Patch In Place installation of JRE8 (update 25)

How can we do a silent/unattended Patch In Place installation of Java Runtime Environment 8? The installation defaults to a static installation even if we specify the STATIC=0 command line option. Also we would like to download the Enterprise Installer (msi) for JRE without a Java SE commercial agreement and support contract.

Hi Micheal, and a warm welcome to the forums!
I wonder if those numbers are valid when it said couldn't install because newer version was already there!?
What I might try is to delete any Security ,pkg in Library>Reeipts... or move them out anyway.
Or reapply the last big Combo update while Safe Booted...
Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, apply combo update, Repair Permissions again, reboot when it finishes.
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html

Similar Messages

JRE 7 Patch-in-Place Configuration not working as documented

According to all of the documentation I have read, the default JRE installation mode is patch-in-place.
http://docs.oracle.com/javase/7/docs/webnotes/install/windows/jre-installer-options.html
http://www.oracle.com/technetwork/java/javase/jre-install-137694.html
http://docs.oracle.com/javase/7/docs/webnotes/install/windows/patch-in-place-and-static-jre-installation.html
However, after either manually installing JRE 7 to a specific installation directory (e.g. not on C:), or by specyfying the the INSTALLDIR on the command line, a subsequent JRE 7 update will uninstall the previous JRE from the desired installation location and install the current JRE in the default location (i.e. C:\Program Files\Java\jre7).
Is there some magic installer switch, registry entry, configuration file, etc. that will force the JRE installer to upgrade the existing installation in its existing location?
Note - these are not static instllations. Also, I am working with the 64-bit version; I don't know if the same applies to the 32-bit version, as I have not tested it because I require the 64-bit version.
-Jeff

At this site there is an explanation of this issue: probably LabVIEW don't support partial scrolling.
If I understood what they write, in Intellimouse 8.0 and above, Microsoft implemented a kind of patch for applications that don't support partial scrolling.
And so without Intellimouse, none of these applications supports partial scrolling.
I'll try to install the latest version of Intellimouse, but I think NI developers should patch LabVIEW to support partial scrolling. On the same site MS gives a link to the MSDN information dedicated to developers on how to handle partial scrolling.
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

Installing J2EE Patches during WAS installation

Hi Himanshu Limaye here.
I am currently installing J2EE patches using SAPCAR utility.However one of the .sar files is not getting uncarred properly.
The file name is: J2EERT15_0-10001982.SAR
I repeated the procedure by again downloading the same file from SAP Service Market place.But,I am still unable to resolve the error.
As a result I am unable to complete the application of J2EE patches during WAS installation.
Could anyone brief me regarding the JSPM or SDM method of installing J2EE patches.Thanks.

Hi Himanshu,
You please specify the exact error which is being displayed while uncarring.
Are you applying a support package or just a patch.
Regards,
Abhishek

I Installed the Apple Software Installer 1.0 Update Tonight

Hello-
I am not sure if this latest Software Update messed things up, but there are a lot of problems with my MBP now that I just noticed tonight after I installed this Apple Software Installer Update 1.0.
First off I am unable to watch any of the online videos like CBS nightly News, some of the BBC News Videos, as far as I can tell anything that shows its content on a video screen from the companies website. I updated Flash Player about 2 weeks ago to the current version because I started keepng Flash updated to the current version, someting I wish I would have never started. when I went to CBSnews.com, clicked on CBS Evening News, nothing (not even a video screen) shoes up but in small letters it says Please Upgrade Your Adobe Flash Player. According to adobe Flash (current versions for MacOS-Safari) I have the correct Flash version and I have watched these news broadcasts seveeral nights on ABC, CBS, and many other videos on mostly news websites. On ABC I noticed it tonight since I installed this Apple Software Installer 1.0 Update, it shows a blank video screen but in the middle it says, "This content requires Adobe Flash Player - Ver 10.1. (on top) and on the bottom is a link that says " Click here to get the latest version of Flash."
The latest version of Flash for a Mac using Safari is what I installed about 2 weeks ago and is 11.1.102.64. I am not sure what ABC means by 10.1. The versions confuse me, especially if I look in Safari under "Help"--> "Installed Plug-Ins", it usually just gives the first couple of numbers, but now I cannot even bring up "Installed Plug Ins" under Safari---Help---Installed Plug-Ins. it just gives me a blank screen.
Is it possible to uninstall an installed update? it is a major deal. any suggestions on what I should try? I know people who hate Adobe Flash (seems like there are a lot) will say get rid of Adone Flash. But whay would it stop showing me what is on the Installed Plug-Ins Page? Before, I just did this the other night, I open a new tab, go to Help on Safari's Menu bar to Help, then Installed Plug-Ins and it usually fills up the blank New Tab page with all the Installed Plug-ins. Down toward the end it will show me that Shockwave Player, I think Mac calls it is installed, and it just gives the first few numbers of the current version that is installed. Now I get no Installed Plug-Ins.
thanks for any assistance. I looked up in the suppot articles how to uninstall an installed Update. I was going to repair permissions, but I have only ever done that using the Operating Disk. that is how I was taught by a genius bar person several years ago, and I just kept up with it. when I repair permissions using Disk Utility from the dock, let's say I do a test run and 20 permissions come up, I repair them and nothing changes, but if I use the OS disk and repair the permissions, if there are a lot it will get rid of them all but it usually takes 2 runs at it. I know this is different from what most others say,

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

I have iphone4. I tried 2 update some applicaStions when I was in USA, updates installation were not complete. Coming back 2 my country Egypt, I am unable to complete the installation of the update; it is still waiting. Is there a way other application ?

I have iphone4. I tried 2 update some applications when I was in USA, updates installation were not complete. Coming back 2 my country Egypt, I am unable to complete the installation of the update; it is still waiting. Is there a way 2 complete installation other than deleting the application that contains important data?

I have iphone4. I tried 2 update some applications when I was in USA, updates installation were not complete. Coming back 2 my country Egypt, I am unable to complete the installation of the update; it is still waiting. Is there a way 2 complete installation other than deleting the application that contains important data?

Imessage doesn't work after the installation of the update 6.0

imessage doesn't work after the installation of the update 6.0

iMessage will not work until it's activated.
Switch iMessage OFF. Double tap Home button and delete Messages in multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
Switch iMessage back ON.

IMessage doesn't work after the installation of the update 5.1

iMessage doesn't work after the installation of the update 5.1

I am unsure whether my issue relates to updating to OS5.1 but seems coincidental that I have only had the problem for the last few days since updating.
I can use iMessage without a problem although some messages are delayed in being sent or received recently. However, I can no longer send MMS picture messages. I have spoken to my provider who has been through all their relevant settings checks. I have restarted the phone (iPhone 3GS), I have tried turning off iMessage to send MMS but still nothing works.
I've had no issue sending MMS picture messages since owning the phone right up until a few days ago.
Has anyone else experienced this or does anyone have any suggestions on anything else I can try please?
Thanks
Jo

Installation facts not updated, although change documents was created

I updated the installation facts via bapi BAPI_UTILINSTALLATION_CHANFACT. No error message was triggered and the changes were written to the change documents. However, when i try to display the installation and the updated facts, it looks like no changes were made... any advice about what could have gone wrong?

Hello Krish,
We have a business case where in, I need to update the installation facts using BAPI_UTILINSTALLATION_CHANFACT. But our development environment system does not have any installation facts created earlier. So I am trying to create one and change the same using the BAPI.
So I want to know how to create the installation facts using which T-Code and how to use the BAPI for change.
Please Help if you are aware of doing it
Thanks
Suma

Patches List for Installation of Lanaguage for 11i and R12

Kindlly let me know metalink notes ID for Patches List for Installation of Lanaguages for 11i and R12.

Hi,
Please refer to these docs.
Oracle Applications NLS Release Notes, Release 11i (11.5.10.2) [ID 316804.1]
Oracle Applications NLS Release Notes, Release 12.1 [ID 788053.1]
Requesting Translation Synchronization Patches [ID 252422.1]
How To Get The Guidelines To Install or Add the new NLS Language on E-Business Suite 11i or R12 ? [ID 1254325.1]
How to resolve NLS translation issues in an Ebusiness Suite 11i and R12 environment [ID 394112.1]
NLS Frequently Asked Questions [ID 399789.1]
Thanks,
Hussein

My iPhoto app will not complete the installation of an update

My iPhoto app will not complete the installation of an update.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off the router and then power it back on
- Reset network settings: Settings>General>reset>Reset Network Settings. You will have to rejoin all networks

After installing iOS 6.0, YouTube was gone, and can't fine it at app store. The installation of new updates is never succecessful. And there seems to be no way that you can stop it. Why is that?

After installing iOS 6.0, the previously installed YouTube was gone, and couldn't find it at app store. Also, the installation of new updates Can not be completed, they have been in "installing" status for days. And there seems to be no way that I can cancel it. What should I do?

Thanks, I understand that. Now the biggest problem is that I can not purchase or install anything from App Store. They have been in "waiting" mode ever since I tried to install them. What might be the reason?

ERP EHP4 Installation Problem in Update Database registry Phase.

Hi,
We are installing ERP 6.0 EHP4 Ready SR1 on AIX6.1 (6100-03-01-0921) and DB2 v9.1.0.7.
During installation in phase Update Database Registry, we are getting below error:
SQL1042C An unexpected system error occurred
If any body has faced this error earlier, then please suggest.
Thanks
Sunny

Hi,
Please find below the latest entries in db2diag.log:
2009-12-14-20.15.17.555605-330 I25354A304         LEVEL: Event
PID     : 630830               TID : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:260
DATA #1 : String, 43 bytes
System controller termination is completed.
2009-12-14-20.15.17.555785-330 I25659A383         LEVEL: Event
PID     : 630830               TID : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:270
DATA #1 : String, 26 bytes
Active EDUs to be waited :
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCF70 : 0000 0001                                  ....
2009-12-14-20.15.17.565945-330 I26043A381         LEVEL: Event
PID     : 630830               TID : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:280
DATA #1 : String, 24 bytes
There is no active EDUs.
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCF70 : 0000 0000                                  ....
2009-12-14-20.15.17.830570-330 E26425A301         LEVEL: Event
PID     : 630830               TID : 1           PROC : db2stop2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:911
MESSAGE : ADM7514W Database manager has stopped.
STOP    : DB2 DBM
2009-12-14-20.15.24.936396-330 I26727A1630        LEVEL: Event
PID     : 545014               TID : 1           PROC : db2start
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleStartStopSingleNode, probe:1130
DATA #1 : String, 31 bytes
/db2/db2ged/sqllib/adm/db2star2
DATA #2 : Hexdump, 256 bytes
0x0FFFFFFFFFFF9C20 : 2F64 6232 2F64 6232 6765 642F 7371 6C6C    /db2/db2ged/sqll
0x0FFFFFFFFFFF9C30 : 6962 2F61 646D 2F64 6232 7374 6172 3200    ib/adm/db2star2.
0x0FFFFFFFFFFF9C40 : 4E4F 4D53 4700 0000 0000 0000 0000 0000    NOMSG...........
0x0FFFFFFFFFFF9C50 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C60 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C70 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C80 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9C90 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CA0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CB0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CC0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CD0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CE0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9CF0 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9D00 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
0x0FFFFFFFFFFF9D10 : 0000 0000 0000 0000 0000 0000 0000 0000    ................
2009-12-14-20.15.25.077684-330 E28358A856         LEVEL: Warning
PID     : 602312               TID : 1           PROC : db2star2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, license manager, sqllcRequestAccess, probe:1
MESSAGE : ADM12007E There are "89" day(s) left in the evaluation period for
          the product "DB2 Enterprise Server Edition". For evaluation license
          terms and conditions, refer to the IBM License Acceptance and License
          Information document located in the license directory in the
          installation path of this product. If you have licensed this product,
          ensure the license key is properly registered. You can register the
          license via the License Center or db2licm command line utility. The
          license file can be obtained from your licensed product CD.
2009-12-14-20.15.25.174108-330 E29215A384         LEVEL: Warning
PID     : 667782               TID : 1           PROC : db2wdog 0
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, routine_infrastructure, sqlerInitFmpTable, probe:30
DATA #1 : String, 16 bytes
agentCachingFmp:
DATA #2 : String, 3 bytes
OFF
DATA #3 : String, 5 bytes
Flag:
DATA #4 : Boolean, 1 bytes
false
2009-12-14-20.15.26.288917-330 E29600A1208        LEVEL: Event
PID     : 602312               TID : 1           PROC : db2star2
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StartMain, probe:911
MESSAGE : ADM7513W Database manager has started.
START   : DB2 DBM
DATA #1 : Build Level, 152 bytes
Instance "db2ged" uses "64" bits and DB2 code release "SQL09017"
with level identifier "02080107".
Informational tokens are "DB2 v9.1.0.7", "s090308", "U823509", Fix Pack "7".
DATA #2 : System Info, 224 bytes
System: AIX gpldeve1 1 6 00C1EF854C00
CPU: total:8 online:4 Threading degree per core:2
Physical Memory(MB): total:14336 free:10662
Virtual Memory(MB): total:35328 free:31640
Swap     Memory(MB): total:20992 free:20978
Kernel   Params: msgMaxMessageSize:4194304 msgMaxQueueSize:4194304
                 shmMax:68719476736 shmMin:1 shmIDs:131072
                 shmSegments:68719476736 semIDs:131072 semNumPerID:65535
                 semOps:1024 semMaxVal:32767 semAdjustOnExit:16384
Cur data size (bytes) = 0x7FFFFFFFFFFFFFFF
Cur stack size (bytes) = 0x7FFFFFFFFFFFFFFF
Cur core size (bytes) = 0x0000000077359400
nofiles (descriptors) = 0x7FFFFFFFFFFFFFFF
2009-12-14-20.18.03.426764-330 E30809A597         LEVEL: Warning (OS)
PID     : 544840               TID : 1           PROC : db2set
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, oper system services, sqloqcurdir, probe:100
MESSAGE : ZRC=0x840F0001=-2079391743=SQLO_ACCD "Access Denied"
          DIA8701C Access denied for resource "", operating system return code
          was "".
CALLED : OS, -, unspecified_system_function
OSERR   : EACCES (13) "Permission denied"
DATA #1 : File name, 0 bytes
Object not dumped: Address: 0x0FFFFFFFFFFFE688 Size: 0 Reason: Zero-length data
2009-12-14-20.18.03.429260-330 I31407A290         LEVEL: Event
PID     : 544840               TID : 1           PROC : db2set
INSTANCE: db2ged               NODE : 000
FUNCTION: DB2 UDB, oper system services, db2set_main, probe:40
CHANGE : CFG DB2SET: DB2_WORKLOAD: From: "SAP" To: "SAP"
Thanks
Sunny

Manual installation of Windows update to servers

Hi,
We have 90 windows 2008 servers and every month we do a manual patch these servers.
WSUS server pushes the patches to the servers, but we need to login to all servers and manual to do the installation.
How can i automate the update installation on all servers?
Is there any script which can initiate the update on these servers?
Thanks
Venky

Hi 07Venky,
You can setup the WSUS server, then configure the related GPO on the Hyper-V servers then set this server update settings as “Install updates automatically (recommended)”
, then this server will automatically install the updates from your WSUS server.
The related KB:
Configure Automatic Updates by Using Group Policy
http://technet.microsoft.com/en-us/library/cc720539(v=ws.10).aspx
Configure Clients Using Group Policy
http://technet.microsoft.com/en-us/library/cc708574(v=ws.10).aspx
The third party article:
Force Windows to Use WSUS for Updates via GPO
http://www.puryear-it.com/blog/2013/06/10/force-windows-to-use-wsus-for-updates-via-gpo/
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control
these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the
use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can no longer download from some of my 'usual' places, even after the 'update'. WTF?

I've been unable to download ANYTHING from a few of my 'regular' places since I got this %#*@^ 'improved' Firefox. If it wasn't nearly impossible to do, I'd go back to the old one, at least it did ALL the things I use a browser for.
Here's the deal. I go to one of these websites, spy something I need, and try to start a download. Does it happen? NO! Why not? Because said website admonishes me that I already have my limit of downloads in progress! Seems simple enough, you think? Sure, except that I have NO f**king downloads in progress! That never happened with the older Firefox, the one that worked. I've spoken with the webmaster of a couple of the sites involved, and they've made no changes, have no other problems, BUT they advise me that MANY of their users who have this POS 'new' Firefox are having the exact same issue.
I hoped that, once you people issued an 'update' for this spiffy new Firefox4, you'd fix this problem. Surely I'm not the only person cursed with this problem?
Hey, look, if you can't or won't bother to fix this, would you at least have the decency to make it easy to go back to the OLD Firefox that worked reliably?
You can bet I'm making it my business to tell anyone and everyone I can reach that FF4 is a POS, and this is a very good time to find a new browser, like Chrome. Even IE manages to download from the website(s) FF4 no longer d/l's from.
I'd be ashamed, if I was you.
If it matters, mine is a plain vanilla PC, running 64-bit Win7, basic un-tweaked installation. I have the issue noted above whether or not I have any add-on's working. I've made sure to reboot the PC and restart FF4. I've downloaded and installed the alleged 'update', then again rebooted the machine, and still have the same f**king problem, website(s) think I'm already downloading. I never had this problem before I got this spiffy new Firefox4, and if it wasn't such a chore to remove it and go back to a Firefox that WORKED, I would have already done so. Now you've done an 'update', and apparently no one there gives a f**k about this. The websites involved are the same ones I've been d/l'ing from for years, with no problems, and they've made no changes. My PC hasn't been in any way changed, it's entirely the fault of Firefox4. What a POS!

http://kb.mozillazine.org/New_messages_do_not_appear

Getting error while applyin patch after R12 installation

I applying patch 8940108 after R12 installation. Pls. suggest what needs to be done.
Patch 8940108: Optional component(s) missing : [ oracle.precomp.lang, 11.1.0.7.0 ]
Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
The details are:
Patch 7708340:
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms.rman, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
ApplySession failed during prerequisite checks: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
OPatch failed with error code 74

Hi;
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
Its mean if you have patch 8940108 on your system already and if you try to apply patch 7708340 than you dont need to apply patch 7708340,coz patch 8940108 already cover patch 7708340.
You can try this
opatch -lsinventory|grep 8940108
Regard
Helios

Patch In Place installation of JRE8 (update 25)

Similar Messages

Maybe you are looking for