Pavillion p2-1122 - Unable to reinstall Win7 64bit

My boot sector is corrupt and I attempted to do a clean install from CD.
The installation process displays the Windows7 startup window. Then a blue screen with the message "Setup is starting". I then get a screen with a language select menu.After selecting "English" and clicking on next I get the screen with the license terms. Clicking next after accepting the terms brings up a screen that reads "Select the driver to be installed". This window shows no drivers. I scanned the cd for drivers but no acceptable drivers are found. How do I get past this step?
Thank you,
Klaus [edited personally identifiable information]

CaseyC0815,
Thank you for participating in the HP Support Forum.
To protect HP Support Forum participants, our terms of use policy stipulates that you not publicly share your personal information, including but not limited to full names, email addresses and product serial numbers. Although it is also recommended that you not share this information privately, if you wish to exchange information with a specific community member, you might consider doing so in a Private Message (PM). Please refer to "How to Check Your Private Messages" for information on how to use this function.
Respectfully,
eric-g
I no longer work for HP.

Similar Messages

  • HP Pavilion g4, reinstall Win7 64bit fm a DVD disc, not work

    I try to fix a problem for my friend's laptop. It is HP Pavilion G4
    running Win 7 64bit OS. The laptop can not start up the windows. I
    press ESC to pause the start up, and run system recovery, it shows BIOS
    setup, system recovery and others, I then press Fn + 11 key to run
    system recovery, but it never runs.
    I then remove the HDD, and connect to my computer to run testing. It
    seems it has something inside corrupted. It takes so long to recognize
    all partitions. I decide to format all partitions and then resize
    them. Afterwards, I run test and chkdsk. Everything is fine with the
    HDD now. I put the HDD back to Laptop, and insert a DVD disc of Win
    7, the laptop does not start from DVD. The screen shows as follows:
    Hard Disk Error
    Please run the Hard Disk Test in System Diagnostics.
    Hard Disk 1 (3F1)
    F2 System Diagnostics
    I visit the above link, I could not find relevant materials.
    If I press ESC to exit start up. I can hear the DVD ROM is running,
    but still not work. The screen shows as follows:
    Startup Menu
    F1 System Information
    F2 System Diagnostics
    F9 Boot Device Options
    F10 BIOS Setup
    F11 System Recovery
    Enter - Continue Start up
    Only F1 would respond when I press. Other Fn does not respond at all.
    Do you have clue and suggestion for me ?

    You do not use Fn + the key indicated.For instance to enter BIOS you simply tap F10. Recovery would have been F11, not Fn + F11.
    You can order Recovery Media from HP for a small fee>> Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Recovery/Reinstall Win7 64bit on Qosmio F60

    I was reistaling my computer using toshiba recovery hdd image and my power whent out and now everything is gone.
    What can I do?
    The only thing that comes up when I start the computer is: Insert system disk in drive.
    press any key when ready..
    I have 6 dvd's from Toshiba that say product reinstal but it aint working.
    I need help...

    Hello
    Hey man what are you doing? It is logic that OS installation should not be interrupted and notebook must be connected to AC power supply.
    What you can do now?
    Only one way to install OS now is to use installation discs.
    Have you created these discs on your own?
    Try please to start installation using disc 1.
    Do you know how to do this?

  • ASDM Launcher doesn't work on Win7 64 bit after reinstalling Win7

    Reinstalled Win7 64bit and have been unable to get the ASDM launcher to work.  I can connect to multiple ASAs via HTTPS.  If I install the ASDM from v6.3.4 or 6.4.5, the launcher for that specific device works fine using:
    C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=https://<ipaddress>/admin/public/asdm.jnlp "C:\Users\rwrussell\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\30\2f5259de-112bec59"
    However, the ASDM launcher which prompts you for the IP address of the node you want to connect to doesn't work.  It pops up and prompts you for the address, username and password but then just hangs at "contacting the device, please wait.  Sniffing the workstation's Ethernet shows that no packets are generated destined for the IP address of the ASA at all.  The ASDM launcher is using the following: 
    Target:  C:\Windows\SysWOW64\javaw.exe -Xms64m -Xmx512m -Dsun.swing.enableImprovedDragGesture=true -classpath lzma.jar;jploader.jar;asdm-launcher.jar;retroweaver-rt-2.0.jar com.cisco.launcher.Launcher
    Start in:  "C:\Program Files (x86)\Cisco Systems\ASDM\"
    The only troubles I see posted on the web are with regards to the launcher installing the target as SYSTEM32 instead of SysWOW64, but this is OK here.  Java version is v7 update 9. 

    Well, I gave up and uninstalled Java 7 and the ASDM.  After installing Java 6 update 27 and then reinstalling ASDM, it works fine again.  I installed Java 7 again while leaving 6/27 installed and had the same issues.  Uninstalled 7 again and everything works fine.
    I really wish Cisco would write Java code that is forward and backward compatible.  It seems we have this issue every few Java updates at which time Cisco will release something like ASDM v61557 or the like if they admit there is an issue at all.  Performing the correct calls instead of taking proprietary shortcuts eliminates this problem with incompatible code between releases.
       ---RWR

  • 3520 driver unable to reinstall on Win7 Home Pro 64bit (hungarian​)

    Hi!
    I am trying to reinstall the driver/software package of this product because after about 3 weeks ago the scanning stoped working.
    Now I am unable to reinstall the drivers. Windows says You have no permission. (even with built in Admin account)
    In the device manager I can see the HP DeskJet 3520 series devices under "other devices" but every instance (plenty of them) is either in state "?" or "!".
    The "?" states says that one of the driver dll is not signed digitaly (C:\Windows\System32\hpinkstsb011lm.dll)
    If I also forced a manual install but the windows complains only in ful Administrato mode, that the Digital Signature is missing.
    The HP official driver install package terminates after finding the device online. The USB install also fails.
    The printer and the programs in associations however works well with an another computer (Win7 Ultimate 64bit English)

    Hi Shwetha!
    Thank You but I am already tried that at first. The installer sais nothing about why it cound not find the printer neither on Wifi (infrastructure and also ad-hoc) nor with USB cable.

  • Itunes 10.5.1 Completly not working in Win7 (64bit)

    This has been a total disaster update for me.  I am running Win7 (64bit) with all my windows updates current.  I went ahead and updated Itunes to 10.5.1.
    That was a severe mistake.  Itunes crashes every time I start the program.  I notice that genius is running right at the start up and I manage to shut it off but it still crashes.
    So far I have done the following:
    Started Itunes in safe mode----Crashes
    Done a complete clean install and reinstall---Crashes
    Downgraded to 10.5 clean install---Crashes
    Upgraded back up to 10.5.1 started back in safe mode--Crashes.
    I have stopped my anti-virus during all installs and starts and it still crashes.
    My system is clean of viruses.
    No error messages are provided for all the crashes other than "This program has stopped working"
    My frustration is awful.  I really hope they get this fixed or someone can offer a solution.  I am so sorry I ran that upgrade.

    After a day 1/2 of frustration and tears I got Itunes 10.5.1 working properly on my Win 7 64bit Home Edition.
    I concluded that the profile, lets call it blue99 was in some way corrupted. The reason is that I followed the troubleshooting steps outlined here:
    http://support.apple.com/kb/ts1717
    Under the heading of Create a New User Account
    I went ahead and created a new profile, lets call it B99.  Under this new profile, I started up Itunes and sure enough it fired right up, Itunes store came up etc with no crashes.  The strange part is that when it started up, the Itunes user agreement came up.  In the other profile where Itunes would crash, after I would re-install, I NEVER GOT THE USER AGREEMENT.  It would just go through an install, and when it would restart, it would immediately start to crash.
    So now I concluded in agreement with the suport article that it was a "user-specific problem"
    With this info, I took a gamble.  I did not follow the "User specific Troubleshooting" offered in the article.
    Instead I followed the directions found here:
    http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile
    I followed these very carefully.  I copied all of my files found under C:\users\Old_Username folder, in this case that would have been the profile  blue99.  From there I copied the folders in there to the C:\users\New_Username folder in this case B99.  The most important rule of thumb is MAKE SURE YOU HAVE FULL ADMINSTRATIVE PERMISSIONS BEFORE YOU START. 
    I then right clicked on the B99 folder and went to Properties and under the Security tab I gave the profile B99 full permissions.  After this I went back to Control Panel and under User accounts I went and turned the B99 profile into full administrator and took the corrupted profile blue99 and switched it too Standard adminstration.
    I restarted my computer and logged in under B99, started up Itunes and Yay!! Itunes is up and running.  No crashes so far!!  When I was running Itunes on the old profile I went ahead and turned off Genius and Home sharing.  In this new profile I turned on Genius and it worked with no crashes.  But I don't want to push my luck so I turned it off.  Itunes has been running with no crashes.  This is what worked for me, yeah its convuluted but I was desperate!!  I don't even consider this a patch, so much as I cheated to get Itunes running.
    If someone has a simpler way to get Itunes 10.5.01 to run, please let me know!!
    Please note when I started this I had already reinstalled Itunes on the corrupted profile.  I did not install Itunes again on the new profile.  I just started it up. 

  • HP COLOR LASERJET CM2320 MFP DO NOT SETUP IT ON THE WIN7 64BIT USİNG IT ON THE NETWORK

    my hp color laserjet 2320 mfp is not possible to setup it on the my win7 64bits when ı want use it like network printer.But since  2 weeks ago ı can see it on the network when ı want to install it using orginal hp product sotware.When installing the software is not found by software on the network.Why ı am not able reinstall it again.But so intresting it is possible install it using win7 64bits drivers.İf ı install it by these drivers ı can not use all funtions of the printer.I want use orginal software for installing it on my computer and to use all faciliies.I tried all possibilities for windows part .Delete all drivers from pc,registry part but no solution. ı would like find a solution.ıs it possible any problem windows part if it is. what kind of problem and solution.Please give me a help...

    HI DeePure, 
    Print out the supplies status page, and let me know if all the colors print correctly?
    Do you have an extra set of cartridges we can use to troubleshoot with?
    Print the supplies status page
    Follow these steps to print out the supplies status page from your printer.
    On the Printer’s control panel, press the Setup button.
    Press the down arrow to highlight Reports , and then press OK .
    Press the down arrow  to highlight Supplies Status Page , and then press OK .
    Figure 1: Supplies Status Page
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • .xlsm File use from Excel 2013 64bit/Win7 64bit to Excel 2013 32bit/Win8.1 64bit - Component Removed (not API related)

    Work Environment:  Excel 2013 64bit/Win7 64bit
    Home Environment: Excel 2013 32bit/Win8.1 64bit (1 desktop and 1 laptop)
    I am developing an an .xlsm file at work (with Lists and a single form with controls linked to a worksheet ControlSource). It works and saves all day long just fine in my work environment. I save the file to either a USB drive (or DropBox - makes no difference)
    and then open the file on my home computer. I can open the file the first time with no problem and with no error messages. But then when I try to save the file Excel 2013 32bit most often tells me that it has removed a component. But it doesn't tell which
    component it has removed. After that, if I close the file and try to reopen it, it won't reopen. I get a series of error message: [1] file path errors (error 75) [2] Excel has stopped working errors. [3] Excel hasn't enough memory to complete the operation,
    [4] Excel will close. So I click the close button on the last error message and Excel disappears. I say disappears, because its not really gone. Mind you, its not listed in the Task Manager at this point. But, if I then click the Windows Taskbar icon to start
    Excel, Excel will sometimes automatically open up with the file that I was trying to open before, already up and running, i.e. I do not select the file to open it - it just appears. Other time Excel just repeats the series of error messages noted above.
    The strange part is, once this file has been corrupted, I can still take it back to my work environment, fire it up on my work computer, and it works just fine. No error messages, no saving problems.
    I have totally uninstalled and reinstalled Office 2013 (HUP Click to Run) on both my home computers and it makes no difference.
    I can say though, this is driving me nuts. Anyone have any suggestions or ideas?
    phillfri

    I think I solved the issue.
    Step 1: Moved all my code from the Worksheet_Open event to the Auto_Open Macro.
    Result: File would open from inside Excel but when opening by clicking on the file in Windows explorer I would get the error msg "There was a problem sending a command to the program."
    Step 2: Apply FixIt 20074. Note that to get this FixIt to work in Windows 8.1 you MUST save the FixIt file to your desktop and run it from there. If you follow the instructions on the FixIt page - download and run - you will get the error msg "This Fixit
    does not apply because the computer does not have the expected software (Excel.exe)."
    Excel 2013 definitely seems to have some bugs when starting a macro enabled file. I have seen other comments on the internet about the Excel workbook_open event actually failing to run all the VBA commands that are put into it.
    Environments:
    [1] Home: Microsoft HUP Click-n-Run Office Professional 2013; Windows 8.1, 64 bit; Excel 2013, 32 bit.
    [2] Work: Enterprise Microsoft Office Professional 2013; Windows 7, 64 bit; Excel 2013, 64 bit.
    phillfri

  • High process while running itunes on win7 64bit

    since i update my ituns i have problem with it i have
    high process while running itunes on win7 64bit in my laptop and also i have backup problems what should i do i see a lots of user on win have same problems as me
    i have removed it and reinstall it for 20 times but it dose not  work

    Windows 7 Home Premium user here, 32-bit as well. It really doesn't appear to matter what is open for me; as long as I've focused on some other window other than iTunes, it will inextricably start skipping almost exactly like a badly scratched CD. This is absolutely unacceptable, because this simply never happened before with any previous version of iTunes. It's simply gotten to the point where there are too many users experiencing the same issue. There are already many forum posts about this problem all over the net too, and Apple techs really haven't even responded about this at all? or are they assuming everyone's going to be more focused on listening to music on their brand new iDevices instead?
    Really, everything is about quality control, right down to the software, and that absolutely should have included iTunes 10.7, but obviously that wasn't the case for my fellow windows users.

  • Unable to reinstall X-FI Fatality Platinum Champion series..

    <Unable to reinstall X-FI Fatality Platinum Champion series.. ok seeing as i got no response at all in my other post here>>>> http://forums.creative.com/t5/Windows-7/X-Fi-Platinum-Fatality-Champion-Series-Win-7-x64-Error-I-000/td-p/547599?and now i have a new problem.. i started a new thread..
    so since waiting for a response here i've noticed that along with my other problems that every now and then that a speaker here and then used to drop out.. then just a little while ago i noticed that i coudn't get anything other than the 2 front speakers on my Z-5500's to work.. so i decided to uninstall and reinstall everything related to the card..
    well just now i uninstalled all things related to my creative card?through the uninstall programs feature?in the control panel.. then ran driver sweeper.. rebooted.. then driver cleaner.. rebooted.. then ccleaner.. rebooted.. then i repeated this process again in safe mode.. then i went to the device manager and removed the x-fi as it was still listed and the multimedi audio controller.. everything went ok.. or so i thought..
    rebooted and began reinstalling the drivers listed as "COMPATIBLE" with Win7 x64.. but i noticed when installing the 2.8.003 driver that it took mere seconds for the sri'ver to install.. rebooted and still no sound.. installed the rest of the drivers and apps listed for my setup and still no sound.. also i noticed over half of the icons in the programs menu never even installed..
    long story short i repeated all the steps mentioned above and tried the drivers from my Vista install disc and got an error saying that the drivers were not compatible with my operating system and was only given the option to exit..
    any and all help would be greatly appreciated THX!!

    Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
    All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

  • HP722c install to win7 64bit

    Can't get HP722C to install on new Win7 Pro 64bit OS. I saw a long post on HP about a "bridge" but it assumed that the driver was installed and just wouldn't work. I can't even get a driver to install. The CD won't work, driver is not on Win7, and HP won't download it from their site. They tell me it's on Win7, but I have done that dance twice and it ain't there! Anybody smarter than me know how to make this 722C work on Win7 64bit? Now tell me simply and slowly, I'm over 65!
    This question was solved.
    View Solution.

    [Please DO NOT post multiple posts on the same subject.  As I composed this message I note you posted three more requests for the same information....]
    There are actually three separate issues that will need to be addressed:
    Most Windows 7 computers do not have parallel ports and the Deskjet 722 only supports a parallel port.  There are USB-parallel converters that can be used, but many of these do not support Windows 7.  Make sure the converter (if you need one) supports Windows 7.  The posts tagged here have models that users have reported success with in Windows 7.  The port you select will depend on the model you have, the port will typically be USB001: or USB002:.
    The driver is delivered through Windows Update.  Lately this has been having an issue with the update failing.  To check this do the following:  click Start, Devices and Printers, Add a Printer, Local Port, LPt1: (for now), Next, click on Windows Update and wait for the list to repopulate.  If you get an error "Windows was unable to get a list..." then see the post here for a workaround.    Once Windows Update has completed and the list is repopulated select HP Deskjet 720, Next, Next, Finish.  (Do not print a test page at this point.)  You can now connect the printer cable, then right click on the Deskjet 720, Printer Properties, Ports and select the proper port.  [I have no way to know what the port will be for your system.  Look for a USBnnn: port or check with the documentation for your converter cable.] Once this has completed and the printer shows up in the Devices and Printers folder you can continue to the next step.
    Next apply the patch available here that resolves this issue of the spooler crashing.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Why i can't setup itune on win7(64bit) ?

    I can't setup the itune on the win7(64bit),
    it always show that i need to uninstall and use the i tunes for 64bits when i connet the i phone with my PC 
    i have check  that  the version is itune64bits version for sure,
    plz help me to solve the problem,thx!

    Uninstall iTunes and all of its components by following this guide: http://support.apple.com/kb/HT1923.  You must follow this guide exactly or it will not be successful. (Uninstalling iTunes only removes the application; it won't trouch your iTunes library or data.) Then reinstall the latest version of 64-bit iTunes.

  • Hp 15-r101na win7 64bit usb doesnt work

    hello,
    I downgraded hp 15-r101na from win 8.1 to win7 64bit, and got a huge problem, all usb ports doesn't work (although they provide power).
    I was unable to update drivers via "Device manager", windows just dont find them.
    I tried downloading drivers from http://support.hp.com/us-en/product/HP-15-r100-Notebook-PC-series/7234951/model/7429481/drivers#Z7_M... , but it did not help.
    Maby someone could recomend third party drivers, or other solution?
    best regard,
    ArnoldasGr.
    This question was solved.
    View Solution.

    Hi:
    The USB 3 driver from the HP 250 G2 should work...
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5449369&swItemId=ob_132256_1&swEnvOid=405...

  • I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am f

    I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am further told that "Adobe apps cannot be installed on case-sensitive drives, you need to Install the product onto an HFS+ or HFSJ non-case-sensitive drive."
    What I don't understand is this:  I originally bought and installed Photoshop CS6 back in March 2013, and it worked fine.  Yesterday my hard drive had to be replaced and my computer person salvaged as much of what was on it as he could, but now I have to reinstall Photoshop.  1) Why did it work before and it's not working now?  2) Is there anything I can do that does not involve reformatting the hard drive?

    It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Mylenium

  • Since automatic update to safari 5.1 it doesnt open any websites anymore. i'm using win7 64bit as operating system. how could i get safari 5.1 to work correctly or downgrade it to earlier version?

    i guess i said all in the topic:
    had an automatic update to safari 5.1, since than it doesn't work anymore, can't open any website.
    i'm using win7 64bit as OS.
    does someone know how to get safari 5.1 to work at win7/64bit
    or how can i downgrade to safari 5.0 again (if i try to download it somewhere, it always switches automatically to safari 5.1)
    many thanks for ur help,
    rainer neumüller

    isn't there any apple admin who knows about this problem and knows how to solve it? i found several post in other fori who had the same problem, none was answered sufficiantly.
    plz give me a chance to use safari again!

Maybe you are looking for