Pass the current position value to another swf

I have one swf loading another swf on a release of a button.
In both swf s I have the following function.
I would like to pass the value of the 1st swf function to the
second.
This way the 2nd swf can open at the position where the 1st
left off.
Any ideas on how to do this?
function picture_num() {
current_pos = p+1;
pos_txt.text = current_pos+" / "+total;
Thank you

you need to use the absolute or relative path from the
timeline that contains the 1st function to the timeline that
contains the 2nd function.

Similar Messages

How to get the current zoom value in ID?

Is there any way that can get the current zoom value in InDesign?
Thanks a lot.

You could peek at the widget indicated in your screen shot, at least when that MDI (?) frame is showing.
The window title at kLayoutPresentationBoss, IID_IDOCUMENTPRESENTATION also reflects the value.
Probably best would be the kLayoutWidgetBoss, with its IID_IPANORAMA, GetXScaleFactor() - and GetYScaleFactor()!!!
I just try to imagine how a document would look if these differ from each other ;-) and, even better, how to achieve that from the UI.
Btw, one notification is on kDocWorkspaceBoss, protocol IID_IWINDOW, command kUpdateDocumentUIStateCmdBoss.
Another one: there is a kDocWindowTitleModifyService ...
Edit: of course I should again mention IID_IPANORAMA, observable from kLayoutWidgetBoss subject.
Dirk

Asking for the current position in SAPScript Form

Hello,
is there the possibility to get the current position which is printed at that moment in SAPScript Form? Thanks.
Regards, Lars.

Thanks Naimesh Patel .
Is there anyway to get the PENDING_LINES value in the script?
Because i can't modify the standard print program, i can only edit the Sapscript Form and add in some extra subroutine only.
tnx.

Stepper motor 8SMC1-USBhF and power meter PM100D: how to merge the two VIs into one and make a XY graph of the current position and the power

Hi there,
I have a stepper motor (8SMC1-USBhF) and a power meter (PM100D). I want to measure the power while the stepper motor is moving, and obtain an XY graph with the current position on x axis and the power on y axis. So I just merged the two VIs together by copying and pasting, and created local variables for current position and readout value, and changed them to read, and then linked them to the XY graph, but apparently it doesnt work.
So could you please instruct me how to merge them and obtain an XY graph appropriately?
Attached are the two VIs.
Thank you!
Attachments:
PM100D Simple Example.vi ‏42 KB
StepperMotor.vi ‏97 KB

Hello,
The XY graph requires that each datapoint on the X axis corresponds to a datapoint on the Y axis. To create XY data you will need to creat two arrays of X data and Y data with the same amount of elements then cluster the two arrays together to wire into the XY graph. As an example take a look at the VI snippet below. Is there a specific error being thrown?
Regards,
Isaac S.
Applications Engineer
National Instruments

JavaScript: How do you pass the currently active doc to a dialog in a menu item?

I'm using Adobe Acrobat 11.0 Standard on Windows 7, and I'm having trouble with the menu item that I'm creating. The menu item calls a dialog that prompts the user to select a page in the currently active document. The problem is, I can't figure out how to pass the currently active document to the dialog. I scoured the rest of the documentation, did searches on Google and here in the Adobe forums, but haven't turned anything up. The AcroJS API gives the following solution (found under app/methods/execDialog):
This function attaches the Doc object to the dialog box, then passes the dialog box to the app.execDialog method. The dialog4 object and this function can be at the document level.
   function dotheDialog(dialog,doc)
        dialog.doc = doc;
        var retn = app.execDialog( dialog )
Finally, the following script can be executed from a mouse-up action, for example.
    dotheDialog( dialog4, this );
I did this exact thing, but in the dialog, the value of this.numPages still comes out as undefined, indicating that the current document still hasn't been passed. My own code looks like this:
function dotheDialog(dialog, thisDoc){
    dialog.doc = thisDoc;
    var retn = app.execDialog(dialog);
app.addMenuItem({
    cName: "Test Dialogue Box",
    cParent: "Edit",
    cExec: "dotheDialog(templateDialogue, this);"
where templateDialogue is the name of my own dialog, rather than dialog4. I'm not sure what the retn variable that they declare in the documentation is for, but I've tried it with and without that part, and it doesn't seem to make a difference. Does anyone know how to do this?

Sorry, here it is. It's also just a small modification of something directly from the API, which is why it still has the date bit in it.
var templateDialogue = {
initialize: function (dialog) {
    // Create a static text containing the current date.
    var todayDate = dialog.store()["date"];
    todayDate = "Date: " + util.printd("mmmm dd, yyyy", new Date());
    dialog.load({ "date": todayDate });
commit:function (dialog) {    // called when OK pressed
    var results = dialog.store();
    var inBounds = (parseInt(results["tPag"]) < this.numPages);
    if(!inBounds){
      app.alert({
        cMsg: "Please enter a valid number for the page from which to make the template." +
        "\n" + parseInt(results['tPag']) + " = parseInt(results['tPag']) !< this.numPages = " + // I put this in to see the value of this.numPages,
        this.numPages,                                                                           // and it continues to be undefined.
        cTitle: "Page out of Bounds",
        nIcon: 0, nType: 0
    }else{
      var nButton = app.alert({
        cMsg: "Your template is named " + results["tNam"] + " and is made from page " + results["tPag"],
        cTitle: "javascript",
        nIcon: 3, cType: 0
description:    {
    name: "Personal Data",    // Dialog box title
    align_children: "align_left",
    width: 350,
    height: 200,
    elements:
        type: "cluster",
        name: "Add a page to this documents templates.",
        align_children: "align_left",
        elements:
            type: "view",
            align_children: "align_row",
            elements:
                type: "static_text",
                name: "Template Name: "
                item_id: "tNam",
                type: "edit_text",
                alignment: "align_fill",
                width: 300,
                height: 20
            type: "view",
            align_children: "align_row",
            elements:
                type: "static_text",
                name: "Generating Page: "
                item_id: "tPag",
                type: "edit_text",
                alignment: "align_fill",
                width: 300,
                height: 20
            type: "static_text",
            name: "Date: ",
            char_width: 25,
            item_id: "date"
        alignment: "align_right",
        type: "ok_cancel",
        ok_name: "Ok",
        cancel_name: "Cancel"
Side Question: Out of curiosity, how would you abort if the user clicks cancel? I get the feeling that they don't cover it because it's something you're supposed to already know how to do, but...I don't. Would you just put whatever action you want to take into an if ( button == "Ok" ) type statement so that cancel does nothing?

DAQmx+6009: Reading the current counter value is too slow

I have a thread that runs a software loop that I need to run as fast as possible. One of the things I need to do is poll the current counter value from my 6009, and branch if it's changed from the last time I read it. Over 90% of the time spent in my 1.2ms loop is doing this read. My goal is to get the loop under 50us.
What I really need here is an accurate timestamp (20us or better) for every time the counter changes (up to 1kHz). When I detect a change, I currently get the timestamp by calling QueryPerformanceCounter().
Here's how I create the task:
    DAQmxErrChk( DAQmxCreateTask("",&taskHandle) );
    DAQmxErrChk( DAQmxCreateCICountEdgesChan( taskHandle, line, "", DAQmx_Val_Falling, 0, DAQmx_Val_CountUp ) );
    DAQmxErrChk( DAQmxStartTask(taskHandle) );
And here's the line of code that goes so slow in my loop:
    DAQmxErrChk( DAQmxReadCounterScalarU32( taskHandle, 10.0, &count, NULL ) );

I updated a robot control from a Mac Powerbook with a PCI expansion chasis running Mac OS9, Labview 5 and DAQ to a Mac Mini (intell) with 6009 and 6501 USB cards running Mac OSX, Labview 8.5, and DAQmx-base. I have connected wheel encoders (pule train and direction) to a 6009 and a 6501. It all seems to work, except the tuning of velocity control loops is not as good as before, indicating some delays. The loops run every 100msec (10Hz update) so I expected a synchronisation problem rather than latency. I did some measurements today and found that reading the 2 counters and the 2 digital inputs takes over 20msec.
I get better performance from VISA with a serial to USB converter. I have a program reading 25byte packets every 20msec. Although I did run into the USB latency problem with another serial application. I have a serial device that requires a response t changing CTS (clear to send) in less than 1.2msec, and VISA was taking 1.5msec.
On the same machine I am reading 1024 samples from an analog input every 100msec with out any timing issues - (once I got the incredibly slow start and stop vis outside the loop - they take about 200msec each. Taking the start and stop vis outside the loop reduced my loop time from 450msec (approx) to 100msec. The only problem is that to do this I have to run in continuous mode and can't use an external trigger (it has to restart on every trigger, so the start and stop vis have to be in the loop).
So it appears that I have updated my technology by 10 years only to find that USB is incredibly slow - something that is not in any of the NI doccumentation that I can find. Does NI have any documentation on what to expect in terms of performance from these USB devices and any suggestions on how to get better performance, apart from buying more expensive hardware?
Thanks

Close the current UI and open another one

Hello everyone,
I've got the following code and I want to close the current window and open another one. When i use "System.exit(1);" it closes everything when I use "this.dispose()" it doesn't close anything what could I try to get this to work? any suggestions?
the code is:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
//public class Equip_or_Job implements ActionListener {
public class Equip_or_Job extends Frame implements ActionListener {
    JFrame dFrame;
    JPanel jePanel;
    JButton choice;
    JComboBox jeqid = new JComboBox();
    public Equip_or_Job() {
        //Create and set up the window.
        dFrame = new JFrame("Work with Jobid or Equipid");
        dFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the panel.
        jePanel = new JPanel(new GridLayout(2, 1));
        dFrame.getContentPane().setLayout(new BorderLayout());
        //Add the widgets.
        addWidgets();
        //Set the default button.
        dFrame.getRootPane().setDefaultButton(choice);
        //Add the panel to the window.
        dFrame.getContentPane().add(jePanel, BorderLayout.CENTER);
        //Display the window.
        dFrame.pack();
        dFrame.setVisible(true);
Create and add the widgets.
    private void addWidgets() {
         //Create widgets.
          jeqid.addItem("Chose by Job");
          jeqid.addItem("Chose by Equipment");
          choice = new JButton("Chose");
            //Listen to events from the Convert button.
            choice.addActionListener(this);
          jePanel.add(jeqid);
          jePanel.add(choice);
    public void actionPerformed(ActionEvent event) {
          String sel = (String) jeqid.getSelectedItem();
        if("Chose by Job".equals(sel)){
               InsertNewDates inj = new InsertNewDates();
               //System.exit(1);
               dispose();
          else if("Chose by Equipment".equals(sel)){
               InsertNewDates ineq = new InsertNewDates();
               //System.exit(1);
               dispose();
Create the GUI and show it. For thread safety,
this method should be invoked from the
event-dispatching thread.
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        try {
               UIManager.setLookAndFeel(
                    UIManager.getCrossPlatformLookAndFeelClassName());
          catch (Exception e) { }
        Equip_or_Job eorj = new Equip_or_Job();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
thanks in advance :o)

I'm not exactly sure what you want to do, but...:
dFrame.setVisible(false) hides the current Frame and the application is still running
Best reagrds, Marco

How can we pass the select-option value to modulepool program?

hi,
how can we pass the select-option value to modulepool program ?
Because if i declared select-options in executable program and i used SSCRFIELDS to define push buttons in selection screen.
           My requirement if enter the values to select-options and press UPDATE pussbotton then i want call screen which contains tablecontrol.
           How i get select-option values to PAI of call screen for getting the data from database table to my internal table?

Oh I thought that you have selection-screen and again you are working on dialog programming.
if you want to use select-option directly in module pool then it is not possible.
but you can do other way.
create two varaiables
data : v_kun_low like kna1-kunnr,
         v_kun_high like kna1-kunnr.
use these two variables in layout ,let user knows that he can not give options like gt,lt,eq ,it will be always BT.
and also when you see normal report program,you can use multiple values in either low or high,but here it is not possibel.
use can enter only low value and high value.
when you come to program point of view
declare one range
ranges r_kunnr for kna1-kunnr.
do the coding like
r_kunnr-low = v_kun_low.
r_kunnr-high = v_kun_high.
r_kunnr-options = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
now you can use r_kunnr in select query ,it will work like select-option.
other than this there is no option.
Thanks
Seshu

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

How to get the current selected value of a combo box or a option button?

Hello All,
I want to catch the current selected value of a combo box and also of a option button and want save it into different variables in my code. These option button and combo box are in a SAP business one form which I have created through VB dot.net coding.
But I don't know how to do that, can any one send any example code for this.
Regards,
Sudeshna.

Hi Sudesha,
If you want to get the selected values you can do it as follows: The Combo Box value you can get from the combo box. If you want to get it on the change event, you must make sure that you check when BeforeAction = False. If you want to get an Option Button value you should check the value in the data source attached to the option button.
        Dim oForm As SAPbouiCOM.Form
        Dim oCombo As SAPbouiCOM.ComboBox
        Dim oData As SAPbouiCOM.UserDataSource
        oForm = oApplication.Forms.Item("MyForm")
        oCombo = oForm.Items.Item("myComboUID")
        oApplication.MessageBox(oCombo.Selected.Value)
        oData = oForm.DataSources.UserDataSources.Item("MyDataSourceName")
        oApplication.MessageBox(oData.ValueEx)
Hope it helps,
Adele

How can we pass the master report value in to detail report

Hi All,
My question is how can I pass the master report value in to detail (Child) report filter?
I mean I have one master report if I click on employee name then I have to pass the employee id in to details report filter. Then detail report will display data for that particular employee.
How can I achieve this one in OBIEE?
Please help me to resolve this issue. Thanks in advance for your time and support.

In that case, you should look at using Go Url. In your column formula for the employee name, create a hyperlink to the detail report and pass the employee id.
Take a look at this post: Re: Dyanmic display of the Image Link URL
Thanks!

Why customer exit variable to grab the current month value doesn't work?

In CMOD, input the following code to grab the current month value from the system date:
Grab the month value with System Date
WHEN 'CURMONTH'.
    CLEAR l_s_range.
    l_s_range-low = SY-DATUM+4(2).
    l_s_range-sign = 'I'.
    l_s_range-opt = 'EQ'.
    APPEND l_s_range TO e_t_range.
In Query Designer, create a formula variable CURMONTH processed by customer exit and the dimension under the Currency/Unit tab is "Number". Put the formular variable in the column as a KF. When running the query, the column with the formular variable shows values of "2,0000000" other than just "2" I want for the current month. If the dimension under the Currency/Unit tab is "date", the column with the formular variable shows values of "00/00/0000". Any idea? How to grab the correct current month value which is 2 from the system date.
Thanks!

Oh ok , try the below options, As such I dont see any errors in our code .
Not sure if you have ABAPER's in your team, just check with them once on the FM we are trying to see .
Next , do you hvae 0CALDAY available in your report ? If so try to restrict that field with variable "0DAT" and write the same code you have written for your formula variable , but instead change the variable name to "0DAT" and try if this gets the month . let me know if I'm not clear .

Get the current position within the PBEL Prozess

Hi,
In the BPELConsole I can see the the flow of every PBEL process
instance and thus I see the current position within the process.
How would you get the current position programatically, via SOAP e.g.?
Kind regards,
Martin

Hi,
there is a JAVA API provided by Oracle
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28986/toc.htm
If you really need SOAP, you can build your own Java webservices with this API

How to pass the FORM Fields value by Form Personalization

Hi ALL,
I want to pass form filds values in to procedure. I am calling this procedure through form personalization of that form..... But it's not accepting any form field's value there... when i am passing hardcoded vales procedure is executing fine...
can any one suggest what to do???
i tried with these syntax
TEST_EMP_FP(:ADDR.ADDRESS_ID,'ABC')
TEST_EMP_FP(${item.ADDR.ADDRESS_ID.value},'ABC')
Regards
Ravi

Hi,
Iam calling an SRS from forms personlization. Can any body tell me how to pass the Form field values as parameters to the Reports. (Example when they call this Concurrent request from Transact5ions screen, The invoice number should be defaulted in the report parameter).
Regards,,
Anil.

How to only show data that hasn't passed the current data?

I have some data in an xml file. I can get it to connect fine to an .html page. My question is how do I only show the data that hasn't passed the current date? Can this be done?

The following is the XML file
<?xml version="1.0" encoding="utf-8"?>
<sports>
     <item>
          <date>2010-03-21</date>
          <opponet>Essendon</opponet>
          <location>MCG</location>
          <time></time>
     </item>
     <item>
          <date>2011-01-11</date>
          <opponet>Collingwood</opponet>
          <location>Etihad</location>
          <time></time>
     </item>
     <item>
          <date>2011-03-04</date>
          <opponet>Carlton</opponet>
          <location>Princes Park</location>
          <time></time>
     </item>
     <item>
          <date>2011-03-08</date>
          <opponet>Sydney</opponet>
          <location>SCG</location>
          <time></time>
     </item>
     <item>
          <date>2011-03-21</date>
          <opponet>Brisbane</opponet>
          <location>Gabba</location>
          <time></time>
     </item>
</sports>
The following is the HTML
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:spry="http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script type="text/javascript">
function pad(number, length) {
     var str = '' + number;
     while (str.length < length) {
          str = '0' + str;
     return str;
var dt= new Date()
var today = dt.getFullYear()
    + '-' + pad(dt.getMonth()+1,2)
    + '-' + pad(dt.getDate(),2);
var ds1 = new Spry.Data.XMLDataSet("asdf.xml", "sports/item[date > '"+today+"']", {sortOnLoad: "date", sortOrderOnLoad: "ascending", useCache: false});
alert (today);
</script>
</head>
<body>
<div spry:region="ds1">
<table>
    <tr>
      <th spry:sort="date">Date</th>
      <th spry:sort="opponet">Opponet</th>
      <th spry:sort="location">Location</th>
      <th spry:sort="time">Time</th>
    </tr>
    <tr spry:repeat="ds1" spry:odd=".atl" spry:hover=".alt">
      <td>{date}</td>
      <td>{opponet}</td>
      <td>{location}</td>
      <td>{time}</td>
    </tr>
</table>
</div>
</body>
</html>
Gramps

Pass the current position value to another swf

Similar Messages

Maybe you are looking for