Particular Data to be populated in different tile when I select the record

Hello,
I have two tiles, one tile is list tile and another one is Detail tile. List tile contains checkbox control which is unbound. When I check the checkbox, then the relevant data has to be displayed in Detail tile.
Thanks in advance,
Mateen

Hi Mateen,
Here is what you need to do.
On your List tile, write this code.
1. In Mygrid_RowColChange(ByVal LastRow As Variant, ByVal LastCol As Integer)
If Not anchorBCOL is Nothing Then
   If Mygrid.CurrentCol = 1 Then ( assuming 1 is the column number of your checkbox )
      RaiseEvent CheckMyBoxOnTheDetailTile (anchorBCOL.GetAttribute(Mygrid.CurrentCol, "UniqueGuidOfThisCollectionRecord")     
   End If
End If
2. On this list tile, create an Event:
   Event Name - "CheckMyBoxOnTheDetailTile"
   Event Signature - "Public event CheckMyBoxOnTheDetailTile(sKey As String)"
3. On the Detail tile, create a Public Sub.
   Public Sub PopulateMyCheckBox ( Key As String )
   If Not anchoronthistile.bo Is Nothing Then
      If anchoronthistile.bo.GetAttribute("UniqueKeyOfBOonThisDetailTile") = Key Then
         MyCheckBox.Value = True
      End If
   End If
4. On the Tileset, create an Event Handler.
   In the left dropdown choose your list tile name. In the right dropdown choose CheckMyBoxOnTheDetailTile.
In the body write this code:
MyDetailTileName.PopulateMyCheckBox Key
Regards,
Vadim.

Similar Messages

  • How can I partition an external hard drive with data in it? When I select the drive, the partition option is grayed out.

    I am having a problem partitioning an external hard drive with data in it. 
    When I select the partition, everything is grayed out.  I can't add a a partition for some reason.  When I asked this question to other people, they told me to select my partition "io" to do it from there.
    As you can see, I can't seem to partition it form there either.  I ran the Verify Disk utility but the volume came out okay.
    Any ideas as to what the problem would be?
    Thanks!
    Luis

    Select the main hard drive entry (topmost one.) Click on the Partition tab. Shrink the existing partition by grabbing the sizing gadget in the bottom right corner and pushing up until you free up enough space for your second partition. Be sure you do not shrink to less than the space currently occupied by your files. Click on the Add[+] button to create a new partition in the free space. Click on the Apply button and wait until the partitioning is completed.

  • Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms

    In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms.
    How can i do this?

    Hi,
    You can select the Payment Term at PO Header Level.
    When you book an invoice, that Payment Term will automatically defaulted to Invoice.
    You can define Payment Term in AP.
    Payment terms have one or more payment terms lines, each of which creates one scheduled payment. Each payment terms line and each corresponding scheduled  payment has a due date or a discount date based on either a specific day of a month, such as the 15th of the month, or a number of days added to your terms date, such as 14 days after the terms date.
    Payment Terms (Oracle Payables Help)

  • Hello I have the Latest version of Adobe Lightroom 5 to date (8/26/14) however just recently when I open the develop tab I'm missing two options on the right side column "Lens correction" and "Effects"  I do not know I've hit some setting to remove those

    Hello I have the Latest version of Adobe Lightroom 5 to date (8/26/14) however just recently when I open the develop tab I'm missing two options on the right side column "Lens correction" and "Effects"  I do not know I've hit some setting to remove those options or if this latest version deleted those options?  Any help would be greatly appreciated and please excuse my ignorance :/

    Right click next to one of the other headers and you will get a pop-up to enable the missing ones.

  • How do I make the menu title a different color when it is the active menu in Spry horizontal menu?

    How do I make the menu title a different color when it is the active menu in Spry horizontal menu?
    Dreamweaver CS5.5
    Apple OS X.6.8
    View site at: http://dorsay-easton-indian-law.com/staging/index.html
    Steps:
    1. Click link to land on Home page
    2. View Home link in Spry horizontal navigation menu
    Actual:
    Home menu title is the same color as all of the others.
    Expected:
    The title of the active menu is       color: #FFC.
    I was hoping that a:active would give me this functionality, but that's not how it is described. Any suggestions are welcome!

    Nothing I have tried in the template makes the BODY tag editable. That's why I'm wondering how to disconnect the template from the individual pages. Adding an ID to each body tag is a prerequisite of the how-to page you supplied.
    You don't make the <body> tag editable in a Template.
    You make attributes of the <body> tag editable.
    Don't disconnect the Template from the child pages.
    Specify editable tag attributes in a template
    http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7aa3a.h tml
    In the Template:
    Select the <body> tag (either in the Tag selector or click inside the <body> tag in Code View)
    Modify > Templates > Make Attribute Editable
    Select ID from the Attribute dropdown menu
    If there's no existing ID attribute then click Add and type ID into the next dialogue box
    Attribute: ID
    Check the box to "Make attribute editable"
    Enter anything into the Label field as a default e.g. foo
    OK
    Dreamweaver will change the <body> tag to read <body id="@@(foo)@@"....
    Now the ID is editable
    Save the Template and update the child page
    In each child page:
    Modify > Template Properties
    Select the id attribute from the list (it's probably the only one listed)
    Change its name in the box to whatever name matches your CSS rule for the active state for that page
    OK
    Save
    Upload

  • When I test my animation it runs differently from when I drag the timline

    When I test my animation it runs differently from when I drag
    the timline.
    I have a mask with text under it and I reveal the text from
    left to right with a rectangular mask. I then squish and then
    desquish the test. In the movie it does none of this.

    Select the text field on the stage and in the properties
    panel at the bottom of the screen you will see a small drop down
    menu which will be displaying either static, input or dynamic. Just
    change it to static OR if you NEED to use dynamic text then you
    need to embed yopur font so select the text field and select embed
    from the properties panel, then select the oprion you need from
    there.
    Hope this helps
    Thanks Alan

  • Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

    Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • Hi, I managed to publish my website on the server. The server recognize the different pages when I write the url, but when I use the a tag to surf to the next page it doesn't recognize the link.

    Here below you can find my coding > And I highlighted the links that refer to my different pages:
    <div id="Main_navMenu">
        <ul>
            <li><a href="/index.html">HOME</a></li>
            <li><a href="#">NIEUWS</a>
            <ul>
                <li><a href="/pages/nieuws.html">ACTUALITEIT </a></li>
                <li><a href="#">ACTIVITEITEN</a></li>
                <li><a href="#">ARCHIEF</a></li>
            </ul>
        </li>
        <li><a href="#">ADVIES</a>
            <ul>
                   <li><a href="/pages/contract.html">CONTRACT</a></li>
                    <li><a href="#">CHECKLIST</a></li>
                    <li><a href="#">UITKERING</a></li>
                    <li><a href="#">JURIDISCH</a></li>
            </ul>
        </li>
        <li><a href="#">WIE WE ZIJN</a>
            <ul>
                    <li><a href="#">BESTUURSLEDEN</a></li>
                    <li><a href="#">WAT WE DOEN</a></li>
                    <li><a href="#">ONZE LEDEN</a></li>
            </ul>
        </li>
        <li><a href="#">INFORMATIE</a>
            <ul>
                    <li><a href="#">STATUTEN</a></li>
                    <li><a href="#">FAQ</a></li>
                    <li><a href="#">LINKS</a></li>
            </ul>
        </li>
        <li><a href="#">LID WORDEN</a>
            <ul>
                <li><a href="#">INSCHRIJVEN</a></li>
                <li><a href="#">INLOGGEN</a></li>
            </ul>
        <li><a href="#">CONTACT</a></li>
        </ul>
    </div><!-- end navMenu -->

    Maddy dOliveira wrote:
    Hi,
    Thanks and yes, this is a test website.
    The link for news (nieuws) works now, but the link for Advies - contract gives this as result: http://www.maddydoliveira.com/DeActeursGilde/pages/pages/contract.html
    As you can see the link is looking for pages within pages.
    Is there a possibility to solve this issue? I've tried now for a small hour,.. and didn't manage to find a solution.
    Thanks in advance,
    Maddy
    If you just change the links to point to the 'pages' folder in the 'DeActeursGilde' folder instead of them pointing outside of the folder to the site server root which a / leading slash does that should solve your issue. With the leading slash the browser is looking for a folder named 'pages' outside of the 'DeActeursGilde' folder instead of looking for a 'pages' folder inside of it.
    <a href="pages/contract.html">CONTRACT</a>
    Contract
    I think when you create links in Dreamweaver you have an option to choose 'site root relative' links or 'document relative' links - well you always want document relative links.

  • Why do I have to guess how much data I might use in a month when I select a plan?

    When I sign up for water service, I don't guess that I might use 1,000 gallons a month, and then pay three times the going rate for water if I take a few extra showers. I get charged for how much water I use that month.
    When I sign up for electricity service, I don't guess that I might use some set number of kilowatt hours, and then pay three times the going rate if we have a heat wave and I run my air conditioner for a few extra hours.
    Why do I have to guess how much data I might use, and then spend three times the going rate if I stay up watching youtube videos for a few extra nights?
    It is stressful to have to constantly monitor usage, and figure out ratios of how much I've used compared to how much time is left in the billing cycle to see if I need to curb my usage. It is not a good customer experience. I would prefer that data be charged a flat rate based on actual usage, perhaps with an option to throttle speeds at certain levels to prevent cases where a minor lapse in judgment could ruin my monthly budget, like forgetting to check data usage religiously on a device meant to simplify my life.
    Thank you for your consideration.

    Simple answer is Verizon is offering a block of data for usage.
    Where I live the water bill states my wife and I are being charged for 30,000 gallons per quarter/half and the price is say $60 however we never use any where near that amount. I send the meter reading in and it shows the amount we use. But the hamlet we are in has a set amount of gallons. Not fair but we live with it.
    For your data outside of the unlimited which is not available any more to new customers you may be a light user and never go over the 2GB for $30 dollars a month. If you do you will pay through the nose for data. If you pay for more data say 4GB and I don't have the price for it so lets say its $70 then you don't have to watch as much for overage fees. But you are paying for the data in advance so as not go over and get hit with whopping fees.
    It is just the way it is.

  • When visiting one particular site my user name is automatically entered when clicking in the required box. I want to prevent this, how?

    This site requires a user name to be filled in a specific box and in another box you have to enter a series of numbers generated by a number generator (so not a password - different series every time you log in).
    However I don't want my username to appear automatically in the first box. When trying to change this in the security settings (extra-options-security), there is a password section where you can choose exceptions to the rule of remembering (if the remember box is marked). When clicking this exceptions box, the url of the site I'm talking about is not shown and it cannot be entered either, since you can only remove here.
    When clicking the "saved passwords" option, neither the site nor the username is listed. I think I have read all the help sections in relation to usernames and passwords, but found no solution.
    How do I prevent this username (so only a username - not the combination usename/password), to appear in the box?

    Hi Elron,
    I believe you can do that using a Firefox Add-on named [https://addons.mozilla.org/en-US/firefox/addon/form-history-control/ Form History Control]. You can download it through that link.

  • Time stamps in reports are different than what is on the record

    We have some users in the UK who have their time setting set to GMT. On our SR form, we have a few date/time fields. The data on the form is correct.. When they run a report with these fields, the time is adjusted by 8 hours, or PST, which is the time zone in our company profile.
    How can we make sure the reports show the correct time based on the users time zone?

    Did you get an answer re this David? Currently a client is having the same issue, trying to run an end of month report with some records entered on the last day of the month not being captured due to this time difference.

  • Can I send Logic drummer separate tracks to different outputs?  When I select the separate drum tracks the output is set and not changeable

    I am using the Producer drummers in Logic where the different drums parts,(snare, overheads, Kick, etc) are broken into separate tracks.  I would like to take some of these tracks (for ex. snare) and route it to a different output bus.   When I try to do this the output is not modifiable.  Anyone find a way around this?

    The question is not to find a way around it, the question is why it behaves that way in your Project.
    A Producer Kit is just a Summing Stack, were all the individual Channel Strips (Subtracks) are routed to the same Bus that the Master Stack Channel Strip uses as its input.
    In the example of the screenshot, the Summing Stack uses Bus 2, but I selected different Outputs for the firstsix Subtracks, even a Surround Output, whatever is available under the Output Selection Button. Only the "Tom High" Channel Strip is still routed via Bus 2 to the Master Stack Channel Strip.
    You can find more in-depth explanations about the Drummer in my graphically enhanced manual "Logic Pro X - How it Works".
    Try to use a different Project and see if you can change the output routing there.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Where do I find my upgrade date and how do I find out when I bought the phone??

    I need to know where I can find my upgrade date and is there any way to find out when I started my services with Verizon?someone help plezzzzz! thanx

    Log on to your account, and click on the picture of your phone. It will show you when you can upgrade and when your contract ends. You can go back two years (or one year, if you opted for a one year contract) to figure your start date for that contract.
    If this was not your first contract, and you've been with Verizon for several years, you may need to call customer service to find out your original start date.

  • Different results when I use the debug trace mode

    Hi,
    I'm using LabView to configure test subject equipment via SNMP messaging. During the process and before each reading I need to re-calibrate my spectrum analyzer for things like center frequency and channel bandwidth. To do this I have a function which send out the SNMP get request to an SNMP server.
    Currently I have the same vi appearing in a sequence loop a couple of times. When I run the program in debug mode everything is good. The first step in the sequence gets me a valid center frequency and the second delivers a valid channel bandwidth. However if I turn off the little light bulb (debug tool) I get a valid center frequency but the channel bandwidth returned to the calling vi is the center
    frequency.
    I've looked at the messages comming back from my SNMP server and they are correct. I've tried setting booleans which would hopefully ensure the correct message is delivered but no.... I even tried timers all over the place to slow things down.
    I'm running LabView 5.1 on an NT box with a P3 500 processor.
    This problem may have something to do with the same vi being called in the same sequence loop more than once??
    Any help would be apreciated.
    Regards
    Mike Gaskin

    You could make it reentrant. And make sure that they execute in right order.
    "Michael Gaskin" wrote in message
    news:[email protected]..
    > Hi,
    >
    > I'm using LabView to configure test subject equipment via SNMP messaging.
    During the process and before each reading I need to re-calibrate my
    spectrum analyzer for things like center frequency and channel bandwidth.
    To do this I have a function which send out the SNMP get request to an SNMP
    server.
    >
    > Currently I have the same vi appearing in a sequence loop a couple of
    times. When I run the program in debug mode everything is good. The first
    step in the sequence gets me a valid center frequency and the second
    delivers a valid channel bandwidth. However if I turn off the little light
    bulb (d
    ebug tool) I get a valid center frequency but the channel bandwidth
    returned to the calling vi is the center frequency.
    >
    > I've looked at the messages comming back from my SNMP server and they are
    correct. I've tried setting booleans which would hopefully ensure the
    correct message is delivered but no.... I even tried timers all over the
    place to slow things down.
    >
    > I'm running LabView 5.1 on an NT box with a P3 500 processor.
    >
    > This problem may have something to do with the same vi being called in
    the same sequence loop more than once??
    >
    > Any help would be apreciated.
    >
    > Regards
    > Mike Gaskin
    >

Maybe you are looking for

  • ARD over internet to multiple macs using the same connection

    Hi, I know the topic has been covered to enable ARD over the net, however all the solutions I see require port forwarding which in essence makes only one computer using the internet connection available, how do you make it so multiple macs can use th

  • How do I get my ereader to appear on the left hand side of Digital Editions?

    I have a Kobo Vox ereader and it works well.  It connects to my computer and appears  when I look at My Computer.  It doesn not appear on the left hand side of Digital Editions under Devices (devices does not appear either) when ADE is started.  The

  • The enhancement specification of structure type ekko is not consistent

    Hi all, While making a program that  displays status of gr /ir, excise availing and miro I got an error as "The enhancement specification of structure type ekko is not consistent".So what does it mean and how to remove it. Thanks Regards Navratan

  • How to create Users/Roles for ldap in weblogic without using admin console

    Is it possible to create Users/Roles for ldap in weblogic without using admin console? if possible what are the files i need to modify in DefaultDomain? or is there any ant script for creating USers/Roles? Regards, Raghu. Edited by: user9942600 on Ju

  • Data Packages

    About 6 months ago when it was time for me to renew my phone I was told that I would have to pay $29.99 for my data package for my Droid. That makes 4 out 5 phones on our family plan paying $29.99 each! When is Verizon going to get with the program a