Payment Transfer Prinitng using Z-script

Dear All,
I am trying to print Payment transfer form from the transactions FB60 and F110.
Here I have taken the Z-copy of the Script form "F110_D_AVIS" and modified the script to my requirement.
Then I assigned the Z-form in the FBZP transaction.
But the output is coming as it is in the standard. The Z-form is not reflecting in the payment transfer output.
On the other side, I changed the form to "F110_CH_AVIS" in the FBZP transaction to test whether that standard is reflecting. But it is also not reflecting in the output.
Can anyone help me. what could be the reason for this issue?

Hi,
I tried all your options. It is also not the transportation problem.
I even tried Script debugger, it is not breaking at the script position.
Now with different options.. I tried the Japanese Bank transfer script and program, but the output itself is not coming.
Also I tried with taking Z-copy of the driver program which was assigned in FBZP trxn and kept break point in front of the OPEN_FORM function module.. then also it is not breaking while running in F110.
Can anyone show the way to resolve this issue?

Similar Messages

4.6C FI-FM Payment transfer settings.

Hi, everyone!
Can you give me an advice whether it is possible to change settings of Payment transfer program (RFFMS200) from S200 Original Functions to S200 Enhanced Function, considering that there are actual postings already recorded in the productive system.
Thanks.

Hi Julie,
Please kindly consider the following SAP notes and all the related notes mentioned in each one:
429225 - Migration FI-FM to SAP R/3 Enterprise Public Services 1.10 *** to me, the most important one
427546 - Important notes for FI-FM and PSM-FM *** THIS IS MORE A GUIDELINE WITH ALL IMPORTANT NOTES
669764 - FI-FM migration to R/3 Enterprise (4.7) EA-PS 2.00
827329 - Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00)
1082741 - Migration to ERP 6.0 (EA-PS 6.00)
1030497 - SAP ERP 6.0: Public sector scenarios in new general ledger
You should consider all the migration notes from the releases in the middle of 4.6c and ECC 600.
I used it for a migration and it worked
Just a hint, any issue with FI-FM which calls in ECC6 now, kindly report in one of the following forums:
Expert Forums - Industries - Public Sector
Expert Forums - SAP SOlutions - ERP Financials
There you will find a lot of people that works with FI-FM (new name PSM-FM) and can help you with future issues, including me
I hope I could help you
Kind Regards,
Vanessa Barth.

Payment transfer program with PSCD

Hi,
The payment transfer program works if we use FIAP
But when pay vendor invoices through the process of PSCD we have the status paid but we don't see which vendor invoices have been paid.
Does the program works normally with PSCD
Best regards
Salvator

The process payment in PSCD, to make for cash desk and/or payment lot, then
You need configure for payment, the seletion category R- REFERENCE FOR PAYMENT FORM, when to apply the payment.
and aditional in Account balance display, for when to see the balance of contract account or business partner.
When to do the aplication of payment, it need write the invoicing number
I hope that my coment help you

ISU FI-CA Payment transfer - Transaction FP40

Hi, we want to build a payment transfer functionality to transfer one payment document from one contract account to multiple contract accounts or contracts with amounts meaning the payment documents will be 500 and we want to transfer to two contract accounts, 250 each. Can you please advice me on which BAPI to use to do the transfer to more than one receiver?
Transaction FP40 can only transfer from one to one and we need to do one to many.
Kind Regards

Hi.
It's a single idea, but it could work
use BAPI_CTRACDOCUMENT_TRANSFER to transfer open FI-CA Items. But it work whit one document on time.
You can make a program and control the transfer. first split a single document and call this BAPI for each target document.
Juda

Passing flexfield from report wrapper to seeded report using shell script

I am unable to pass flexfield values from report wrapper to seeded report using shell script
below is the shell script that i am using to transfer GL Account High and GL Account Low to the seeded program Receipt Journal Report (ARXRJR). the flex fields get passed through the parameter v_param_12 and v_param_13. but all i am getting in the seeded report log file is the reporting level,reporting context,set_of_books,period, gl_date_low/high .
#TEST Program for Passing GL Account High and GL Account Low
v_user_name=`echo $3`
v_login_pwd=`echo $FCP_LOGIN`
v_prog_name=`echo TESTARXRJR`
echo 'v_prog_name: '$v_prog_name
# testing for passing the arguments from CM ...
if [ -z "$1" ]
then
echo "Please pass the first argument...."
exit 1
fi
v_request_id=`echo $4`
echo 'v_request_id: '$v_request_id
v_param_1=`echo $5`
echo 'v_param_1: '$v_param_1
v_param_2=`echo $6`
echo 'v_param_2: '$v_param_2
v_param_3=`echo $7`
echo 'v_param_3: '$v_param_3
v_param_4=`echo $8`
echo 'v_param_4: '$v_param_4
v_param_5="$9"
echo 'v_param_5: '$v_param_5
shift
v_param_6=`echo $9`
echo 'v_param_6: '$v_param_6
shift
v_param_7=`echo $9'`
echo 'v_param_7: '$v_param_7
shift
v_param_8=`echo "$9"`
echo 'v_param_8: '$v_param_8
shift
v_param_9=`echo $9`
echo 'v_param_9: '$v_param_9
shift
v_param_10=`echo $9`
echo 'v_param_10: '$v_param_10
shift
v_param_11=`echo $9`
echo 'v_param_11: '$v_param_11
shift
v_param_12=`echo $9`
echo 'v_param_12: '$v_param_12
shift
v_param_13=`echo $9`
echo 'v_param_13: '$v_param_13
shift
v_param_14=`echo $9`
echo 'v_param_14: '$v_param_14
shift
v_param_15=`echo $9`
echo 'v_param_15: '$v_param_15
shift
v_param_16=`echo $9`
echo 'v_param_16: '$v_param_16
shift
v_param_17=`echo $9`
echo 'v_param_17: '$v_param_17
shift
v_param_18=`echo $9`
echo 'v_param_18: '$v_param_18
shift
v_param_19=`echo $9`
echo 'v_param_19: '$v_param_19
shift
v_param_20=`echo $9`
echo 'v_param_20: '$v_param_20
shift
v_param_21=`echo $9`
echo 'v_param_21: '$v_param_21
shift
v_param_22=`echo $9`
echo 'v_param_22: '$v_param_22
shift
v_param_23=`echo $9`
echo 'v_param_23: '$v_param_23
echo "Executiong SQL to obtain org id and responsibility name"
(sqlplus -s /nolog <<end_of_sql
conn $v_login_pwd
set heading off
set echo off
set feedback off
SELECT 'ORGID:'||b.profile_option_value || ':' ||e.responsibility_name
FROM fnd_profile_options a,
fnd_profile_option_values b,
fnd_concurrent_requests c,
fnd_responsibility d,
fnd_responsibility_tl e
WHERE c.request_id = $v_request_id
AND c.responsibility_id = b.level_value
AND b.profile_option_id = a.profile_option_id
AND a.application_id = b.application_id
AND c.responsibility_application_id = d.application_id
AND d.application_id = e.application_id
AND a.profile_option_name = 'ORG_ID'
AND c.responsibility_id = d.responsibility_id
AND d.responsibility_id = e.responsibility_id;
exit
end_of_sql
) > a.log
v_var=`grep -iv "ORG_ID" a.log|sed 's/Connected.//'`
echo 'v_var: ' $v_var
v_org=`echo $v_var| awk 'FS=":" {print $2 }'`
v_resp_name=`echo $v_var | awk 'FS=":" {print $3}'`
echo 'v_org :'$v_org
echo 'v_resp_name :'$v_resp_name
echo 'Sumitting Receipt Journal Report...'
user_request=`CONCSUB $v_login_pwd GL "$v_resp_name" $v_user_name WAIT=Y CONCURRENT AR ARXRJR \
          \"$v_param_3\"\
          \"$v_param_4\"\
          \"$v_param_5\"\
          \"$v_param_6\"\
          \"$v_param_7\"\
          \"$v_param_8\"\
          \"$v_param_9\"\
          \"$v_param_10\"\
          \"$v_param_11\"\
          \"$v_param_12\"\
          \"$v_param_13\"\
          \"$v_param_14\"\
          \"$v_param_15\"\
          \"$v_param_16\"\
          \"$v_param_17\"\
          \"$v_param_18\"\
          \"$v_param_19\"\
          \"$v_param_20\"\
          \"$v_param_21\"\
          \"$v_param_22\"\
          \"$v_param_23\"`
user_request=`echo $user_request|awk '{print $3}'`
echo Request is $user_request
trx_rep_file="$user_request"
echo 'trx_rep_file: '$trx_rep_file
sleep 10
for i in 1 2 3 4 5
do
if test -f $APPLCSF/$APPLLOG/l$user_request.req
then
if test [`grep -i '"Concurrent process completed successfully"' $APPLCSF/$APPLLOG/l$user_request.req`]
then
if test -f $APPLCSF/$APPLOUT/o$trx_rep_file.out
then
echo +++++++++++++++++++++++++++++++++
               echo 'output file found'
               echo ++++++++++++++++++++++++++++++++++++++
else
echo +++++++++++++++++++++++++++++++++++++++++
          echo failure in Report listing production
          echo +++++++++++++++++++++++++++++++++++++++
fi
break
else
echo +++++++++++++++++++++++++++++++++++++++
echo Job not Over Yet
     echo +++++++++++++++++++++++++++++++++++++++++++++
fi
echo +++++++++++++++++++++++++++++++++++++++
echo File not found yet
echo ++++++++++++++++++++++++++++++++++++++
fi
sleep 10
done
echo ----------------------------------------------------------
echo Transaction Listing process over
echo ---------------------------------------------------------
echo ----------------------------------------------------------
echo Executing SQL to derive Search Pattern
echo ----------------------------------------------------------
v_pattern=`sqlplus -s /nolog <<EOF1
conn $v_login_pwd
     set heading off
     set echo off
     set feedback off
     SELECT 'SEARCH^'||meaning||'^'||attribute1||'^'||attribute2||'^'||attribute3
     FROM fnd_lookup_values
     WHERE lookup_type = '$v_param_2'
     AND lookup_code = '$v_prog_name';
exit
     EOF1`
echo 'v_pattern: '$v_pattern
v_pattern_n1=`echo $v_pattern|sed 's/Connected.//'|awk 'FS="^" {print $2}'`
echo 'v_pattern_n1: '$v_pattern_n1
v_pattern_n2=`echo $v_pattern|sed 's/Connected.//'|awk 'FS="^" {print $3}'`
echo 'v_pattern_n2: '$v_pattern_n2
v_pattern_n3=`echo $v_pattern|sed 's/Connected.//'|awk 'FS="^" {print $4}'`
echo 'v_pattern_n3: '$v_pattern_n3
v_pattern_n4=`echo $v_pattern|sed 's/Connected.//'|awk 'FS="^" {print $4}'|sed 's/ //'`
echo 'v_pattern_n4: '$v_pattern_n4
echo 'v_param_12: '$v_param_12
echo 'v_param_13: '$v_param_13
echo -----------------------------------
echo Deriving final output
echo ----------------------------------
v_var=`cat $APPLCSF/$APPLOUT/o$trx_rep_file.out | grep -i "$v_pattern_n1"|\
               sed "s/(/-/g"|sed "s/)/ /g"|\
               sed "s/$v_pattern_n1/$v_pattern_n2/g"|\
          sed 's/ /~/g'|\
sed 's/~~*/~/g'|\
               sed 's/ *//g'|\
               sed 's/,//g'`
echo 'v_var: '$v_var
v_var_2=`cat $APPLCSF/$APPLOUT/o$trx_rep_file.out|grep -i "$v_pattern_n3"|\
               uniq`
v_out_1=`echo "$v_var"|grep -i "$v_pattern_n2"|awk 'FS="~" {print $3}'`
echo 'v_out_1: '$v_out_1
echo 'v_var_2: '$v_var_2
echo ------------------------------------------------------------
v_out_2=`echo "$v_var_2"|grep -i "$v_pattern_n3"|awk 'FS=":" {print $2}'`
echo 'v_out_2: '$v_out_2
echo ----------------------------------------------
echo Process comleted
echo ----------------------------------------------------
echo ================================================================================
#---------------------------------------------------------------------------------------------------

The name of this OTN group is "Database - General"
Your question relates to an unnamed application that might be E-Business Suite, or PeopleSoft, or Siebel, who can say.
Please re-ask your question in the appropriate applications forum and be sure to clearly name the full product name and version. We are not mind readers and we can not look over your shoulder.

Unable to capture the adf table column sort icons using open script tool

Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Unable to turn column headers bold in Word table using VB Script

I have created a table in Microsoft Word 2010 using VB Script (this is via the script engine that forms part of HP Quality Centre functionality). The table itself is OK, 2 columns with centred headers. However, I am unable to make the column
headers bold. I have spent hours searching the net and trying various options to no avail can somebody please help me.
Set objWord = CreateObject("Word.Application")
Set objDocument = objword.Documents.Open(Src_Dir & template_file
Const wdAlignParagraphCenter = 1'var to control justification of the table columns
Const NUMBER_OF_ROWS = 1 'number of rows in intial table
Const NUMBER_OF_COLUMNS = 2 'number of colums in the intitial table
'search for the "TAA_TABLE" bookmark embedded in the document template, this is where the table will be created
Set objRange=objDocument.Bookmarks("TAA_TABLE").Range
'create the table
objDocument.Tables.Add objRange, NUMBER_OF_ROWS, NUMBER_OF_COLUMNS
Set objTable = objDocument.Tables(2)
'populate column headers
objTable.Cell(1, 1).Range.Font.Bold = True
objTable.Cell(1, 1).Range.Text = "Sub Contractor"
objTable.Cell(1, 2).Range.text = "TAA Number"
'centre the column headers
objDocument.Tables(2).Rows(1).Select
Set objSelection = objWord.Selection
objSelection.ParagraphFormat.Alignment = wdAlignParagraphCenter
'format the table with plain grid lines
objTable.AutoFormat(16)
'set the column widths
objTable.Columns(1).Setwidth 230,0
objTable.Columns(2).Setwidth 230,0
Any help is graetfully appreciated, as this is driving me wild.
Cheers,

Hi Citronax,
I haved noticed that you used objTable.AutoFormat to format the table. Based on my understanding, this fuction will applie a predefined look to a table.
After I move the code which bolder the text behind this line of code, it works well for me.
'format the table with plain grid lines
objTable.AutoFormat (16)
objTable.Cell(1, 1).Range.Font.Bold = True
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can we use Java Script in SAP BusinessObjects Web Intelligence 4.1?

Can we use Java Script or any other Script in BI 4.1 Web Intelligence? If possible please do let me know the method/process

Hi Kranthi,
You have option to read a cell content as html. else you will have to go for SDK. I think you will get better suggestions, if you can explain your requirement in a little detailed manner.
refer below links for more details about SDK.
http://bukhantsov.org/2013/04/how-to-create-a-webi-document-using-java-report-engine-sdk/
Regards,
Nikhil Joy

Using Powershell Script Run simple query in MS Access 2007 and export the results of query to Excel

Hi Experts,
I have a Access 2007 DB file and 2 Big tables inside that (bigger than the size that can be easily handled by MS Excel 2007).
My requirement is automate using powershell scripts the below things.
1. Create a SQL query in Access DB and save that in access DB
2. Run the saved query and export the result in excel sheet where I can create the charts and Pivots. Thanks in advance
Prajesh

Do you have to use the Access query, couldn't you just recreate the query in Powershell? Here's a link with good info that references an existing script for querying an Access database:
http://blogs.technet.com/b/heyscriptingguy/archive/2009/08/13/hey-scripting-guy-can-i-query-a-microsoft-access-database-with-a-windows-powershell-script.aspx
Once you have your dataset you can pipe it to
Export-Csv -NoType c:\pathtofile\output.csv

How do you remove a web address from compatibility view option using a script?

How do you remove a web address from compatibility view option in IE using a script or a GPO?
Not seeing any options.
Casey
This topic first appeared in the Spiceworks Community

luckyfromhialeah wrote:
How do you remove a web site from popular list?
If you mean from the Safari menubar item "Popular"
Choose "Show All Bookmarks" from the Bookmark menu in the main menubar, or click the icon for that in Safari's menubar -
The page that opens should show a list of Bookmarks. In the Left column, click the item under Collections named Bookmarks Bar.
In the new view, locate the folder named Popular and click the reveal triagle to the left of its name - it will open and reveal all the items listed in Popular.
Find the one you want to remove, click it once to select it, then press the Delete key on the keyboard.

Display data vertically using sap script

Hi Developers,
Is there any way to display data vertically in a form using sap script?
thanx in advance,
binu

Hi Binu,
It is not possible to rotate text in SAPscript. The usual work-around, provided this is static text and not from a variable, is to scan an image of the text and include it as a graphic.
Regards,
Nick

Sending email using apple script...

I have created a watch folder using apple script that when a file is dropped on it, it automatically opens, formats, and sends out a custom email.
What I don't understand is, how can I include multiple variables in the "content" section (also known as the body section of the email)? I want to put custom type in the content section that says "There is a file awaiting your review." I also would like to choose an email signature from my mail program to use. Third, I would like to include the name of the file that is being sent....
I found that by doing {content:iteminfo} I could get the file name...If I do {content:"There is a file awaiting your review."} I could get the custom type I wanted....
BUT, I can't figure out how to get BOTH of them together in ADDITION to adding a custom email signature...
I know there are some really smart people out there...Any tips?

I can't figure out how to get BOTH of them together
This is just standard AppleScript text concatenation with the &:
... {content: "There is a file awaiting your review: " & iteminfo}
Here you can see I'm concatenating a literal string (enclosed in quotes) and a variable. You can extend this ad infinitum.
As for the signature:
tell theMessage to set message signature to signature "My Sig"
(which assumes you have a signature named 'My Sig'. Adjust as necessary.

Export OSB configuration from eclipse using ant script

I am trying to export an OSB project from eclipse using ant script
I followed the link below http://biemond.blogspot.com/2010/07/osb-11g-ant-deployment-scripts.html
It is using com.bea.alsb.core.ConfigExport to do the export. This export is always set to resource level.
I see it generates a file ExportInfo setting some properties. It has a property that set the export level as below
<imp:property name="projectLevelExport" value="false"/>*
How can I export the project in project level? basically setting projectLevelExport to true?
So that if a file does not exist in the sbconfig.jar file , then while importing the jar to OSB server it will delete the file from the server instead of skipping it?
I appreciate any help
here is the ant script snippet that gets executed to export from eclipse
<target name="exportFromWorkspace">
     <delete failonerror="false" includeemptydirs="true"
dir="${metadata.dir}"/>
               
<java dir="${eclipse.home}"
jar="${eclipse.home}/plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar"
fork="true" failonerror="true" maxmemory="768m">
<jvmarg line="-XX:MaxPermSize=256m"/>
<arg line="-data ${workspace.dir}"/>
<arg line="-application com.bea.alsb.core.ConfigExport"/>
<arg line="-configProject ${config.project}"/>
<arg line="-configJar ${config.jar}"/>
<arg line="-configSubProjects ${config.subprojects}"/>
          <arg line="-exportLevel true"/>
<arg line="-includeDependencies ${config.includeDependencies}"/>
<sysproperty key="weblogic.home" value="${weblogic.home}"/>
<sysproperty key="osb.home" value="${osb.home}"/>
<sysproperty key="osgi.bundlefile.limit" value="500"/>
<sysproperty key="harvester.home" value="${osb.home}/harvester"/>
<sysproperty key="osgi.nl" value="en_US"/>
<sysproperty key="sun.lang.ClassLoader.allowArraySyntax" value="true"/>
</java>
</target>

yes, I specified the project name to export the whole project.
Here is few lines from my properties file
# properties for workspace export
config.project="OSB Configuration-GW"
config.jar=D:/workspace/osb/scripts/gateway/mycode2/ant_osb/dist/sbconfig.jar
config.subprojects="GatewaySecurity"
config.includeDependencies=true
workspace.dir=D:/workspace/osb/gateway-workspace
But this property does not make it to export at project level ,it export the specified project at resource level.
And while importing this jar to OSB server, if a file is missing it skips the file instead of deleting the file from the OSB server
If I unjar sbconfig.jar file, open ExportInfo file and update the line in bold below to true then it deletes the file from OSB server, if not exist in sbconfig.jar
<imp:property name="exporttime" value="Thu Dec 29 13:57:44 EST 2011"/>
<imp:property name="productname" value="Oracle Service Bus"/>
<imp:property name="productversion" value="11.1.1.4"/>
*<imp:property name="projectLevelExport" value="false"/>*
Here is few lines from Oracle API java doc
http://docs.oracle.com/cd/E13171_01/alsb/docs26/javadoc/com/bea/wli/sb/management/importexport/ALSBImportOperation.Operation.html
public static final ALSBImportOperation.Operation Delete
Indicates that the resource is deleted in the importing domain. This is the default operation when the project is exported in its entirety and the resource exists in the target domain but not in the jar file
public static final ALSBImportOperation.Operation Skip
Indicates that the resource is skipped meaning the resource is not touched in the importing domain. This is the default operation if the jar file was exported at the resource level, and a resource that exists in the target domain, does not exist in the jar file.

How to get latest added file from a folder using apple script

Hi..
I am trying to get a latest added file from a folder..and for this i have below script
tell application "Finder"
    set latestFile to item 1 of (sort (get files of (path to downloads folder)) by creation date) as alias
    set fileName to latestFile's name
end tell
By using this i am not able to get latest file because for some files the creation date is some older date so is there any way to get latest file based on "Date Added" column of a folder.

If you don't mind using GUI Scripting (you must enable access for assistive devices in the Accessibility System Preference pane), the following script should give you a reference to the last item added to any folder. Admittedly not the most elegant solution, but it works, at least under OS X 10.8.2.
set theFolder to choose folder
tell application "Finder"
    activate
    set theFolderWindow to container window of theFolder
    set alreadyOpen to exists theFolderWindow
    tell theFolderWindow
        open
        set theInitialView to current view
        set current view to icon view
    end tell
end tell
tell application "System Events" to tell process "Finder"
    -- Arrange by None:
    set theInitialArrangement to name of menu item 1 of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
    keystroke "0" using {control down, command down}
    -- Sort by Date Added:
    set theInitialSortingOrder to name of menu item 1 of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
    keystroke "4" using {control down, option down, command down}
    -- Get the name of the last item:
    set theItemName to name of image 1 of UI element 1 of last scroll area of splitter group 1 of (window 1 whose subrole is "AXStandardWindow")
    -- Restore the initial settings:
    click menu item theInitialSortingOrder of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1
    click menu item theInitialArrangement of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1
end tell
tell application "Finder"
    set current view of theFolderWindow to theInitialView -- restore the initial view
    if not alreadyOpen then close theFolderWindow
    set theLastItem to item theItemName of theFolder
end tell
theLastItem
Message was edited by: Pierre L.

Problem-Report generation using shell script

Hi
We have the Production database and the Reporting database (copy of Production database),
both on Oracle 9.2.0.5 and Solaris 5.8. There is a package inside the Oracle database, which extracts some data from inside the
database, and would generate a report. A shell script has been created in Solaris which would
send in the parameters and call the pakage to generate the report. The parameters it is sending is
the name of report to be generated, and the location where it is to be generated, both hard-coded into
the script. The script is scheduled to run through crontab.
The problem we are facing is that, if we run the script for Reporting database, it successfully
generates the report. But if we use that script for Production database, it gives the error
"Invalid directory Path". I have tried using various other directory paths, even '/tmp'
and '/', but it still gives the same error when executed for Production dataabse.
Could somebody provide any ideas what might be going wrong.
The reasons it is to be executed on Prod db and not the Reporting database are unavoidable.
It anyway runs in off business hours and takes about 10secs to execute.
Please do let me know if there is any other info that I missed to provide here.
Thanks in advance...

I will be just guessing because you didn't provide contents of script and package.
The "Invalid directory path" as you said could be ORA-29280 due non existent directory.
Try execute (as sys or system) select * from dba_directories; (or select * from all_directories; as user which the script is login to) on both databases and compare the results. If there is missing your important directory then create it using create directory <dirname>; (from sqlplus and don't forget to grant rights for user).
This error could come from shell script. In that case you should find resolution yourself because you didn't provide script source.

Payment Transfer Prinitng using Z-script

Similar Messages

Maybe you are looking for