Pausing status symbol when Articulate courses are uploaded to Adobe connect

I created PPT in Articulate utilizing Engage and 3rd party audio files.  I loaded them into Adobe connect as a curriculum.   Everything looks good.  However, after I take each course, some of the courses have a 'pause" symbol instead of a "green check mark."  Because the system will not recognize the completion of the coures, students cannot continue to the next course on curriculum that has pre-requisites.  Has anyone experienced this or help?
thanks,
Kelly

Not sure. It sounds like you need to contact Articulate and see what they advise. I cannot advise since that is a competitor to our Adobe Captivate/Presenter.

Similar Messages

  • Cannot resolve symbol when the classes are in the same package

    i have one interface and two classes all in the same package. am getting " cannot resolve symbol", when the code refers to the interface or the class .
    the package name is collections.impl and
    the directory i used to store all the java files:
    c:\jdk\bin\collections\impl.
    isthere any othe option other than compiling all the files from the comand line at the same time?
    please help - i m new to java.

    If you have:
    I.java:
    package some;
    public interface I {
        void method();
    }A.java:
    package some;
    public class A implements I {
        public void method() {
            new B();
    }B.java:
    package some;
    public class B implements I {
        public void method() {
            new A();
    }in c:/temp/some for example
    you can compile your files with
    javac c:/temp/some/*.java
    It seems that you have errors in your code.
    Recheck it twice or use NetBeans IDE(http://www.netbeans.org) it will do this for you ;)

  • 413 header length too large when applying for free trial on adobe connect

    Hello
    .I am trying to apply for a 30 days free trial on adobe connect, however when I submit my application this error occurs.
    What should I do? I have Windows 8/ google chrome.
    Please keep the answers short since I have a bit hard to to understnd difficult meanings.

    Hi,
    This is Adobe ColdFusion forums, you have to ask this question in Adobe Connect forums. link mentioned below.
    https://forums.adobe.com/community/adobeconnect
    Thanks,
    Priyank

  • I am a student at FIU and i can't access my course work when I try to log into Adobe Connect it says that I don't have permission

    Is there something that i have to download or install for this program?

    larkkey,
    You should reach out to the admin of FIU's Connect deployment. Your professor, who may be incharge of enrolling you in the appropriate training, may also be able to verify your permissions and get you access to your training.
    There shouldn't be anything special to install to access your trainings.

  • Adobe Connect pro 7.0 license upload

    Hello,
    I want to use Adobe conenct pro.
    When I installing the software I have entered serial key(<<removed by moderator>>), afterwards
    when I want to upload the license file has the following
    error
    (No message for validation error "format", type "id", field "field-id" )I added this error screen
    Edited by: Rob Burbank on Apr 25, 2011 1:11 PM

    Hello ikarayaka,
    I am running into the exactly same issue while uploading the Adobe Connect Enterprise Server (600) license. It would be great if you could share your experience and let us know what steps are required to have this issue resolved. I have already open a OSS message with SAP.
    Regards,
    - Furqan Illahi

  • Why I can`t upload an adobe file on creative cloud?

    I upload a PDF file without problem, but when I try to upload a adobe file like .ai or .indd I can´t do it. I don´t know why or what is the problem.

    Camila,
    What exactly happens when you try to upload .ai & .indd files? Do you get any error message?
    I tried the uploading both .ai & .indd files fom my Google Chrome browser and was able to successfully upload it.
    Could you reboot the machine and retry?
    Also, try the same using an alternate broweser and check.
    Which operating system are you on anywany?

  • Video playback issue for Adobe Presenter 9 when publishing to Adobe Connect Pro 7

    Hello!
    I am having an issue with video playback for Adobe Presenter 9. When I preview the presentation on my computer there are no issues with any of the MP4 videos that I have loaded into my presentations. However, when I publish the presentation to Adobe Connect and access the URL the videos are either delayed or do not appear at all.  We are using our own Adobe server which we purchased in 2008, along with Adobe Connect Pro 7. We recently updated our Adobe Presenter software to version 9. Is there an incompatibility issue between Adobe Presenter 9 and our current Adobe Server/current version of Adobe Connect? Or do I need to do something different in Adobe Presenter when importing the videos?  Note: I have tried FLV videos and had the same issue.
    We are trying to launch of series of webinars (each webinar has between 15-42 slides), which was the whole purpose of updating our Adobe Presenter and Adobe Captivate software....hopefully we can resolve this video issue.
    Thanks!
    Dana

    Connect 7 didn't support MP4 video content, as I recall. Another issue is that Connect rooms are using Action Script 2 (AS2) while Presenter 9 uses AS3, and the two code languages don't play well together. You don't mention if you are using the meeting application to display the presentation, but it is worth mentioning. If the presentations are stand alone, then the AS3 issue should be non-existent, but the MP4 support may be.
    Is there a reason you haven't updated the Connect software to Connect 9 (or at least Connect 8.1 where the Connect application became AS3 as a whole and supported MP4 content)?

  • Adobe Connect gets hanged when enabling/disabling audio

    Hi everyone!
    My name is Dani and I'm from Spain.
    We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
    I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
    We are using the adobe connect add-in in a computer with that configuration:
    - Dell Optiplex 760
    - Windows 7 x64
    - 8 GB RAM
    - Microsoft LifeCam HD
    - ATI radeon graphic card (256MB)
    - A DSL dedicated simetric line
    Your help would be appreciated!!
    Thanks in advance!!

    Hi everyone!
    My name is Dani and I'm from Spain.
    We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
    I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
    We are using the adobe connect add-in in a computer with that configuration:
    - Dell Optiplex 760
    - Windows 7 x64
    - 8 GB RAM
    - Microsoft LifeCam HD
    - ATI radeon graphic card (256MB)
    - A DSL dedicated simetric line
    Your help would be appreciated!!
    Thanks in advance!!

  • Trying to print a book with Aperture 2.1.4, everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window.

    everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?

    everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?

  • Articulate Storyline courses in Adobe Connect Pro 7.5 don't resume when learner closes and revisits

    Hello,
    I'm brand new to this forum, so please forgive any breaches of etiquette, but I really hope someone from the Community can help wth a strange, somewhat random issue with some Articulate Storyline courses hosted in Adobe Connect Pro 7.5.
    We have more than 20 Storyline courses that have been published and uploaded over the last year.  If a learner closes the course before completing the end-of-course quiz, their progress should be saved and when they reopen the course they should see a prompt asking if they want to resume where they left off (see below).  This functionality is set up within the player settings of Storyline before the course is published, and all courses were prompting to resume until a couple of weeks ago.
    Resume Prompt:
    Storyline Player Settings:
    Around May 31, we noticed that some of the courses were starting over from the beginning slide, even if the learner had previously completed part or all of the course.  I opened about 10 courses that day, and 3 or 4 prompted me correctly; the other 6 or 7 started over at the beginning.  The strange thing is that all of the courses are published the same way using the following settings in Storyline (3 screens below).
    Publish Settings Screen 1
    Publish Settings Screen 2
    Publish Settings Screen 3
    The even stranger thing is that a course that didn't resume properly last week, now resumes correctly for my coworker but doesn't prompt me upon revisitng/resuming the course.  On Monday I opened 12 courses and only 2 of them resumed correctly.  Today I checked those same 12 courses:  5 prompted to resume correctly (including the 2 that worked on Monday), 7 did not prompt me.  When my coworker opened the same 12 courses - 2 of the 7 that weren't working for me DID prompt her when she reopened the course link.
    Unfortunately I haven't been able to establish any patterns as to why some courses always prompt to resume, why some courses never prompt /always restart from the beginning and why some courses prompt when my coworker opens them but not when I do.
    At this point, I'm not even sure where to start, what to check or what questions to ask, so any and all help or suggestions are GREATLY appreciated.
    Diana

    To uninstall the add-in, go to your Start Menu, then Control Panel. Find Add/Remove Programs or Uninstall or change a program. Sort the list by name, and you should see the Adobe Connect Add-In. Select it and then click Uninstall.
    I believe there was an issue with Flash Player 11.2 or 11.3 that caused the version notification to show in Connect incorrectly. If the uninstaller doesn't work, then it may need to be solved by Adobe. You can also uninstall Flash Player from the dialog shown above, though the application in the KB article is a more complete uninstaller.
    The Connect 8 add-in is backward compatible, though the Connect 9 add-in is not, so be sure you don't have that. As you can see in the screen shot above, I have both add-ins installed.
    Have you gone to the Test My Computer page for your Connect server? There is also the option to install the add-in there, and get feed back on what may be causing these issues? You can access that from your Getting Started page, found on the Home Page of Connect Central, Resources tab.
    Or you should be able to insert your server URL in this link, http://YourServerURL/common/help/en/support/meeting_test.htm for the test page.

  • I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

    I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

  • CAD VIEW Error : "Status can only be set when all originals are stored"

    Hi Friends,
    I have Proe to SAP integrated and when I open Proe model in CAD VIEW and try to create a document it shows an error "Status can only be set when all originals are stored" Also I see that the model is not having Status in CAD VIEW.
    When I double click on that object in CAD VIEW, it takes me to DIR creation screen with Document Type DES. Can someone help me in this  ?
    Rgds,
    SM

    Hello Sudharshan,
    "Status can only be set when all originals are stored" Also I see that the model is not having Status in CAD VIEW.
    This is error is indicating that your original CAD model is not checked in and as per your configuration you require the original to be checked in before moving to next status.
    Please:
    1. Check your document status network.
    2. ensure that you have proper set up for the fields "check in" in the current status. This indicator should be set. This ensures that the document is automatically checked in before moving to the next status. This will solve your problem.
    When I double click on that object in CAD VIEW, it takes me to DIR creation screen with Document Type DES. Can someone help me in this ?
    Because of the above set up missing the original DIR is missing the original document and hence the system assumes you are creating a new DIR when you click on the object in CAD view.
    regards,
    N K

  • Message no. 26269 : Status can only be set when all originals are stored

    Hi,
    While changing status in cv02n, i am getting the below message no-Message no. 26269 : Status can only be set when all originals are stored. I am not getting the message solution in google. please guide me how to come over from this message.
    Regards,
    Mastan.

    Collegues! Have you any idea?
    Found this - [recommendation|http://help.sap.com/saphelp_47x200/helpdata/en/0c/b98e3c90347b17e10000000a114084/content.htm] - how to, but there so simple scenario without details about standart functionality.
    Check In
    You can check in originals, which are saved in the local network, into a storage system. The following originals are indicated by the  icon:
    Originals that are to be checked in for the first time.
    Originals that have already been checked in, and loaded into the local network for changing.
    To do this start WebDocuments. Process the document info record in the change mode.
    Select the original in the Originals dataset.
    Choose Check In. The system determines the storage system based on the system settings, and checks in the original.
    You return to the data sheet. The original application file is indicated by the Checked In  icon.
    Save the document.
    Very simple, but not work, and no details. Castle icon are not locked. DELETE, CANCEL - work, but not CNANGE.
    Maybe my storage system cannot determine the storage system? If it is right, so where can i maintain this option?

  • More than 50 MB sized applications are grayed out with status of "Waiting/Installing", when we update those apps from WiFi Connection?

    Hi,
    Few application updates are available in iOS App store. However, Those applications are grayed out with status of "Waiting/Installing", when we update those apps from WiFi Connection. It's happening only for more than 50 MB sized applications. Unable to install those application through WiFi, However, it's successfully installed through MacBook Pro iTunes application. Please suggest me, why this happening suddenly.
    Thanks in Advance,
    Suresh Balakrishnan.

    - If I make the deployment required, it will install right away regarless of maintenance windows.  However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software. 
    Re-check your deployment, specially the user experience:
    If you've checked the box next to "Software installation", it will install after the deadline has passed and ignores maintenance windows. Change the deployment to required and uncheck that box and the software should be installed according to your
    maintenance windows.

  • 3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions

Maybe you are looking for