Paying for one product more than once

Hey I've just used my app store account to buy
Whatsapp massenger , the time your system asked me to
insert my payment information I got an alert
tells me that there is a miss match between
card type and number , and I was correcting
That for around four times
Then I was surprised that you got four dollars
From my account to download one app that costs
Only 0.99 dollar

If you re-entered your credit card multiple times, you may be seeing multiple credit holds rather than product charges. If the amounts other than the actual purchase are an even $1.00, then they're almost certainly credit holds and will be reversed by your bank in a few days.
Regards.

Similar Messages

  • Heading for Report appearing more than once

    Hi All,
    I am running a report, the report contain more than 1 lakhs records, how can I avoid the heading of the report to repeat, because as of now heading information is repeating for 50 records.
    Please advice how to proceed on this issue.
    Thanks,
    Mohan R

    write the code like
    top-of-page.
    keep page condition..
    here write the heading
    or
    loop at itab.
    at first .
    here write the heading . This event will trigger only once ;i mean first record of the internal table
    endat.
    endloop.

  • Needing to authorize on one library more than once

    My laptop apparently has a multiple personality. One the same user library that I recently de-authorized, then re-authorized, when I try to play a number of songs, I now get a a prompt on some (but not all)tunes telling me that I need to authorize the computer. These are also songs I originally purchased on this machine. Any suggestions?
    Thanks, everyone. -- Matt

    Hi Nizamudeen,
    Thanks for the information.Suppose we have 20 views all are differenet and .based on condition one view will call another view.So when i open the webdynpro coponent, in the diagram view all views are appearing, it look clumsy as they are overlapping each other.
    Is there any way, we can simplify the design of view in the diagram view section. For example we will put some view in different componenet of same DC and call that somponenet when ever required.
    What is the procedure to do this?
    Thanks
    Susmita

  • How to call the same query more than once with different selection criteria

    Hi,
    Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
    Sales organization XX
                         Income 2008  Income 2009
    Customer A       10                 20
    Customer B        30                  0
    Sales organization YY
                         Income 2008  Income 2009
    Customer A        20                5
    Customer B        50                10
    Now, I need this. At the selection screen of query, user fill variable  charakteristic "Sales organization" with interval  XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
    Thank you very much
    J.

    Hello,
    thanks to all for cooperation. Finally we solved this issue with the following way..
    User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
    J.

  • Why do i have to pay more than once for my purchased album in itunes, when i download them again?

    why do i have to pay more than once for my purchased album in itunes, when i download them again?

    Probably because you purchased them again, instead of following the proper method for redownloading apps.
    Downloading past purchases from the App Store ... - Support - Apple

  • Can I have more than one routing status 4 for one product?

    Can I have more than one routing status 4 for one product in R/3? What impact will have this routings on Financial departament? 
    I am working in PP and | want to implement perfect planification, but I don't know if I have 2 routings for each equipment.
    And also each routings status 4 will have his production version, can financial to do corect calculation?
    Thank you!
    V

    Hi Mangalraj,
    My question is about the impact on financial calculation. I know I can have more 2 or more than that active routings status 4.
    I want to know how the financial SAP guys decide which routing to chose when they run the final month calculation. Or can they make a sum of all routings I have?
    For example if I have:
    - 3 SMT line where I produce one product. So, I want to have dedicate routing for each line and production version.
    In this case if we produce:
    200 part on the first line wich have machine time equal with 4h/100pcs
    800 part on the second line with have machine time equal with 2h/100pcs
    on last one we don't produce now but this have machine time equal with 5h/100pcs.
    I want also to mention that all operations in all routings are marked CostRelevncy.
    So, the production planner will have the perfect planning But how is this for financial SAP specialist? Is easy to manage?
    Thanks,
    Versor

  • Can you create a form in which its never possible for the same person te sign the form more than once.

    Hi, I've been looking into this for awhile and believe the answer is 'no' but was just wondering if anyone here would know of a solution.
    The company I work for has a formulier on which a number of Excel files are placed. This form is then sent to a five (often different) people who are then required to open the Excel files and if accord to place their digital signature. We would like to make sure that no one is able to sign the form more than once and also if possible to make sure they have opened the Excel files. It would be great if anyone had any tips...
    All the very best,
    Martin Angell

    I am not an Excel or Excel-to-PDF conversion expert, so I do not know how Excel forms are converted to PDF form fields. With this caveat here's what I do know.
    In Acrobat It is possible to create a PDF form in which there are JavaScripts associated with fields (any fields, including signature fields). These JavaSripts can do a lot of things, including checking the signer's certificates on the already signed signature fields. Then you can make all unsigned signature fields read-only, in which case the user will not be able to actually sign them. After that you can overlay a button field on top of each unsigned signature field with exactly the same dimensions and associate a JavaAcript with this button field. This JavaScript would put up an UI asking the user for the signing certificate and its password, check this certificate's CN against the list of already signed signature fields and initiate the signing of the unsigned signature field behind this button if your condition is satisfied.
    I never tried that myself but it could work. This looks complicated and it is but if you really want it you can try.

  • CRS Install hostname being used by more than once for the same node.

    Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
    "You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
    Has anyone experienced this error message before and know what the cause is?
    Could it be a problem with the /etc/hosts file?
    Thanks in advance,
    M

    Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
    Also, the installer may complain if your private and public IPs are configured under the same subnet.
    Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
    - public name and IP addresses of ALL nodes
    - private name and IP addresses of ALL nodes
    - VIP name and IP addresses of ALL nodes
    Hope that helps
    B.

  • Product category exists more than once

    Hi,
    We are using SRM 7.0/ECC 6.0 (Ext classic)
    Our SRM was earlier connected to ECC100 and was working perfectly. Now it is connected to ECC200 and working.
    But area of concern is while creating limit SC, when I select a product category, the system displays a message "Product category exists more than once. Use input help". I have deleted all product categories of old ECC system from COMM_HIERARCHY too. This does not occur when I create a normal SC.
    Anyone can please advise?
    Thanks

    hi,
    Check the  Material Group in ECC 6.0
    Check in SRM in the Extended attribute tab whether the backend logical system and the product category are correct
    In creation of shopping cart for the user it is picking from here
    G.Ganesh Kumar

  • Exchange 2010 SP2 RU2 - Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases

    We have been getting intermittent SCOM alarms for our Exchange 2010 MBX server citing "Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases"
    I see events in EventViewer that SCOM is triggering on, but not whats generating the events or how else to test for them.
        get-eventlog -computername SERVERNAME -logname "Application" -after "03/14/2013" | ?{$_.eventid -eq "5604"} | select MachineName,EventID,EntryType,Message | ft -autosize
    One MS Forum post online says it is a bug in RU4, unclear if it may also be a bug in RU2 (our installed version).
        http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/9dcb3011-9327-4935-9479-62b38a6ddd87
        "I was looking for the same error and found this.. it basically says that this is a bug in RU4 and RU4-v2...and it needs to be removed."
    tests using troubleshooting scripts find no issues with search indexer,
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>.\Troubleshoot-CI.ps1
        Get-EventLog : No matches found
        At C:\Program Files\Microsoft\Exchange Server\V14\scripts\CITSLibrary.ps1:622 char:40
        + $msftesqlCrashes = get-eventlog <<<< -computername $Server -after $StartTime -logname "Application" -source $msftesqlServiceName | where {$_.eventId
        -eq $msftesqlCrashEventId}
            + CategoryInfo : ObjectNotFound: (:) [Get-EventLog], ArgumentException
            + FullyQualifiedErrorId : GetEventLogNoEntriesFound,Microsoft.PowerShell.Commands.GetEventLogCommand
        Name IsDeadLocked CatalogStatusArray
        SERVERNAME False {DATABASENAME\SERVERNAME, DATABASENAME\S...
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>
    and tests against searches on each DB themselves show no issues and respond typically within 3 seconds.
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>Test-ExchangeSearch | ft Server, Database, ServerGuid, ResultFound, SearchTimeInSeconds, Error -AutoSize
        Server Database ServerGuid ResultFound SearchTimeInSeconds Error
        SERVERNAME DATABASENAME b16e3461-257c-40dd-a9ad-99a5f41a927e True 2.937
    I also tried to check the Performance Viewer for the MSExchange Search Indexer and MXExchange Search Indices but am unsure which of the many metrics would indicate this issue.
    We have had no reports of search issues from our users and have been unable to duplicate any impairment in our testing.
    Does anyone else have any suggestions for tests to check or steps to take on this alert? Is it simply a false alarm or a timeout of other sorts during testing? We have 80 DAGs on this server (as well as all our servers, some of which have also reported the
    same alert) and the Test-ExchangeSearch command times out before completely testing all DAGs.

    Hi IAMChrisL,
    Any updates?
    Frank Wang
    TechNet Community Support

  • How can I search for files with more than one keyword?

    I´ve created some keywords, and some files in my folder are tagged with two, three or more keywords.
    Is there a way to search for files using more than one keyword on the search field?
    Thanks!

    Use the Find command (menu Edit) and in criteria at the right side is a plus sign to add another criteria and set it to your custom wishes.
    make a choice in results and you should be OK

  • Can I run my creative cloud for teams on more than one computer?

    Can I run my creative cloud for teams on more than one computer?

    Hi Nick,
    We would like to inform you that you can install and activate the subscription on 2 machines, however, you cannot use both of them at the same time.
    Kindly check the point 1.1 from the below mentioned link.
    http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf
    Thanks,
    Atul Saini

  • Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs.

    Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs. What is going on and what can I do to fix this?

    Unfortunately no, It says "Adobe not responding" as well when I try to open a pdf. It has done this a few times where I had to uninstall and reinstall. Also, Illustrator tells me to uninstall/reinstall as well.

  • HT1473 How may one add cover art in iTunes 11, for a CD imported to the library? How may one add more than one images?

    How may one add cover art in iTunes 11, for a CD imported to the library?
    How may one add more than one images?

    I understand what you mean - I too, would like to see some variability in the 'default'. Besides having a single default, I would step that up to a default that changes with genre and media: ie. I could see using a sax for Jazz; a microphone for a Podcast, etc.
    I don't have the answer to your question yet, but I think I'm going to crack open the iTunes package to see what default images there are embedded in there.

  • Inbound interface found more than once for outbound interface

    Hello everybody,
    i have a simple problem.
    I build a interface with XI3.0
    File to idoc
    for each file i need crate 2 idoc.
    It's not a problem when Idoc type is different, but in my case i need crate 2 idoc of same type but with a different mapping.
    so when i upload the file i have this error:
    Inbound interface found more than once for outbound interface
    how can i solve this problem? can i force this step?
    i thought to create a different idoc type or create the 2 idoc in same mapping , but there is not my favourite solution because in case of error , both idoc will be not created.
    any suggestion?
    thanks in advance
    alex

    Hi,
    Instead of exporting and changing the occurrence as suggested by Ravi,
    use the same Idoc twice in mapping as well as Interface mapping.
    Coming to ID part, do every thing as usual.
    The only thing to note is instead of using normal Interface determination, use extended Interface Determination.
    This will solve your problem. The error will not come again. I'm sure.
    Try out and update the thread.
    Regards,
    Jeevan.

Maybe you are looking for