N73 ME slow / lag when pressing buttons & keys

My N73 is just 3 days old but whenever I try to start composing messages, the keys lag for the first 5 or so characters, I have to wait for X seconds just to type in another character. It also happens when I edit contacts names or just about every time I try to do something that involves keying/pressing the buttons.
It also happens when my phone is in stand by for a couple of minutes, then when I try to unlock the keys, I would have to try it 4 x until it gets unlocked successfully... It also happens when I access the menu. Sometimes I have to press the menu key 3-4 x just to get to the actual menu page.
I did install the sms accelerator, although I didn't have problems sending SMS.
But now what? How to get rid of the key lag?
Anyone?
FYI: I have the latest firmware.Message Edited by mymaria on 12-Mar-2007
08:07 PM
Message Edited by mymaria on 12-Mar-2007
08:16 PM
♥ \m/ai ♥

actually, i have my messages on the phone... i think the problem lies on the key response time because it can't cope up with fast keying, i think.
yeah there is an sms accelerator for n73, i got it at the n73 support page.. although i don't know what it's really for anyway as I don't see any changes on the phone's performance.
♥ \m/ai ♥

Similar Messages

Focus lost when pressing ALT key

Hi,
is there any way to prevent the focus to be lost when pressing ALT key in an AIR app??
I tried event.preventDefault() in KEY_UP and KEY_DOWN events but it doesn't work
when the user press the ALT key, the stage loses the focus
thanks

I am now having trouble with the same issue. I have tried removing the ALT key from the Input Map from my frame and the component I'm having trouble with. I have also tried setting my own action in the action map for this. We also tried listening for the key pressed event and putting focus back to the combobox where I want focus to remain. I am now working on trying to use the processKeyEvent method to handle this, but have not had any luck as of yet with that. If anyone has some help on this, I'd greatly appreciate it!

When pressing soft key continuously error will occured

In midp1.0 when pressing soft key continuously during the time of program execution in doesn't
affect thread value.But the same program in midp 2.0 thread value will affected and error will
occured.is there any difference between midp 1.0 and midp 2.0 when pressing key press?

Please use CLDC and MIDP forum for midp related issues.
http://forum.java.sun.com/forum.jspa?forumID=76

Winxp is gone when pressing option key at startup, "no bootable device"

Hi everyone,
I'm new to mac and recently bought a MBP.
I did bootcamp and installed windows xp and SP3 at the same time in a small partition, I remember it was 8gb.
I had no problem booting in to xp or mac after the installation, I can even press option and see both OS.
But now I cannot boot to windows, at startup while pressing the option key, I only see mac os and not windows. I also tried rebooting from the startup disk utility, but it has a black screen saying "no bootable disk found." It wants me to insert a bootable disk, so I inserted the window xp disk and has to force restart the laptop. Then it started a process like trying to load the files to reinstall win xp, of course I didn't let it.
Now when I went back to disk utilities I see that the winxp partition is 9.2gb, it was 8gb when I made it.
Recently I split my mac partition into 2, I tried to do the time machine back up, but then it takes too long so I canceled it and deleted the partition. I wonder if this affects my window xp partition.
Now I cannot see winxp when pressing option key at startup, but can see it in startup disk utility, and disk utility. When I boot from startup disk utility, it shows "no bootable device, insert cd, and press anykey..." I tried verifying and repairing the parition in disk utility, didn't work.
So this is all I did before I cannot boot into xp.
1. made new partition for winxp (formated partition as FAT)in bootcamp and installed winxp + sp3. everything was fine.
2. create another partition, and call it "data" <-want to create this for data only, while the other half is for software installation only.
3. create another partition for time machine, but when running time machine it says the partition is too small, so I delete it and make the partition bigger.then I run time machine, but since it takes way too long, I canceled it, and deleted the partition.
4. in winxp, had installed kapersky anti-virus 9.0
Now, I have 3 partitions: 1 for software installation, 1 for data, and 1 for winxp.
So why can't I boot to windows? Did things overwrite? Please help me, I'm so frustrated. Thank you.
Message was edited by: nobutan
Message was edited by: nobutan

Thanks fortuny,
I had read the link you suggested. And since my partition for windows is FAT32, as noted in the website, I can edit the boot.ini directly in my mac. In my mac, it already shows that the partition # is 3,
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(3)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN/fastdect
but my window os is not booting.
Like the link noted, "it crashes with the "I'm sorry, we couldn't start up Windows. Do you want to start in Safe Mode?" screen. You'll also see a flicker of the BLUE SCREEN OF DEATH, which flashes an UNMOUNTABLEBOOTVOLUME error so quickly you won't have a chance to read it. This was the hint that the BOOT.INI entries were incorrect..."
According to the boot.ini in the site, my boot.ini file was already set up correctly, so why can't windows startup?
Also something I don't understand from this:
"NOTES: If you didn't follow the instructions and chose to PARTITION the existing volume instead of RESIZING then ADDING a partition, this appears to mess up BootCamp's boot loader and you may have to start again. Step 3, however, may offer you a way out."
When I did the 3rd partition, I did it in Disk Utility in mac, not from the mac os cd, and I split the mac partition into 2, I didn't do the "resizing," then using the unused space to make new partition... I wonder if this is causing the normal booting...
So do I start again by deleting my data partition or start from reinstalling windows? If the problem can be fixed without installing windows, of course, it would be great.
Message was edited by: nobutan

N95-1 turns off when press any key

I was using normally the phone when suddenly it turned off, I thought was the battery but it's go, I tried other battery with the same result. I turn on the phone, and when I press any key it turns off. If the keyboard keeps locked the displays says yeah unlock the keys, but when i unlocked and press any button it's turns off, I made the hard reset trick, but this couldn't solve the problem, help me please

I have the exact same problem with my Nokia Luna 8600, turns on normally, but as soon as I press any key, it turns off and changing battery nor formatting didnt help.
Any ideas?

How can i select the next column instead of next row when press enter key

I need to know how can i select the next column instead of next row when i press the enter key.By default ,when i press enter key the next row is selected and the column remain unchanged but I wants opposite that is the row should remain unchanged but column index will changed.
Thanks to all.

Well, the right arrow key will already move you to the next column, so the easiest way to do this is to modify the InputMap to have the Enter key invoke the same Action as the right arrow key.
You can search the forum for my "Table Actions" (without the space) example that will show you how to do this.

SC workflow start when pressing button held

Hi,
When we create a SC and then press button hold the approval workflow is started in status waiting. The problem with that is that it already has decided the approvers from the values in the SC when hold was pressed. If we then changes something in the SC that has an impact on the approval it is not considered when we press button order. The workflow continues with the first found approvers.
I have tested to set BBP_WFL_SECURITY to 2 (restart workflow when changes), but this does not seem to have an impact before the SC has been ordered.
Is it possible to turn of the start of the workflow until the button order is pressed? We do not want the workflow to start on hold button and then just wait for the order button to be pressed before continuing..
All tips are appriciated!
Regards,
Kicki Wennerbo

Hi,
Which WF are you using for the SC approval?
BR,
Disha.

Is there a fix for a slow response when pressing stop?

When pressing stop (either by mouse or pressing spacebar), there is always a one to two second delay before the music actually stops. Why is this? Any fix?
I have been using Digital Performer and that always stops on a dime. It is a bit annoying to hear another 1- 2 seconds of music after hitting "Stop". Any ideas?
This is not a latency issue.
Thanks

A lag setting in like that could also be a sign of needed RAM exceeding available RAM - at which time parts of the contents of RAM have to be temporarily stored to or retrieved from disk.
That lag is from the OS needing to read RAM content from disk, or the OS needing to write RAM content to disk - and more often than not, both simultaneously. Only after this has been done ("swapping") is the correct RAM content - that's needed for Logic to 'stop' - in place and can the command actually be executed.
Installing more RAM should help, though you might want to check the (real) RAM use of your laggy Logic project via Activity Monitor first, just to be sure.
One of the big RAM eaters, apart from sampled acoustic instruments, is Flex. used RAM can grow quickly when Flex editing. If that happens it may be wise to quit and restart Logic from time to time.

Nokia 5610 new phone hang when press enter key; it...

Anyone facing this problem? I just brought couple of days only, I found the phone hang when i switch ON it and press Enter key after the PIN code. It looks no response and keep displaying on that screen.
Solved!
Go to Solution.

15-Sep-2008 09:25 AM
merceleong wrote:
I sent it to reinstalled the software and it looks ok now but, anyone know for new phone, how long the battery will last? My unit found only two days without playing music all the time.
Just an advise
On it's first time fully charge and discharge - vice versa for three times. After that don’t drain your battery every day to 10-20% of its charge. You can actually expect battery problems by draining the battery frequently.
Roughly every 30 charges, deliberately discharge your battery to 10-15%, and fully charge to 100% afterwards.
This will help maintain the accuracy of the “fuel gauge” on the device (your battery meter or scale). It has nothing to do with the battery memory but helps maintain the accuracy of the device’s percentage of battery charge left.
Good luck

IE 9, 10, 11 - Slow/Lag when typing

*UPDATE*
So just installing the latest display driver (AMD HD-3xxx) from Dell's website did NOT fix the issue. For whatever reason (still researching) The ATI Catalyst software needs to be installed also. So for testing, I imaged an Optiplex 780 (on board
video) and I had no Issues with IE. I then installed the same image on an Optiplex 9020 with a Video Card. I made sure I had the latest driver in MDT as well. Once it was imaged and I tested IE I had the same issues. Installed the Catalyst software and teh
issues ran away. I then uninstalled the video card from the computer, reimaged the Optiplex 9020 using the on board drivers and had no issues with IE.
Link to AMD and BINGO: http://developer.amd.com/community/blog/2010/03/16/ie9-takes-advantage-of-the-gpu/
A few users have brought this to my attention, I had not tested to much since IE is not my default browser, shame on me. I am imaging Dell Optiplex 760's and 9020's with a custom image and having it patch after installing applications. IE
11 is being loaded on when this happens. For whatever reason IE will lag when typing in certain page fields. It does it when searching in Google or if I go to my companies OWA page. For testing I went ahead and built a machine from scratch (using Windows 7
USB) ran all of the latest patches, installed all of the same software and what do you know IE works without any issues. So on the computer that was having issues, I tried safe mode and no issues when using IE. Here is the kicker, If I roll back IE all the
way to IE 8 it works perfectly, once I started going to 10 and then 11 is when I noticed the issues.
I have been racking my brain for the past week on this issue. I have rebuilt the task sequences for both machines even when using the install files from a disk to image a machine, as soon as I run Windows Updates IE breaks. Any thoughts? Oh and I have tried
EVERYTHING in regards to IE, no add ons, reset settings, inPrivate, everything
Alex

Hey Keith,
You may have hit it right on the nose. Turns out the CAB file I had was outdated and I had to grab the latest video driver from Dells website. The Optiplex 760's we run have a video card and what I believe is happening is when imaging the machines out the
Catalyst software is not being installed which is causing the errors (I think). As soon as I updated the display driver and installed the supporting software with it the issues went away. I updated MDT with the latest video driver and am going to image a machine
to see if that is all it needed. If it does need the Catalyst software installed I'll be adding that to my base image so I don't run into this again.

Exception CX_WD_BAD_ARGS when pressing button

Hi,
I am currently working on a web dynpro application that has a tab strip on the main view a separate view for every tab.
In order to be able to store the data, I added a SAVE button to the main view. Unfortunately, the exception CX_WD_BAD_ARGS is raised, when I press this button.
When I put the button on one of the tab strips, it works fine.
Could you tell me, why I get this exception, when I put the button on the main view?
This is the part of the coding, where the exception occurs:
367 *======================
368 method Onactionsave_Mw.
369 *======================
370 " typecasting from generic to specific arguments
371
372 * data declaration
373   data:
374     wdEvent like Event.
375   field-symbols:
376     <lor_Param>   type Wdr_Event_Parameter.
377
378   wdEvent = Event.
379
380   data:
381     VIIEW type ref to If_Wd_View.
382   read table Event->Parameters[]
383     with table key Name = `VIIEW` assigning <lor_Param>.
384   if ( 0 ne sy-Subrc ).
>>>>>     raise exception type Cx_Wd_Bad_Args
386       exporting
387          Parameter = `VIIEW`.
388   endif.
389   " Cx_Sy_Conversion or similar problems may occur
390   " but this is caused by illegal usage !!!
391   f_Internal_Api->assign_Untyped_Reference(
392     exporting data_Ref = <lor_Param>-Value
393     importing data =     VIIEW ).
394
395     Me->f_Appl_Class->Onactionsave_Mw(
396     !viiew = !viiew
397     !wdevent = !wdevent
398   ).
399
400 endmethod.
Best regards,
Fabian

Hi Fabian,
I think that the problem is not, in which view you have called the action, but the parameter at the action handler. Just delete the parameter VIIEW, and it should work. You may declare only those parameters of an action handler, which are filled by the UI element, when the event is triggered (the list of action parameters is available in the documentation of the UI elements).
Regards, Regina

Very Slow / Lag When Screen Moves...

Hi Guys,
I’m really a newbie when it comes to AS3 – so really a total newbie when it comes to using it to develop iPhone games/apps, but I have used AS2 for years now
I’ve been trying to do a simple test – Just use mouse events to move a screen around depending on what is pressed. No Characters/hittests/etc.
What I have created works great on my pc – very smooth, and even on the iphone, the controls work as expected – but the problem is how SLOW everything is running. Pressing the "UP" arrow - makes the screen move, but very SLOW and Jumpy.
I have tried using onkeyframe and using a timer – but both are very slow.
Typically when I made games in AS2 – the “level” would just be a single BIG movieclip – as shown in “Example A” – but this was very slow on the iphone, so I tried a tile based approach (“Example B”), which reuses the same movieclips, it just moves them and renames them – trying to cut memory usage down, only loading what is needed - but still its slow. The total size of the "level" is only about 3x bigger than the iphone visible screen.
I have made sure all variables are done correctly: var thisVar:int = 10; etc and have enabled cache as bitmap. I have replaced all vector graphics with jpegs, and followed the guide on how to optimize code for iphone development – but nothing seems to work, everything just lags as the screen moves/updates – but everything works great on my pc.
Can someone please explain what I am doing wrong? Is there a way to cache the whole map before the game loads? Which is the correct way to make an iphone game where the level is bigger than the default screen - tile based or a large level graphic.
Thanks so much for any help! I’ve been trying to get this simple test working for 3 days now – but documentation is limited at the moment.
Cheers!

This should be better:
the function addPage() is what I used to test Bitmaps
import flash.display.Shape;
import flash.display.Sprite;;
Multitouch.inputMode = MultitouchInputMode.GESTURE;
var currentGalleryItem:Number = 1;
var totalGalleryItems:Number = 4;
var slideCounter:Number = 0;
var gallery_items:Sprite = new Sprite();
addChild(gallery_items);
addPages();
stage.addEventListener (TransformGestureEvent.GESTURE_SWIPE, fl_SwipeToGoToNextPreviousFrame);
// create pages
function addPages():void
addShape(0, 0, 0xff0000);
addShape(768, 0, 0x00ff00);
addShape(1536, 0, 0x0000ff);
function addPage(xPos:Number, yPos:Number):void
var p:Bitmap = new Bitmap(new bookPage());
p.x = xPos;
p.y = yPos;
gallery_items.addChild(p);
function addShape(xPos:Number, yPos:Number, col:uint):void
var s:Shape = new Shape();
s.graphics.beginFill(col);
s.graphics.drawRect(xPos, yPos, 768, 1028);
s.graphics.endFill();
gallery_items.addChild(s);
function fl_SwipeToGoToNextPreviousFrame(event:TransformGestureEvent):void
if(event.offsetX == 1)
if(currentGalleryItem > 1){
currentGalleryItem--;
slideRight();
else if(event.offsetX == -1)
if(currentGalleryItem < totalGalleryItems){
currentGalleryItem++;
slideLeft();
function slideLeft(){
gallery_items.addEventListener("enterFrame", moveGalleryLeft);
function slideRight(){
gallery_items.addEventListener("enterFrame", moveGalleryRight);
function moveGalleryLeft(evt:Event){
gallery_items.x -= 76.8;
slideCounter++;
if(slideCounter == 10){
gallery_items.removeEventListener("enterFrame", moveGalleryLeft);
slideCounter = 0;
function moveGalleryRight(evt:Event){
gallery_items.x += 76.8;
slideCounter++;
if(slideCounter == 10){
gallery_items.removeEventListener("enterFrame", moveGalleryRight);
slideCounter = 0;

How to delete rows from multiple tables when pressing button

Hi, I'm wondering how do I delete a row from two different tables at the same time when I press the Delete button. Both tables have GROUP_ID as their primary key.

Nevermind! I realized that I had "reset" before my process to delete from the 2nd table.

Turn Off Vibration When Pressing Menu Key

A user suggested unchecking haptic feedback to turn off the vibration when you touch certain keys. I did not work or maybe we are talking about two different vibration functions of the Droid 2.
When you press any of the four function keys at the bottom of the device (e.g. Menu, Home, Back, Search key) or swipe right to unlock, the device does a small vibration. Is it possible to turn that feature off?

unimatrix001 wrote:
A user suggested unchecking haptic feedback to turn off the vibration when you touch certain keys. I did not work or maybe we are talking about two different vibration functions of the Droid 2.
When you press any of the four function keys at the bottom of the device (e.g. Menu, Home, Back, Search key) or swipe right to unlock, the device does a small vibration. Is it possible to turn that feature off?
Are you sure you are looking in the right area? I believe the one you are looking for(May be as above since it has "blur" integrated) should be under
Menu button --> Sound Settings --> Haptic Feedback (this one may be different due to Ninja Blur)
there should also be one for the android keyboard
Menu button --> Language & Keyboard --> Android Keyboard --> Vibrate on keypress.

No sound when pressing volume keys

When I press the volume keys on my keyboard, it doesn't make the sound that lets you know the level of volume. It sometimes works, but mostly its not working. Please help.

I am having the same problem: any luck finding a solution?

N73 ME slow / lag when pressing buttons & keys

Similar Messages

Maybe you are looking for