Partners from function Customer hierarchy cannot be processed online

Hi all,
After creating a rebate agreement (VBO1) and Processing Customer Hierarchy (VDH1N), as well as setting partner determination (VOPA) for DOCUMENT HEADER as well as DOCUMENT ITEM , the partner function for customer hierarchy is not automatically appearing in sales document header partner tab. And when I am giving it manually in sales doc header, system is giving this error message:
"Partners in the specified partner function cannot be processed online. The program generates them and completes the data automatically".
Pls Help
Thanx and regards
Vikas Chhabra

Hi There,
we are also facing the same problem could u please explain how did u resolve the problem

Similar Messages

Partners from function Customs agent cannot be processed online

hello everyone
When I try to add a partner role TZ customs agent in the shipment document (VT02N)
i get the following message:
Partners from function Customs agent cannot be processed online
Message no. VPD032
Diagnosis
Partners in the specified partner function cannot be processed online. The program generates them and completes the data automatically.
however when i try to add a 'TF' partner - its working...
thanks ahead
Eyal

Hello Eyal,
Goto transaction "VOPA". For Customer master, Click on Partner Procedure
Double click on your partner procedure [Example WE: Ship-to Party].
In the next screen, check if the partner function 'TZ' is defined or not.
If the same is not present there, insert the partner function. Also, note that the partner function 'TF' would be present there.
These steps would resolve your issue.
Regards,
Gauravjit.
Reward points if the resolution is helpful.

Partners in the specified partner function cannot be processed online

Hi all,
After creating a rebate agreement (VBO1) and Processing Customer Hierarchy (VDH1N), as well as setting partner determination (VOPA) for DOCUMENT HEADER as well as DOCUMENT ITEM , the partner function for customer hierarchy is not automatically appearing in sales document header partner tab. And when I am giving it manually in sales doc header, system is giving this error message:
"Partners in the specified partner function cannot be processed online. The program generates them and completes the data automatically".
Regards
Amit

Hi Amit,
you have to define all exiting partner function assignment to account group (e.g. 1A 1B 1C 1D) please check all partner you have assigned correctly
Regards,
Milind

Deleting Partners from the Customer Master that are on Open Sales Orders.

Does SAP handle removing the Partner from Open Sales Orders when a Partner is deleted in the Customer Master. For us, this is not happening, this there some config that must be turned on for this to happen ?
Or do we have place in code in a User Exit in the Customer Master to check for Open Sales Orders and if so, block the Deleting of the Partner ? If so, what User Exit should be used ?
Looking to see how others have handled this.
Thanks,
David

Hi David,
Try this user exit.
RFDRRANZ User exits: Accounts Receivable Information System
Regards,
Vijay

Number of partners that can be linked in a Customer Hierarchy

Hi!
We have requirement to map multiple partners to a customer hierarchy account. Would be glad to have some insights on:
1. Any limitation on the number of partners that can be linked to any hierarchy node (even the highest)?
2. If yes, how many?
S.Kannan

Hello,
This is a community forum for technical questions & issues.
For question regarding pricing / licensing please contact a Microsoft sales partner or licensing expert.
Call (1-800-426-9400), Monday through Friday, 6:00 AM to 6:00 PM PST to speak directly to Microsoft licensing specialist.
http://www.microsoft.com/en-us/server-cloud/products/sql-server/buy.aspx
Olaf Helper
[ Blog] [ Xing] [ MVP]

Function group cannot be processed

Hi All,
I have added a new field to an already created custom table. when trying to regenerate the table maintenance generator i get an information message "*function group cannot be processed*". The reason being that the function group is inactive. I tried to activate that function group. But then found that there were some errors because of which i couldn't activate it . it showed that an Include report was not found. That include is reserved for function group includes. What do i do to solve this problem.
Edited by: Herwin Wilmet Dsouza on Dec 10, 2009 7:58 AM

Hi,
The best thing to do when you add a custom field in the custom table is to degenerate the TMG, the View and then activate the Table using SE14 (Database utility) and then from the View again use the TMG to generate the Maintainance Views.
Yes, this is a lengthy process but at least this is good as it will ensure that the Function Group is activated and the views will work properly.
Note : If you have added your own logic or code in the TMG for any additional functionality you need to take a backup of the code or all the relevant objects (e.g. Include Reports,etc) as once you do a new generation of the same function groups this will be over written.
Hope this helps.
Thanks,
Samantak.

Authorized Partners for Release Orders with customer hierarchy

Hello everyone,
      I have created a value contract with order type WK1, in the order type WK1 configuration, choose rule B for check partner auth. field, namely we want to use
customer hierarchy to detemine the sold-to-party for the follow-up release order. Also I have created the customer hierarchy with hierarchy type A. There are
four levels under this hierarchy, it contains four customer nodes and four customers. Every customer is belong to a customer node. The partner determination
for the customer hierarchy have alredy done, I can see the customer hierarchy "1D" at the partner tab of header in the contract, but when I release the sales
order against the contract, input a low-level customer number, still got the message "partner X is not authorized to release from contracts.".
     I want to know if I missed some settings in order type configuration or the copy control from WK1 to OR. If this scenario need integrate with CRM system? I
have found some related information, just list below:
    Partners in the hierarchy (Rule B)
If the partner who wants to release against the contract is the sold-to party of the contract or at a lower level in customer hierarchy to the sold-to party in the contract, the system accepts the partner as the sold-to party for the release order.
If rule B is defined for the contract type, you can search for authorized partners for a release order using the contract number. Equally, you can search for the relevant contract for a release order using the partner number. In this case, the partner authorization rule is irrelevant.
Prerequisites
If you wish to use group hierarchies other than pricing hierarchies to determine authorized partners, you must have created a hierarchy category and a hierarchy:
To create the hierarchy category, go to Customizing for CRM under Master Data --> Business Partner--> Business Partner Group Hierarchy.
To create the group hierarchy, go to the SAP Easy Access Menu and choose Master Data --> Business Partners --> Maintain Group Hierarchy.
Note that you can only create group hierarchies in the SAP GUI and not in the People-Centric user interface.
You must have activated the necessary settings for the sales contract and the release order in the IMG for CRM. For more information, see Transactions ---> Settings for Contracts -->Define Settings for Authorized Partners.
Thanks!

Hi,
In transcation VTAA at item level have your own cory requirment code which will calcullate net value of the doc, hope this works out
regards
sriky

Error in VA01 - "Sales order cannot be processed. Check customer type."

Hi,
While creating a Sales Order in VA01, I receive this error message - "Sales order cannot be processed. Check customer type."
Could you please tell me what could be the reason for this.
Thank you,

Hi,
U Can Find the Customer Type in Extras> Account Group Information> Customer Types.
There U can Make the Customer Type.
Regards..
Praveen Kumar.D

HT3743 Iphone 4 unlocked by at&t i did a restore from itunes and get an error message "your request cannot be processed please try again after sometime" I tried for a week now but same problem, please advice

I have Iphone4 brought from at&t USA(carrier locked) and i am in india now, i contacted at&t and requested for an unlock for me to use with indian carriers.
I got an email confirming the unlock has been completed from at&t and asked me to connect the device to itunes and do a back&restore, after the restore process i get an error message on itunes "your request cannot be processed, please try again after sometime" i tried it with my airtel sim card and also at&t sim card but did not work. I contacted at&t and they confirmed that the unlock request was successful but i still get the same error.
Please kindly help me if i need to do someting to be able to activate and unlock my iphone4

Excuse me. I am on a contract with O2 with an iphone 4s, suddenly xmas day it said "no service", took it to o2 who sent it to apple factory who refused to repair it because a screw missing. I wouldnt know have never opened phone in my life,wouldnt know how to, then went direct to Apple Regent St London who also said "screw missing, warrenty void, then produced a phone just out of contract due to upgrade,a vodaphone carrier 3gs, it was unlocked but then told by apple the owner had to go to vodaphone and get it unlocked on their books which could take up to 48 hours, it is now 72 hours later and i have the same error despite backing up old phone with i tunes and i cloud,am very angry and am paying alot for a contract every month, all i can see is "no service and waiting for activation" and all ths started when I upgraded to IOS 6.Am extremely upset and still under warranty but no one seems to want to help me to connect to WiFI, i cannot keep going to Apple Regent Street at lunchtime and be shooed of with excuses, this replacement phone 3gs should work and it doesnt. Am extremely annoyed with the info i have been provded wth by Apple staff.Now I havent had a phone since 25th december.

HT4061 I can't download an application from Apple store. A message comes' your request cannot be processed'. Error code 1009

Hello,
I cannot download an application from Apple store. A message appeares "your request cannot be processed. Error code 1009 "

hi
i have a messege ( your request cannot be processed error code 1009) my iphone is 4s with ios 7.0.4 .
so cannot download in itunes
if i creat a new apple id problem is solved
thanks

How to download the customer hierarchy from VDH2N

Hi Team,
Is there is any possibility for downloading the customer hierarchy from VDH2N. or any SAP standard report is available for downloading the customer hierarchy.
With Regards,
Jana

Hi,
Extract it from KNVH table
Kapil

Functional module to obtain the Customer hierarchy

Hello Experts,
I need some information regrading Customer hierarchy step. Could anyone please assist me the function module used in customer hierarchy to obtain the hierarchy.
Thanking you,
SS.

Hello Pratima.
Thank you for your quick response.
Could you please provide me the configuration steps for customer hierarchy as this is our action event.
Thanks in advance.
Regards,
SS.

Executing a BDC Session using a Function Module from a Custom Z-Report

Hello,
          I have a requirement where I need to Create a BDC Session for the given Transaction Code. But instead of executing the Session from SM35 manually, I need to Execute the Session Immediately from my Custom Z-Report itself.
         Is there any Function Module for this Activity? Please let me know.
Thanks and Regards,
Venkata Phani Prasad K

1) fm job_open
2) submit report
3) fm job_close
4) finally select table TBTCO
example:
DATA: jobcount_test LIKE tbtcjob-jobcount,
        job_released    LIKE btch0000-char1,
        rcode(2),
        strtimmed LIKE btch0000-char1 VALUE 'X'.
DATA jobname LIKE tbtcjob-jobname.
CONCATENATE 'TEST_' sy-repid '_' sy-datum INTO jobname.
CALL FUNCTION 'JOB_OPEN'
       EXPORTING
            jobname          = jobname
       IMPORTING
            jobcount         = jobcount_test
       EXCEPTIONS
            cant_create_job = 1
            invalid_job_data = 2
            jobname_missing = 3
            OTHERS           = 4.
IF sy-subrc NE 0.
    MESSAGE x000(yp) WITH 'JOB-START ' jobname ' failed !!!'.
ELSE.
*--Step insert
    SUBMIT rsbdcsub
    USER sy-uname VIA JOB jobname NUMBER jobcount_test
    WITH mappe = map
    WITH von = pdatum
    WITH z_verarb = 'X'
    AND RETURN .
    CALL FUNCTION 'JOB_CLOSE'
         EXPORTING
              jobcount             = jobcount_test
              jobname              = jobname
              strtimmed            = strtimmed
              targetsystem         = sy-host
         IMPORTING
              job_was_released     = job_released
         EXCEPTIONS
              cant_start_immediate = 1
              invalid_startdate    = 2
              jobname_missing      = 3
              job_close_failed     = 4
              job_nosteps          = 5
              job_notex            = 6
              lock_failed          = 7
              OTHERS               = 8.
    IF sy-subrc > 1.
      MESSAGE x000(yp) WITH 'JOB-CLOSE ' jobname ' failed!!!'.
    ENDIF.
ENDIF.

When importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed.

when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.

here is one that is imported and stays .mp4. the specs are same as original file before import.
here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs.

I have taken a photo from an airplane and cannot get the 'map' function on the exifwizard app. Is it because I was too high? Altitude that is.

I have taken a photo from an airplane and cannot get the 'map' function on the exifwizard app. Is it because I was too high? Altitude that is. Other photos allow me to use the 'map' function.

Most likely, if you were inside the airplane, rather than sat on the wing, the iPhone couldn't get a GPS lock-on, or you didn't wait long enough for it to get a lock on.
EDIT: Lawrence is right... forgot about that.

Partners from function Customer hierarchy cannot be processed online

Similar Messages

Maybe you are looking for