Password prompt Error with Bex and Excel 2007
Hi Guru's,
We have a problem with end users that have the Bex add-in loaded in Excel 2007 when they are using a different 3rd party add-in. The problem is when they close Excel, they get password prompted for a password protected VB project in the workbook.
I found a MSFT article that sounds exactly like the problem I'm seeing. Link is below.
[http://support.microsoft.com/kb/280454]
Has anyone experienced this problem?
Thanks
Brian Winterlich
Hi Brian:
Take a look at SAP Note 1397278 - "BPC: Pop-up window prompting for a password to unprotect the sheet in Journal template with Office 2007 SP2".
Regards,
Francisco Milá
Similar Messages
-
Hi experts,
I want to know if BW BEX can use the 1million row capability of Excel 2007.
When I am exporting data to excel, it is giving a warning 'Maximum number of rows (65535) exceeded. Result is incomplete.'
This is the limit of excel 2003 version.
Any inputs to this will be highly appreciated.
Regards,
Uday.Hello,
In order to keep the backward compatibility with other Excel versions, BEx Analyzer still have such limitation.
Here is a detailed explanation from SAP Development in this matter:
"Besides the further testing need, we also consider that there are still lots of customers who have not begun using Excel 2007. If there is no such restriction in Analyzer, there might be problem when they have a large number of data to be displayed in Excel 2002/2003.
Furthermore, BEx Analyzer is not a tool for the mass extraction of data, but a viewer/navigator tool for data. And due to the .NET Framework memory utilization limitation, there would be no more than 750,000 cells displayed in Analyzer. Please refer to note 1040454. If we consider the currently existing limitation of 65536 rows, this would mean something around 11 columns. Even when more rows are supported, the maximum number of cells that the .Net process can handle would not increase, which means the displayed columns would be very limited and not practical either.
If you have to display so many rows, you can consider executing the report in the Java Web. This would be a workaround.
We regret to say we could not provide more positive solutions. We are sorry for the inconvenience caused."
Kind Regards,
Marcio -
Can not Sorting by Key Figure with Analyzer and Excel 2007
Hello experts,
We have recently changed to Office 2007, and the funcionality of Sorting by a Key Figure with BEx Analyzer is desactivated.
We have applied the patch 10 for BEx BI 7.10.
Has anybody had the same problem?
Thanks in advanced.Hi Patricia,
Have you got two structures in your query?
Please take a look at the following notes:
1378796 - Disabled Sorting when there is one struct. in the drilldown
1332267 - BExAnalyzer: changes in cell properties dialog / sorting
these should explain why the sort feature is no longer available in certain scenarios.
many thanks
Orla. -
Q regarding Acrobat 9 Standard and Excel 2007
Using 9 Standard and Excel 2007, what settings do I need to change to create a pdf document that looks like my Excel print preview? Some of the graphs within our excel documents are large, say 3 graphs 5 inches wide each, which are then forced to fit the print area using excel's Fit-to page settings. When we attempt to convert these to pdf using 9 Standard, the graphs end up 5 inches wide each, and do not fit on the pdf page. These pages pdf perfecly using Pro 8 but not using 9 Standard. Unfortunately, I can not change the Excel documents, because we have multiple users, some with 9 Standard and others with 8 Pro, all using the same Excel documents.
Thanks in advance for any and all replies.
jimThank you for your reply, however the suggestion did not work. My original problem still exists: headers and footers are resized on each page, some so small they are unreadable. Also (much worse), I did a 'save-as' on a file created in XL 07, saving as XL 97-03. This caused a 'significant loss of functionality' within my file, affecting 286 different cells. I often use XL07's =IFERROR formulas which are not recognized in 97-03.
So... I still have only a partial solution. Adjusting the dpi settings allows me to successfully convert XL 07 files to pdf, but Acrobat 9 Standard is currently useless, because I can not add proper headers and footers.
Anyone else with suggestions? All replies appreciated.
Thanks
jim -
Hi there,
is it possible to get HFM SDK working on Excel 2007 for an EPMA application?
I imported the .bas-file of the "ExtendedAnalyticsBatch"-Sample (VB6) in Excel and tried to get this work. But i cant't even import the necessary dll's.
Has anybody an idea to get this work or first of all to import the dll's? Or isn't it possible with this combination of SDK and Excel-Version?
Google doesn't help that much.
Thanks & best regardsHi,
Please refer to the Note 1240811 - Known issues with BPC and Office 2007.
Hope it helps.
Regards,
Raghu -
hi ,
i am working with OWB and have made an warehouse with OWB .
can I use excel 2007 as BI tools and connect OWB to it and make report ?
cheers
PadidehHi,
Please refer to the Note 1240811 - Known issues with BPC and Office 2007.
Hope it helps.
Regards,
Raghu -
BPC 7 : Excel 2003 and Excel 2007 Conflict
Hi Experts,
I have created a template in BPC 7 MS on my computer which has Excel 2003 version.
But when I try that template on another computer which has Excel 2007. The format (in the format Range) did'nt seem to work or it has diff effect on Excel 2007.
Is there really a conflict between them?? and cannot have different Microsoft Office version?? Or is there An Add-on that we have to Install so that Excel 2003 and Excel 2007 can be used at the same Time??
Thanks,
Bennie JaySorin:
Situation
I also have the same issue with Excel formatting in Excel 2007, and I found a work-around specifically to my issue.
At the format section's CRITERIA, I have one entry: HEADING="New Budget" in the Column direction, apply certain color and number format to the cells of that column. However, I used Excel function CONCATENATE("HEADING=",EVDES("FINANCE",CATEGORY)) to come out with HEADING="New Budget", rather than just typing the string value.
With the above exercise, in Excel 2003 the format would apply no problem, but in Excel 2007, the entire formatting went wild and broke. After I dropped CONCATENATE() and just typed in HEADING="New Budget", the formatting applied OK in 2007.
Data
We are currently on BPC 5.1 SP5
The original report was built in Excel 2003
Question
Is there a setting in Excel that would allow me or bypass the restriction to use Excel functions to come out with CRITERIA definition? -
XLR b1 2007 and excel 2007 excel sheet is empty
hi experts,
i like to use xlr in b1 2007 with excel 2007.
after getting a fail in xl reporter, i change the security settings in excel 2007.
now the excel sheet opens, but there are no values in it.
for example, i made only a query about the business partner (the result is only one column) and like to
import the result in excel 2007 , there is only a headline named 'business partner' . And the column you could see in the xlr filled with the business partner names is empty.
sap b1 and excel 2007 runs on terminal services published by citrix.
has someone an idea to solve the problem?
with greetings from hamburg
michaelHi Michael,
Please make sure that the following steps are performed:
+COM Add-ins
(Excel 2007)
Go to excel
Office button -> Excel Options button
Add-Ins
Manager: COM Add-ins -> Go
SAP Business One XL Reporter should be selected.
+Disabled Items
(Excel 2007)
Go to excel
Office button -> Excel Options button
Add-Ins
Manager: Disabled Items -> Go
SAP Business One XL Reporter should not be listed.
If it is please select it and click Enable button.
+Macro Visual Basic Project
(Excel 2007)
Go to excel
Office button -> Excel Options button
Trust Center -> Trust Center Settings...
Macro Settings -> Trust access to the VBA project object model
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team
Edited by: Ladislav Meszaros on Feb 25, 2009 10:41 AM
Edited by: Ladislav Meszaros on Feb 25, 2009 10:41 AM -
Icloud 2.1 and excel 2007
There is a meanwhile well known issue using windows 7 and excel 2007 or 2010 and have iCloud version 2.0 or 2.1 installed:
Excel files with macros will be destroyed, you`ll get a message like" Excel found unreadable content - I don't know the right translation beause I use the german version. ("Von Excel wurde unlesbarer Inhalt in '[Datei]' gefunden. Möchten Sie den
Inhalt dieser Arbeitsmappe wiederherstellen? Wenn Sie der Quelle dieser Arbeitsmappe vertrauen, klicken Sie auf 'Ja'." - german version).
Is there anything new in iCloud version 2.1.1 - is this issue correced right now?
Until it is not corrected one have to use iCloud version 1.1 instead to solve the problem.Look at this discussion:
Re: Excel 2007 problem opening xlsx files when iCloud control panel is installed
.... and the problem is still not solved (iCloud 3.1.0.40) and I guess will never be. We need to rename or delete the shellstreams.dll or save the excel-files as .xls to solve the problem for ourselves!
What a shame! -
Dear all,
Does Bex analyzer 7.x or 3.x support more than 255 columns in BI7.0 using excel 2007?
JeffHi Jeff Nice question,
I know that Bex in excel 2007 surely support more than 64000 rows .. but coloumns i am not sure, if EXCEL support i suppose it might do ... not sure though ...
But the question is , will such a report be worth an analysis in a BI system ???
Regards
Dennis
§§ Assign some Points if found Helpful §§
Edited by: Dennis on Jul 2, 2008 7:53 PM -
Aborting index build. Too many errors with finding and copying files ...
Hi dears,
I'm using UCM 11g.
I'm trying to start the automatic update cycle. When i start it, it gives me an error message just like :
Indexing aborted at :<time>. Aborting index build. Too many errors with finding and copying files to the appropriate place.+
Can anybody help me about this problem?
Helps will be appreciated.
Erdo
Edited by: erdo on 28.Mar.2013 11:11Read this: error in Collection Rebuild Cycle
and maybe also UCM Indexer - Collection Rebuild Cycle errorring out -
XL Reporter with Windows Vista Basic and Excel 2007
Hi there,
I am facing a problem with my SAP Business One edition. I am using XL Reporter with my Windows XP Professional Edition and Microsoft Office 2003 and/or 2007, and it works perfectly, but when i try to connect my laptop, loaded with Windows Vista Basic edition and Microsoft Office 2007, it does not support.
When i try to add IXXLReporter.dll in Excel 07, it does not work, it neither shows me any error or any confirmation message. When i try to run XL Reporter from SAP, it starts process and hangs.
Can anybody tell me perfectly that whether SAP B1 is compatible with Vista Home Edition or not ...???
If it works, what changes i have to make in my SAP or Vista or Excel, please inform me soon. . .
Thanks
DhanraJThanks to all of you for replying,
I have tried all the above given instructions and suggestions. But still m not able to solve my problem. Anyways i have started using this in my another system, but still waiting for proper solution.
If anybody find answer please reply me.
Thanks Again,
Dhanraj -
Error "A critical error has occurred" Due Microsoft SP2 and Excel 2007
Hi,
I am not able to run a query using BEx after I'm installed the Microsoft SP2. I have 2 errors:
1.- The first has to do with the a pop up window that said creation of item text element_24 failed, it is like 24 lines similar
Then the query is open, and I try to run the report, but then a minute after, the application stop and pop up window appear
"A critical error has occurred" and the excel closes.
Do you have any hint how Can I fix this error?
I have a similar error in the past, but removing the excel (I do not remember the #) security windows updatem was enought, now I do not know if this SP2 has embedded this.Hi ,
I laso faced the same problem, but after implementing SAP note SAP Note 1226977 - BEx Analyzer: Termination when you
insert an analysis table
problem resolved.
Solution
o SAP GUI 6.40
Apply "SAP NetWeaver 2004s BI AddOn Patch" patch level 1801 on your
client workstations. You can find them on SAP Service Marketplace
under:
http://service.sap.com/swdc -> Download -> Support Packages and
Patches -> Entry by Application Group -> SAP Frontend Components ->
SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 6.40 -> Win32 ->
BW700SP18_1801-10001615.EXE.
o SAP GUI 7.10
Apply "BI AddOn Patch for GUI 7.10" patch level 601 for SAP
NetWeaver 7.1 on your client workstations. You can find them on SAP
Service Marketplace under:
http://service.sap.com/swdc -> Download -> Support Packages and
Patches -> Entry by Application Group -> SAP Frontend Components ->
BI ADDON FOR SAP GUI -> BI 7.0 ADDON FOR SAP GUI 7.10 -> Win32 ->
bi710sp06_601-10004472.exe.
See Note 1085218 for information about availability.
hope this will help
br
santosh
Edited by: santosh kumar on Apr 7, 2010 10:10 AM -
Xcelsius 2008 with Excel XML Maps and Excel 2007
Hi guys,
I'm getting great results with the Excel Xml maps feature,
the problem is we upgraded to Excel 2007 and now Xcelsius can't seem to find the Xml Map connections any more.
I did some testing, it seems that an XML connection created in Excel 2003 works fine, but Xcelsius just doesn't see any connection created with Excel 2007.
Any ideas?
Thanks!
RoyMark,
It seems like that may have been something to look into prior to purchasing the product. You're a creative guy though, try to work around with the Excel sheet in the backend. I'm sure you can manage what you need with only one connection.
The key to being an Xcelsius expert is to know how to work around any problem.
Do you need this to be live data? If not, you could try the Excel -> Import External Data function.
I hope that helps!
Thanks,
Brian -
ALV download to EXCEL -- probs with SAPGUI 6.40 and EXCEL 2007
I have a method in an ALV grid which performs a dowload to excel
Here's the method
method download_to_excel.
field-symbols:
<fs0> type standard table,
<fs1> type standard table.
assign g_outtab1->* to <fs0>.
assign g_fldcat1->* to <fs1>.
call function 'LVC_TRANSFER_TO_KKBLO'
exporting
it_fieldcat_lvc = <fs1>
is_layout_lvc = m_cl_variant->ms_layout
is_tech_complete = ' '
importing
es_layout_kkblo = ls_layout
et_fieldcat_kkblo = lt_fieldcat.
loop at lt_fieldcat into lt_fieldcat_wa.
clear lt_fieldcat_wa-tech_complete.
if lt_fieldcat_wa-tabname is initial.
lt_fieldcat_wa-tabname = '1'.
modify lt_fieldcat from lt_fieldcat_wa.
endif.
l_tabname = lt_fieldcat_wa-tabname.
endloop.
call function 'ALV_XXL_CALL'
exporting
i_tabname = l_tabname
is_layout = ls_layout
it_fieldcat = lt_fieldcat
i_title = sy-title
tables
it_outtab = <fs0>
exceptions
fatal_error = 1
no_display_possible = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type 'S' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endmethod.
Basically the method converts the GRID table I'm displaying into the format requred for FMOD ALV_XXL_CALL' -- the field catalog is slightly different but no big deal here.
This works fine when downloading to EXCEL 2003 but short dumps when trying to do the same thing for EXCEL 2007.
Workstation is running Windows XP / SP2 build 2600 in both cases.
Any fixes etc or should I stick with EXCEL 2003 until forced to upgrade.
Cheers
jimboHi all
Seems the problem disappeared after applying the latest patch to SAP_GUI 6.40.
I haven't tried SAP_GUI 7.0 yet.
Thanks anyway
Cheers
jimbo
Maybe you are looking for
-
Looking for a USB 3.0 HUB recommendation....
I have bought at least 2 different USB 3.0 Hubs and while they work with my MBP Retina they only support devices at USB 2.0 speed. I have converted my Time Machine to a USB 3.0 Enclosure and when connected directly to my MBP Retina I get 3.0 speeds.
-
Excluded Agent restricts our Buy on Behalf approval process
We are implementing a step in the BRF that if a shopping cart is bought on behalf of another user ( we will call him A ), then the first approval will go to user A. however, the standard determination of excluded agents within SRM 7 is to use the doc
-
I need Document to define how the KPIs in BI Apps working
For Example what is the calculation for Any KPIs ? To understand how it's work. I know how can i make a KPs, but i need to know how oracle build the KPIs in BI Apps. Thank you.
-
in table control there are data can be changed , i input some data,but in the module MODULE item_info_modify INPUT. MODIFY gt_tc FROM gw_tc INDEX item_info-current_line. endmodule. i think this is not worked ,why??
-
Officeject 6500 all in one Printer
I recently had to have my computer system XP restored to solve some issues. Best Buy did the work and reinstalled my software Now the functions on the control panel do not work. For instance enlarge or reduce etc. I believe these did work without