Passing Hundreds of Single Values to a BW Web Query

I have a requirement to pass hundreds of values to BW Web report dynamically based on the user selection. I tried to pass these values using the URL additions. This works fine for certain number of variable values, but does not work if the number of variables values exceed about 30.
Any help in this regrad is appreciated.
Thanks
Amit

Amit,
URLs have length limitations and this could be the reaosn you face this issue.
Also the number of values that can be passed are limited by the size of the SQL query and this might also be a limitation on the number of values that you can pass.

Similar Messages

How to Pass Select-options Single values as Parameter value to Method ?

Hi Friends,
I need to pass select-options values(single values) for s_arbpl to the method "process_percent_planned". Now all single values are in internal table s_arbpl-low field. I need to pass this internal table(s_arbpl-low) values to the method where i will run query based on these single values.In my below code i am passing value through variable w_arbpl. I have defined this parameter in the method.But here only one value is passed to method. I want multiple single values (in s_arbpl-low) should be passed. Please let me know how to correct code.
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
Thanks

hi ,
when you want to pass S_ARBPL AS PARAMETER IN SELEC OPTION
ARBPL SUCH AS
   WIN002
WIN003
WIN004
WIN005
WIN006
WIN007
IN MULTIPLE SELECTION S_ARBPL
THEN
USE
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
LOOP AT S_ARBPL .
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
ENDLOOP.
REGARDS
dEEPAK .
   THEN SELECT THAT
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.

How to hide a single value node hierarchy in the query designer

Hi,
I would like to perform a calculation in the infocube. It concern a count "Nb of different customers" with the following hierarchy : Country / region / City.
This KF would be read at the same time by city, region and country, and certain customers exist in 2 different region, and I have to count them only once by country.
To do this, I added a new record (at the country level when loading infocube) to deduct a number of customers in doubloons.
This line added contain only a country code and the number of cutomers in doubloons (- 23 when I have 23 cutomers in doublons) with revrese sign.
Now, I would like to use this value (-23) to have a right Nb of different customers by country, without showing the not assigned line in the report hierarchy.
How can I hide, in the query designer or the WAD, a single value node from hierarchy (NOT assigned) but take in account the value (-23) at the country level ?
Is there another solution (more simple) to perform this in the infocube ?
For information,
1) The infocube is loaded once per month, and the KF (Nb of different customers" is also performed by month.
2) I can't perform this in the report (performance problem with calculated KF).
thx.

Hi,
the short answer is "you can't", the longer is: The ADF Faces tree component is stamped for better performance. This stamping means that nodes are not rendered as JSF objects but copies of an existing component (just with a changed value). For this reason the nodes don't issue their own query for data and thus cannot be refreshed individually
Frank

Passing Multiple Single values in User Exits

Hello All,
I have a requirement where in, a user could enter either a single value, multiple single values or a combination of a range and single values.
This set of values need to be passed on to a variable with in a user exit. I have been able to get either one single value to pass or one single range. I am unable to pass on multiple single values or a combo of a range and single value from the user entry.
I would appreciate if anyone could help me with the structure of the code to pass multiple single values or combo.
I was wondering if I would need to pass the values into an internal table first and then pass it to the user exit variable. However, as I am not a strong ABAP resource, I am struggling.
Any and all help is deeply appreciated.
Warm regards
Sunil

Hello Marc,
There are two requirements which I was trying to address.
1. IN few queries, the users enter either a range of profit centers or multiple single values in the pop-up window. I need to pass those values from that variable to an variable of type USer Exit to derive partner profit center values with in the query.
For this I have been able to pass values for either a single value or a single range. I am unable to pass on values for multiple single values or a combo of a range and single values.
2. I am trying to create a query for the top 5 customers to be used in the Corporate Performance Monitor. However, when I am trying to use the variable of type "replacement path", the system does not allow me to release it for OLE DB for OLAP.
To obviate this problem, I was hoping to create a variable of typeUSer Exit" and then pass the values from the variable of type "replacement path" to this variable.
Is it a workable solution? I was hoping that the method to pass the values in both the above scenarios might be similar.
Please guide me.
Warm regards
Sunil

Passing multiple single values from R/3 BAPI to BW Query in VC

Hi Experts
I have a VC model where I am calling an R/3 BAPI which is returning a table of customer accounts. I'm trying to go directly from that BAPI to a BW Query and pass the table of accounts into the BW Query.
The BW Query has been set up with a variable to accept multiple single values for accounts, and I have mapped the correct output field from the BAPI to the correct input field on the Query.
The BAPI does not seem to be passing the table of accounts into the Query. If I hard code a single account in the mapping of the BAPI to Query call, the Query successfully returns the data I expect.
Can I pass a table of accounts to a BW Query in this way?
Many Thanks
Tom

Hi
Have you tried with 'Group & Combine' operator. Just add this operator & join your BAPI & BI Query to this. Then in ths configure of this oparator select the 'Accoount' field & gourp the data accordingly. Also specify the aggregation if required. & in the table/chart after the operator select the fields which you want to show.
I hope this is what you are looking for.
Regards
Sandeep

Passing Multiple Single Values from Sender Query to Receiver Query in RRI

Dear All.
We have 2 - Bex Reports ZBEX_1 & ZBEX_2
1. In ZBEX_1 having the fileds data like the below.
Account Doc. Number - Clearing Document --- Amount
12345                  - 65432                --- 100
12346                  - 54321               --- 50
2. In ZBEX_2 having the following data.
Account Doc.Number -- Amount
45342                     - 10
66666                        - 100
65432                       -   10
54321                      - 5
3. I am Traying to create RRI Between ZBEX_1 & ZBEX_2 , with Sender query as ZBEX_1 and Receiver query as ZBEX_2
If I drilldown from ZBEX_1 need to show the following output in the ZBEX_2
Account Doc. Number - Amount
65432                       -     10
54321                      -     5
i.e If Clearing Documnet in the ZBEX_1 is same as Account Doc. Number in ZBEX_2 those Account Doc. Numbers I have to show in the output of ZBEX_2 RRI Report.
Both the records I have to show at a time.
So please suggest me
1. How to pass Multiple Single Values to Next Query using RRI
2. How to Map Clearing Document to Account Doc. Number in RRI.
NOTE: Account Doc. Num length is same as Clearing Document
Please suggest me.
Thanks & Regards,
Kiran Manyam

Your scenario of passing values from multiple records in Source does not suit well for RRI Jumps.
In ZBEX_2 query, create a Replacement path variable on Clearing Document. In that Replacement path variable, use the Replacement with query option and choose the ZBEX_1 as the underlying query source.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bd/589b3c494d8e15e10000000a114084/frameset.htm
When you execute ZBEX_2, what ever clearing document values that ZBEX_1 has will be passed through the replacement path variable as a filter to the ZBEX_2
Hope it helps!
Uday Pothireddy

Passing multiple single values to a Planning Sequence

Hi All,
      We are using BEx Analyzer for planning. We are passing multiple single values for a single variable , to a IP-planning sequence. Planning sequence is only taking the last value passed and ignoring the rest.
Multiple variable values are passed as below:
Name                            Index                 Value
VAR_NAME_1     1     ZCC
VAR_LINES     1     5
VAR_VALUE_1     1     A10000001
VAR_VALUE_1     1     A10000002
VAR_VALUE_1     1     A10000003
VAR_VALUE_1     1     A10000004
VAR_VALUE_1     1     A10000005
These cell references are passed to "command button" through the "Command Range" property.
The values are calculated correctly but for only one Cost center (last one in the list) , In this case only data for the Cost Center "A10000005" is processed and rest of the cost centers are ignored.
What am I missing here? I appreciate your help.
Patch Levels:
SAP GUI 7.10 (Patch 16)
BEx Analyzer 7.X SP 12
Thank you,
Math

Hi Indu Sharma - I have tried several combinations, but did not work.
VAR_VALUE_1
VAR_VALUE_2
VAR_VALUE_3
VAR_VALUE_4
VAR_VALUE_5
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_1
VAR_VALUE_EXT_1
VAR_VALUE_EXT_2
VAR_VALUE_EXT_3
VAR_VALUE_EXT_4
VAR_VALUE_EXT_5
Thank you,
Math

Passing multiple single values in Customer Exit Variables

Hi,
I have one requirement to Pass multiple single values in Customer Exit Variable.
If the user gives 2010 i need to get value previous fisacal year(2009),if its 2009, we need to get 2009.
Just requirement is like how to pass multiple single values?
Thanks.

Hi..
For this create a variable- Types of variable= Characteristics Value> Processing type as Customer Exit-->Reference Char as Fiscal year..
Try this code..
    when 'xxxx'.
      DATA: lv_zp0003_month(2) TYPE n,
              lv_zp0003_year(4) TYPE n.
      CLEAR: lv_zp0003_month, lv_zp0003_year.
      lv_zp0003_month = sy-datum+4(2).
      lv_zp0003_year = sy-datum(4).
If the month is January the year is set to previous year
      IF lv_zp0003_month = '01'.
        lv_zp0003_year = lv_zp0003_year - 1.
       l_s_range-low = lv_zp0003_year.
Else the year is set to actual
      ELSE.
        l_s_range-low = lv_zp0003_year.
      ENDIF.
      IF l_s_range-low = l_s_range-high.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-high IS INITIAL.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-low LT l_s_range-high.
        l_s_range-opt = 'BT'.
      ENDIF.
      l_s_range-sign = 'I'.
      APPEND l_s_range TO e_t_range.
Hope this helps.
Regards.
AKG

How to pass multiple single values to parameter in planning function?

Hi!
I can not pass the variables (multiple single Values) from Input Layouts(BexAnalyzer) to Planning Function Types...Anyone have any idea for setting the parameter in the function types. I use the exit class CL_RSPLFC_BPS_EXITS.
My Parameter Type is Elementary and also use variables allowed

If you want to use the class as in a planning function type, proceed as follows:
1. Create an InfoObject that accepts the name of the function module as a characteristic value. We recommend that you create an InfoObject of type character with length 30 and indicate that this InfoObject is "Without Master Data".
2. In transaction RSPLF1, create a new function type. Chose the "Reference Data" option and enter the name of the class. This does NOT imply that reference data is read automatically, but results from the requirements for implementing the class.
3. On the "Parameter" tab page, create two parameters - one for the exit module and one for the init module. The parameters should be "elementary". Chose the InfoObject you created in step two as the dedicated InfoObject. The names of the parameters are determined from the values of constant P_C_NAME_EXIT_PARAM and P_C_NAME_INIT_PARAM.
4. If you require additional parameters in your function module (called exit parameters), you create these parameters as elementary parameters (with appropriate InfoObjects). Note an additional predefined parameter here - in many function modules, the name of the area is used from which the module is called. The area is not used in BI Integrated Planning but it may be the case that an area was created in BPS which only uses the current InfoCube. For this reason, you can create a parameter with the name specified in constant P_C_NAME_AREA_PARAM by specifying the name of this area to the function module. The value of this parameter is passed on to the function module in the interface as the value of the importing parameter I_AREA. Note that this technology can generally only by used for Basis InfoCubes and simple planning areas (not multi- planning areas or MultiProviders).
You can create additional elementary parameters as long as the names do not correspond to the predefined names. The class automatically recognizes the additional parameters and transfers them to table IT_EXITP in the function modules.
5. After you have activated the planning function type, you can create planning functions and fill the parameters accordingly.

Passing multiple single values in VC

I have a model where ii have 2 views Detail & Summary. Im passing some values from one table to another using a intermediate query. Its not passing multiple values. My wauery has variable set as 'Multiple Single Values'. If i pass a single value it works.
Im on VC FLEX2 SP14.
Cheers,
Vikram

Hi
Go to the properties of first table -> Selection -> Multiple selection. Then join output of this table to your intermediate query through variable port & then drag second table. Also in joining line -> assigned field use 'infoobject name_key' for every field for which you are passing the values.
Regards
Sandeep

How to pass Multi and Singlr value Parameters to DB2 query, which is using in SSRS report for ODBC connection

Hi Guys,
I am using DB2 database in SSRS. I have to pass Single Value and Multi Value Parameters. I tried with Select * From DB2Table Where
Column=@PRM_Name Or Select * From DB2Table Where
Column=:PRM_Name . It is not working and throwing error. Please help me out.
Connection Details: ODBC
Thanks Shiven:)

Hi SKM,
So you mean to say that Go to DataSource->Add Dataset-> Query Type-Text-> Under Query:
click on fx (Expression)-> Write this expression
For Single Value Parameter:
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city = '" + Parameters!City.Value + "'"
OR
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city = '" & Parameters!City.Value & "'"
Keep it in mind if Parameter is String then
It should be in Single quote ''.
Like
="SELECT customer_name, telephone_number, address1, address2, city from MyTable WHERE city
='Hyderabad' "
For Multivalu Parameter:
="SELECT EmployeeID, FirstName, LastName, LoginID FROM SHIVEN.AUDIT Where FirstName
in ('" + REPLACE(JOIN(Parameters!City.Value,","),",","','") + "')"
NOTE:
If your Parameter is Single Value Parameter and You want to enter string values with Coma (,)
separated (Like Hyderabad, Chennai, Delhi).
In this case, you have to use below expression.
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city IN ('" + REPLACE(Parameters!City.Value ,",","','") + "')"
OR
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city IN ('" & REPLACE(Parameters!City.Value ,",","','") & "')"
In above expression: Replace will replace all , with ‘,’ and city IN (‘Hyderabad’, ‘Chennai’,
‘Delhi’) will not throw any error.
Note: You have to write expression in one line in Expression editor for dataset
query
Thanks It is working fine but it is tough job if query is big.
Hi S kumar,
The above approach we use when we have source like DB2, becasue DB2 has some syntactical differences to pass multivalue paramaeter. I tested and it works good, if i am mentioning the query in above format by using Fx button while creating dataset.
but if we want fetch data from view which exist in DB2 and we need to call db2 view in SSRS and pass multivalue parameter in a way we did above then could you please mention the steps and way to achieve this.
Thanks in advance!

How can we Restict the Char single value Variables with , , =

Hi Experts,
How can we Restict the Char value Variables with <, >, <= (without selecting Inverval or only passing single value)
For Example
We have a standard Query 0FIAR_C03_Q1005, in this
New Selection
"1 - 15 Days, Posting Date<=Key Date, Clearing Date>Key Date"
This is restricted with the
Clearing(0CLEAR_DATE)
<Clearing key date(0P_KEYD3) It is a single value SAP Exit Varible
PostingDate(0PSTNG_DATE)
<= Posting keydate(0P_KEYD3) It is a single value SAP Exit Varible
When seeing these 0P_KEYD3, 0P_KEYD3 variables in the New selection screen they looks like >0P_KEYD3, <=0PSTNG_DATE
if you define any custom variables these are looks like =ZV_DATE.
to enable < , >, <= symbols for variables what we need to do.
In other way
Say we created one variable ZV_DATE single value, processing type as customer exit.
for this we populated current day,
Now Requirement is we need to display the all the records which are <= current date,
instead of passing low and high values, i want to restrict the calday <=ZV_DATE
New selection
0calday
<=ZV_DATE
How can we achive this, this is how the business content report having the restrictions
Please sugget me.
Thanks
Chandra
Edited by: Chandra Gandla on Jun 18, 2010 11:01 AM
Edited by: Chandra Gandla on Jun 18, 2010 11:01 AM

Ok,
In the InfoObject 0calday in the query designer under the filter area, under characteristic restrictions right-click over that InfoObject (0calday).
In the next window (select Values for [0CALDAY] Calendar Day in the dropdown box for "Show" choose Value Ranges. Under the word "Between" dropdown box select "Less than or equal to"
Below that word click on the button of the dropdown box Select from list.
In the new window select instead of History Variables and double-click on your variable ZV_DATE.
Click on the right blue arrow to move it to the right.
And there you go.
Tip: It exists a SAP standard variable named 0DAT which is exactly the current date (don't need to use ZV_DATE variable).
Diogo.

Unexpected behaviour in case of single value selection by using share point excel service

If multiple values are passed to pivot table filter using share point excel service, filter is showing “multiple” text on filter. If user expands the filter, the passed values are showing as checked ones.
Example: ‘India’ and ‘US’ values are passed ‘Country’ filter of pivot table using excel services. Filter is showing ‘multiple’ text on filter and if user expands the filter, ‘India’ and ‘US’ values are showing as checked ones.
If single value (India) is passed to pivot table filter using share point excel service, filter is showing value text (India) on filter. If user expands the filter, all values are showing as checked ones.
Ideally it should show ‘India’ as checked one.

If multiple values are passed to pivot table filter using share point excel service, filter is showing “multiple” text on filter. If user expands the filter, the passed values are showing as checked ones.
Example: ‘India’ and ‘US’ values are passed ‘Country’ filter of pivot table using excel services. Filter is showing ‘multiple’ text on filter and if user expands the filter, ‘India’ and ‘US’ values are showing as checked ones.
If single value (India) is passed to pivot table filter using share point excel service, filter is showing value text (India) on filter. If user expands the filter, all values are showing as checked ones.
Ideally it should show ‘India’ as checked one.

Excluding single values on selection screen

Hi,
I'm using standard PCH logical database on a selection screen. Im running the report for multiple org unit, lets say A,B and C.
Within org unit A are more org unit e.g 1a, 1b, 1c and i want to exlude 1c. I added it to the negative single values of the multiple selection but its still coming out on the report.
Any ideas? Listing out all the ones, e.g. 1a, 1b, 2a, 2b, 2c etc isnt really an option of there as hundred and hundreds of them
Thanks.

Hi,
Use FM SELECT_OPTIONS_RESTRICT. Pl. check the sample code:
*& Report Z_TEST_JG
REPORT Z_TEST_JG.
tables: vbak.
TYPE-POOLS: sscr.
DATA:
     v_restrict       TYPE sscr_restrict,
     v_opt_list       TYPE sscr_opt_list,
          v_asn            TYPE sscr_***.
select-options: s_vbeln for vbak-vbeln no intervals.
INITIALIZATION.
PERFORM sub_restrict_option.
FORM sub_restrict_option .
CHECK v_restrict-opt_list_tab[] IS INITIAL.
CLEAR v_opt_list.
v_opt_list-name       = 'EQ'.
v_opt_list-options-eq = 'X'.
APPEND v_opt_list TO v_restrict-opt_list_tab.
CLEAR v_asn.
v_asn-kind            = 'S'.
v_asn-name            = 'S_VBELN'.
v_asn-sg_main         = 'I'.
v_asn-sg_addy         = space.
v_asn-op_main         = 'EQ'.
v_asn-op_addy         = 'EQ'.
APPEND v_asn TO v_restrict-***_tab.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
    EXPORTING
      restriction            = v_restrict
    EXCEPTIONS
      too_late               = 0
      repeated               = 0
      selopt_without_options = 0
      selopt_without_signs   = 0
      invalid_sign           = 0
      empty_option_list      = 0
      invalid_kind           = 0
      repeated_kind_a        = 0
      OTHERS                 = 0.
ENDFORM.                    " sub_restrict_option

Passing large number of values to a WebI prompt from external application

Hello all,
BIt of a strange request this!
I need to abuse the OpenDocument function and pass A LOT of prompt values into a webi report.
The users can select hundreds/thousands of records in an external web based application and click to open a BO WebI report which needs to refresh restricting on the records selected by the user in the other application.
If I do this with OpenDocument i can pass so many values in a list that I'll exceed the limits of the URL length (although I think opendoc itself is shorter than this limit).
So I'm hitting the same limit as these guys...
http://bembengarifin.wordpress.com/2009/02/19/business-objects-opendocument-api-url-length-limitation-gotcha/
Anyone got any ideas?
Was thinking of programatically accessing the document via SDK and adding restrictions or possibly changing open doc to use a POST function... but any ideas on if this would work or any other options?
Cheers,
Jez

Hi Jeremy,
No solution, but a warning note...
I'm afraid that even if you pass the hurdle of the URL length,
you will hit the limit of the in list() number of values on the database side.
So I would go for storing the selected list in the database.
Then you can either create a predefined filter to select the records using the contents of the table,
or bring in the table in the structure, create object and use these to create the where condition in the report.
Needless to say you will probably want to limit this table to just the records from a specific user,
but you stand a better chance of getting to a working solution then the road you're thinking of traveling.
Hope this helps,
Marianne

Passing Hundreds of Single Values to a BW Web Query

Similar Messages

Maybe you are looking for