Party in the Integration Directory

Hi,
Why do we need to create a party in the Integration Directory? What is the use of it.
Also, the SAP help asks us to create Business service without a party while BPM. Why?
Priya

Hi,
I would recommend you to read this link:
http://help.sap.com/saphelp_nw04/helpdata/en/87/1d6e3fefa13042e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/4f2c41c684de2be10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/da/7a2f41b239a831e10000000a1550b0/content.htm
Regards
Suraj
Message was edited by:
S.R.Suraj

Similar Messages

List of unnassigned objects in the integration directory

Hi! Hope this is an easy question. Does anyone know of a way to get a list of all objects - party, service, rec det etc... - that are not assigned to a Config Scenario in the integration directory. Need to do a cleanup and wants to avoid going object by object to get the list. Thx, Duncan

Thanks for the replies. The objects tab shows me all objects. I need to see only those not assigned to a CS. How can I do that there?
The where used option requires me to go trhough every object (1000+) and check one by one. That is what I am trying to avoid.
Ideas? Thx, Duncan

Unable to Load the Integration scenario into the Integration directory

Hi All,
I am new to using SAP XI.
Require your help on the following issue.
I have built an Integration scenario, added Component Type: Product Version, inserted actions and connections.
I did check for any errors. I found no errors.
When I am trying to load this scenario into the Integration directory its not showing up the scenario in the popup.
Navigation:
Directory > tools> Transfer scenario from repository
The status of Integration Scenario in the builder shows as
"Being processed".
I created the scenario 2 days back.
Can some one help me in this?
Regards,
Meher

Hi All,
Thanks to all who helped me.
michal,divija : Can you please let me know in details how to activate Business Scenario?
I did not create any business process.
Sridhar: I did releases some locks on my process, no luck.
Can you please explain me in more details?
Should I have a process build for my Integration scenario to be activated?
Thanks,
Meher

No service for system X client Y in the integration directory

Hi guys and gurus,
I've struggling with the following case for a couple of months (!!) and still I can not make it. I have to say that I am coming from the MM modules but trying to set up a ICH demo by myself during my spare time.
I send an idoc from R/3 to XI using program RSMIPROACT and I get message No service for system SAPR3I, client 800 in Integration directory. Even though, idoc has status 03 (Outbox).
- I have created a technical and business system.
- Connections work properly in SM59
- Port XIDOCPORT with RFC XIDCLNT100 maintained txn WE21
- Partner XIDCLNT100 (LS) with Outbound parameter:
Idoc name - Port created. txn WE20.
- IDX1 maintained in XI system.
Is there something missing?
This is my first post but points rewarded if somebody takes me out of this hole.
Thanks,
Ivan.
key words: ICH, Note 940313 IDoc adapter: Error messages in SM58, <a href="https://service.sap.com/sap/support/notes/940313">Idoc Adapter : Error Messages in SM58</a>, No service for system SAPABC client 123 in the integration directory,

Hi ,
Create a technical system and bussienss system of type WEB AS ABAP and use this bussiness system for source system in XI and try it.
Thanks & Regards,
Sekhar

Error while importing the Integration Directory Objects

Hi,
I created one simple RFC to RFC scenario.We have only one XI system. after creation of this scenario I exported the Scenario from Integration Directory. Then I deleted the configuration scenario from Integration directory. Now I tried to import the TPZ file which was generated before the deletion of the objects in the integration directory. I get following error :
"No business system found on the application server (XXXXXXX, 00) for client 001"
XXXXXXX is our XI server.
Now if I create the Business system for client 001 in SLD for XI system and tried to import the TPZ file again, it works.
What could be the reason for this? Also Please let me know if I have to do any configuration before importing the TPZ file in same the same system to avoid the above error.
Highly Appreciate your valuable inputs.
Thanks,
Chandravadan

Hi Swarup,
Thanks for reply.
As you suggested, I did the SLD cache refresh and also whole cache refresh. But Still I get the above error. and if I create the business system for 001 client of XI system then it works.
My doubt is why I get error only for 001 client. There are also clients in XI system. and I have business system for client 600 of XI system as Integration server.
Thanks,
Chandravadan

NO Interface Mapping found in the Integration Directory (Configuration)

Hi,
I've got following problem with PI 7.0::
I have a Mapping Scenario designed in the IR. It works - using test function - there. If I go to the COnfiguration Tool during creating of the Interface Determination it doesn't find the Interface Mapping. The Sender resp. Receiver Interfaces are correct assigned to the Business Systems.
- Sender Business System is a FTP Server, which contains the needed Sender Interface.
- Receiver Business System is a SAP R3 System containing the RFC Receiver Interface.
I had to change the Related Integration Server of the SAP Business System in the SLD. How can I be shure, that my PI System is syncronous with the SLD? How can i get the newest changes - BS, TS or SC - from the SLD updated to my PI?
Thx in advance
Michael

Hi,
You must make sure that you have correctly identified the interfaces in your interface mapping.
1. Message Interfaces are correctly configured
2. Outbound/Inbound Interfaces are correctly declared in Interface Mapping
Otherwise, your interface mapping would not be found in the interface determination in Integration Directory.

Error in the Integration Directory

Hi All,
In ID When I Go for Environment-->>Cache Notifications
I Got the Following Error
Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>
Please Resolve this Issue
Regards
Khanna

Hi Navadeep,
I Checked With All PI* Users, None of them are Locked.
In The Runtime Workbench Component Monitoring-->> All Components AE, SLD,IR , ID, RTW, Are in the Green State Only.
Here If I Clicked on the Cache Connectivity Test Means It's Giving Error.
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.epnwsrv, string], target element type: SAP_BusinessSystem)
Please let me Know
Regards
Khanna

Role based authorisations in the Integration Directory

We have built a new PI landscape (Pi 7.11) and worked with our security teams to perfect the various roles. I am now attempting to implement role based authorisations in the ESR & ID so that objects in our QAS and PRD environments can be configured but not deleted or created.I have implemented role based authorsations as per the SAP standard process performing the following actions
Exchange profile com.sap.aii.ib.util.server.auth.activation was set to true and the Java Stack Restarted.
I created a role in the ID that allowed editing of any object.
I assigned the role to my userid in NWA useradmin
I am unable to edit ANY object in the ID
When I set the Exchange profile parameter to false I found I was able to edit any object in the ID.
So its obvious that the Exchange Profile Parameter does make a difference. However, it doesn't appear as if the role I created is being referenced, even though I assigned it to my account in NWA user admin. I looks like I may be missing some exchange profile parameters. I have the following exchange profiles set:
IntegrationBuilder.IntegrationBuilder.Repository com.sap.aii.util.server.auth.activation (string) = true
IntegrationBuilder.IntegrationBuilder.Repository com.sap.aii.ib.server.acl.enable (boolean) true
IntegrationBuilder.IntegrationBuilder.Directory com.sap.aii.util.server.auth.activation (string) = true
IntegrationBuilder.IntegrationBuilder.Directory com.sap.aii.ib.server.acl.enable (boolean) true
Any advice you can offer would be appreciated

Resolved this issue.
The documentation is confusing but finally found the answer by referring to the SAP XI 3.0 documentation.

Change the SLD adress in Integration Directory

Hello,
When I launch the SLD from the integration directory page I get an error and the host adress is not right.
Could you please show me how to change the host adress of the sld.
In order to access the integration directory page go to:
http://<host>:<port>/dir
Thanks

URL for SLD is maintained in Exchange Profile.
In exchange profile you will find the URL maintained for SLD in "Connections". You need to change below parameters:
com.sap.aii.connect.cr.name
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.landscape.name
com.sap.aii.connect.landscape.httpport
Thanks,
Sunil Singh

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

Integration Directory configurations for IDOC - XI - File

Hi all,
I have a scenario as above: IDOC-XI-FILE
The IDOCs come from an R/3 system - NHGDDBS01.
I've configured 2 BS:
1) BS_NHGDDBS01
-> TS: NHGDDBS01, type: WebAS ABAP
-> SWCV: BASIS 6.20
2) BS_DEV1_NAUTICUS_OOTS
-> TS: TS_DEV1_NAUTICUS_OOTS, type:Third Party.
-> SWCV: SWCV_DEV1_NAUTICUS_OOTS, type: Third Party
-> PDT: PDT_NAUTICUS_OOTS
With this setup, can someone help me by showing me how to configure the Integration Directory in order to receive IDoc from R/3 (nhgddbs01)?
Please help.
Thanks.
Ron

> This is known issue.....Check the below
> steps.............
>
> Go to XI system ->and IDX1 transaction.. And check
> the port number + RFC destination is given correctly.
> this should point to SAP system ..
> Check thsi RFC destination is having all the entires
> and test connection success
>
> And the port should have the naming convention
> SAP<System Id>.
>
> ........................Check this SAP Note -940313
Hi,
I followed the SAP Note.
The SAP System ID is DV1.
I've configured IDX1 with the following port:
Port: SAPDV1
Client:108
Description: <blank>
RFC_Destination: PI_001 (This RFC destination points to DV1, despite the naming. Connection test is successful)
I recreated metadata on IDX2:
IDoc Types: ZPATINFO
Source Port: SAPDV1
IDoc Types: ZADMINFO
Source Port: SAPDV1
However, when I test the message from R/3 using WE17, SM58 on R/3 it's still showing the error:
Transaction IDX1: Port SAPDV1_108, client 108, RFC Destination error.
May I know where did this error occur and how to rectify this?
Please advise.
Thanks.
Ron

Integration directory problem while creating business service

HI,
CURRENTLY I AM FACING A PROBLEM IN INTEGRATION DIRECTORY. WHEN I TRY TO CREATE A BUSINESS SERVICE INSIDE THE SERVICE WITHOUT PARTY WHICH I AM TAKING AS A SENDER, I AM UNABLE TO GET THE SOFTWARE COMPONENT VERSIONS IN THE SENDER PARAMETERS.
IF ANYONE CAN GIVE THE COMPLETE CONFIGURATION STEPS FOR SENDER AND RECIEVER SYSTEM THAT WILL BE VERY HELPFUL.
BEST REGARDS,
MONA

Hi Mona,
Let me explain you in detail:-
First, Activate the Change List in the Integration Repository once the design objects are complete. By activating the change list, the object becomes available for Configuration in the Integration Directory.
Secondly, to transfer Integration scenario from Integration Repository - you need your Integration Scenario to be created correctly and when you run this wizard you actually pull the Integration scenario in the Integration directory.
You also have the option of 'Configuration Wizard'.
This tool is a wizard for creating your Recevier Determination, Receiver Agreement, Sender Agreement and Interface Determination. For this tool, you do not need the Integration scenario
It is not mandatory to use any of these tools to configure your scenario.
All you have to do for configuring your scenario is
1. Create Business system/Business service
2. Create Communication Channel
3. Create Receiver Determination
4. Create Interface Determination
5. Sender Agreement
6. Receiver Agreement
I hope this provides you a solution.
Regards.
Praveen

How to add buisness system in Integration directory -objects

Hi All,
I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
so in the integration directory,
objects--->service without party >buisness system>
in the buisness system , whatever buisness system i created the is not found.
how to add buisness system into integration directory -- objects.
Regards,
vinoth.

Hi,
go to integration directory,
objects--->service without party >buisness system>
select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
and do the same process again..
Regards,
Venu.

How to Change SWCV in Integration Directory for adapters

Because of new SWCV, I have to point all interfaces to new version of SWCV. How can I assign Service Without Party / Business System Service to point to interfaces that require new SWCV?
I deleted and recreated Sender Agreement, Receiver Agreement, Interface Determination, Receiver Determination for new SWCV in Integration Directory but I could not assign or create Business System to interfaces for new SWCV. It is still pointing to old version of SWCV.
Can someone give steps on how I can change the SWCV in the Integration Directory?
Thanks

hi,
>>>>How can I assign Service Without Party / Business System Service to point to interfaces that require new SWCV?
you can only assing once
later on you just ADD them to the scenarios
by using Add to scenario function
Regards,
michal

Cannot see business system in integration directory.

Hi all,
I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system.
I have configured the scenario as given in the exercise scenario in the integration repository.
In the Integration directory, i create a new configuration scenario . Now i go into the service without party , and try to assign a business system . However, here , in the list of business systems available from the SLD, i cannot see my business system . Could anybody help me find out why this is happening ?
p.s. while creating the technical system , i have given 'localhost' as host, since i didnt know what to give here and thats what most other technical systems in the SLD contained. could this be the problem ?
Thanks,
Joe.

Looks like the much abused points system is having a bad day on SDN
I am glad actually - will keep the spammers away
A Thank You is all that drives and should drive SDN
Regards
Bhavesh

Party in the Integration Directory

Similar Messages

Maybe you are looking for