Heading for Report appearing more than once
Hi All,
I am running a report, the report contain more than 1 lakhs records, how can I avoid the heading of the report to repeat, because as of now heading information is repeating for 50 records.
Please advice how to proceed on this issue.
Thanks,
Mohan R
write the code like
top-of-page.
keep page condition..
here write the heading
or
loop at itab.
at first .
here write the heading . This event will trigger only once ;i mean first record of the internal table
endat.
endloop.
Similar Messages
-
Duplicate entries / Employee is appearing twice in report (OR more than onc
Duplicate entries / Employee is appearing twice in report (OR more than once)
When I hire an employee, I assign the position, and based on the positions other values get defaulted /assigned to that employee.
I have one case where employee has been assigned to one position, but with different position descriptions, and in report it is showing duplicate entries for the same personnel number, now client need for one personnel number only one row to display in report
Also I tries to run , Birthday list standard report , it is also showing 2 entries (Or sometime more than 2)for the same personnel number , May I know why this is happening?
And how to fix this bug
Thanks and Regards
Jaydeep JadhavHi,
Can you check where the code is written to get employees from position, there may be two cases where multiple records exists for single person.
1) When getting data for pernr assigning to a position they may missed out date condition. If so we need to bring only active positions assigned to that employee.
2) There may be multiple positions assigned to a single person. In this case you need to ask the client what you need to do.
Delete adjacent duplicate is may not be correct solution as which position we need to delete is not sure. You check above two cases and go head.
Hope this information will help you.
Regards,
Narendra.Soma -
Messages receive appear more than once in my mailbox
The problem is the messages that i receive appear more than once and it keep doing this.
Its like they were cloning or multiplicand, I have until 8 messages of the same thing and this thing continuous happening.
What can I do?, i all ready try the suggestions in the support area in apple, but this does not works with my problem.
I even think that cold be a virus.
Any suggestions will be very appreciate.
ThnaksPlease, try to provide as much information as possible, instead of as little as possible. What’s the time interval chosen in the Remove copy from server popup menu?
It looks like Mail has lost track of which messages have already been downloaded and is downloading them again, or maybe it’s failing to remove them from the server according to your settings.
Try to remove from the server all the messages that have already been downloaded by clicking the Remove now button -- check for new mail first, just in case there is something amiss and that function doesn’t work as expected.
If Preferences > Accounts > Advanced > Remove now fails to remove the messages from the server, you can try to do so manually using the Account Info window. In order to use that feature, choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window. -
Error: An attribute cannot appear more than once in the same start tag
Hi Everyone,
when i run the page sometimes it works fine but sometimes it throws Compilation Error as below.
"Error(502,1224): file:/C:/Jdeveloper/jdevhome/jdev/myhtml/OA_HTML/fwk/t/Session_2055663493/region1.uix<Line 502, Column 1224>: XML-20124: (Fatal Error) An attribute cannot appear more than once in the same start tag."
And i delete the particular file from the path and run the page so this time it works fine.
But later after sometime i get the same error but the session number will be changed, then again i need to delete it and run.
What can be the permanent solution for this issue?
Plz let me know any suggetions.
Thanks.Seems like the mdl file is corrupted or was not generated correctly.
Can you try to create the mdl file again and then try the import ?
If it doesn't work then try contacting Oracle Support. -
Why do holidays appear more than once?
Why do holidays appear more than once?
I have the new iPad and iPhone 5
both run on ios 6
I have multiple holiday calendars on both devices
Step 1: delete your gmail account and calendars go away
Step 2: DELETE your icloud account under setting on iphone and select also delete on iphone
Step 3: add Gmail and Calendar by following directions below (you will NOT get multiple google calendars)
Step 4: go back under setting and sign up for icloud again and turn everythin you want on, ON, even Calendar
You are done, no multiple calendars
**I struggled for a week with this issue and researched online and tried other methods such as unchecking default Birthday icloud calendar, hard reset, uncheck holidays in Gmail, on iphone, none of it worked.....what worked were Steps 1-4 above!!!!)
My iphone 5 is perfect now..no 20 of the same holidays in one day!!!
By the way if you want multiple Google calendars to show up do it this way:
First of you are a gmail user, do NOT use the default gmail sync option if you want ALL of your calendars from Google to show up, multiple colors etc); use MS Exchange, server address is m.google.com
Then go to m.google.com/sync to sync your iphone calendar ON YOUR IPHONE BROSWER, you check mark the calendars you want
Presto, your Google calendars -- all of them -- show up -
Why does 1 cd appear more than once on the ipod
Hi
I have a Classic ipod and use Windows 7; I have a couple of items which are appearing more than once on the ipod but only once on the laptopHi rhduff,
Welcome to the Support Communities!
The following article will help you with this.
Follow the instructions to manually sync your iPad, and remove any songs that you don't want.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113?viewlocale=en_US
I hope this information helps ....
Have a great day!
- Judy -
Members from same dim appearing more than once in a record
I have a dimension, "Day of the Week", with each day of the week as a member. My source data has a field for each day of the week. If the flight ( this is an airline flight database ) operates on that day of the week, there is a value, otherwise, its null. Is there a way to load this as is, or will I have to have a record for each day of the week that the flight operates? The Admin guide states "No member from the same dimension can appear more than once in a record", which I think answers my question, but I wanted to throw it out there to see if anyone else has a solution.thanks
So, the days of the week are columns in your data source? That is no problem for a load rule. Normally you tag a column with the dimension it maps to in the cube. In this situation, when you reach the first week, you tag the column with the MEMBER in the day of the week dimension that it maps to.If this doesn't make sense, perhaps you could post the field layout of your file and myself (or someone else) could tell you how to map the columns in the load rule.Regards,Jade--------------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]
-
'PortfolioBacklogs' cannot appear more than once if content model type is "all"
I'm trying to add another level above feature and have followed these instructions https://msdn.microsoft.com/en-us/library/dn217880.aspx
The project is setup as scrum not agile, maybe that is why???, but I get the following error:
'PortfolioBacklogs' cannot appear more than once if content model type is "all"
and haven't been able to find where to change the content model type.Hi Dckennedy1,
Thanks for your post.
What’s the version of your TFS? TFS 2013 Update 4? Your current team project created using default Scrum 2013.4 process template? After which step you received this error? You can share your error screenshot(s) here.
I created a new Scrum 2013.4 template team project in my TFS 2013 Update 4 Server, and followed the steps in that document to add Initiatives work item type in my TFS Web Access, the Initiatives work item type be added into portfolios successfully, you can
refer to the below screenshot:
The only difference with steps in that document is I edited the PortfolioBacklogs section as below in my ProcessConfiguration.xml file.
<PortfolioBacklog category="MyCompany.InitiativeCategory" pluralName="Initiatives" singularName="Initiative">
<States>
<State value="New" type="Proposed" />
<State value="In Progress" type="InProgress" />
<State value="Removed" type="InProgress" />
<State value="Done" type="Complete" />
</States>
<Columns>
<Column refname="System.WorkItemType" width="100" />
<Column refname="System.Title" width="400" />
<Column refname="System.State" width="100" />
<Column refname="Microsoft.VSTS.Common.BusinessValue" width="50" />
<Column refname="Microsoft.VSTS.Scheduling.TargetDate" width="100" />
<Column refname="System.Tags" width="200" />
</Columns>
<AddPanel>
<Fields>
<Field refname="System.Title" />
</Fields>
</AddPanel>
</PortfolioBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Ld: warning: option -z[defs|nodefs] appears more than once
Wondering, why I get this warning, as soon as I try to link with -xipo. E.g:
cc -zdefs -Bdirect -m64 -L/export/scratch/elkner/build/root4build/usr/lib/amd64 -L/usr/sfw/lib/amd64 -xipo -xO4 -G -h libgif.so.4 -o .libs/libgif.so.4.1.6 .libs/dev2gif.o .libs/dgif_lib.o .libs/egif_lib.o .libs/gif_err.o .libs/gif_font.o .libs/gif_hash.o .libs/gifalloc.o .libs/qprintf.o .libs/quantize.o -lX11
ld: warning: option -zdefs appears more than once, first setting taken
Actually I can't see a second -zdef|-znodef and -## doesn't show a 2nd one either.
So is this a compiler bug?
Regards,
jel.Version is SS with latest patches applied:
cc: Sun C 5.10 SunOS_i386 Patch 142363-03 2009/12/03
Strange - for some unknown reasons, ipo seems to add -znodefs -zmuldefs :
cc -xstrconst -fsimple=1 -xlibmil -xlibmopt -m64 -xarch=sse3 -xdepend -xO4 -I/export/scratch/elkner/build/root4build/usr/include -I/usr/sfw/include -xipo -xvector=simd "-#" -zdefs -Bdirect -o gif2epsn gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a
### cc: Note: NLSPATH = /usr/share/locale/%L/LC_MESSAGES/%N.cat:/usr/share/locale/%L/LC_MESSAGES/%N.cat:/local/apps/sunstudio12.1/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/local/apps/sunstudio12.1/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
### command line files and options (expanded):
### -xstrconst -fsimple=1 -xlibmil -xlibmopt -xarch=sse3 -xdepend=yes -xO4 -I/export/scratch/elkner/build/root4build/usr/include -I/usr/sfw/include -xipo=1 -xvector=simd -# -zdefs -Bdirect -ogif2epsn gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a
/local/apps/sunstudio12.1/prod/bin/ipo -phase2 -# -level=1 -ir2hfpath /local/apps/sunstudio12.1/prod/bin/ir2hf -ubepath /local/apps/sunstudio12.1/prod/bin/ube -fbepath /local/apps/sunstudio12.1/prod/bin/fbe -iroptpath /local/apps/sunstudio12.1/prod/bin/iropt -ipo_ldarg_start /usr/ccs/bin/ld /local/apps/sunstudio12.1/prod/lib/amd64/crti.o /local/apps/sunstudio12.1/prod/lib/amd64/crt1x.o /local/apps/sunstudio12.1/prod/lib/amd64/values-xa.o -zdefs -Bdirect gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a -o gif2epsn -Y "P,/local/apps/sunstudio12.1/prod/lib/amd64:/usr/ccs/lib/amd64:/lib/64:/usr/lib/64" -Qy -lmopt -lc /local/apps/sunstudio12.1/prod/lib/amd64/crtn.o -ipo_ldarg_end
/usr/ccs/bin/ld /local/apps/sunstudio12.1/prod/lib/amd64/crti.o /local/apps/sunstudio12.1/prod/lib/amd64/crt1x.o /local/apps/sunstudio12.1/prod/lib/amd64/values-xa.o -zdefs -Bdirect gif2epsn.o ../lib/.libs/libgif.so ../lib/libgetarg.a -Y "P,/local/apps/sunstudio12.1/prod/lib/amd64:/usr/ccs/lib/amd64:/lib/64:/usr/lib/64" -Qy -lmopt -lc /local/apps/sunstudio12.1/prod/lib/amd64/crtn.o -o /dev/null -znodefs -zmuldefs
### Note: __IPO_LD_FILE_=/tmp/ipo_fAAAErayNZ
### Note: SGS_SUPPORT_32=/local/apps/sunstudio12.1/prod/bin/../lib/ipo/ipo_ld_support.so
### Note: SGS_SUPPORT_64=/local/apps/sunstudio12.1/prod/bin/../lib/ipo/amd64/ipo_ld_support.so
ld: warning: option -z[defs|nodefs] appears more than once, first setting taken
### ---- Invoking iropt for all files
/local/apps/sunstudio12.1/prod/bin/iropt -xipo=1 -F -od /tmp/ipo_dBAAFrayNZ /tmp/old_iCAAGrayNZ -o /tmp/ipo_iGAAKrayNZ -is /tmp/ipo_aFAAJrayNZ -a /export/scratch/elkner/build/giflib-4.1.6/util/gif2epsn.o -Qy -O4 -fstore -xarch=sse3 -m64 -xchip=generic -xcache=generic -fsimple=1 \
-fstore -depend -xbuiltin=%none -xlibmopt -xprefetch=auto,explicit -xprefetch_level=1 -xprefetch_auto_type=%none -xvector=simd -F
rm /tmp/ipo_fAAAErayNZ
rm /tmp/namelEAAIrayNZ
....So probably anannoying bug? -
Why the "Basic" crawled properties appear more than once for each property name?
When i map a managed property and want to select for example "Basic:9" - i see 2 lines of "Basic:9".
why is that so? are there more than one "Basic:9" property?
keren tsurHi keren,
The properties have different types, Basic:9 which has mapped to Path is Text type, the other one is Yes/No type. You could refer to:
http://technet.microsoft.com/en-in/library/hh134087(v=office.14).aspx
If you would like to know about Crawled property data types, please refer to:
http://blogs.technet.com/b/speschka/archive/2010/08/21/finding-which-crawled-property-data-types-match-a-managed-property-data-type-in-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support -
Header Discount getting copied more than once
Hi all,
I have a problem in Quotations in CRM-PCUI. We have renamed the pricing tab as 'Header Discounts'. If we try to copy quotaion, the header discount gets copied as many times as the number of products present for the quotaion, but on clicking save button all header discounts sum up and get consolidated into one. I want to know whether this is Standard SAP bahaviour and how can we change it? We want only consolidated total header discount to appear when we click copy quotation, and not on clicking save button.
I have assigned a Zclass to it and used some badis, but if i deactivate them and use standard class also, then also it behaves in the same way.
Any suggestions in this regard are highly appreciated.
Regads,
Rohit KhetarpalDear,
Please check: How to rescrict the user to enter a manual condition type once in pricing
Manul Condition type duplication control
Regards,
Syed Hussain. -
Mapping for field which appear more than once.
Hi experts.
My source and target structure is:
Field1
Field2
Field3
___Child1
___Child2
___Child3
Field4
Field3 may appear a few times in the source message.
For example:
Field1
Field2
Field3
___Child1
___Child2
___Child3
Field3[1]
___Child1
___Child2
___Child3
Field3[2]
___Child1
___Child2
___Child3
Field4
I need to pass to the target structure the "Field3" who's "Child1" is greater than 5 and "Child2" is greater than 10 and "Child3" is greater than 15.
My problem is that the condition is executed only once for the first "Field3",
and if the check returns
"True" all the "Field3" are copied.
if "False" is returns no one of the "Field3" is passed.
How should i hold the context for it, in order each of the "Field3" elements passes the condition?
Regards Max.hi,
map required Field3& Child1 field with the target with the required conditions and set the context of both to the higher level.
Regards,
NJ -
Paying for one product more than once
Hey I've just used my app store account to buy
Whatsapp massenger , the time your system asked me to
insert my payment information I got an alert
tells me that there is a miss match between
card type and number , and I was correcting
That for around four times
Then I was surprised that you got four dollars
From my account to download one app that costs
Only 0.99 dollarIf you re-entered your credit card multiple times, you may be seeing multiple credit holds rather than product charges. If the amounts other than the actual purchase are an even $1.00, then they're almost certainly credit holds and will be reversed by your bank in a few days.
Regards. -
MIGO - Posted lines can appear more than once
Hi Gurus,
when posting inb. dlvs. with MIGO, sometimes we get some of the lines posted multiple times, I guess we've understood the reason why but we're still looking for a solution (instead of saying to the user "leave the transaction and get back in later..."):
The "multiplication" of lines happens when MIGO is executed several consecutive times and at least one material/batch is still being processed by the previous MIGO posting:
1) start MIGO, key in inb. dlv. number, execute Post
2) perform the same as # 1 with a new inb. dlv. number and execute Post
if at least one of the materials/batch from inb. dlv. # 1 is also contained within inb. dlv. # 2, due to slow performance, you could get the following error message: "Batch xy of material abc is already locked by asdfg"; MIGO screen will remain empty, field to key in inb. dlv. number will be cleared.
At this point, if the user will type in (again) the same inbound delivery number + F8, assuming the lock had been removed in the meantime, the program will "double" the lines (or add the lines up to the one the program reached before to raise the error message).
Sounds like a program bug, error message M3682 should stop the program or clear the buffers, otherwise there's no way the use can know something was read and stored "behind the scenes" and is going to be used as soon as the lock will disappear.
Any help/suggestion will be really appreciated.
EnricoPlease, try to provide as much information as possible, instead of as little as possible. What’s the time interval chosen in the Remove copy from server popup menu?
It looks like Mail has lost track of which messages have already been downloaded and is downloading them again, or maybe it’s failing to remove them from the server according to your settings.
Try to remove from the server all the messages that have already been downloaded by clicking the Remove now button -- check for new mail first, just in case there is something amiss and that function doesn’t work as expected.
If Preferences > Accounts > Advanced > Remove now fails to remove the messages from the server, you can try to do so manually using the Account Info window. In order to use that feature, choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window. -
The same album appears more than once in cover flow
*1st question:* I just got my i-pod and i-tunes pulled album artwork automatically for the songs i put in i-tunes (not all of them of course), but when i view them on my i-pod using cover flow it will have the same album cover 2 or 3 times side by side. How do i get the cover flow option to only show one album? Why is it doing this - doubling up on an album with the same songs? Do i have to rename the album within the properties of the mp3 files to make them all the same?
*2nd question:* Can i assign a mp3 file or song to a specific album within i-tunes? If i have a song that i don't know the album name of or if i don't care and just want it with other songs for an artist can i add that song to an album that is already established within i-tunes and has album artwork? I also want to use this to get rid of the grey boxes for songs that i-tunes could not find album art for - i just want to put all of these random songs into one album. Can i do this somehow?Can i assign a mp3 file or song to a specific album within i-tunes?
Right click - get info and type in an album name.
If i have a song that i don't know the album name
I'd give it an album name of Unknown Album
I also want to use this to get rid of the grey boxes for songs that i-tunes could not find album art for - i just want to put all of these random songs into one album. Can i do this somehow?
Select all the songs, right click - get info.
Give them an album name (such as Unknown Album) and paste in a picture of your choosing.
Maybe you are looking for
-
How to assign a URL in the Tabular Form
Hi, I am using the htmldb.item api's to create manually,the Tabular form. I have got a column in the database(View) like ''||substr(DESCRIPTION,1,30)||decode(substr(DESCRIPTION,30,1),null,null,'...')||'' DESCRIPTION, which displays as a URL and when
-
Is it worth it spending $200 dlls in the new Microsoft Office 2008 for Mac?
I am trying to decide whether to upgrade my Mac to the new Microsoft Office 2008. Is it worth it? What are the differences between the new version and the old one?
-
Question on WHEN-VALIDATE-ITEM Trigger in Forms 6i
Hi, I am working with a form which has two different database blocks. When I enter some valid data in block 1 and hit tab, a key-nxtblk trigger navigates the cursor to the next block. Now this second block has some fields which were disabled at the d
-
I have 9 topics in a sub-folder. After I generate the project, all of the topics appear in the output folders. 3 of the 9 topics cannot be found when I search through the RoboHelp interface and they appear as Page Not Found for my context sensistive
-
SampleCode for MQnWLS -- Unresolved:'wlsmqXAQCF'
Hi, I try the Using MQSeries as a Transactional Resource Manager with Weblogic Server V. 1.0. When I excute the sample code: java MQClient t3://localhost:7001 "hihi" occurs some error-message. Have an