Pas 2 air When watching a clip or vidéo only Sound no images

AiAd air 2 l'astuce génération When watching a clip or vidéo only Sound no images

I once ran into this and was fortunate enough to have lots of time to research the problem.
MPEG2 has this unusual feature in that the video stream is, effectively, variable frame rate. There is no fixed rate at all; instead you get a bunch of so-called presentation timestamps - one for each frame, in fact. The audio stream also has them. Hardware and software that plays MPEG2 streams must know how to use these to sync up audio, and they do.
When you import such a stream into a video editing software, it would usually make certain assumptions about the frame rate, because things are already complicated enough even with a constant framerate. Most of the time the video is actually timestamped at regular intervals throughout the entire stream, so the assumption doesn't cause audio desync.
However, if you have noisy analogue splices in the original video you captured, the presentation timestamps produced by a capture card might have large jumps in them. Conventional players recover trivially by using the timestamps to realign the audio straight away. I haven't, however, yet seen any video editing packages that do this out of the box.
I'm not aware of any existing scripts for fixing this in Premiere, but I've seen one that makes use of Avisynth. I could try digging it up if anyone cares.

Similar Messages

When watching Youtube clips firefox causes windown blue screen - windows 7 on HP8540w

Hi
HP8540w laptop with Windows7 professional.
when watching youtube clips windows crashes - blue screen of death!
watching the same clips in Internet explorer doesn't cause a crash - isolated to Firefox.

See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

I never notied that icon before, and I've been using Bridge for 7 years.
Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow.

My fan goes crazy when watching vedio clips?? Why??

Everytime when I watch video clip or movies with RealPlayer, the fan of my Macbook just goes crazy. It sounds like a jet. Is it something wrong with the Macbook or the Realplayer?
Does anybody else have experienced this issue?
How could it be solved??
Thanks

Like this:
1) Click on the blue apple in the top left of your screen.
2) About this Mac
3) Click the "More Info" button
4) When the System Profiler opens, click on Applications. It is in the left pane near the bottom.
5) The right should now contain all the names of your applications in alphabetical order. Look for RealPlayer.
6) Once found, click on it to clearly highlight it.
7) You should see:
Version: 10.1.0
Kind: Universal
If you don't see that, then uninstall RealPlayer and download the correct version from:
http://www.real.com
Read everything VERY carefully. Look for the Intel version of the player.
I just realized that you might be asking how you know if you have the latest system and firmware updates. If that is the question, then:
1) Click on the blue apple in the upper left of your screen.
2) Click "Software Update..."
3) Download 10.4.7 (if you don't have it already)
4) Download Intel Firmware update (again, only if you don't have it already)
5) Reset your machine when prompted by OS X.
That's about I can type right now (my brain is pudding). Post back if this STILL wasn't helpful enough (or at all).

When watching Youtube, there is a lag between sound and video. Does anyone know how to fix this. It only seems to happen on Youtube.

Youtube starts ok, but there is a sound/video lag which becomes greater as the video continues. This doesnt happen on other sites which use video.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Messages>Send and Receive and sign out of the ID and sign back in. Note this will delete all old Messages from the iPod.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

When opening files in Photoshop CC, it only displays partial image. How do I get it to display the entire image on open?

I understand that people want to check the quality of the image when they open it, but I hate that I'm looking at the top left of every image when I open it. It's not maximizing the size of the image based on my screen size. I hate having to hit apple-0 every time I open a file. Where's the preference to change this??!

What you see is not normal on a PC I do not know abouts Mac's.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

When watching baseball highlights the video is slower than audio. I checked all my plug ins and they are up to date. suggestions?

I have been having problems when watching video clips from news but mainly when I check the video highlights on mlb.com. The video is slower than the audio. It freezes up at times or drags.I have checked all my plug ins on firefox and they are up to date. I checked my PC for errors and cleaned it. But still having problems.

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

How to prevent the regular password prompts when watching a movie on my MacBook Air?

Hello everyone.
I recently started renting movies from the iTunes store and watched them on my MacBook Air since I don't have an appleTV. (In fact on my TV connected via HDMI cable to the MacBook but I think that doesn't change the cause)
Now every now and then a automatic password prompt kicks in overlaying the movie, so I have to stand up each time and type in the administrator password in the middle of the movie. This happens maybe about every 30-45 mins. Needless to say this is extremely unpleasant when watching a movie. Unfortunately I cannot tell you which programm causes the prompt since I always close all other programms other than iTunes.
Is there a way to temporarily prevent all automatic password prompts?
I hope you can help me,
Greetings jonezdotcom

This is taken from Mac Help. It should guide you in solving your issue.
Changing the way users log in
You can require users to enter a password to log in to your computer, or you can turn on automatic login, which automatically logs in a specified user each time the computer starts up.
Automatic login is useful if you’re the only person who uses your computer, and the computer is always in a safe and secure place. If you have more than one user account on your computer, or if you’re concerned about the security of information on your computer, you should require users to log in with a password. Automatic login is not available for accounts that are using FileVault encryption.
If you require users to log in, you can change what they see in the login window. You can show a list of users with a picture next to each name and a place to enter the password, or require users to enter both their user name and password.
To change the way users log in:
Choose Apple menu > System Preferences and click Accounts.
Open Accounts preferences
Click the lock icon to unlock it, and then type an administrator name and password.
Click Login Options.
Do one of the following:
To require users to log in whenever the computer starts up, choose Off from the “Automatic login” pop-up menu.
To have the computer automatically log in to a particular account when the computer starts up, choose the account from the “Automatic login” pop-up menu, enter an administrator password, and click OK.
IMPORTANT: Automatic login allows anyone to get immediate access to your computer simply by restarting it. If you turn on automatic login, make sure the computer doesn’t automatically log in to an account with administrator privileges.
Next to the ”Display login window as,” select how you want the login window to appear:
To have users select an account from a list in the login window, select “List of users.”
To require users to type their user account name and password, select “Name and password.”
To show each user’s password hint, select the “Show password hints” checkbox.
If you turn on automatic login for yourself, the computer opens your account when it starts up. If you log out, other users see a login window to log in to their user accounts.
The Login Options pane of Accounts preferences
Use the Login Options pane of Accounts preferences to change the way the login window behaves to be more secure or set up the way users will log in to their accounts
PREFERENCE EXPLANATION
Automatic login
To have the computer automatically log in to an account at startup, choose the account from the pop-up menu. This is less secure than requiring users to log in, since it allows anyone to use the computer just by turning it on.
To require users to select an account and enter a password to log in, choose Off from the pop-up menu.
Automatic login is not available for accounts that are using FileVault encryption.
Display login window as
Select “List of users” to have users choose their accounts from a list in the login window.
Select “Name and password” to require users to type their name and password in the login window.

Air Screen Dims when watching movies

Hi all! This is a stupid question. I've just purchased a new macbook air 11.6 in and when watching movies (not in ful screen) the screen dims, Im assuming because of inactivity with keyboard, etc. I dont like to watch all movies in full screen, so how do I change the settings to allow for longer 'inactive' times? Meaning, I don't want the screen to dim after only 5 minutes. Thanks!

In System Preferences > Energy Saver > uncheck "Automatically reduce brightness before display goes to sleep"
Also adjust the sleep timer to suit.

My iPad keeps crashing when I try to watch video clips on facebook

My iPad keeps crashing when I try to watch video clips on facebook

Hi, Keithrfrommelksham.
Thank you for visiting Apple Support Communities.
I would need clarification on if your iPad is restarting or the Facebook application closes to provided a better answer. However, try going through the troubleshooting steps of the article below. If the Facebook application closes and continues to do so upon going through these steps, you may have to reach out to the developer of the application.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/en-us/HT201398
Cheers,
Jason H.

Hello, I have a MacBook Air, when I was watching a movie it started to freeze, so I turned off. But when I turn it on just the white screen appears nothing else. I looked on other websites, but the methods didn't help.

Hello, I have a MacBook Air, when I was watching a movie it started to freeze, so I turned off. But when I turn it on just the white screen appears nothing else. I looked on other websites, but the methods didn't help.

Try a Safe Mode boot ...
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.

How can I get sound from tv or stereo when watching netflix on MacBook Air?

I have my macbook air hooked up to my tv and want to watch netflix but the only sound is from my macbook. How can I get sound from other sources ie tv or stereo?

Check with Netflix for their system requirements.

My ipod is no longer keeping my tv shows in order, or returning to where i left off when watching an episode. Anyone have a problem like this?

My ipod is no longer keeping my tv shows in order, or returning to where i left off when watching an episode.
I have deleted them and re-added from my computer. On my computer, when plugged into Itunes,
they show as in order by air date--on my ipod, they are random. Also, my shows are not
restarting where I last left off--they are going back to the beginning, so I have to fast forward!
Very frustrating! Anyone have a problem like this?

You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I have updated to 12.1. Still no sound.

I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I updated to 12.1, but still no sound in any clips. Even not on old files which used to work.

bfun
What computer operating system is your Premiere Elements 12/12.1 running on? Can we assume that this audio plays back OK
on the same computer when you are using a computer player independent of Premiere Elements?
What are the properties of these clips that worked before but do not know with regard to sound
For now, I will assume that you are working on Windows 7, 8, or 8.1 64 bit.
Have you checked the Edit Menu/Preferences/Audio Hardware ASIO settings? Do you have any 3rd party audio devices incorporated in your computer environment?
Please delete the Adobe Premiere Elements Prefs file and, if that does not work, then the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. The Windows 7, 8, or 8.1 64 bit path is
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and, in the 12.0 Folder, is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Make sure that you are working with Folder Option "Show Hidden Files, Folders, and Drives" active so that you can see the complete path cited.
Do you have installation files or installation disc with the purchased serial number in case we need to resort to uninstall/reinstall?
We will be watching for your follow up.
ATR

HT202157 When watching shows the program will run for 30 sec. go off then turn back on after another 30 seconds. Why?

When watching programs will run for 30 seconds and then stop and come back on. Why?

"as evidently the fan draws air from the keyboard in order to stay cool."
This is a common misconception. Yes, ambient heat radiates from it, as it does from any part of your machine. But the keyboard was not designed, in any capacity, for heat dissipation and covering it will not raise internal temperatures to any noticeable degree.
Within 14 days of purchase Apple will give you a brand new model.
If you wish, you can download this software and post the temperature output from the machine upon wake. You can take a screenshot of the temperature readings:
iStat Menus, a Mac app by Bjango

Pas 2 air When watching a clip or vidéo only Sound no images

Similar Messages

Maybe you are looking for