enable the output buffer (or set the size of it) on the server side of things. It can't influence the client application into retrieving and displaying the output from the buffer, even if that is SQL*Plus. ;)

Hi.I want to trap the table namebeing modified in the current session,How d

Hi i want to trap the object being modified in the current session and log it into the table.How do i do it?

Checkout out the system event "ora_dict_obj_name" in http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96590/adg14evt.htm

How to get the current session details in windows phone 8 when using Facebook ,Google and Microsoft login

I want to get the session details like access token , provider etc on a page (ExamplePage.xaml.cs) , i used the following example from nokia developers community (link)
and implemented the login part but how can i get session details so that i can send it to my API
The SessionService class manages the session on facebook,google,microsoft login:
/// <summary>
/// The service session.
/// </summary>
public class SessionService : ISessionService
private readonly IApplicationSettingsService _applicationSettings;
private readonly IFacebookService _facebookService;
private readonly IMicrosoftService _microsoftService;
private readonly IGoogleService _googleService;
private readonly ILogManager _logManager;
/// <summary>
/// Initializes a new instance of the <see cref="SessionService" /> class.
/// </summary>
/// <param name="applicationSettings">The application settings.</param>
/// <param name="facebookService">The facebook service.</param>
/// <param name="microsoftService">The microsoft service.</param>
/// <param name="googleService">The google service.</param>
/// <param name="logManager">The log manager.</param>
public SessionService(IApplicationSettingsService applicationSettings,
IFacebookService facebookService,
IMicrosoftService microsoftService,
IGoogleService googleService, ILogManager logManager)
_applicationSettings = applicationSettings;
_facebookService = facebookService;
_microsoftService = microsoftService;
_googleService = googleService;
_logManager = logManager;
/// <summary>
/// Gets the session.
/// </summary>
/// <returns>The session object.</returns>
public Session GetSession()
var expiryValue = DateTime.MinValue;
string expiryTicks = LoadEncryptedSettingValue("session_expiredate");
if (!string.IsNullOrWhiteSpace(expiryTicks))
long expiryTicksValue;
if (long.TryParse(expiryTicks, out expiryTicksValue))
expiryValue = new DateTime(expiryTicksValue);
var session = new Session
AccessToken = LoadEncryptedSettingValue("session_token"),
Id = LoadEncryptedSettingValue("session_id"),
ExpireDate = expiryValue,
Provider = LoadEncryptedSettingValue("session_provider")
_applicationSettings.Set(Constants.LoginToken, true);
_applicationSettings.Save();
return session;
/// <summary>
/// The save session.
/// </summary>
/// <param name="session">
/// The session.
/// </param>
private void Save(Session session)
SaveEncryptedSettingValue("session_token", session.AccessToken);
SaveEncryptedSettingValue("session_id", session.Id);
SaveEncryptedSettingValue("session_expiredate", session.ExpireDate.Ticks.ToString(CultureInfo.InvariantCulture));
SaveEncryptedSettingValue("session_provider", session.Provider);
_applicationSettings.Set(Constants.LoginToken, true);
_applicationSettings.Save();
/// <summary>
/// The clean session.
/// </summary>
private void CleanSession()
_applicationSettings.Reset("session_token");
_applicationSettings.Reset("session_id");
_applicationSettings.Reset("session_expiredate");
_applicationSettings.Reset("session_provider");
_applicationSettings.Reset(Constants.LoginToken);
_applicationSettings.Save();
/// <summary>
/// The login async.
/// </summary>
/// <param name="provider">
/// The provider.
/// </param>
/// <returns>
/// The <see cref="Task"/> object.
/// </returns>
public async Task<bool> LoginAsync(string provider)
Exception exception = null;
try
Session session = null;
switch (provider)
case Constants.FacebookProvider:
session = await _facebookService.LoginAsync();
break;
case Constants.MicrosoftProvider:
session = await _microsoftService.LoginAsync();
break;
case Constants.GoogleProvider:
session = await _googleService.LoginAsync();
break;
if (session != null)
Save(session);
return true;
catch (InvalidOperationException e)
throw;
catch (Exception ex)
exception = ex;
await _logManager.LogAsync(exception);
return false;
/// <summary>
/// The logout.
/// </summary>
public async void Logout()
Exception exception = null;
try
var session = GetSession();
switch (session.Provider)
case Constants.FacebookProvider:
_facebookService.Logout();
break;
case Constants.MicrosoftProvider:
_microsoftService.Logout();
break;
case Constants.GoogleProvider:
_googleService.Logout();
break;
CleanSession();
catch (Exception ex)
exception = ex;
if (exception != null)
await _logManager.LogAsync(exception);
/// <summary>
/// Loads an encrypted setting value for a given key.
/// </summary>
/// <param name="key">
/// The key to load.
/// </param>
/// <returns>
/// The value of the key.
/// </returns>
private string LoadEncryptedSettingValue(string key)
string value = null;
var protectedBytes = _applicationSettings.Get<byte[]>(key);
if (protectedBytes != null)
byte[] valueBytes = ProtectedData.Unprotect(protectedBytes, null);
value = Encoding.UTF8.GetString(valueBytes, 0, valueBytes.Length);
return value;
/// <summary>
/// Saves a setting value against a given key, encrypted.
/// </summary>
/// <param name="key">
/// The key to save against.
/// </param>
/// <param name="value">
/// The value to save against.
/// </param>
/// <exception cref="System.ArgumentOutOfRangeException">
/// The key or value provided is unexpected.
/// </exception>
private void SaveEncryptedSettingValue(string key, string value)
if (!string.IsNullOrWhiteSpace(key) && !string.IsNullOrWhiteSpace(value))
byte[] valueBytes = Encoding.UTF8.GetBytes(value);
// Encrypt the value by using the Protect() method.
byte[] protectedBytes = ProtectedData.Protect(valueBytes, null);
_applicationSettings.Set(key, protectedBytes);
_applicationSettings.Save();

I need to get the session details in the following page AllEvents.xaml.cs :
using System;
using System.Collections.Generic;
using System.Linq;
using System.Net;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Navigation;
using Microsoft.Phone.Controls;
using Microsoft.Phone.Shell;
using AuthenticationSample.WP80.ViewModel;
using AuthenticationSample.WP80.Services.Model;
using AuthenticationSample.WP80.Services;
using AuthenticationSample.WP80.Resources;
using System.Threading.Tasks;
namespace AuthenticationSample.WP80.Views
public partial class AllEvents : PhoneApplicationPage
public AllEvents()
InitializeComponent();
MainViewModels FakeData = new MainViewModels();
FakeData.LoadData();
DataContext = FakeData;

Populate the current os directory in a SQL variable

Hello, I need to populate a SQL variable in a script with the current OS directory I am working from. This is a windows environment and I am using oracle version 9.2.0.1. I know if you do SQL>$cd it will execute a cd like you are at the dos prompt. Is there a way to put this into a SQL variable? This is a SQL*Plus script.
Thank you.

I have a tech support incident ongoing with ADC about this. People are away for the holidays, but so far I have been able to confirm that PackageMaker itself can't do this, as the name of the current user isn't available, nor do paths to the current Home directory work.
The only way is to have PackageMaker launch a preinstall shell or Applescript that does the "mv <item1> <item2>" or similar (the argument $1 that gets passed to these preinstall scripts IS the name of the user doing the install, so you can get the path to his home directory).
The problem THEN becomes, PackageMaker will not build a package that contains only scripts - it HAS to have some "payload" or you will get a build error. So the ultimate kludge would be to have it run the preinstall script, give it a bogus payload (empty file, etc) to install in e.g., /Library or /Applications, then have the postinstall script delete that bogus payload. I have not tried this so I do not know if it would work.
I am thinking now, with the extremely confusing and apparently contradictory rules that PackageMaker has, that the best way to install software is just to wrap a shell script in an Applescript Application Bundle wrapper (because you can't double-click a shell script without launching Terminal, so to have the user run a shell script you need to wrap it in Automator or AppleScript or a Cocoa app wrapper) and have the shell script do the copying of the files that you need. This still might result in the shell script trying to get some sort of permission (either sudo or that "Override user/group for xxx?" message).
I have read the rules on permissions for Packages about 1,017 times and they still make absolutely no sense to me, and I understand Unix permissions completely. All they would have to do is give some examples, but they don't.

Using the Set Session Info to populate Custom Variable

Hey everybody, I'm trying to setup a Set Session Info step so when a caller presses 1 for instance to go to a specific department I can go into the database and see how many callers pressed a certain button.
Here's what I've done so far, I've setup a Session called session_info with the value of null. At the very beginning of the script it shows session_info = Get Contact Info --Triggering Contact--, Session)
Then in the menu field when a caller presses 1 I have the Set Session Info step with the Session being session_info and then in the Context tab I have "_ccdrVar3" for the name and "1" for the value.
The script doesn't fail it's just not populating any Custom Variable with any data.
Also I've tried using the Set Enterprise Call Info and using a value of 1 and then Call.PeripheralVariable3 for the name. Not sure what the proper way to do this is. Anybody have any ideas?

Hi
You don't need a session var.
You just need to use 'set enterprise data' to set a call.peripheralvariable to what you like.
The data goes straight into the contactcalldetail table.. You can check it by doing:
run uccx sql db_cra select * from contactcalldetail where customvariableX = 'yoursetting'
Where 'yoursetting' is what you set the ent data to, and customvariableX is the var you use (e.g. customvariable3 if you use call.peripheralvariable3)
Regards
Aaron
Please rate helpful posts..

Part 2:Store The Current Session id in an Odi Variable

Similar Messages

Maybe you are looking for