Payment Term -- Explanation in ME23N

Hi friends need help
iam doing a report in which i have to display payment term explanation exactly as it is .
I tried by using ZFI_TEXT_ZTERM. and aslo treid to
pick it from T052 and T052u .. but iam unable to get it .
regards
will definetly reward points

Hi Farukh
try this:
DATA: BEGIN OF XT052.
        INCLUDE STRUCTURE T052.
DATA: END   OF XT052.
DATA: BEGIN OF ZTEXT OCCURS 0.
        INCLUDE STRUCTURE TTEXT.
DATA: END   OF ZTEXT.
SELECT * FROM T052 WHERE ZTERM IN S_ZTERM.
REFRESH: ZTEXT.
CLEAR:   ITAB, ZTEXT.
ITAB-ZTERM = T052-ZTERM.
XT052 = T052.
CALL FUNCTION 'FI_TEXT_ZTERM'
EXPORTING
I_T052 = XT052
TABLES
T_ZTEXT = ZTEXT.
loop at itab.
write: / ztext.
endloop.
endselect.
Regards, Dieter
Message was edited by: Dieter Gröhn

Similar Messages

Getting Payment Terms Text of PO

Hi All,
I need to get the Payment terms text of PO.
I am able to get the Own explanations from T052U table.
The payment terms entered in the PO can be got using Read_text passing F07, EKKO and the PO number.
What i need is getting the Explanation of First Payment Term, Explanation of Second Payment Term and Explanation of Net Payment Term.
Regards
Arun

check table
T052U
<b>Hi ARUN ,
i am unable to get ur Point ? Can u tell me more abt this ?
if i am giving payment term = 1050 @ PO header ? So what do u want to get ? long text of 1050 or what ?</b>Regards
Prabhu
Message was edited by: Prabhu Peram

How to download explanation texts of Payment Terms.

Hi All MM Experts,
I am a ABAPer.One of the MM consultant in our project wants to download the payment terms with the explanation texts (which is usually in multi line) in OME2 transaction. I have tried table T052 and T052U but it didn't help.
Any pointers on the same will be highly appreciated.
Thanks in advance,
Saket

It creates the texts for the payment terms in the input table I_T052 using the text symbols in program SAPLFHL2.
It means you cannot download the text from any table directly.
you have to write a program to download it, in this program you have to execute the function module to get the texts.

Explanation text in Payment term obb8

Hi ,
I have created a new payment term II50 - payable in 2 installments , 50% in advance and balance in 15 days after invoice.
How should I add text in the explanation field in OBB8 ?? This text field is not enabled . screenshot attached.

Hi
You need to populate payment terms
I hope this helps you
Regards
Eduardo

Explanation of First Payment Term

HI All,
I want to get the Explanation of First Payment Term from the Payment term definition,
Under the SPRO, I found the Technical Information showing table name R052, however, I cannot find it under SE16...
Does anyone know the table name, pls help.
Thanks.
Terry

Hi terry
Goto SE11 and enter R052, press display button. on next screen it will display R052 as structure, click on "WHERE USED" button, and select tables.
It will display all the tables containing R052 fields. Try to find out the required table among them.
Currently I don't have the SAP system, else I could have told you exact answer.
try and revert

ME23n payment term

I would like have a checking when the user change the default payment term, then show a warning message and user have to press enter to pass it. How can i do that, Thanks!

Hi
U can handle this in PAI and display the warning messages using a Popup window which can be done using any of the FM 'POPUP*'.
Thanks
Vasudha

Missing Payment Term field on tcode FBR2 Customer Invoice Display

Hi Experts,
This is a more detailed explanation on the Payment terms field issue we are encountering since last week.
I have some problems with their request that they want to show the payment terms field in the transation code FBR2 - Customer Invoice even if the Sales Area Data for Customer is not maintained but Company Code Payment Terms is maintained. I need help on the configuration on how to show the field.
What I researched is that there are 2 maintainance of Payment Terms Field:one in the Company Code and another in the Sales Area. As I read on some forums, the Payment Terms in Sales Area should be the default when using the SD Process however, the Payment Terms in the Company Code should be the default value when they use FBR2 - Customer Invoice. But thay still cannot see the payment terms field in the Accounting Document they already created.
I already checked in transaction OBC4 the Reconcilliation Account Group and the Payment Terms field is optional there and even the Posting Key 01, which is also optional.
Please help me on this. Thank you.

I did some checking on the past few posting, and I found some posting to the same account also the same tcode FBR2. However, the other one is with posting key 01 - Invoice.
The Problem occurs when we use FBR2 then the posting key is 09 - which is a special g/l posting for the account. How can I check why the "Payment Terms" field is still not displayed or cannot maintain in this transaction?

FB10 - Default payment term for Credit memo

Hi,
I have question regarding the Payment terms in FB10- Credit memo entry (KG).
You must be aware that when we use F-43 or FB60 for posting Vendor Invoices (Document type KR), the payment terms on the screen will be "*", which means it should be picked up from the Master data. Similarly for posting Vendor Credit Memos (Doc type KG) using F-41 or FB65, the payment terms field is blank, which means 'Immediate payment'.
In case of FB10, Fast entry transaction code for both Vendor Invoice and Vendor Credit memo, the Payment terms for KR document is *. But for doc type KG (Credit memo), payment terms field is not blank. Instead, it is shown as *. Why is it? How can we make this blank for KG document postings. Please advise. Kindly revert in case you have any questions.
Regards,
Vinod

HI,
Please check the note 17410 for explanation.
Regards
Ravinagh Boni

Payment terms in Credit Memo

Hi Experts
This refers to credit memo to vendors thru FB65.The vendor master has payment terms populated which gets carried forward in case of a credit memo.
The solution of entering a "credit memo" payment terms in the vendor master has been explored but has been put on hold for practical reasons and making changes to already existing vendor masters.
Is there a solution whereby,at transaction level, the system takes a separate payment term during credit memo other than the invoice payment term.
We are on 4.7 EE version
I tried to check out substitutions - but the payment term is not a substitutable field in OBBH.
The main idea is that we do not want to disturb the vendor masters and get a solution at transaction level
Any thought or workaround will be much appreciated.
Regards
Swami

Hi Srikanth,
As you perfectly mentioned,field ZTERM is not allowed to use for substitution in standard: take a look to table GB01.
The entry is excluded. If in your system is not excluded you used a modification. Note 42615 explains which fields can be substituted.
Pmnt terms work in the following way for credit memos:
1. if 'V' is entered in field 'invoice reference', due date is calculated the same way as for an invoice.(this means you also
have to enter the terms of payment in field bseg-zterm. With entry 'V' you only indicate that the due date of the credit memo is not identical to the payment period base date, if you have entered a special terms of payment in the document)
2. If credit memo refers to an invoice, you can enter invoice details in field bseg-rebzg (invoice ref.)so that credit memo will pick up same payment terms as invoice.
3. if '*' is entered in field 'paymnt terms' then the payment terms are picked up from customer/vendor master record.
Hope the explanation is helpful to you.
Best regards,
AZ

Translation of payment terms in CS and SK in program SAPLFHL2

Hello,
is there somebody who works on a system with system language CS and/or SK, who might send me the translations of the text symbols of program SAPLFHL2?
In english, they are these:
001     Field name;;
002     Fd name
003     Field description
004     Payable immediately
005     Due net
006     &1 % cash discount
007     Within &1 days
008     Before &1 of the month
009     Before &1 of the next month   ;;
010     Before &1 in &2 months
011     On immediate payment
012     For incoming invoices until &1 of the month
013     Payable in &1 partial amounts
014     Payable in 1 partial amount
015     &1 installment: &2% with payment term &3
016     Baseline date on &1 of the month
017     Baseline date on &1 of next month
018     Baseline date on &1 in &2 months
019     Baseline date postponed by a month
020     Baseline date postponed by &2 months
021     PTrm;;
022     Explanation                                                 ;;
023     &1 installment: &2 %
024     Within 1 day
025     Payable in partial amounts
026     End
027     Terms of Payment
112     For Invoicing up to &1 of Month

Hi,
you can maintain entries in table TVZBT using transaction SM30 only if the "Data Browser/Table View Maint." value is set as Display/Maintenance allowed for the table (Check using transaction se11 --> Delivery and maintenance tab). You can change the value to "Display/Maintenance allowed" if you want to maintain entries using SM30. Make sure that you assign an authorization object so that the table entries can be added only by authorized persons.
If the above option is not feasible
Create a Z-table(Same as TVZBT) with fields Paymnet terms, language and description. Access this table through smartform to print the description in different language.
Make sure that the Z-table is updated while creating/changing any payment terms. By this way you can maintain any languages.
Hope this solves your issue.
Thanks
Arun

Payment term creation

Hi Gurus,
i m creating payment term with obbd i want to write full description also consisiting 10 lines.

Hi,
Use t. code OBB8, If u want to create new clcik on new entries, give the 4 digit paymen tterm key , if u want to maitain only for MM give the description in own explanation , select the radio button for default for baseline date, give the paymen tterm days in no. of days, and then save.
regards,
zafar

Need help regarding payment terms f4 for purchase order

hello everyone,
im currently workin on smartform for purchase order so transaction code is me23n in dat 1st tab delivery/invoice can u see payment terms field its technical field name is ZTERM in dat if u click on f4 ull find tht value along with description say eg 0001 payable immediately due net lik dis it comes so i need to display ths text i.e payable imm... lik dis in my smartforms field im unable to retrieve tht text element i gt 1 function module also ie Fi_F4_ZTERM here im gettin whole record i wnt only 1st record i.e 0001 payable if u click on f4 thr r many records...so whn u go to me23n ie for display u shd hav value tht is alrdy stored lik dis u check ulll understand.. thnx in advance fr ur help...

Hi,
The text of payment terms is stored in table T052U.
You can get the payment terms of a PO in table EKKO and field ZTERM.
Pass the value of this field i.e. EKKO-ZTERM to T052U-ZTERM and T052U-SPRAS as SY-LANGU .
You will get the description of the payment terms maintained in the PO.
Regards,
Vinod

Invoice Reference Number "V" + Blank Payment Terms field

Hi Experts
Need your validation on one point. I have credit memos with invoice reference number field filled with "V" but payment terms in document is blank.
Payment terms in Vendor Master Data is XXXX (Net due 30 days). But when I run the Payment Program within 30 days for this vendor, the credit memo is picked up and adjusted.
Is my understanding correct that it is because of the following reasons -
By putting V in invoice reference number, the system will overlook the payment terms mentioned in Vendor Master Data and follows whatever is mentioned in the document.
And because the payment term field is empty in the document, it is taking baseline date as payment due date and thus picks the document in F110 program.
Points will be rewarded to replies with explanations.
Regards
Arjun

Arjun,
please check my comments:
By putting V in invoice reference number, the system will overlook the payment terms mentioned in Vendor Master Data and follows whatever is mentioned in the document.
In all cases the document entry overlook the master data entry. The vendor works as default values during document entry.
And because the payment term field is empty in the document, it is taking baseline date as payment due date and thus picks the document in F110 program.
Don't change the document defaul entry if you want the vendor assignment. If it's blank you have to assign same Payment terms from you vendor otherwise you will have only the baseline date.
Best Regards

Payment terms in different languages

Hi, how can I do to see a payment terms in more than one language? I will created it in spanish, but I need to see it in different languages.
Thanks,
Cecilia
Moderator: Please, search before posting

Hi,
The solution referred to above (OBB8, choose languages, translate) updates the 'Own explanation' of the paymen term', in table T052U. And probably that covers your requirement completely.
However, the 'Sales text' of the payment terms is in table TVZBT, and cannot be translated in the above way.
I had a requirement to have the 'Sales text' of the payment term also in different languages.
Rather than logging on in each separate language and maintain the 'Sales text' in OBB8, we updated table TVZBT directly with SE16N, and transported the entries through the landscape.
Not quite the standard way, but it works just fine.
Regards,
Rob

Payment terms in SD credit invoices

Hii,
We have problem with the payment terms in credit invoice and maybe you can help me.
When a credit invoice is created based on a SD invoice the field Invoice reference "REBZG" is filed un the original invoice.
The problem is that the payment terms and bline date is not taken from the original invoice.
Is there a badi or user exit that can do this.
Thank You
Orna

Hi Srikanth,
As you perfectly mentioned,field ZTERM is not allowed to use for substitution in standard: take a look to table GB01.
The entry is excluded. If in your system is not excluded you used a modification. Note 42615 explains which fields can be substituted.
Pmnt terms work in the following way for credit memos:
1. if 'V' is entered in field 'invoice reference', due date is calculated the same way as for an invoice.(this means you also
have to enter the terms of payment in field bseg-zterm. With entry 'V' you only indicate that the due date of the credit memo is not identical to the payment period base date, if you have entered a special terms of payment in the document)
2. If credit memo refers to an invoice, you can enter invoice details in field bseg-rebzg (invoice ref.)so that credit memo will pick up same payment terms as invoice.
3. if '*' is entered in field 'paymnt terms' then the payment terms are picked up from customer/vendor master record.
Hope the explanation is helpful to you.
Best regards,
AZ

Payment Term -- Explanation in ME23N

Similar Messages

Maybe you are looking for