Pause, Stop and Resume buttons

Hi Everyone,
I've got a fairly short little animation sequence that the folks here at my work would like to insert into one of our web pages on our site.  It's a demo on how to use one of our products, so I'd like to add a few buttons so the user can pause and then resume the entire movie.  There is absolutely no scripting applied to the FLA right now.
Could someone please get me started with this?  I've been working on another project that involves scripting some buttons with AS3, so I have some knowledge, but am still having a lot of difficulty, so any help would be appreciated.
Thanks.

To stop/pause a movie you command it to : stop();
To play/start a movie you command it to: play();
That's really all you need to have your buttons do in their event handler functions.

Similar Messages

  • HT202159 Mountain Lion upgrade download stopped, now it states in purchased apps that 'an error has occured' and resume button is blank & will not work

    Mountain Lion upgrade download stopped, now it states in purchased apps that 'an error has occured' and resume button is blank & will not work. Tried to re download, but it states code has already been used

    Danielle...
    From the App Store menu bar top of your screen click Store > Check for Unfinished Downloads
    If that doesn't help, disable anti virus software and turn off the Firewall in System Preferences > Security & Privacy.
    Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband (high speed internet) access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

  • My refresh button will not appear in 4.0, all I can get is a stop and home button, the refresh shows up in customize toolbar and I can put it up there, but as soon as I close it it dissapears, how do I get my beloved refresh button to show up?

    At first I had the stop/refresh buttons merged, which I hated so I tried putting spaces and things between them to stop their unholy union, but instead it has now made my refresh button dissapear in anger for not being allowed to see that dirty stop button! I cannot make it come back! Even if I put it on the toolbar in customize and it shows up, the moment I close it it has gone again.

    Firefox 4 uses a combined Stop/Reload/Go button that is positioned at the right end of the location bar.<br />
    During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button.<br />
    If you type in the location bar then that button becomes a Go button.<br />
    You can middle-click that Reload button to duplicate the current tab to a new tab.
    To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
    * Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
    * Drag the Reload and Stop buttons to their previous position to the left of the location bar.
    * Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
    * Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.
    See also:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Stop and Resume client deletion

    Hi all,
    I have a strange requirement here, I am planning to execute client deletion using parallel processing.  I will be executing the deletion during weekends Saturday & Sunday. In case, if the deletion still continue on Monday morining, I want to cancel the deletion ( Logically STOP) and resume in next weekend..
    Since, client deletion will resume from the point where it stopped, i would like to know the standard procedure of cancelling the deletion job. Does SCC5 or SCC3 provides any option to STOP the active jobs? If not, which is the correct way to stop the active deletion process?
    Please share your experience & thoughts on this line.
    regards,
    VInodh.

    Hi Vinodh,
    Set a background job for client deletion using transaction SCC5 and stop the active job when you want to....using SM37>Job>Cancel active job ....At this time the client is almost completely deleted. If you need to, you can restart the deletion. Because the users must have been deleted at this point, log on as user SAP* and use the initial password PASS and continue with client deletion.
    Award points accordingly,
    Regards,
    Raju.

  • Stop and play buttons...

    How would I go about adding stop and play buttons to a slideshow?
    stop1.addEventListener(MouseEvent.CLICK, stop1);
    play1.addEventListener(MouseEvent.CLICK, play1);
    function stop1(event:MouseEvent){
    if(this.currentFrame == 1)
    { gotoAndStop(this.totalFrames);
    function play1(event:MouseEvent){
    if(this.currentFrame == 1)
    { gotoAndStop(this.totalFrames);

    well idk if the code is even right i need help?  The way the slide show is working is i have it on the timeline....  With this code it doesnt play automatically and when i push play it goes through them in like 2 seconds and you can't see anything?
    stop1.addEventListener(MouseEvent.CLICK, stopSlide);
    play1.addEventListener(MouseEvent.CLICK, playSlide);
    function stopSlide(event:MouseEvent):void {
    stop();
    function playSlide(event:MouseEvent):void {
    play();

  • Stop and reload buttons

    When are we going to get stop and reload buttons in Safari?

    Hi,
    The reload / refresh button is in the Safari address bar already on the right.
    I see that going back as far as Safari 4.1.3 that is.
    Carolyn

  • Stop and refresh buttons

    Stop and refresh buttons (one will disappear while the other is active). I have found numerous websites that just don't want to load on the first try, now I am unable to refresh it (usually in a new tab) because the button disappears. BTW 255 limit is BS.

    You can try to press the ESC key to stop loading the page if you see the Stop button instead of the Reload button. You can also reload the page via F5 or Ctrl + F5 (cache bypass).
    Firefox 4.0 has a combined Reload and Stop and Go button that appears at the right end of the location bar.
    To restore the Firefox 3 appearance you can use these steps:
    * Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
    * Move the Reload and Stop buttons to their previous position at the left side of the location bar.
    * Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
    * Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

  • Stop and refresh buttons (one will disappear while the other is active). I have found numerous websites that just don't want to load on the first try, now I am unable to refresh it (usually in a new tab) because the button disappears. BTW 255 limit is BS.

    Stop and refresh buttons (one will disappear while the other is active). I have found numerous websites that just don't want to load on the first try, now I am unable to refresh it (usually in a new tab) because the button disappears. BTW 255 limit is BS.

    You can try to press the ESC key to stop loading the page if you see the Stop button instead of the Reload button. You can also reload the page via F5 or Ctrl + F5 (cache bypass).
    Firefox 4.0 has a combined Reload and Stop and Go button that appears at the right end of the location bar.
    To restore the Firefox 3 appearance you can use these steps:
    * Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
    * Move the Reload and Stop buttons to their previous position at the left side of the location bar.
    * Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
    * Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

  • HT202159 mountain lion download interrupted and resume button not working

    mountain lion download interrupted and resume button not working

    From the App Store menu bar top of your screen, click Store > Check for Unfinished Downloads
    Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.
    You may need to temporarily disable anti virus software to download apps from the App Store including Mountain Lion.
    Make sure your Mac qualifies to run Mountain Lion >  Apple - Upgrade your Mac to OS X Mountain Lion.

  • IMAC PAUSES, Stops and Goes HELP!!!

    Hello,
    I bought my computer in November. It is a 24" Imac. I have a pausing problem myself. It got so bad I brought the computer back to Apple and they reload Leopard for me from the beginning. Again, my computer is pausing when I do everything. It's getting so bad that my wife has noticed it and now asking me why I went from Windows to Apple. (OUCH) Plus, she knows nothing about computers. I need help quick. Any one out there with any answers would help. I am sick of things stopping and going with everything I do.
    Thanks
    Scott

    silentpartner,
    Unless your issues match a known problem, (wouldn't appear too likely if no result from the Apple Hardware Test) before Apple will accept your iMac for hardware repairs, you'll have to prove it's not a software issue by reinstalling the OS. FWIW, if it's a hardware issue and in particular if the hard drive needs replacing, you'll want to back up your important data anyway, prior to turning it in for any repair.

  • Start Stop and Run button.

    hello,
    I have one question, I want one button which can be run/start/stop button. I can't compile the program with "Run when open", because I need the user enter a string and a configuration, however after the user enter a configuration, I want that a START button, and when the user want press the same button to STOP all the program. All without pressing the "Run button (white arrow)". So the sequence it will be:
    1- open the ".exe"
    2- configure the variables such as: file name, file path, comments.....
    3- press START button, and the system will start acquisition.
    4- press STOP button and the program stopped and save all the data in a file.
    It is that possible? Could anyone help me with it? Or send me and example?
    Best regards,
    Anna.  

    Hi,
    You can do something like this.
    Compile it with "Run when open".
    Best regards
    Matej
    CLAD using LV 8.2, 2010 and 2012
    R&D Laboratories
    Domel d.o.o.
    www.domel.com
    Attachments:
    StartStopAndRun.vi ‏13 KB

  • Officejet Pro 8000 Wireless Has Both Power and Resume Buttons Blinking

    Using Vista operating system with my Officejet Pro 8000 Wireless.  The Power button and the Resume button are blinking at the same time.  I went through HP's recommended fixes step by step and it still has the same problem.  I've done all the resets, etc., etc. and I searched High and Low for a paper jam which these two blinking lights apparently indicate but could not locate even a tiny little piece of paper jammed.
    Any help is appreciated and by the way, this printer has not been used a ton.  Simple average use and well below the monthly use rating.
    Thanks,  Rick

    I also have been having this exact same problem for over two years now but never found a solution. I  think I have only printed out about 50 pages since I purchased the printer new in 2010 and at one point it just started doing this.  I can reset the printer by unplugging it and it will work temporarily; sometimes long enough to print out 2 or 3 pages but always goes back to the same faulting state within minutes. This happen whether or not it's connected to a network, USB, or nothing at all.  I also have the newest firmware and purchasing new ink cartridges about 15 months ago never fixed it. (They are nearly empty now and I don't think I have printed more than about 15 pages!)  Does anyone from HP know why the printer keeps faulting like this? I print so seldom that it's a shame for me to have to have to buy a new printer just so that I can print out the odd few pages every few months, and this one was expensive back when I purchased it and it's practically useless when it keeps faulting like this.

  • Missing, stop and refresh buttons.

    What happened to the refresh and stop buttons?
    Thanks in advance
    Ray.....
    ff 4.0 b 11

    See:
    *http://support.mozilla.com/en-US/questions/765875
    *http://mozillalinks.org/wp/2010/09/unified-stop-reload-go-button-comes-to-firefox-4/

  • Is there any way to stop and resume update from where it was pause in iTunes?, is there any way to stop and resume update from where is was pause in itunes?

    Every time when I pause update process in iTune
    and when I try to resume update process, it start from begining.
    is there any way to re-start downloading update from where it was left in itune?

    No, it will start over, and you should try to never pause an update, let it finish if at all possible.

  • How to stop and resume the animations of nested movieclips

    Hi
    I have many nested movieclips  in different positions of the main timeline.
    I have 2 buttons, play_btn and pause_btn.
    I'd like when the user click pause_btn, the animations on the main timeline and in nested movieclips stop.
    Whe he click play_btn the animations resume in both the main timeline and nested movieclips.
    I have created array of nested movieclips on the main timeline.
    var arr:Array = new Array(mc1, mc2, mc3, mc4, mc5);
    play_btn.addEventListener(MouseEvent.CLICK, on_play_btn);
    pause_btn.addEventListener(MouseEvent.CLICK, on_pause_btn);
    function on_play_btn(e:MouseEvent):void
         gotoAndPlay(currentFrame);
         for(var i:Number = 0; i < arr.length; i++)
             if(arr[i] != null)
                 arr[i].play();
    function on_pause_btn(e:MouseEvent):void
         gotoAndStop(currentFrame);
         for(var k:Number = 0; k < arr.length; k++)
             if(arr[k] != null)
                 arr[k].stop();
    but it only stops the animations on the main timeline and dosen't stop the animations in the nested movieclips.
    Help me Please.

    I'm having the same issue.I have a main timeline, which has nested movieclips with there own timelines and motion tweens. Using the new motion tween, and not the classic tween, which may or may not be the problem.
    Was having a similar issue with stopping the timeline, the main timeline would stop, but the nested movieclips would keep going. Found this blog post that helped.
    http://blog.nobien.net/2009/02/05/as3-stopping-all-timeline-animations/
    Used the code below to stop everything by passing the stage as the displayObject. Worked great, but now i'm having the reverse issue. When I resume play, the nested movieclip timeline stays exactly where I stopped it, and the main timeline resumes play. If there are a 100 frames in the nested movieclip, once it reaches the 101st frame, the main timeline kicks in again.
    function stopAllChildMovieClips(displayObject:DisplayObjectContainer):void{
            var numChildren:int = displayObject.numChildren;
            for (var i:int = 0; i < numChildren; i++) {
                var child:DisplayObject = displayObject.getChildAt(i);
                if (child is DisplayObjectContainer) {
                    if (child is MovieClip) {
                        MovieClip(child).stop();
                        stopAllChildMovieClips(DisplayObjectContainer(child));

Maybe you are looking for