Patch not showing up

Using ZPM for ZCM 10.3.1 -
I'm finding a recent (?) patch that is NOT showing up in the patch area after DAU has run, or in the Patch Management section. The patch is KB982524 - Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Update for Windows Server 2003 and Windows XP x86.
If I let DAU run, it doesn't find this patch. However if I run Windows Update from the PC itself, it finds this patch almost every time.
MS web site indicates the patch was released on 6-21-10 - and yet - it just showed up on my PC with Windows update - and I patch my PC religiously.
Anyone else seeing this?
I'm considering just creating a bundle and pushing it to everyone, but it would be better if it just showed up as a patch available for remediation.
Regards,
Bob

6445856,
I would expect to see it shortly - I have it on my standalone ZPM 6.4
server as of Thursday, so it's only just been released (note that
*security* patches are always released quickly, others may not be).
http://www.novell.com/ProductInfo/pr...uctid=fzvd8r9f
has a link for the supported apps info
Shaun Pond

Similar Messages

Required patches not showing in SCCM report, its all ways showing need 0 patches.

Hi,
Can any only please help me on this issue.
We have a critical server and it is added in SCCM phase for server patching.
But now the issue is, In SCCM maintenace window report, its always showing need 0 patches and its no required patches displayed.
No issue with WMI also, logs shows scan process completed successfully.
If it is the issue with WSUS client agent, can any only please provide me the steps to rebuild WSUS client agent or please suggest me the solution for to fix this issue.
Thanks in advance,
Manivel M

in addition to checking windowsudpate.log (usually found at c:\windows), you should also check the ConfigMgr client logs (usually found at c:\windows\ccm\logs, or, c:\windows\system32\ccm\logs)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Patches not showing up for some devices

i installed the zcm agent on 5 devices at a remote site 2 days ago, and they registered fine with zcm etc, i can remote control them blah blah..however, when i click on the "patches" tab for any of these devices, all i see is "No items available." and i have everything checked off on the right side..anyone seen this or have a fix so i can patch these devices??

geeeerad,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

I can not use the patch command. The icon does not show up on th comand bar.

I can not use the patch command. The icon does not show up on th comand bar

Hello there!
Compared to other versions, in CS6 the patch tool is in a different location:
If this doesn't help you, what version of Photoshop are you using?
Please post back with any other questions,
Janelle

SkyDrive photos & contact list not showing in FF13

I have had FF for years & have been happy with it always until FF13 which has caused problems with my use of SkyDrive to share my photos. I have used SkyDrive for a long time too & never had issues until the recent FF13 update. I can use SKYDrive without any problems if I use IE as my browser but in FF13 some photos will not show in a slideshow unless you right-click & choose view original then a separate window opens for that one photo. It is random because if you start slideshow over it may be totally different photo(s) that will not show. Other thing that started since FF updated to 13 is that when I try to 'share' the slideshow my hotmail contacts list will no longer load although it will load if I switch to IE. This is clearly a problem related to FF13 since there is no problem in IE. I prefer to use FF but need it to work for SkyDrive. Please is there a patch for this or can you tell me what to do.

This is way too technical for me. I have no idea what that is nor do I feel comfortable fiddling with things I don't know anything about.
Thanks for your help but as I said in my last post I will use IE for sharing SkyDrive until the FF fix comes out.

Ical not showing all day events in lion osx

ical does not show all day events

Hi,
I noticed that the issue only happens to specific user with specific computer. Please do the following checking to narrow down the issue:
1. please update the Outlook client with the latest patches and service packs.
2. disable using Exchange cached mode and check whether the issue happens in Online mode in this computer.
3. Start
Outlook in safe mode to have a try.
4. Perform a clean boot
in your Windows for the new machine.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Desktop icons not showing up for T60's and T61's

We are having an issue with nearly half (we have a few hundred at out company) of our T60’s and T61’s where they do not show the desktop icons at boot up. If they start the task manager and run explorer then everything pops up like normal. But they will have to repeat this process every time they boot up. We also tried having them turn off the wireless radio via the slider switch but that did not help.
One fix we found was to go C:\Documents and Settings\Administrator\Local Settings\Application Data and copy the IconCache.db found there over the users IconCache. This fixes the issue for 99% of the people who have this problem, but there are a few that continue to boot up to no desktop items.
The only other fix we have found was to put explorer.exe in the start up folder. This brings up a pop up of their My Documents at start up that they have to close but is much easier than going through the task manager to run explorer.
We also have many T43’s and many Lenovo desktops from M-81, M-82, and M-88’s. none of the desktops show this problem and we have not had this issue with any of the 43’s.
The software packages are essentially the same for all of our systems. The only difference being is that the desktops do not have VPN.
Windows XP sp2
MS Office 2003 standard
IE 6
Adobe Reader 8.1
Lotus Notes 8.1
Sametime 8.0
Cisco VPN 4.6
RealVNC 4
Symantec Antivirus 10.1.5
We run all MS updates and keep the laptops fully patched with Lenovo updates, the only updates we do not use is the ThinkVantage access connections. We install all other system updates in the critical and recommended section.
Some basic hard ware specs of the systems involved:
T61
Processor:        Intel Centrino Core Duo T8100 2.1GHz
Display:            NVIDIA Quadro NVS 140M
RAM:               3GB
Disk Drive:       WDC WD1200BEVS
BIOS:              LENOVO 7LETB2WW (2.12), 2/20/2008
T60
Processor:        Intel Centrino Core Duo T2500 2.0GHz
Display:            ATI Mobility Radeon X1400
RAM:               2GB
Disk Drive:       ST9120822AS
BIOS:              LENOVO 79ETE1WW (2.21), 2/5/2008
T43
Processor:        Intel Pentium M 1.86GHz
Display:            ATI Mobility Radeon X300
RAM:               1GB
Disk Drive:       HTS541080G9AT00
BIOS:              IBM 1YET62WW (1.27), 5/18/2006
M88
Processor:        Intel Pentium D 3.0Mh
Display:            Intel Q965/Q963 Express Chipset
RAM:               1GB
Disk Drive:       WDC WD800JD
BIOS:              LENOVO 2JKT37AUS, 7/12/2007

Good news: I found a solution. Kind of bad news: it's an extremely awkward behaviour –*but at least it works.
Start iTunes, remove all your voice memos from your library (back them up if you need them), quit iTunes. Restart Finder. Done. I hope that helps!

Today Plus theme not showing all-day events

I am using a Today Plus theme I have downloaded off of bplay and love it. I use google calendar and sync without problems.
My only issue is that I have many (MANY) all-day events in my google calendar that don't appear on the main page unless I specifically highlight the calendar icon to show my agenda, monthly view, etc.
These are everything from birthdays, holidays, what color uniform my kids are to wear that day......important things that I have spent a lot of time putting in my google calendar only to NOT show up!
I may not be wording everything correctly here as this is my first forum post, but hopefully you can get the basic point and please try to help me out!
Many thanks
~T~

Hi,
I noticed that the issue only happens to specific user with specific computer. Please do the following checking to narrow down the issue:
1. please update the Outlook client with the latest patches and service packs.
2. disable using Exchange cached mode and check whether the issue happens in Online mode in this computer.
3. Start
Outlook in safe mode to have a try.
4. Perform a clean boot
in your Windows for the new machine.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

New exchange emails not showing up in IOS6

Ok'
I have been using IOS on iPad and Iphone against an Exchange2003 server for some time without problems.
Upgraded to IOS6 on both devices a month or so ago and had endless issues with battery problems (on the phione)
Found work arounds for those but over last few days have run into issues with email messages. Probably been going on for the last three days, although not entirely sure...
Right now email on the idevice does not download new messages from the server....until that message is opened by another client.
ie although new messages are being delivered to the mailbox they do NOT show in the idevice mail ...unless I log in using Outlook or OWA and open the message....as soon as message become 'read' they then appear a few seconds later in the idevice......
ive tried all different settings on the idevice, push, fetch, different time schedules all to no avail.
A week or so ago new messages were showing up as they appeared....now not.
I have deleted and reinstalled the mail account on thge iPad - no change.
What on earth is going on? Is anyone else seeing this?
why is imail no longer seeing 'unread' mail?
Al.

Ok
May have solved it. Was looking through my past posts and realised I had a similar though not identical problem last year. I fixed it by adding a registry setting to the MSExchangeIS service on the exchange2003 server:
Inconsistent Sync::
If you are getting inconsistent Synchronisation from your device to your Exchange 2003 server, please add the following registry key to the server:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\VirusScan
ProactiveScanning REG_DWORD 1
Just checked the settings on that server and the value was set as 0, despite me setting it as 1 last year. So it's has obviously got changed back....by an AV update, by a Microsoft patch? Who knows? Anyway I made the change again to enable proactive AV (ie set the value as 1) then restarted the Information Store service.
Mail sync to the idevices now seems to be working, with messages showing up when they should. Why does this work?
Dunno....but it might help someone else have problems with unrealisable sync against exchange2003 servers.

IDM 8.1 with firefox does not show all GUI items

Hi,
we are running IDM 8.1 Patch_5 on Solaris 10. We have 2 instances, Prod & UAT. UAT runs from Tomcat 5, Prod uses Sun Appserver 8.
But our problem seems to be the Web Client.
When We lookup a user and then open the tabs for them, for example "Security" Firefox is not showing the
little boxes that allow you to allocate attributes etc. Instead, we just get the form title and then a blank line.
I did some reading and noted that there were some Java issues with IDM and Java and Firefox but I cannot apply
the workaround. I also tried the edit of Waveset.properties and adjusting the baseHref as suggested elsewhere but this
also does not work.
We are using Firefox Mozilla/5.0 (X11; U; SunOS sun4u; en-US; rv:1.9.2.6) Gecko/20100627 Firefox/3.6.6
As you can see this is a SPARC desktop!
Also Java was tried with v1.5_16 and now currently jdk1.6.0_07.
Can anyone please assist? This is rather urgent. I will be trying my Mac at home tonight, but we need something
that works now! Interestingly, this is the first time I have seen this problem. It may be related to Firefox, but I tried using Opera as well
with the same result.
Please assist!

Hi,
thanks for the information. I doubt we will be modifying the base code of IDM in this way. I am a bit disappointed that a
Sun product, running on a Sun desktop has this issue, but I think it more of a synergy between Java and Firefox, although
Opera was basically broken the same way, too.
Our workaround for now, is to have a separate install of Firefox, which is 3.0.3 and Java 1.5.0_16, which we know work
and run this as a parallel browser, with a symlink to it as "firefox-idm". This is OK, but not really that good.
Interestingly, IDM 8.1 displays perfectly on Snow Leopard and G5 Leopard using Firefox 3.6.6 and Java 1.6 on
Snow Leopard and with Java 1.5 on the G5 release.
We are thinking of apply IDM patches, but are reticent to do so, if they break any existing functionality......
Cheers
rachel
Edited by: virag064 on Aug 19, 2010 6:04 PM

SPM 5.2 - problem with reason/activity fields - not showing in the report

Dear experts,
I have a situation that is hard to describe.
We have SPM 5.2 - all set and working, now the problem is that for some of the FF sessions the tool is either not reporting the reason/activity fields (due to some technical problem that is occuring randomly) or the users have found a way to abuse the fields and make thier way around them. (these fields are very important for our SOX controls)
I have created test users to see how they are entering without filling the reason/activity fields, but no luck - i couldnt enter.
As you know the Activity field is mandatory text field and at least one character must be entered, but I don`t think this is the workaround, because even if you put space the report still will show it. I have examples where the report is not showing anything.
The worst is that I can`t simulate such cases.
Have you ever heard of such nosense?
Thank you,
Iliya

I think I found it - Application deficiency. It is the language that you are logged with. If it is not English the application is not recording the text that you type in the reason/activity fields upon FF session.
I hope the latest patches are fixing this!
BR
Iliya

Extract panel does not show in Dreamweaver CC 2014 - using Mac - Why?

It is odd - as I used the Extract workspace, the Extract panel does not show - not even if I try opening it via Window -> Extract.
I have updated my Dreamweaver 2014 to the most recent version.
Can anyone help me?

Good to know that your issue has been resolved.
To further investigate why that issue happened we would need some more information from you.
Please tell us more about the settings of DW before applying patch
> Which workspace you were working before applying the patch ?
> What all panels were ON before applying the patch ?
> Did you perform any specific steps before applying the patch ?
> What is the version of your Mac ?
> Any extensions of DW installed?
Thanks,
Lalita

Print preview not showing values correctly. (single words are omitted)

Hi,
When viewing print preview of ME23n , it does not shows the values correctly.
It omitting the single words.
If its having 2 or more words, it displaying correctly
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
Any ideas how to resolve this issue?
Is there any thing to do with printer settings & configurations / netweaver admin point of view?
Best Regards.
Zerandib

Hi Zerandib,
By the way , since its a standard program, i think that code is out of our scope.
Me23N is a standard tcode but cusomters create Z-Program for printing by making a copy of standard.
You may please check upon the same.
Is it possible to check the results on a system where patch has not been applied ?
Regards,
Deepak Kori

Audio is not showing up in the browser nor the timeline???

i have a question. i recorded a video and viewed it and the video and audio is working. when i imported it and it showed up on the browser the audio outputs were not showing up. also when i tried to dragged it to the timeline the audio tracks didnt show up either. what could this be?? i have a sony dvcam hdv deck in which someone used it and im thinking maybe they changed some settings on the deck?? help please!!??

The VU meter is the audio meter (see FCE 4 user manual from page 56). If a clip include any audio, this meter should move when clip is played from browser to viewer.
The camera audio should be 16 bit 48 kHz. You can use 32 kHz if you select the correct preset in Easy setup dialog box.
Did you see the link provided earlier for patch panel bay use?
The patch panel switch is the way to tell to FCE where (understand on exact layer) adding video and audio in timeline. If the audio switches are disconnected, the edit will insert only video. There is a contextual menu to reset the patch panel switch.
Michel Boissonneault

Outlook 2010 contacts not showing phone number in Lync 2013 client

Hi,
We have Lync 2013 with Exchange 2010. Recently we started upgrading Lync clients from 2010 to 2013.
A few users started reporting that their local Outlook contacts does not show phone numbers in Lync 2013 (working with 2010)
I have installed the august patch which should solve this issue
981751 - Lync 2013 does not display telephone number of an Outlook 2010 contact in the contact card
Any idea where to look next?

Hi Tobias Borgen Nielsen,
Lync expects all the phone numbers to be in the E.164 format, meaning they should be +1-111-11111111 etc. If they’re not like this, you will have to normalize them if you want Lync
to publish them.
The related article for your reference.
Lync not populating contact cards phone numbers from Active Directory (Or: How to normalize AD phone numbers for Lync Server 2010 and 2013)
http://y0av.me/2012/02/23/normalize_ad_numbers/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or
suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope it can be helpful.
Best regards,
Eric

Patch not showing up

Similar Messages

Maybe you are looking for