Payment document upload- error in the claering dates.

Hi All,
I gone through the document numbers in production system the following dates are updated for this documents.
What we need is to find the root cause for the issue of why would two documents does not get cleared while the other 3 were cleared immediately. Also, we had system issues today during the same time. Please check if you can find any OSS messages out there on what happens if the system shuts down while the finance documents are being processed. Do they get stored in a temporary table some where and what would cause those documents to be passed to PCA while they are in this u201Climbou201D?
please find the below documents for refernce.
Sl No Document No Document Date Posting Date Baseline Dt clearing Date
1 123 2/6/2010 2/6/2010 2/6/2010 2/11/2010
2 456 2/6/2010 2/6/2010 2/6/2010 2/11/2010
3 789 2/6/2010 2/6/2010 2/6/2010 3/01/2010
4 145 2/6/2010 2/6/2010 2/6/2010 2/11/2010
5 234 2/6/2010 2/6/2010 2/6/2010 3/01/2010.
the diffrenec in it picking the diffrerent claering date. but it has to pick the same date for all the documents.
Please let us know why it is picking the different claering dates and sometimes it performing the System shutdown.
Note: these 5 documents are updated in BKPF table for the date 2/11/2010 but it should not cleared all the documents. it has cleared only 3 documents.
        and only 3 documents are updated in GLPCA table for the date 2/11/2010 and two cleared on 3/01/2010.
now the problem is why it has updated BKPF table for all the documents on 2/11/2010,even the documents are not cleared?
Thanks and Regards
Prathap

closed

Similar Messages

  • To split the payment document value as per the line items of the P O

    To split the payment document value as per the line items of the purchase order in the period of payment, so that the payment  amounts are measured against the Capex order assigned as account assignment in the purchase order.(Account assignment tab for the individual line item in the PO.
    Example:
    Inputs:
    Purchase Order 3100012345, line item 10 value 6000 line item 20 value 4000
    VAT @10% , account assignment for PO line item 10(Internal Order no 10001) & line item 20  Internal  Order 10002) G/ R no 5105105101 for Rs10,000.
    The I/R doc 501501501 appears as follows: (MIRO)
    Line 10: Value       Rs   6,000
            20: Value      Rs   4,000
    VAT                         Rs      600
                           Rs      400
    Total                       Rs11, 000
    Withholding Tax Rs 1,100
    The accounting entry for MIRO happens as follows: doc 2102102101
    GR/IR Dr      Rs 10,000
    VAT      Dr     Rs   1.000
    Vendor    Cr           Rs9, 900
    TDS due   Cr          Rs1, 100
    The business expects the payment report as follows:payment  doc 2001200101
    PO     Line item       Internal Order MIRO         Invoice                       Payment       Payment period  Amount
                                                                                    A/c doc number        doc number          
    3400012345     10     10001           5605605601  2102102101           2001200101       001/2009           5940
    3400012345     20     10002     5605605601     2102102101           2001200101        001/2009          3960
    Currently we are able to show the amounts as Rs 6000 for line item 10 & Rs 4000 for line item 20.
    The problems faced.
    1.     The VAT line items are auto created, hence the reference of purchase order number and line item are not available. So the VAT portion which is part of payment liability does not get reflected against the PO.(not able to show the VAT portion , when we try to show the payment amount per PO line item.)
    2.     The withholding tax is also a problem; WHT is not calculated and assigned per line item. It is calculated on the total amount of basic and VAT. Because of these reasons, the payment could not be shown properly according to the line item of the purchase order.
    3.     When part payment is made, against invoices, there is no provision to assign a payment amount against a particular line item. Further, when final payment is made in different period, the clearing document will get generated. That adds to the complexity of differentiating full payments and part payments final clearing.
    4.     When residual payment is made, a new line item is created. Here assignment of Purchase order line item against payment for residual items become a problem.
    5.     Many a times advance payments are made. Later the invoice is created and balance payment is made. In those situations, the clearing document creates one more line item and makes payment for the balance item. This adds complexity in bringing balance payment alone and to split as per the purchase order line item. The clearing document number system is multi dimensional. It creates two line items for the same item (one at the time of advance and another the time of clearing.)
    6.     When full payment is made, the payment document number and clearing document numbers are same. In cases of subsequent or partial or residual payment, the document numbers are different. Because of this, the part payment amounts are shown in the period, where the final payment and clearing are made.
    Please suggest a way to split the payment amount in the exact posting period with all the considerations given above.
    Regards
    Sundararajan
    Edited by: Sundarajan Venkatachari on Sep 30, 2009 11:04 AM

    Hi,
    See Note 301077 - User exits for the interface to accounting, although I think that there isn't this kind of option. Note 429117 - Collective note advice note SD-FI interface will be useful too.
    I think that SAP Note 1085921 - Document split perhaps will help you
    Regards
    Eduardo

  • Error #1107     The ABC data is corrupt, attempt to read out of bounds.

    Today i stumbled upon the "Error #1107 The ABC data is
    corrupt, attempt to read out of bounds."
    I googled the problem, but the only suggested workaroud (foud
    in the bugbase - https://bugs.adobe.com/jira/browse/ASC-2289) was
    not applicable to my case. The problem was reproduceable with Flex
    3.2 and Flex 4 SDKs.
    However, commenting out parts of my code, i found out that
    the problem was causing my set of test data, which was
    syntactically correct, but very very large (static const Array with
    34611 objects to be precise). I deleted half of the test objects
    and the error was gone.
    Hope this helps somebody ...

    Nevermind I fixed it..
    you just change the default program you open swf's with in windows..

  • How do I retrieve previous versions of a word document I created? The meta data shows 4 previous versions and I need to retrieve all of them. Any help?

    How can I retrieve previous versions of a document I created? The meta data shows that there are four previous versions and I would like to retrieve all four. Any help?

    vlekkas wrote:
    How can I retrieve previous versions of a document I created? The meta data shows that there are four previous versions and I would like to retrieve all four. Any help?
    Word is a Microsoft Program, you will get more knowledgable answers at Microsoft Support for Office

  • Copy of leading document(PO) not having the same data as created in SRM

    SRM5.0 Extended Classic Scenario
    I have created the SC and PO for that is created successfully as 700006304.
    Now when I am trying to create any SC after that, the leading document of EBP goes into error in process in follow on document block.
    All the successive PO 7000063041, 7000063042 are going into error in process and displaying another data in the backend with the creation of goods/receipt and invoice.When I try to go into that invoice it says that it doesnot exist.
    When I see in the backend found out that data that I have taken for creating the PO is not copied to ECC system , It displays some another data, may be fetching different PO data having confirmation and invoice detail which i have not done at the SRM side.
    As we know that the leading document of EBP (PO) is copied to the ECC system in ECS( Extended classic scenario) but in our case I am surprised that from where it is fetching the different data for the copy of leading document in backend.
    I have scheduled  the two background jobs too mentined below even then this problem is not corrected.
    1) BBP_GET_STATUS_2
    2) ZCLEAN_REQREQ_UP
    Kindly advice.
    Edited by: SAP jayoti on Jul 1, 2010 11:36 AM

    I have seen details in BBP_PD :-
    For first PO its displaying workflow status complete & Document Completed. Its fine.
    For the successive PO's  - Status is Transfer Failed (E.Sys). But workflow status is complete.
    I have checked the external number range at SRM and ECC side too.
    At SRM side ,Number range set up for PO
    From Number 7000000000 To Number 7999999999 Current Number 7000063059
    At ECC ,Number range set uo for PO
    No - 70, From Number 7000000000 To NUmber 7099999999 Current Number 'Blank'
    External munber range is set at ECC for SRM PO.
    There is no overlaps for the different document type PO range .
    Kindly Advice.
    Edited by: SAP jayoti on Jul 1, 2010 2:38 PM

  • Terms of payment(75 days net from the invoice date.payme25 th of the month)

    Hi
    I need to configure the below payment term
    "75 days net from the invoice date, payment 25 th of the month"
    Please suggest  me.
    Regards
    Prasad

    "75 days net from the invoice date, payment 25 th of the month"
    you cann try this
    Tcode OBB8
    Default baseline date = Document date
    Payment terms
    Term 1:- Fixed date= 25
                  Additional months=2

  • Error Activating the ODS data

    Hi Guys,
    I am facing an error while activating the data in the ODS.
    The data is loading perfectly fine but when activating the ODS data the following error is coming
    <b>Request REQU_3ZI9CZ369HR6SM49OL9ULRVKM, data package 000031 incorrect with status 5 in rsodsacstreq
    System error occurred (RFC call)
    No confirmation for request ODSR_3ZI9DUVOMM02L1I777X5YX9QU when activating the ODS object PA_ODS1
    There is no PSA for InfoSource 8PA_OA001 and source system BWPCLNT641 ( The data laod is without PSA )</b>
    This is happening after we had a BWQ refresh .
    I thought this has something to do with the BASIS guys but they say they checked everything.
    Need Help

    Hi Sidhu,
    There were red requests in the ODS but I deleted them and tried activating the green requests , even when there are only 4 records it is not activating the data.
    I checked the RESREQDONE table but I dont see these requests in there.
    I checked the SM58 there I saw a lot of errors
    <u><b>ALEREMOTE    RSAR_TRFC_DATA_RECEIVED       BWQCLNT641    10/17/2005 18:50:48 ERROR REQU_3ZHNIS265F9F6HJQ8PY838046 PG# 21 In BW</b></u>  
    one line in that is this . can u throw some thought on this. when I try to execute this LUW it says that function module RSAR_TRFC_DATA_RECEIVED doesnot exist or exception raised message. I got these yesterday but today I got only one and when I executed that LUW it gave me the same message but that error message is not showing now
    Regards
    Majeed

  • Down payment document not picking up the PC , but picking up the segment

    Dear Sir/Madam,
    We are making one down payment against a Purchase order through T code: F-48 in the vendor line item we are putting the PO reference. It picks up the segment on the basis of PO, but is is not picking up the Profit center in the general ledger view. This does not allow to post the down payment entry.
    KIndly advice how the same can be resolved.
    Prashant Zinge

    Hi,
         By default the payment will go to the bank that is listed first in the vendor master. If you do not need the old details, delete them completely from the master data and leave only the new ones. Alternatively use the Partner Bank field to assign the invoice to which Bank the payment is to be made.
    Kind regards

  • Web upload error message:  the resource does not exist

    Hi - I am trying to build a few Flash-based web galleries from within LR using selections of images made as 'Quick collections'.
    I have entered my FTP settings and saved as a selection - including testing that LR can get access to this by selecting the browse button next to the server path.
    When I hit upload, I see the following progress detailed in the progress pane and then an error dialog:
    - checking FTP connection settings
    - exporting image bin
    - building web photo gallery
    'An error occured sending the file : the resource does not exist'
    Any ideas?
    Many thanks,
    Simon

    Hi - I am trying to build a few Flash-based web galleries from within LR using selections of images made as 'Quick collections'.
    I have entered my FTP settings and saved as a selection - including testing that LR can get access to this by selecting the browse button next to the server path.
    When I hit upload, I see the following progress detailed in the progress pane and then an error dialog:
    - checking FTP connection settings
    - exporting image bin
    - building web photo gallery
    'An error occured sending the file : the resource does not exist'
    Any ideas?
    Many thanks,
    Simon

  • Error message 'The Outlook data file (.pst) failed to load for this session.' when adding PST in Outlook addin

    Hi All,
    I have an Outlook (2003-2013) addin developed using C# (NOT VSTO).
    A new client (using the desktop client for Outlook 365) has got a COMException error message stating 'The Outlook data file (.pst) failed to load for this session.' at the code line where I add the PST store (using Microsoft.Office.Interop.Outlook.NameSpaceClass.AddStoreEx).
    I have never come across this error message before and there is barely any mention of this message on any forums. The only question I could find regarding this has been asked mid 2014 and hasn't been answered.
    I'm fairly sure this is not related to either DisablePST or PSTDisableGrow registry key settings as I check fore their existance and notify the user separately.
    Could anyone help me out on how to resolve this? I do not know where to begin even.
    Thanks!!
    Cheers!

    Hi Eugene,
    Thanks for the reply.
    I pass the location that the PST is to be created (as a string), and the OlStoreType.olStoreUnicode constant.
    The client is using a network location to store the PST file (even though we advised them not to) - leading to many corrupt PST files (that they are apparently happy to live with), but this is the first time we came across this message.
    I would assume the problem is with that file, as no other clients are having any issue like this.
    Have you come across this error message? Do you know what sort of scenario could be responsible for it?
    Or would I have to file it under "random problems generated by network PSTs"? :P
    Cheers!

  • Using DW CS6; when uploading a site DW changes all dates to today; how can I upload without changing the file-dates?

    Using DW CS6; when uploading a site DW changes all dates to today;
    how can I upload the site whilst preserving existing file-dates?
    Thanks
    Paul

    How are you uploading?
    I do not see this behavior in DWCS4 or DWCC (I assume nothing changed in DWCS6 and then back for DWCC, but I could be wrong).
    However, when I upload, I only select the files I have modified after an initial "Upload Entire Site? Yes/No" prompt. If you aren't selecting specific files to upload, and you're overwriting the files on your server with new copies of your entire local site each time, the mod dates would show as the date/time of your upload.
    To select only the files that have changed since your last upload...
    1. Right click on your local root folder in the Files window under Local View
    2. Go to Select > Newer Local from the context menu
    3. Wait until DW is done talking to the server, it could take a while, when it's done, all of the files that have a newer mod date locally than their server counterparts will be selected
    4. Click the Put (up arrow) button
    For me, this process never changes the dates of files that aren't part of the upload.

  • Unable to create a billing document , have to change the posting date

    Dear All,
                      I have performed the following steps:
                     1. I have created Customer
                     2. Created a material.
                     3. Linked the customer to the material
                     4. Post initial stock for the material.
                     5. Create a Sales/Order.
                     6. Displayed the sales order and recorded the scheduled delivery date.
                     7. Created the delivery for the sales order.
                     8. Transfer the stock from the warehouse management
                     9. And update the order.
    While updating the order I selected post goods issue and it would not go ahead because the posting date is not there in the posting period. Where do I change the posting date. I could not find it anywhere. I did not enter the date anywhere.
    Thank you,
    Sandhya

    Hello Sandhya
    Here is how MMPV works.
    Lets say I am at the end of the May month 05.31.2009 so lets say period corrresponding to this is 05/2009.
    Now if you want to post data in June perios 06/2009 should be opened.
    Here is what I will do in MMPV
    Enter my company code
    Instead of using periods I will use date which will be 06/01/2009 (mm/dd/yy format in my example)
    Check radio button check and close period
    Click on remaining checkboxes.
    Execute
    The effect of this will be that the previous periods will be closed and June will be opened.
    In your case since no one has opened periods after 2006 so may be you will have to repeat this step for each month until you reach current period if that is the one in which you want to post goods issue.
    Thanks
    Vikas

  • Windows 7 "There was an unexpected error in the perperty: Data supplied is wrong tupe. (0x8007065D) Please close the the property page and try again.

    How to fix Help

    Hi,
    We nee more detailed information to help you analyze your issue. How did you come across this error, launching the Internet Explorer or  other action?
    Karen Hu
    TechNet Community Support

  • KM Document Upload Error - java.lang.NoClassDefFoundError

    Hi
    While Uploading the document in KM Content we are getting the Java Exception Error
    Class java.lang.NoClassDefFoundError
    com/sapportals/wcm/repository/manager/cm/SystemRIDFactory
    Exception:
    java.lang.ClassCastException
            at com.sapportals.wcm.control.generic.WcmErrorControl.readInputData(WcmErrorControl.java:553)
            at com.sapportals.wdf.stack.Control.triggerInput(Control.java:473)
            at com.sapportals.wdf.WdfEventDispatcher.dispatch(WdfEventDispatcher.java:172)
            at com.sapportals.wdf.WdfCompositeController.onWdfEvent(WdfCompositeController.java:538)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at com.sapportals.htmlb.page.DynPage.doProcessCompositeEvent(DynPage.java:204)
            at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:142)
            at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115)
            at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
            at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:75)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
            at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
            at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
            at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
            at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
            at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
            at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
            at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
            at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
            at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
            at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
            at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
            at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
            at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
    Note: This is not a permanent error, after 15-30mins we are able to upload the Documents. We are not able to analyse it.
    with regards,
    Mohamed Thahir

    hi,
    I can suggest you check the Generator URL setting. Or May be there is connectivity prob with content server . so check both of them.
    Regards
    RS

  • ICloud document uploading error

    Whenever I try to upload a document (.docx, .xlsx, or .pptx) into the iWork tab in www.icloud.com , I always get an error stating "There was a problem uploading the document. Please try again." Can I use the iCloud service as Google Drive (to upload a document and download it somewhere else?)

    Welcome to Apple Support Communities
    You have OS X Lion and it requires OS X Mountain Lion. You can upgrade to OS X Mountain Lion, so open App Store > Purchases, and download Mountain Lion (I tell you this because it looks like you already have Mountain Lion in your other iMac; if you didn't purchase Mountain Lion, purchase it).
    While it's being downloaded, make a backup of your files and check that your apps are compatible > http://www.roaringapps.com When the download finishes, the Mountain Lion installer will show up, so follow its steps. After upgrading, open a iWork application and you will be able to see the iCloud files.
    Another way to see them without upgrading is to open http://www.icloud.com, log on with your Apple ID and select iWork

Maybe you are looking for