Passing Soap message in Mime message

Hi, is it possible to Passing Soap message in Mime message. if yes, please direct me to some sample codes. thanks

Your question is sounds little ambiguous. A SOAP message is basically XML over HTTP. So the mime would be XML. What do you mean by "SOAP message in MIME message"?

Similar Messages

How To : Call External Webservice from BPEL and pass SOAP Message to the WS

Hello All-
Greetings to all BPEL gurus. I am currently facing difficulties in calling an External Webservice from my BPEL Process and passing SOAP Message to it. The details are below:
1. The BPEL process, using database polling feature of DB Adapter, will get the records from the database.
2. Transform the message
3. Call the External Webservice and pass the transformed message as the input to it. However the Webservice expects the BPEL process to send SOAP headers in the input message.
I am struggling on how to put the transformed message within a SOAP envelope in the BPEL process.
If anyone had similar requirements and have successfully been able to send SOAP messages from BPEL process to an external webservice, kindly let me know.
Also if there is some kind of documentation or any link in the forum that I can refer, please let me know that as well.
I am new to Webservice integration using BPEL and would really appreciate your help.
Thanks In Advance
Regards,
Dibya

Hi Dharmendra,
I am trying to send a SOAP message from my BPEL process to a web service. I have a complete SOAP message in a complex variable defined in the wsdl for the partnerlink (web service). My problem is that when I invoke the partnerlink it fails even though the content shown in the BPEL console looks valid.
I have set up obtunnel to see what I am actually sending out from BPEL. You mention that BPEL creates the SOAP envelope automatically.
I think that my problem is a result of this automatic SOAP envelope that BPEL is creating. Do you know if there is a way to turn it off?
This is what I see in the TCP monitor, please note the double SOAP env:Body:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <env:Body> <RCMR_IN000002NR01 xmlns="urn:hl7-org:v3" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<env:Header>
<wsa:To xmlns:wsa="http://www.w3.org/2005/08/addressing">http://testhost/CCS/Service_Endpoint</wsa:To>
<wsa:From xmlns:wsa="http://www.w3.org/2005/08/addressing">
<wsa:Address>http://localhost/CCS/Service_Endpoint</wsa:Address>
<wsa:Metadata>
<device xmlns:hl7="urn:hl7-org:v3">
</device>
</wsa:Metadata>
</env:Header>
<env:Body>
<RCMR_IN000002NR01>
</RCMR_IN000002NR01>
</env:Body>
</RCMR_IN000002NR01>
</env:Body>
</env:Envelope>
Any help is appreciated.
Regards,
Aagaard
Edited by: Aagaard on Oct 30, 2008 8:59 PM
Should have mentioned. I am using BPEL 10.1.3.4
Edited by: Aagaard on Oct 31, 2008 8:43 AM
I have opened a new thread for this question so as to not confuse the issue more than necessary.
How many SOAP envelopes do you really need?

2 levels of MIME attachments in SOAP message

Hello,
I'm not a java specialist, and i want to know a few things before i start something wich eventually turns out impossible to do.
i want to create a SOAP message with one attachment. this attachment must be a multipart/mixed MIME message itself:
-- Part1
soapxml
-- Part1 (1 SOAP attachment = MIME message)
Content-Type: multipart/mixed; boundary:"Part2"
-- Part2
subAttachA
-- Part2
subAttachB
-- Part2
subAttachC
--Part2
--Part1
* first of all: should i use a MimeBodyPart objects for subAttachX and create it with MimeMultiPart.createMimeBodyPart() ?
- that MimeMultiPart i create like this: new MimeMultiPart("mixed") ?
- THIS IS THE MOST IMPORTANT: how do i get this MimeMultiPart into the SOAP attachment part ?
could this work:
//MimeMultipart extends MultiPart + constr: new MimePartDataSource(MultiPart part)
MimePartDataSource mds = new MimePartDataSource(MimeMultiPart multipart);
//MimePartDataSource extends DataSource + constr: DataHandler(DataSource ds)
DataHandler dh = new DataHandler(mds);
//will the following line automatically set: Content-Type: multipart/mixed; boundary:"Part2"
//if not, how can i obtain the boundary (="Part2")
AttachmetPart ap = soapMessage.CreateAttachmetPart(dh);
//will i still be able to set the Content-Id
ap.setContentId("miID");
All help greatly appreciated,
Pieter

Did you already tried the way i described ?
because i can't start untill another question is answered, maybe you know the answer:
http://forum.java.sun.com/thread.jsp?forum=34&thread=351252

How to pass soap request message to server?

how i can pass soap request message to server using http request header? the soap
message contains remote procedure call which invokes the method at serverside?
and where i have to write that header request?
so i dont know how to pass the request soap message document
[addsoaprequest.xml]

Hello,
We have a diagnostic tool called Post [1] that will post the request
directly to a SOAP server. You can also try the graphical tool WeX [2]
so you can see what is happening at the wire level.
I may have misunderstood your question and goal. The purpose of the
JAX-RPC [3] API is to provide a high-level abstraction of SOAP
communications such as you describe.
What is your use case?
Thanks,
Bruce
[1]
http://edocs.bea.com/wls/docs81/webserv/trouble.html#1066132
[2]
http://webservice.bea.com/wex.zip
[3]
http://java.sun.com/xml/jaxrpc/index.html
Nisha Kothari wrote:
>
how i can pass soap request message to server using http request header? the soap
message contains remote procedure call which invokes the method at serverside?
and where i have to write that header request?
so i dont know how to pass the request soap message document
Name: addsoaprequest.xml
addsoaprequest.xml Type: ACT Project (text/xml)
Encoding: base64

How to get full SOAP message in WebService

hi,
Is it possible to get SOAP message while Request operation during transaction in WebService.
I tried with Handler, while retreiving message it is having a MessageContext. How to initilize that like example
public boolean handleRequest(MessageContext mc) {
          SOAPMessageContext messageContext = (SOAPMessageContext) mc;
          System.out.println("** Request: "+ messageContext.getMessage().toString());
          return true;
     }while i make a class called SoapHdlr i have implemented all methods including the above.
In that from my class if i want to call the above method i need to pass MessageContext how to give that MessageContext or any other ways to get SOAPMessage fully.
plz can any one guide me there
ThanKQ

I think, there are some concepts missunderstood. First if you use JAX-WS- Metro framework, this kind of handlers will work. Also you should identify your SOAPHandler for your web service. For ex: in Netbeans 6, you can right click on service and select configure handlers. Then you decide your handler.
Then automatically, Metro framework directs SOAPMessages to your SOAPHandler to handle full SOAPs. HandleMessage() method will work.
If you have problem again, just ask.

Adding PDF file as attachment to SOAP message

Hi,
I want to add a pdf file from the hard disk to a soap message as attachment. I have the following code:
// CREATE MESSAGE
SOAPMessage msg= fac.createMessage();
SOAPEnvelope nEnv= msg.getSOAPPart().getEnvelope();
//READ FILE FROM THE HD
String pdfFileName = "somepdffile.pdf";
FileReader fr = new FileReader(pdfFileName);
BufferedReader buffr = new BufferedReader(fr);
String sPdf="";
String line = testB.readLine();
while(line!=null)
sPdf += line;
line = testB.readLine();
//WRITE THE FILE TO BYTE ARRAY AND THEN TO STREAM
byte[] pdfData = sPdf.getBytes();
ByteArrayInputStream stream = new ByteArrayInputStream(pdfData);
//CREATE ATTACHMENT ADD THE STREAM AS CONTENT
AttachmentPart attPDF = msg.createAttachmentPart();
attPDF.setContent(stream, "application/pdf");
msg.addAttachmentPart(attPDF);
return msg;
I GET THE NEXT EXCEPTION:
javax.activation.UnsupportedDataTypeException: no object DCH for MIME type application/pdf
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:851)
at javax.activation.DataHandler.writeTo(DataHandler.java:305)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1089)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:635)
at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:233)
at com.sun.xml.messaging.soap.MessageImpl.saveChanges(MessageImpl.java:356)
at javax.xml.messaging.JAXMServlet.doPost(JAXMServlet.java:192)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2343)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1012)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1107)
at java.lang.Thread.run(Thread.java:536)
javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.messaging.JAXMException: Bad response: (500, Internal Server Error)
at com.sun.xml.messaging.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:93)
at mp.soap.SendingServlet.getPolisPrint(SendingServlet.java:320)
at mp.soap.SendingServlet.doPost(SendingServlet.java:234)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2343)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1012)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1107)
at java.lang.Thread.run(Thread.java:536)
CAN ANYONE TELL ME WHAT THE SOLUTION IS ?
PLEASE HELP ME !!!
Birol

testB == buffr ! Sorry.
IT IS STILL NOT WORKING !!!!!
// CREATE MESSAGE
SOAPMessage msg= fac.createMessage();
SOAPEnvelope nEnv= msg.getSOAPPart().getEnvelope();
//READ FILE FROM THE HD
String pdfFileName = "somepdffile.pdf";
FileReader fr = new FileReader(pdfFileName);
BufferedReader buffr = new BufferedReader(fr);
String sPdf="";
String line = buffr.readLine();
while(line!=null)
sPdf += line;
line = buffr.readLine();
//WRITE THE FILE TO BYTE ARRAY AND THEN TO STREAM
byte[] pdfData = sPdf.getBytes();
ByteArrayInputStream stream = new ByteArrayInputStream(pdfData);
//CREATE ATTACHMENT ADD THE STREAM AS CONTENT
AttachmentPart attPDF = msg.createAttachmentPart();
attPDF.setContent(stream, "application/pdf");
msg.addAttachmentPart(attPDF);
return msg;

PI 7.0 SOAP message reply HTTP 500 and after the fault message

Hello Everybody,
I have the scenario RFC -> XI -> SOAP in synchronous mode.
I use for the mapping XSLT because I have to put some dynamic data comming from the RFC in the header of envelope.
At level of adapter receiver SOAP , I flag the "do not use envelop"
In normal, that works .
When the is an fonctionnal error in SOAP service, it sends me back an error HTTP 500 and afterwards the fault message in a soap envelop format. In that case, how can I pass over this error to treat the envelop because in adapter, it is stopped and it returns a short dump to the RFC.
Is there somebody who can help me with this problem ?
Thanks in adavance for your answers .
Regards.
Eric.

Hi,
In case of a SOAP error while processing the request, the SOAP HTTP server MUST issue an HTTP 500 "Internal Server Error" response and include a SOAP message in the response containing a SOAP Fault element
Thanks,
RamuV

Outbound SOAP Message with Attachment

The requirement is to invoke a web service by sending attachments in the outbound SOAP message. The attachment body needs to be assigned in the message flow, using an element E1 extracted from the message incoming into the flow.
I am trying to use attachments variable to set content-type (text/xml) and body using E1. However, these are not getting assigned to attachments variable, as seen by logging the variable.
I was told that $attachments cannot be changed inside the flow (it is marked black in the console unlike the header and body that are marked green). If that is the case, how do we invoke services using attachments from a message flow?
Any pointers would be appreciated.

Hi,
A SOAP message may need to be transmitted together with attachments of various sorts, ranging from facsimile images of legal documents to engineering drawings. Such data are often in some binary format. For example, most images on the Internet are transmitted using either GIF or JPEG data formats. In this document we describe a standard way to associate a SOAP message with one or more attachments in their native format in a multipart MIME structure for transport.
yes it is possible to send attachment with the SOAP.
SOAP Message Packages
A "SOAP message package" contains a primary SOAP 1.1 message. It may also contain additional entities that are not lexically within the SOAP message but are related in some manner. These entities may contain data in formats other than XML. The primary SOAP 1.1 message in a message package may reference the additional entities. Such additional entities are often informally referred to as "attachments." This section describes how to construct SOAP message packages and how SOAP processors will process them.
A SOAP message package is constructed using the Multipart/Related media type, which is defined in RFC 2387. The rules for the construction of SOAP message packages are as follows:
The primary SOAP 1.1 message must be carried in the root body part of the Multipart/Related structure. Consequently the type parameter of the Multipart/Related media header will always equal the Content-Type header for the primary SOAP 1.1 message, i.e., text/xml.
The MIME Multipart/Related encapsulation of a SOAP message is semantically equivalent to a SOAP protocol binding in that the SOAP message itself is not aware that it is being encapsulated. That is, there is nothing in the primary SOAP message proper that indicates that the SOAP message is encapsulated .
For more details you can refer these links
http://www.w3.org/TR/SOAP-attachments
http://www.w3.org/TR/soap12-af/
regards
Aashish Sinha
PS : reward points if helpful

Soap message with Attachment

Hi All,
I have a requirement wherin I have to send an attachment(image) along with the soap payload.i.e. the soap message contains the payload and an attachment.For eg. the soap message is as shown below:
<?xml version="1.0" encoding="UTF-8" ?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
 <ns1:MT_Soap xmlns:ns1="http://www.adc.com/sample">
 <Record>
 <FieldXML>abc</FieldXML>
 <FieldAthmt />
 </Record>
 </ns1:MT_Soap>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
How can I include the attachment(which is on a local machine) in the above soap message?
Is it posssible to send the attachment in the field "FieldAtthmt"?
If it is possible to send an attachment with the soap message then how can that attachment be handled in XI?
Thanks in advance,
Vikram

Hi,
A SOAP message may need to be transmitted together with attachments of various sorts, ranging from facsimile images of legal documents to engineering drawings. Such data are often in some binary format. For example, most images on the Internet are transmitted using either GIF or JPEG data formats. In this document we describe a standard way to associate a SOAP message with one or more attachments in their native format in a multipart MIME structure for transport.
yes it is possible to send attachment with the SOAP.
SOAP Message Packages
A "SOAP message package" contains a primary SOAP 1.1 message. It may also contain additional entities that are not lexically within the SOAP message but are related in some manner. These entities may contain data in formats other than XML. The primary SOAP 1.1 message in a message package may reference the additional entities. Such additional entities are often informally referred to as "attachments." This section describes how to construct SOAP message packages and how SOAP processors will process them.
A SOAP message package is constructed using the Multipart/Related media type, which is defined in RFC 2387. The rules for the construction of SOAP message packages are as follows:
The primary SOAP 1.1 message must be carried in the root body part of the Multipart/Related structure. Consequently the type parameter of the Multipart/Related media header will always equal the Content-Type header for the primary SOAP 1.1 message, i.e., text/xml.
The MIME Multipart/Related encapsulation of a SOAP message is semantically equivalent to a SOAP protocol binding in that the SOAP message itself is not aware that it is being encapsulated. That is, there is nothing in the primary SOAP message proper that indicates that the SOAP message is encapsulated .
For more details you can refer these links
http://www.w3.org/TR/SOAP-attachments
http://www.w3.org/TR/soap12-af/
regards
Aashish Sinha
PS : reward points if helpful

How to extract the actual XML document from soap message?

My problem is " how to extract the actual XML document from soap message? "
i just want to extract the attachment i.e. (pure XML document without any soap header or envolope).
i could be ver thank full if u could solve my problem.
[email protected]

Hi,
This is some skeleton code for extracting an attachment from a SOAPMessage.
import javax.activation.DataHandler.;
import javax.xml.soap.*;
import javax.xml.message.*;
Iterator allAttachments = message.getAttachments();
AttachmentPart ap1 = null;
while(allAttachments.hasNext()){
ap1 = (AttachmentPart)allAttachments.next();
//Check that the attachment is correct one. By looking at its mime headers
//Convert the attachment part into its DOM representation:
if(ap1.getContentType() == "text/xml"){
//Use the activation dataHandler class to extract the content, then create a StreamSource from
//the content.
DataHandler attachmentContent = ap1.getDataHandler();
StreamSource attachmentStream = new StreamSource(attachmentContent.getInputStream());
DOMResult domAttachment = getDOMResult(attachmentStream);
domAttachment holds an xml representation of the attachment.
Hope this helps.

Web service client needs to share data with a SOAP Message Handler

I have a web service client that is built using WebLogic 10 clientgen. I also have a Soap Message Handler configured that will create the required Soap Headers for the web service call.
Creating these Soap Headers works great as long as the header data is static but the problem comes up when I need to place some dynamic data in these headers. The web service client has this data and somehow needs to pass it to the Soap Message Handler. It looks like I need to somehow have the client place this data in the MessageContext before the call so the data can be accessed by the Soap Message Handler.
How do I get access to the MessageContext from the client or is there a better way to do this?
Thanks in advance for any help you can give.

You may want to check the response to this previous post to see if it yields any ideas for you:
Not able to Pass header info to Microsoft MapPoint WebService using WLS10

Implement a SOAP Request in an SSIS Package that sends a SOAP Message (Env) with Authentication Info, Receives XML FIle?

We need a small SSIS package to pass a SOAP message to a SOAP server and receive the response xml message.
We have the SOAP Endpoint, SOAP Action, and SOAP Message (which contains authentication elements). They work in a Talend Data Integration job (using
Talend's tSOAP component). A screenshot showing the Talend job and the configuration of the tSOAP component
is attached.
We need to implement the same thing in a Microsoft SQL Server 2012 SSIS package but haven't been able to get an SSIS Web Services task to work.
We haven't been able to configure it to pass the SOAP Action and SOAP Message.
How should this be accomplished in SSIS?
kholberger

I guess I was not clear. The Talend job works perfectly (and it took only a few minutes to configure).
I need to replicate the SOAP request function in an SSIS package. I've been trying to configure an SSIS Web Services Task to do that without success.
The SSIS Web Service Task asks for the .wsdl file, which I provide (though the Talend component
does not ask for it), but the SSIS WST does not ask for the SOAP Action or SOAP message. The target web service is protected by a security gateway that rejects the SSIS WST request. Somehow, the Talend tSOAP component sends the
SOAP message, which contains the security definition and authentication credentials (you can see part of that in the screen shot) which the endpoint accepts.
The question is: "How does one implement a SOAP web service request in an SSIS package that sends the SOAP Message".
Thanks.
kholberger

Manipulating SOAP message in Servlet Filter

I need to capture the client IP address and place it in the SOAP message to pass it to the underlying EJB.
I am using a servlet filter to capture the IP Address but dont really know how to get the SOAP message from the HTTPServletRequest.
Any clues ?

Hello,
The easiest way to call a Web Service is to use a Client Library instead of calling the SOAP call yourself.
Can you for your project use a Web Service client stack (JAX-RPC, Axis, XFire, ...) this will create from the WSDL file a set of class and give you a very simple caller class that you can then integrate to your JSP.
I am pointing you to the OracleAS Web Service Documentation section about Web Service proxy.
And some simple how-tos that have specific tasks to create client:
- Web Servics How Tos
So you can see this specific ant target to create a WS proxy:
<oracle:genProxy wsdl="[your URL to a WSDL]"
output="${src.cli.dir}"
packageName="bottomup.client.proxy"
>
<classpath>
<pathelement path="${bld.cli.dir}"/>
<pathelement location="${ORACLE_HOME}/webservices/lib/wsa.jar"/>
</classpath>
</oracle:genProxy>
Regards
Tugdual Grall

How to attach a DOM object as stream to SOAP message?

Hi friends,
I want to attach a parsed XML document (DOM object) to SOAP message, but but I do not want to attach it as a String, instead, I want to attach it as a binary format, given a DOM object.
Any one can help tell me what can I do for it? and what is the content type it should be?
Thanks!

I knew the Java Doc API, actually I can attach text string format, but since what I want is binary data (i.e, serialize form of DOM stream), it does not seem to work as attachment.
1).if I use:
attachment.setContent(doc, "application/octec-stream");it throws:
javax.activation.UnsupportedDataTypeException: no object DCH for MIME type application/octec-stream
2). if I use:
attachment.setContent(doc, "application/xml");it still throws:
javax.activation.UnsupportedDataTypeException: no object DCH for MIME type application/octec-stream
3). if I use serailized form of the document String docString = DOMUtil.serializeDocument(doc);
attachment.setContent(docString, "text/xml");I checked the docString, which is like this form:
<?xml version="1.0"?>
<a xmlns="http://foo.org">
text
</a>
but it throws:
java.io.IOException: Unable to run the JAXP transformer on a stream null
3). it only works if I use serailized form of the document, and set content-type to "text/plain"
String docString = DOMUtil.serializeDocument(doc);
attachment.setContent(docString, "text/plain");Any idea what is wrong here?
Thanks!

Http Header for SOAP message.

Hello,
I need to set some custom HTTP Header when i send the SOAP message to an endpoint.
I tried this..but doesn't solve my requirement.
SOAPMessage soapmsg = messageFactory.createMessage();
MimeHeaders mime = soapmsg.getMimeHeaders();
mime.addHeader("SOAPAction", "xxxx");
mime.addHeader("Sender", "yyy");
SOAPMessage reply = connection.call(soapmsg, destination);
Can anyone please guide me how to set HTTP headers for SOAP?
Thanks,

The following snippet is some code froma stand-alone web service client that I use for testing. It picks up an XML as the payload of the web service, wraps it in a SOAP message and fires it at the web service endpoint.
     System.out.println("Create the SOAP message.\n");
     MessageFactory messageFactory = MessageFactory.newInstance();
     SOAPMessage message = messageFactory.createMessage();
     System.out.println("Creating a DOM object from the JAXB payload.");
     DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
          factory.setValidating(false);
             factory.setNamespaceAware(true);
     DocumentBuilder parser = factory.newDocumentBuilder();
     Document doc = parser.parse("file:payload.xml");
     // Add the HTTP headers.
     message.getMimeHeaders().addHeader("User-Agent", "Mozilla/4.0 [en] (WinNT; I)");
     message.getMimeHeaders().addHeader("Host", "localhost:9080");
     message.getMimeHeaders().addHeader("Content-type", "text/xml");
     message.getMimeHeaders().addHeader("SOAPAction", "http://www.xxx.com.au/wsdl/someWebService");
     message.setProperty(SOAPMessage.CHARACTER_SET_ENCODING, "utf-8");
     SOAPEnvelope envelope = message.getSOAPPart().getEnvelope();
     envelope.addNamespaceDeclaration("n", "http://xxx/webService");
     envelope.addNamespaceDeclaration("xsd", "http://www.w3.org/2001/XMLSchema");
     envelope.addNamespaceDeclaration("xsi", "http://www.w3.org/2001/XMLSchema-instance");
     System.out.println("Adding the payload to the SOAP body.\n");
     SOAPBody body = message.getSOAPBody();
     SOAPBodyElement docElement = body.addDocument(doc);
     System.out.println("This is the SOAP message.\n");
     message.writeTo(System.out);
     System.out.println("\nPutting the payload on the wire.\n");
     SOAPConnectionFactory conFactry = SOAPConnectionFactory.newInstance();
     SOAPConnection connection = conFactry.createConnection();
     URL endpoint = new URL("http://localhost:9080/xxx/services/yyy-webservices");
     SOAPMessage response = connection.call(message, endpoint);
     System.out.println("Payload sent. Closing the connection.\n");
     connection.close();

Passing Soap message in Mime message

Similar Messages

Maybe you are looking for