Patch 10.1.2.0.2 infrastructure

I am installed patch set 4960210 after a fresh install of 10g release 2. I shutdown the mid-tier before apply the patch to the mid-tier server. It went well.
I am not sure what I need to do before apply the patch to the infrastructure server. It seems like the metadata repository database has to be up, and OID has to be up. What about the infrastructure instance itself.
Please help.
Thank you,
Jane

The readme for the patch has very detailed instructions !
OID needs to be up as you say plus the other components. But there is a good prereq checker before you run it.
If worried do a backup of $OH , the inventory and the IASDB then give it a try, if it fails just restore.

Similar Messages

  • Cisco Prime Infrastructure patch 2.1.1 - installed or no?

    I’ve reinstalled new Cisco Prime using the newest ISO image version 2.1.0.0.87. After that I installed the patch file (pi211_20140630_01.ubf) for version 2.1.1 and rebooted the server. After that I don’t see any information in CLI that I have version 2.1.1 installed. When I type sh ver I still see version 2.1.0.0.87. The only information which confirm this information is a “Software update” site in GUI interface where status of the patch is "Installed". Is this normal behavior?
    Regards
    Lukas

    Patch installed through ubf not showing info in CLI and login page
    CSCup78886
    Description
    Symptom:
    After installing the "2.1.1" patch (filename pi211_20140630_01.ubf) for Prime Infrastructure 2.1.0.0.87 through the Administration > Software Update page and issuing an "ncs stop/ncs start" sequence from the CLI, the version information on the Prime Infrastructure login page, the CLI output of "show version" or Help > About pages does not indicate version 2.1.1.
    Conditions:
    Workaround:
    At this time, there is no workaround. Please confirm proper patch installation on the Administration > Software Update page. Column "Installed' with the value "Yes" and column "Pending Restart" with the value "No" indicate that the 2.1.1 patch is indeed correctly installed.
    Last Modified:
    Jul 22,2014
    Status:
    Open
    Severity:
    6 Enhancement
    Product:
    Network Level Service
    Known Affected Releases:
    (1)
    2.1(1)

  • I cannot find Oracle Grid Infrastructure Patch Set 2 for windows x64

    So maybe i'm stupid, but i've searched metalink every way i can think of to find the patches mentioned in the following preinstall instructions for 11.2.0.2 for windows
    "To upgrade Oracle Grid Infrastructure release 11.2.0.1 to Oracle Grid Infrastructure release 11.2.0.2, you must first do at least one of the following:
    * Patch the Oracle Grid Infrastructure release 11.2.0.1 home with the patch 9413827 and patch 9706490.
    * Install Oracle Grid Infrastructure Patch Set 1 (GI PSU1) or Oracle Grid Infrastructure Patch Set 2 (GI PSU2)."
    I've searched in Patches and Updates and https://updates.oracle.com.
    I've got a 2 node 11gR2 (11.2.0.1) RAC on Windows 2k8 that i want to patch to 11.2.0.2 before implementing as production. I can find all the Unix flavored patches, but not the Windows Patch.
    Feel free to make fun of me for using Windoze or not knowing how to use metalink, whatever you like, as long as you include a url to the Patch I'm looking for.
    thanks
    John

    The first thing that i tried was the out-of-place upgrade, which failed 3/4 of the way through. This left me with a circumstance where i couldn't use srvctl to administer my RAC because of version mismatched files. The RAC appeared to be up but administering it was impossible no matter what home i set. I deinstalled 11.2.0.2 grid and the 2nd node of my RAC was broken and couldn't see the ASM instance at all. i actually had to modify the windows registry to get the 2nd node to behave properly.
    That's when i read more carefully the installation instructions for the upgrade and came across the text i included.
    "To upgrade Oracle Grid Infrastructure release 11.2.0.1 to Oracle Grid Infrastructure release 11.2.0.2, you must first do at least one of the following:
    Patch the Oracle Grid Infrastructure release 11.2.0.1 home with the patch 9413827 and patch 9706490.
    Install Oracle Grid Infrastructure Patch Set 1 (GI PSU1) or Oracle Grid Infrastructure Patch Set 2 (GI PSU2).
    Adding nodes to a cluster during a rolling upgrade is not supported.#
    Oracle Clusterware and Oracle ASM upgrades are always out-of-place upgrades. With Oracle Grid Infrastructure 11g release 2 (11.2), you cannot perform an in-place upgrade of Oracle Clusterware and Oracle ASM to existing homes."
    This mentions both the out-of-place upgrade and the need for the intermediate patches to be installed first. I'm not sure what to believe at this point. I read the above instructions as saying the intermediate patches need to be installed BEFORE the out-of-place upgrade would be successful, but i can't say that i understand why that would be the case.
    Has someone done a successful upgrade on Windows from 11.2.0.1 directly to 11.2.0.2?
    I appreciate y'all's help.
    thanks,
    JR

  • Upgrade from Cisco Prime infrastructure verion 2.0 to 2.1

    Request you all to please let me know if i have to install point patch before upgrading the cisco prime infrastructure 2.0 to 2.1.

    After moving to 2.1, there is a 2.1.1 point patch currently available.
    You should install that and the latest device package (4.0 as of this posting).
    As always, the Release Notes are the best place to check the current available updates.

  • 9.2.0.3 Patching Woes

    All,
    Couple of patching problems with 9.2.0.3 integrated patchset on AIX 5L
    1. The patch was successfully applied to the Infrastructure. After the patch, however, the DAS UIX images where all *$%@ up. EmWebsite did not have that problem. I checked the DISPLAY variable and it was set.
    2. When I applied the patch to the middle-tier (it is on the same box as the infra), it did not ask me for the Portal, or sys password. The log says patch was successfully applied. But, when I try to login to Portal, it says the the partner application has expired.
    I cannot find any notes or tips on Metalink or Forums.
    Please help !!

    I've never done an upgrade on a multi-master setup, but I would be pretty confident that an usual upgrade (with the replication stopped) should work, especially if the new features introduced and bugs fixed don't touch replication (which I suspect is the case from 9.2.0.3 to 9.2.0.8, but this should be verified). The replication could be restarted after the upgrade. Do you have an environment to test this out?
    Daniel

  • Missing Security Patches

    1) Are there any useful facilities for admins or auditors to idenitfy misisng security patches associated with oracle EBS and supporting infrastructure? I know there are websoites saying which patches are out there but I could do with some sort of "this is what you are missing" type reports.
    2) Do Oracle have any useful whitepapers on best practice patch management for EBS, i.e. how to test, steps for restore if its affects anything etc.

    Hussein Sawwan wrote:
    release 12 EBS, 11g Oracle.The release does not matter here.
    Do any of the links you provide produce a missing patches report that would be easy to read for management/non EBS adminsYes.
    Patch Wizard FAQ [ID 976688.1]
    New Required Patches for Patch Wizard, Patch Manager, and Oracle Application Change Management Pack for Oracle E-Business Suite Releases 11i, 12.0, and 12.1 [ID 1267768.1]
    Patch Wizard Overview Videos [ID 1210479.1]
    Patch Wizard : Overview [ID 1077813.1]
    Diagnostics Toolbox: Recommended Patch List and Patch Wizard [ID 1196135.1]
    Oracle Applications Patching Procedures
    http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121adpp.pdf
    http://forums.oracle.com/forums/search.jspa?threadID=&q=Patch+AND+Wizard&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    http://search.oracle.com/search/search?search_p_main_operator=all&group=Blogs&oq=Patch+Wizard&x=0&y=0&q=Patch+Wizard+weblog%3A%3DstevenChan+site%3Ablogs.oracle.com
    Thanks,
    HusseinThanks Hussein,
    I am going to read through those links, but could you do me a bit of a cheat sheet on how to get a report on all missing security patches for our EBS and supporting infrastructure, and what it will look like. I.e. a basic 1-5 steps on where to get this report.

  • Installing Patch 9654983 help needed

    Hi I am trying to install patch 9654983.
    the read me says to take the following steps:
    unzip p9654983_11201_<platform>.zip
    cd 9654983
    opatch apply
    however ... when i try and run the command opatch apply, i get the following error:
    [matt@localhost 9654983]$ opatch apply
    bash: opatch: command not found
    Any ideas??

    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    Sorry im really new to both oracle and linux ... the following are the pre-installation instructions:
    2.3.1.1 Environments with ASM
    If you are installing the PSU to an environment that has Automatic Storage Management (ASM), note the following:
    For Linux x86 and Linux x86-64 platforms, install either (A) the bug fix for 8898852 and the Database PSU patch 9654983, or (B) the Grid Infrastructure PSU patch 9343627.
    For all other platforms, no action is required. The fix for 8898852 was included in the base 11.2.0.1.0 release.
    2.3.1.2 Environment Checks
    1.
    Ensure that the $PATH definition has the following executables: make, ar, ld, and nm.
    The location of these executables depends on your operating system. On many operating systems, they are located in /usr/ccs/bin, in which case you can set your PATH definition as follows:
    export PATH=$PATH:/usr/ccs/bin
    2.3.1.3 One-off Patch Conflict Detection and Resolution
    For an introduction to the PSU one-off patch concepts, see "Patch Set Updates Patch Conflict Resolution" in My Oracle Support Note 854428.1 Patch Set Updates for Oracle Products.
    The fastest and easiest way to determine whether you have one-off patches in the Oracle home that conflict with the PSU, and to get the necessary conflict resolution patches, is to use the Patch Recommendations and Patch Plans features on the Patches & Updates tab in My Oracle Support. These features work in conjunction with the My Oracle Support Configuration Manager. Recorded training sessions on these features can be found in Note 603505.1.
    However, if you are not using My Oracle Support Patch Plans, follow these steps:
    1.
    Determine whether any currently installed one-off patches conflict with the PSU patch as follows:
    unzip p9654983_11201_<platform>.zip
    opatch prereq CheckConflictAgainstOHWithDetail -phBaseDir ./9654983
    2.
    The report will indicate the patches that conflict with PSU 9654983 and the patches for which PSU 9654983 is a superset.
    Note that Oracle proactively provides PSU 11.2.0.1.2 one-off patches for common conflicts.
    3.
    Use My Oracle Support Note 1061295.1 Patch Set Updates - One-off Patch Conflict Resolution to determine, for each conflicting patch, whether a conflict resolution patch is already available, and if you need to request a new conflict resolution patch or if the conflict may be ignored.
    4.
    When all the one-off patches that you have requested are available at My Oracle Support, proceed with Section 2.3.2, "Patch Installation Instructions".
    1. im unaware if I have Automatic Storage Management (ASM),?
    2. how do i check to Ensure that the $PATH definition has the following executables: make, ar, ld, and nm.
    3. [matt@localhost 9654983]$ opatch prereq CheckConflictAgainstOHWithDetail -phBaseDir ./9654983
    Invoking OPatch 11.1.0.6.6
    Oracle Interim Patch Installer version 11.1.0.6.6
    Copyright (c) 2009, Oracle Corporation. All rights reserved.
    The argument "./9654983" does not exists.
    PREREQ session
    Argument(s) Error... Patch base location is not valid.
    Please check the arguments and try again.
    OPatch failed with error code 135
    [matt@localhost 9654983]$

  • Oracle Collaboration Suite Slow Performance

    Hi,
    I have encountered with problem with OCS 10.1.2 with following information:
    Hardware : DL-380G5
    Operating System : OEL 4 update 5 64 bit
    Oracle Product : Collaboration Suite 10.1.2
    The installation has been done in three server as follow:
    Server 1: Application Tier (OCS component such as mail, calendar , discussion , ...)
    Server 2: Infrastructure (Oracle Single Sign on)
    Server 3 : Infrastructure (Oracle Internet Directory)
    Patch Information : Cumulative Patch 10.1.2.4 (Note: 406284.1) + Mandatory Patch after 10.1.2.4 ( Note:
    423515.1) + Patch 10.1.0.5 on Infrastructure layer
    have been applied on Application tier and Infrastructure.
    Problem_ Everything goes well after reboot of all 3 servers and refresh but after 2 hours nobody can
    connect to OCS services due to slow performance
    Only restarting the servers cause the users can connect to OCS services again.
    Any Idea will be appreciated.
    Edited by: Oralinux on Oct 29, 2009 5:08 PM

    Did you ever find out why this was happening? We seemed to have developed a similar issue and we have had a Severity 1 level SR for 4 days now and no one seems to able to work it out.
    cheers
    paul

  • Demo license of NCS

    Hi,
    I am migrating WCS to PI 1.3.
    I read from the guide that we need to migrate to NCS 1.1.1 first and we can get the demo license from Cisco.
    but the demo license is only 100 unit, but my WCS has 300 license units.
    How can I import the wcs data to NCS?
    Besides, I also read from the guide that I need to install patch in NCS before migrating the data to PI 1.3
    can I install the patch before i import the data from WCS?
    thanks.

    I never used a demo license when doing a migration. Typically you need the same ap license when migrating but all NCS will do is complain. As far as the migration goes, install the license prior to doing anything. Export the WCS which needs to be on 7.0.220.0 or later and then import that to NCS. Then you need to patch NCS before upgrading to Prime infrastructure. Now when you get your license, you will need to order the prime license. If your using a VM, make sure you take a snapshot before you install the patch and upgrade just incase something failed or else you will be rebuilding NCS and importing the data again.
    Sent from Cisco Technical Support iPhone App

  • Is there any third party component required to run SAP Mobile ?

    Hi Gurus,
    What 3rd party mobile components are required to run SAP mobile (E.g DB2e)? Do any of them require separate licensing thatu2019s not covered by the SAP licence?
    Thanks in Advance,
    Dharani

    Hi Larissa Limaravo,
    Thank you so much for you detailed answer.
    Can you please let me know your view on this please.
    Q4 What do we get in terms of remote management (i.e. any of the security points above plus deployment of software and remote support)? Is there any benefit in moving to 7.1 from 7?
    Thinking of the supplied XAPPS that are available with SAP mobile, how configurable are they in terms of:
    Q5
    u2022     Adding new fields (both for info in the field and for engineers to return additional data).
    u2022     Changes to validation.
    u2022     Changes to workflow within the application.
    u2022     Anything else!
    Q5.1  Is there an IDE or tool available for implementing configuration changes?
    Q5.2  What weu2019re after here is a feel for the overall influence on functionality, expressed as a percentage (e.g. 0 no influence to 100% complete control), which can be achieved with configuration?
    Q5.3  Typically, who is responsible for making configuration changes, would it be possible to do this in-house or would we require experienced consultants? If this is a split between the 2 could we get a feel based on the most commonly requested changes?
    Q5.4  With regard to customizing supplied XAPPs or writing our own, would we be talking Java development through webdyn pro? How would customisation impact patching and upgrades of the SAP infrastructure?
    Q6  Our assumption is that SAP mobile solutions are only suitable for SAP backend systems owing to the tight integration. In your experience, has anyone successfully implemented a SAP mobile solution on a non SAP backend system? Would you, as experienced SAP consultants, recommend such a venture?
    Q6.1  How would we go about integration of other systems on the mobile device? For example GPS, Barcode, Cameras or other applications like boiler diagnostics. Again, can you break this down into tasks that can be performed in house vs. tasks that are typically performed by experienced consultants?
    Q6.2  This is a bit of a vague question so I must apologies in advance: Company will ultimately control our production environment but weu2019d be interested in having some control to be able to deploy configuration changes without having to bother them. If you could suggest if and how this arrangement would be implemented, then I can approach company to assess the feasibility.
    Thanks in Advance,
    Dharani

  • Opatch auto vs. opatch apply?

    In the 11g GI PSU 3 I'm looking at, some Cases require "opatch auto" vs. "opatch (n)apply". At our site I've been told "we don't use opatch auto. Only opatch apply." This has been with 10g. We haven't done much patching with 11g, having only gone to 11g semi-recently.
    Are there any good reasons not to use opatch auto? e.g. is it more likely for something to go wrong if we do? Or must be use OCM to use opatch auto? We don't currently use OCM. I would like to know the basic differences between these two opatch switches. And if it would ever be justifiable to prohibit the use of the "auto" patch--and if so, why.
    Edited by: Dana N on Sep 27, 2011 6:26 AM

    tbrinkmann wrote:
    Hi,
    does anyone can help me understand the READ ME entry from PSU Januar 2013.
    2.3 OPatch auto for GI
    The Opatch utility has automated the patch application for the Oracle Grid Infrastructure (GI) home and the Oracle RAC database homes when run with root privileges. .....
    (README) --> Oracle Grid Infrastructure Patch Set Update 11.2.0.3.5 (Includes Database PSU 11.2.0.3.5) - 14727347That means you would be using a switch with Opatch auto and it would apply the patch on the GI and Oracle Homes automatically.
    --> Case 1: GI Home and the Database Homes that are not shared and ACFS file system is not configured.
    As root user, execute the following command on each node of the cluster:
    #root@host>opatch psu12013 -ocmrf OPatch/ocm/bin/ocm.rsp
    The user is root. OPatch cannot continue if the user is root.
    OPatch failed with error code 255I think the command should be
    #>opatch auto psu12013 -ocmrf OPatch/ocm/bin/ocm.rsp
    Aman....

  • Product Hub PIP & Guaranteed Delivery

    Hello,
    Question: How does the integration scenario for Product Hub PIP ensure 'Guaranteed Delivery'.
    The question has arisen because if we look at the AIA Developer's Guide - it advises that for async one-way flow there is an 'Asynchronous Message Exchange Pattern'. This pattern proposes integration scenarios should utilize Queue/Topic (at the end of an milestone) to persist the message - which in turn ensures 'Guaranteed Delivery' & 'Scalability'.
    But if we look at the design of the Product Hub PIP, we do not see any queue/topic in the business process flow for product. So how to ensure that if PIP is used as integration between Product Hub and E-Biz Suite, then all messages published from PIM will always reach E-Biz Suite.
    Any efforts to explain this are appreciated.
    Thanks,

    Hi,
    Here are the steps to follow on edelivery. For example if you need the FP and PIPs for AIA 2.5 Linux x86
    1. Step 1: select the product pack - Oracle Application Integration Architecture
    platform: Linux x86
    2. Step 2: select Oracle Application Integration Architecture Release 2.5 Media Pack for Linux x86
    3. Step 3: Download part number V18465-01 - Oracle Application Integration Architecture Release 2.5 Linux x86
    4. Step 4: Additionally you will need to download all patches for this PIP and other infrastructure components required such as SOA Suite, database etc.
    Suzanne

  • Exchange 2013: Content Index State Failed

    I am running two, two node DAG's with Exchange 2013.
    One DAG pair is running 5 databases with Server 2012 Standard and the second DAG pair is running Server 2008 R2 SP1 Standard with a single shared database.
    No matter what I try, ALL 6 databases show "ContentIndexState: Failed" with "ContentIndexErrorMessage: An internal error occurred for the database or its index.".
    I have tried rebuilding the indexes manually, automatically and manually copying the database files between servers.  I also receive errors when trying to failover the databases because the content index state is failed.
    In my test environment I have a very similar setup working fine with no issues.
    Please let me know what I can try to get this resolved.
    The error I receive when running the following set of commands is:
    suspend-MailboxDatabaseCopy dag2db1\mbox1
    update-MailboxDatabaseCopy dag2db1\mbox1 -deleteexistingfiles
    [PS] C:\Windows\system32>update-mailboxdatabasecopy dag2db1\mbox1 -deleteexistingfiles
    Confirm
    Are you sure you want to perform this action?
    Updating database copy DAG2DB1\MBOX1 on server MBOX1
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [?] Help (default is "Y"): a
    WARNING: Seeding of content index catalog for database 'DAG2DB1' failed. Please verify that the Microsoft Search (Exchange) and the Host Controller service for Exchange services are running and try the operation again. Error: Therevwas no endpoint listening
    at net.tcp://localhost:17063/Management/SeedingAgent-0A2745DF-4522-42AB-9115-5DDE9EDEF1C612/Single that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details..
    [PS] C:\Windows\system32>

    Hi Folks,
    Here we go;
    "On
    August 14th, we announced the removal of the
    MS13-061 Security Update for Exchange Server 2013 due to an issue where the patch changed settings for the search infrastructure, placing the content index for all databases into a failed state.  As of today, we have released updated security updates
    for both Exchange 2013 RTM CU1 and Exchange 2013 RTM CU2."
    Details below;
    http://blogs.technet.com/b/exchange/archive/2013/08/27/now-available-updated-release-of-ms13-061-security-update-for-exchange-server-2013.aspx
    Yavuz Eren Demir
    After installing this patch (Exchange2013-KB2874216-v2-x64-en.msp) seeding of the databases was impossible.
    Error:
    warning
    Seeding of content index catalog for database 'Database02' failed. Please verify that the Microsoft Search (Exchange) and
    the Host Controller service for Exchange services are running and try the operation again. Error: Could not connect to net.tcp://localhost:3863/Management/SeedingAgent-F293698C-B2D0-40CA-A2C3-FB37982E708712/Single. The connection attempt lasted for a time
    span of 00:00:02.0592000. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:3863. .
    Looking at the two services mentioned in this warning I've noticed the Microsoft Exchange Search Host Controller (HostControllerService)
    was disabled
    After Changing it to Automatic and enabling it, the problem was salved

  • Cisco Prime Infrastructure patch 2.1.1 - HA issue

    Hello,
    I have a problem with the Cisco Prime Infrastructure patched to version 2.1.1. I did exactly what Installation Guidelines say:
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1-1/release/notes/cpi_rn.html
    – Install the Prime Infrastructure 2.1.1 patch by using the Administration > Software Updates page on the primary server.
    – Restart the primary server.
    – Verify that the patch installation is complete. If you find the installation complete, decommission and reinstall the secondary server and add it back to the primary server.
    I reinstalled HA server and I'm trying to add it to HA but I get "Failed to authenticate - Primary(xx.xx.xx.xx) and Secondary(xx.xx.xx.xy) PI version does not match"
    Can you help me with that? What I'm doing wrong? or maybe this patch is not prepared to work in HA mode?
    Regards

    Symptom:
    The installation instructions of PI 2.1.1 patch in a High Availability environment are not accurate and following these steps will result in the inability to re-pair the Primary and Secondary servers.
    Conditions:
    If the instructions are followed, then when the user attempts to re-pair the servers, an error will be encountered:
    "High Availability Registration Failed - Failed to authenticate - Primary (x.x.x.1) and Secondary (x.x.x.2) PI version does not match".
    Instead, the following steps have proved to work correctly:
    1. Upload and install patch on primary.
    2. Upload and install patch on secondary.
    3. Stop NCS services on secondary
    4. Stop NCS services on primary
    5. Start services on secondary
    6. Start services on primary
    7. Re-pair HA servers from primary
    Workaround:
    Workaround 1:
    On the secondary, go under root and issue:
    # cd /opt/CSCOlumos/bin/
    # ./hamode.sh primary
    Answer 'yes' when prompted.
    Go to admin user and execute
    # ncs stop
    After the services are stopped:
    # ncs start
    When the services are back up, login to the secondary GUI as you would login to a primary server
    Go under Administration > Software update, upload the patch and install it.
    Go to admin user and execute
    # ncs stop
    After the services are stopped:
    # ncs start
    When the services are up, go under root and issue:
    # cd /opt/CSCOlumos/bin/
    # ./hamode.sh secondary
    Answer 'yes' when prompted.
    Go to admin user and execute
    # ncs stop
    After the services are stopped:
    # ncs start
    After the message that services started successfully on the secondary, initiate a new High Availability configuration from the primary. Now the synchronization between the two servers should succeed.
    Workaround 2:
    Redeploy or reinstall the Primary server, restore the backup which was taken prior to applying the patch, reconfigure the High Availability and continue with the steps described in the Conditions section.
    Further Problem Description:
    Release Notes have been updated with more precise instructions.
    Known Affected Releases:
    (1)
    2.1(0.0.85)

  • Patching mid tier and infrastructure tiers.

    Greetings!!!
    I am having some questions on patches and hope someone can help me here.
    We have two Oracle Application Server machines both on Windows 2003 servers 32-bit and both are on 10.1.2.0.2 release.
    The first machine is hosting HTTP Server, Forms (OC4J_BI_Forms), Reports, Webcache (Application/Mid tier). Release is 10.1.2.0.2
    The second machine is hosting OID+Metadata repository, Single Sign-On, HTTP Server, and OC4J_Security (Infrastructure Tier). Release is 10.1.2.0.2.
    I am now applying patches to both the servers.
    Here are the steps I have:
    1. Apply the Patch 4505133 on the Infrastructure (10.1.0.5 Patch Set)
    2. Apply the Patch 5983622 on the Mid-tier. (10.1.3 patch set)
    I have already completed step (1). I patched the infrastructure database from 10.1.0.4 to 10.1.0.5.
    Am I missing the other step to patch Infrastructure tier components? Should I also patch the HTTP Server and the Oracle Home on infrastructure tier? I am not talking about the infrastructure database here. I am already done with that step.
    If I only patch the Mid Tier with #5983622, then won't the mid tier will be on 10.1.3 release and infrastructure components (HTTP Server, SSO) will be on the same old 10.1.2.0.2.
    The primary requirement is that I need to upgrade HTTP servers on both the tiers to the same level. Can you suggest me the equivalent of patch 5983622 for infrastructure tier and the way forward? Will appreciate any answers!!! TY.

    Hello,
    I think u are mixing some things here.
    In order to apply 5983622, u have to update database version is 10.1.0.4 to 10.1.0.5. (patch 4505133) That must be done before patching the two homes of Application Server.
    Patch 5983622 is for Application Server. U have to apply it on Infrastructure Tier and on Application/Mid tier Home, in order to update Application Server from 10.1.2.2 to 10.1.2.3.
    regards,
    Pedro

Maybe you are looking for