Payment Run Date Search

Hi everyone,
In the payment program F110 I would like to minimize the search of Run Date / Identification to the last 100 and not the last 5000.
How can I do this?
Kind Regards,
Quintin Venter
Edited by: Quintin Venter on Mar 27, 2008 10:12 AM

Hi,
Here you can filter date wise and check from which date you do want, hope understood..but system shows as many as you have irrespective comp code and date with different vendors...
Thanks,
Vasu..

Similar Messages

  • Create and maintain a payment run date field

    Hello,
    I have to use a payment run date on selection screen of my Bex report. The dates of payment run  this year have been given to us. In order for this date to be maintainable (say for next year the date changes by one or two days) , what kid of object do i create in BI side ?
    And how do i tell my Bex report that If i select this particular payment date, then data in the report will be corresponding to date only?

    Hi,
    You cannot create you own Time charactersitics in BW they are already delivered, examples are 0calday, 0calmonth etc, can you not use 0calday in this case and map the source date field from where ever you load the data to to this time characteristic?
    Best Regards,
    Des

  • Z-Program not able to pick up Payment Run date & Identification.

    Hi,
    I created a Z-Program for Payment file creation.
    This Z-program able to pick up Payment Run Date & Identification if I run it alone ( back ground and fore ground).
    My issue is, if I run it from F110 with variant, it is not able to pick up the Payment Run date & Identification.
    I used following code to get the Payment Run date. (SAP Version 4.6C)
    *------- SPA/GPA-Parameter
    DATA:    BEGIN OF gpa,
               laufd             LIKE f110v-laufd,
               laufi             LIKE f110v-laufi,
             END OF gpa.
      IF p_laufd IS INITIAL OR p_laufi IS INITIAL.
    Get the parameter values for Run Date & Identification from F100, if
    User not passed the above parameters while running this program
        GET PARAMETER ID '110' FIELD gpa.
        MOVE : gpa-laufd TO p_laufd.
        MOVE : gpa-laufi TO p_laufi.
      ENDIF.
    Your help appreciated.
    Thanks,
    Reddy

    Hello,
    What exactly is your requirement?
    IF p_laufd IS INITIAL OR p_laufi IS INITIAL.
    * Get the parameter values for Run Date & Identification from F100, if
    * User not passed the above parameters while running this program
    GET PARAMETER ID '110' FIELD gpa.
    MOVE : gpa-laufd TO p_laufd.
    MOVE : gpa-laufi TO p_laufi.
    ENDIF.
    Your code will execute if the user doesnot pass Run Date & Run ID. But you CANNOT execute F110 without passing Run Date & Run ID.
    Hope this helps.
    BR,
    Suhas

  • Any function module to retrieve all Payment Run Data

    I am looking for a RFC enabled function module which would retrieve all the data related to Payment Run.( Tables REGUH REGUP, PAYR, BKPF, BSEG)
    Any idea or pointers ?

    Hi
    U can use FM  RH_STRUC_GET to get the pernr in the evaluation path
    data : IT_RESULT_TAB     TYPE STANDARD TABLE OF SWHACTOR .
                CALL FUNCTION 'RH_STRUC_GET'
                  EXPORTING
                    ACT_OTYPE  = C_OTYPE
                    ACT_OBJID  = W_POSIT
                    ACT_WEGID  = C_WEGID (relation B002 like )
                    ACT_BEGDA  = W_BEGDA
                    ACT_ENDDA  = W_BEGDA
                   ACT_TDEPTH = 1 ( depath 1, 2, etc )
                  TABLES
                    RESULT_TAB = IT_RESULT_TAB .
    Nb : Give points if it worths

  • Payment order to pick lineitems due on future date then run date

    When we use payment order option for any payment method defined it means that :Where a payment order is to be carried out at some time in the future, the line items are not cleared very much earlier than the date on which the payment is made.
    However i have a question
    Point 1 :Should i run the payment run on a future date.
    Ex: If there is an invoice dated 03.03.2010 and due on 15th March 2010,should i run it as on 3rd March and will still the line item be picked up to be paid inthe future.
    or Should i run the payment run as on 15th March to get the item picked.
    I have another question here ,if i run as on 15th March ,will it pick up lint items which are due on 16th or any date after that.
    Where do i define to system ,if i run a payment run it should ppick up line items due upto so and so date and create the payment order.
    Please advice.

    OK The posting run date is a reference date -
    The posting date is when the actual payment posting date will be and the date of the clearing of open items
    Docs entered up to field - looks at when documents have been posted i.e. entry date
    Items due by - is the due date of documents to be included in the payment run.
    Further to this you need to enter the next payment run date. This is used for cash discounts, if a Vendor has a cash discount payment term it will include the invoice for payment if the date used in the next payment run would mean cash discount would not be available.

  • Payment Due Date selection in F110

    Hi Experts,
    We have defined a payment term with 2% discount in 30 days time. We take the baseline date form the shipping date via substitution. We execute the payment run two times in a week.
    Now say if the shipping date is 03.08.2010 then due date for discount of 2% will be 02.09.2010 (Which is Thursday). We execute the payment run on Wednesday (01.09.2010) and Friday (03.09.2010) every week.
    Now when we do the payment run on 01.09.2010, the next payment date given is 03.09.2010 and thus this document got selected as it is due on 02.09.2010. But as 02.09.2010 was holiday, so we could have paid that in 03.09.2010.
    How to avoid such kind of scenario, when a document due date is a holiday falling just before the next payment run date, should be paid on that next payment run date? (This will save us the interest for 2 u2013 3 days and the amount is huge, so the total effect will be high.
    We are currently excluding such documents in free selection tab manually, but takes a lot of time.
    Thanks,
    Atif

    Hi,
    Only in the scenario when you have the payment run date just next to the holiday date, (And you do not lose the discount if you pay on the day next to holiday), then
    I will suggest putting the next payment date as that holiday date.
    So in your example given above, I will suggest to put the next payment run date as 02.09.2010 in the payment run of 01.09.2010, so that the documents falling due on 02.09.2010 does not get included in this payment run of 01.09.2010.
    And then when you execute the payment run on 03.09.2010, this document will automatically come as it is falling due on 02.09.2010
    Regards,
    Gaurav

  • F110 Payment run Problem

    Hi All, I have few doubts in running F110 Transaction,
    1) Is it Time Dependant? I mean to say I schedule Payment run today for 3 vendors and Next Payment run would be 2 days from now i.e on 01/21.
    2)Can I have another Payment run for different Vedors Tomorrow 01/20 and Next Payment run date as 01/21 again? when I try to edit the Proposal it gives ccod xxxx/xxxx do not appear in Proposal xx/xx/xxxx Test-1:Correct
    3) If a vendor is having 3 Line items one is Payable immediately, second is 14 day time and last one is payable in 30 days ,when I choose this Vendor in F110 today, will it take all three lne items payable?because I want to pay him all ,I tried this but system is taking only one Line item why?
    Thank you ,
    Paarthaa,

    Hi Mike Thank you for your Time to reply,I tried to take over 40 day time period as next Payment run date for one Particular Vendor with 3 Line Items having for him, out of Three, two are already over due and one is having 30 day Grace Period ,according to you as I gave 40 day time for next Payrun the system should Pick all 3 Line Items but it is not doing, it is Picking only one Line item  with Least Amount,this time I dont see the error messgage during the Edit Proposal,
    "How can I decide Next Payrun date with out Showing That Error Message during Edit Proposal"? if I am choosing 100 vendors at a time for APPrgram? One thing for sure that error messgae is dependant of Next Payment Run date,
    Thank you ,
    Paarthaa,

  • Next payment run parameter in automatic payment program

    hi gurus
    why next payment run date must be given in parameters tab of automatic payment program
    thanks and regards
    ramesh

    Dear,
    yes but You should create a background job of F110S, where You define a dynamic date variable variant as per Your requirement,  by SE36.
    I hope this helps.
    Mauri

  • F110- Payment run parameters

    Hi Experts,
    Can anyone please tell me how can I  keep  company code and payment method as defalut values to avoide data entry again and again as my client use only checks.
    Thanks in advance
    Kumari

    Hi,
    There is option to copy parameters from previous run. Please see if below workaround is fine.
    In F110 enter payment run date and identification.
    Now select parameter tab, from here you Edit > Copy Parameters.
    This way you can copy parameters from the previous payment run.
    Best Regards,
    Raju

  • How to include not due invoices in payment run

    Hi Gurus,
    Good day.
    Kindly advice how we can include invoices that are not due in the payment run to avail discounts.
    Thanks in advance.

    Hi Ellen,
    As a SAP standard, if according to payment terms assigned to a document, has cash discount  and the due date is between the payment run date and the next run date, it automatically gets included in the current run date.
    SAP also includes documents in the current payment run if the documents become overdue by thenext run date entered in the parameters but not due for the current rundate.
    You can do F1 in the Next p/date column to get the SAP help.
    Please revert for any clarifications.
    Thanks and Regards,
    Anit

  • F110-How to define DME file name in OBPM4 composed of Paym Run Date+Name

    Hello,
    In OBPM4 there are 2 options to define the name of DME file by standard settings:
    1. If the file name is not defaulted by the parameters, it is generated by the program.
    2. If the user defines the file name, a four character sequential number is also assigned.
    Is it possible to define (by some customization, function, UE.....)
    the file name which will be dynamically composed of Payment Run and Payment Date?
    For example, 09082009CH001 while 09082009 is Payment Run Date and CH001 is Payment Run Date.
    Thank You in Advance

    HI,
    OBPM4 is for maintaining the variants for the DME file output. IN OBPM3 you can write an ABAP program (function module) in the event module selection of the customer setting. At our clients place we have used this to define the file name as well as the path in which the file needs to be saved.
    Hope this helps.
    Thnaks and Regards,
    Anit

  • Table for payment run

    Hi
    Can any one tell me in which table  i can have the details like vendor number and vendor name and bank account number will be stored after the execution of payment run,i am looking for the solution for the particular payment run only.with that i can be able to sort out how many vendor bank account numbers that had payment for any payment run.
    Thanks
    Lily

    Hi Karthik,
      I am working on functional specifications for printing the checks generated after automatic payment run in another interface which the client is using. Can you please let  me know which table the data will go after the payment run is executed. I am having trouble figuring out the check number in tables. I would appreciate and award points if you can help find the table containing payment run data and also a functional specification for printing the automatic payment data through other legacy system interface.
    Thanks in advance
    Ramesh Yadav

  • Printing check for partial processing of payment run without voiding

    Hi,
    Our payment run (Done via F110) has created only some checks for some payment documents, as the check lot got exhausted.
    How to print the check now for the remaining payment documents without voiding the earlier one? (As we have issued those checks to vendors.)
    Thanks,
    Bhaskar

    Hi,
    Please do below:-
    1. Create the new Check Lot in FCHI transaction as the next lot for the expired check lot
    2. Go to SE38/ SA38 and give your check printing program (Like program RFFOUS_C). Execute.
    3. Give the Payment Run date and identification in this program selection screen
    4. GIve the New Check Lot number here from which you need to print.
    5. Give the Payment Document number range for which the check needed to be printed
    Then system will generated the checks for the remaining payment documents.
    Regards,
    Gaurav

  • Run date problem in F110 - automatic payment program

    Hi.
    I am trying to run the automatic payment program in F110. I am facing the problem with the run date in this transaction. System is not giving me any error if i give the run date as today's date or future date.
    But in run date if i give previous date system is not executing the automatic payment program.
    Eg: Inovice posted on 01.01.2012. It becomes due on 01.01.2012. I gave run date as today's date 04.01.2012 or future date the system is executing correctly picking all invoices. But if i give the run date as previous to the current date i.e., 02.01.2012 or 03.01.2012 then system is not executing this transaction.
    This problem is coming for all company codes. So if there is any setting for restricting run date request you to help me in this regard where can i do such setting.
    Regards,
    Padmavathi

    Hi.
    My problem is solved.
    Actually client is entering the documents with posting date for earlier months whereas he has entered the documents this month.
    Therefore system is not picking the invoices in F110 - automatic payment program.
    Actually the run date entered is getting copied to the parameters entered i.e., posting date and documents entered upto date.
    Documents are entered in the system this month with posting dates of previous months. Therefore if i give the run date as this month date the run date is getting copied to doc entered upto date in the parameters tab as this month date. So only system is not picking invoices since invoices are entered in the system this month only.
    Now we changed the date for doc entered upto with previous month date and system is picking the invoices.
    Thanks a lot for your help.
    Regards,
    Padmavathi

  • Payment Run (F110) error for MT103 - BFIBL02-303 - Bank Data is incomplete

    Hi,
    I'm trying to do a foreign vendor payment run in F110. We have a payment method type Z for these vendors, and FBPZ I have this payment type set to use the Payment Medium Workbench (PMW) with MT103 format.
    When I run the proposal I receve the error message BFIBL02-303 - Bank Data is incomplete (Bank country  , bank key  ). Looking at the MT103 produced I thought it was due to the vendor bank details missing, but I've checked the vendor and they aren't.
    I've tried to dig around in the code a little and notice that the 303 error message is produced in LFPAYM_SWIFT01 in Form FILL_BANK_FIELD (Fills bank fields (S.W.I.F.T. fields 52, 53, 54, 56, 57)), which looks as if it is our (the sending) bank details that it is failing on, though I can't see why.
    Does anyone have any ideas?
    The MT103 produced looks as follows:
    BANKGB22
    103
    :23B:CRED
    :32A:111026EUR999,99
    :33B:EUR999,99
    :50K:/12345678
    Our Name
    Our Address Line 1
    Our Address Line 2
    Our Address Line 3
    :52A:BANKGB22
    :59:/
    Customer Name
    Address Line 1
    Address Line 2
    Thanks
    Ben

    Hi
    Check in tcode FBZP for the payment method for this country, in the screen for required master record specifications. You might have bank details. After, in the settings for country (SM30/V_005_B 'Country Field Checks') check the values for this bank. In the data for vendor you need data for bank, in in required master record specif. you need bank data. If you have the SWIFT maybe you have to populate it in vendor.
    I hope this helps you
    Regards
    Eduardo

Maybe you are looking for