Pb G4 titanium 1ghz 15" - 802.11g upgrade?

is there a way to upgrade to a 802.11g wifi connection from 802.11b which is currently the classic airport card?

I purchased a Sonnet Aria Extreme card (802.11g) a bit over a week ago. It's much faster than the original (802.11b) AirPort card. The range is not always as great but it's adequate for my use. Speed decreases when the signal is weaker, but never slower than the original card. I purchased it based upon reading this forum. I only wish I'd done it sooner. One of the pleasant surprises was that I did not have to remove my original AirPort card in order to use it. The instructions for the MacWireless cards indicate that you need to remove the AirPort card but the Sonnet instructions indicate that the card overrides the AirPort card.
PowerBook G4 Mac OS X (10.4)

Similar Messages

Can 802.11g upgrade to 802.11n

i have an older airport basestation (domed top) plus two airport express units that operate on 802.11g.
can they be upgraded to work with my newer 802.11n equipment?

Sorry, but no. Complete internal hardware changes would need to be made to the older Express device....which is not possible.

Step-by-step guide to upgrading a MacBook Core Duo from 802.11g to 802.11n.

Hardmac.com has post a step-by-step guide on how to upgrading a MacBook Core Duo from 802.11g to 802.11n using an 802.11n card from the Mac Pro desktop. The upgrade was also tested and confirmed to work with the AirPort Extreme 802.11n at 802.11n speed.
There is no reason that a similar upgrade shouldn't also work with the MacBook Pro.
http://www.hardmac.com/articles/71/

Hardmac.com has post a step-by-step guide on how to
upgrading a MacBook Core Duo from 802.11g to 802.11n
using an 802.11n card from the Mac Pro desktop. The
upgrade was also tested and confirmed to work with
the AirPort Extreme 802.11n at 802.11n speed.
There is no reason that a similar upgrade shouldn't
also work with the MacBook Pro.
http://www.hardmac.com/articles/71/
Gino,
Interesting how the Apple 802.11n Enabler installed on the MacBook with no problems using the CD that comes with the AirPort Express.
I must try that.
Thanks for the post!
William

Upgrade Portege A100 Wireless to 802.11g??

Hi,
Does anyone know if it is possible to upgrade the internal wireless chip in a Portege A100 to support 802.11g??
Cheers
G

Hi again
This must be some series produced just for UK. The best way to find out is to visit http://uk.computers.toshiba-europe.com site. Under Products > Options and Accessories > Wireless communication you can find Wireless LAN Mini PCI Card - 802.11b/g (PA3300U-1MPC). This one should be compatible with Protg A100 P-M.
With a few mouse clicks you can find the answer alone. ;)

Upgrading From 802.11g To 802.11n.

I have an Intel 24" iMac which I understand is compatible with wi-fi standard 802.11n. I have paid £1.25 and downloaded the 802.11n update from Apple.
However, my router is a Netgear DG834G which, I understand, is only compatible with 802.11g.
Would I notice any benefit if I upgraded my router to a Netgear DG834N or is there a better alternative?

I think (and stand to be corrected) that upgrading your router and Mac to be 802.11n compatible would make very little difference to your experience with the internet or downloading from the web.
Where it would (theoretically) make a difference is if your wireless network between your equipment at home were all 802.11n compatible then transfer speeds between those (again theoretically) would be quicker (for e.g. Mac-to-Mac or, Mac-to-AppleTV over a wireless network)
Luke (please someone correct me if I'm wrong!)

Time to upgrade to 802.11g???

Any views would be appreciated - I'm running a 802.11b wireless router with an iMac and PB connected. Basically, is it worth investing in 802.11g (AirPort Extreme Base Station)?
Thanks

There are so many factors to consider when creating a wireless network. 802.11b advertised throughput is 11mbps and 802.11g is 54mbps. But the actual throughput for these is typically 4-7mbps and 22-27mbps respectively.
With security encryption like WPA, there is additional overhead that lowers throughput.
Other important things to consider/remember is that the radio in the AEBS handles one data packet per user at a time. So, if you and a friend were both downloading a file, the radio is not simultaneously sending the two of you data; it sends packets to each of you one at a time. The more users using your wireless connection, the slower it will seem.
Finally, it all comes down to Internet link you have. How much bandwidth does your ISP provide? Your ISP may support less bandwidth than the AEBS is capable of, therefore making the ISP your limitation.
Sorry - no clear answer. I have an AEBS (802.11g) and it's nice...if that helps.
Various Macs and PC's Mac OS X (10.4)
Various Macs and PC's Mac OS X (10.4)

Airport Extreme 802.11n and WDS with 802.11g express

I have an 802.11n Airport Extreme that I have been using with my AppleTV. I have it set to allow for 802.11b/g, since I have an old Powerbook Titanium that cannot be upgraded.
I recently decided to add my Airport Express 802.11g to the mix to act as a bridge for a remote, wired computer. I did this by enabling WDS on the Extreme/Express.
My question is this: by enabling WDS on the extreme, will the AppleTV still be able to connect at 802.11n speeds, or does it get pulled back to 11g? Is there any way to verify/check this on either the Extreme or the AppleTV?
Thanks,
keith

You can check the connection speed of each wireless client attached to a base station using Airport Utility. Launch Airport Utility, click on the Airport button in the toolbar. On the Summary tab you'll see an item called Wireless clients. It shows you how many wireless client devices are connected to that base station.
Click on the words Wireless Clients and you'll get a graph and a list. The graph shows the signal strength of each client. The list shows the client's wireless MAC, the signal and noise levels and the rate at which each device is communicating. On my Extreme-n base stations, I regularly see rates from 1 to 130 and everything inbetween. It looks like each device runs at it's best rate based on signal strength and error rate.
Assuming you know the MAC of your Apple TV (it's on the serial number label) you can see what wireless data rate it's getting this way.
The thing I've noticed is that my Extreme-g base stations seem to connect to clients at higher average rates than my Extreme-n units. In other words, on the g units I'll see more clients at 54 (the max) or 48 and on the n units just a couple will connect at 130 or 54 but most are at lower rates like 27 or 11 (even 2 or 1), even when they are in the same room as the base station.
I find that very odd and would like to understand it. Anybody have any ideas?

Airport Drives Me CRAZY! New 802.11n Network Slower Than Old 802.11g/b

I've been using Macs since 1988 and consider myself an advanced user. However, every time I setup a new Airport wireless network or re-configure an existing one, I feel like a helpless newbie trying to figure out how to open a folder on my desktop. No matter how many times I read the manual or the help files or these forums, I can never grasp what seems like it should be a simple path from A to B to C.
Anyway, here's my current situation: I've been successfully (I think) running a 6 year old AP Extreme Base Station [AE] (in my home office addition) and 2 Airport Expresses [AX] (one AX roughly 15 feet from the base station--through sheetrock, and the second AX roughly 30 feet from the first AX--through sheetrock and some wooden stairs. (so roughly 45 feet from AE to 2nd AX). It wasn't the speediest thing going but it did the trick with older Macs.
I recently bought a MacBook Pro which supports 802.11n. I most often use this laptop at the point in the house furthest away from the AE (Base Station) The AE (Base Station) is in my home office connected to my MacPro desktop (see #1 below). In addition, the family iMac is also in that room furthest from the AE. Using the new MacBook Pro with the old 802.11/g/b network turned out to be painfully slow. I was experiencing the same slow network connection my family has complained about for years with their older Macs and 802.11g/b.
I decided it was time to upgrade the whole network, if only to speed up my MacBook Pro connection. Bought new 802.11n Airport Extreme (MC340LL/A) and 2 new 802.11n Airport Expresses (MB321LL/A). Setup did not go smoothly. Again, my normally competent Mac persona was reduced to a babbling three-year-old. Had three different Apple techs on the phone trying to help me through it. Got different, contradictory instructions from the last two. Finally got all three units working, only to find that not only does my MacBook Pro seem even more sluggish than when connected to the old 802.11g/b network, but my wife tells me web pages are taking at least twice as long to load as with the old network.
As concisely as I can lay this out:
*1. Airport Extreme (Base Station)*
Connected via Ethernet from its WAN port to my Comcast cable modem. One Ethernet (LAN) port on that AE is then connected via Ethernet to my Netgear 8-port Ethernet switch. Ethernet from switch to Ethernet port 1 on my MacPro. (MacPro does NOT have an Airport card because I forgot to order one. Also I confirmed that this setup was functional by connecting to the AE wirelessly with my MacBook Pro showing the name I'd given the new network prior to adding the two AX's to the mix).
Some Airport Extreme settings of note (all accessed via "Manual Setup" button):
Airport Tab > Summary
Version 7.5.1
Wireless Mode: Create a wireless network
Channel: 149 (Automatic), 1 (Automatic)
Wireless Clients: 3
Airport Tab > Base Station:
Allow Setup over WAN: Unchecked
Airport Tab > Wireless:
Allow this network to be extended: Checked
Airport Tab > Guest Network:
Nothing checked
Airport Tab > Access Control:
MAC Address Access Control: Not Enabled
Internet Tab > Internet Connection:
Connect Using: Ethernet
Ethernet WAN Port: Automatic (Default)
Connection Sharing: Share a public IP address [Think this one is probably wrong]
Internet Tab > TCP/IP:
Configure IPv4: Using DHCP
Internet Tab > DHCP:
Shows Beginning & Ending Address
Internet Tab > NAT:
Enable default host at: Unchecked and blank field
Enable NAT Port Mapping Protocol: Checked
Internet Tab > Advanced
Didn't touch anything here, so all at defaults
*2. Airport Express #1: Living Room Express (Closest to AE (Base Station)*
Airport Tab > Summary
Version 7.4.2
Wireless Mode: Extend a wireless network
Connect using: Wireless Network
Channel: 1 (Automatic)
Wireless Clients: 1
Airport Tab > Base Station:
Allow Setup over the Internet using Bonjour: Unchecked
Airport Tab > Wireless:
Wireless Mode: Extend a wireless network
Allow wireless clients: checked
Airport Tab > Access Control:
MAC Address Access Control: Not Enabled
Internet Tab > Internet Connection:
Connect using: Greyed-out, not selectable
Connection sharing: Greyed-out, not selectable
Internet Tab > TCP/IP:
Configure IPv4: Using DHCP
Shows IP Address
Internet Tab > Advanced
Didn't touch anything here, so all at defaults
*3. Airport Express #2: Dining Room Express (Furthest from AE (Base Station)*
Airport Tab > Summary
Version 7.4.2
Wireless Mode: Extend a wireless network
Connect using: Wireless Network
Channel: 1 (Automatic)
Wireless Clients: 2
Airport Tab > Base Station:
Allow Setup over the Internet using Bonjour: Unchecked
Airport Tab > Wireless:
Wireless Mode: Extend a wireless network
Allow wireless clients: checked
Airport Tab > Access Control:
MAC Address Access Control: Not Enabled
Internet Tab > Internet Connection:
Connect using: Greyed-out, not selectable
Connection sharing: Greyed-out, not selectable
Internet Tab > TCP/IP:
Configure IPv4: Using DHCP
Shows IP Address
Internet Tab > Advanced
Didn't touch anything here, so all at defaults
SETUP/GOALS:
With Airport Extreme (Base Station) as the starting point, have the two Airport Express units with the strongest, fastest signal possible, provide Internet access (and file sharing, iTunes speakers capability) to three Macs (one older iMac, one older PowerBook and my new MacBookPro). Again, I believe my new MacBook Pro is the only one with 802.11n support, so I don't expect the other Macs to take advantage of the speed boost offered by the three new 802.11n devices.
+Any and all help with this will be greatly appreciated. Thanks!+

{quote}With the AirPort Extreme, in the AirPort panel, Wireless tab, click on the button for "Wireless Network Options", check the box for "5 GHz Network Name", and enter a different network name. (That can be trivially different, such as the name of the main network suffixed with an underscore and the digit 5.) Once configured that way, connect your "N" gear to each network in turn to see if one is any better than the other. (If you're wondering what effect this would have, it allows segregating your "N" gear from the older gear to prevent the older gear from slowing down your network. However, distance and interference from things like walls may negate any advantage.){quote}
William: I was gone most of yesterday, but had a chance to implement your recommendations today. I added the 5 GHz network as you suggested, but in order to connect to that at all with my 802.n11 MacBokk Pro, I need to be within a few feet of the AE (base station). If I try to access that network even from the next room (well within reach of both the AE and the livingroom AX, I get one bar and "failure to connect" messages just trying to logon to that network.
However, I did some experimenting that (as of right now, anyway) resulted in much faster network access, not only from my MacBook, but also from the older iMac which is the furthest Mac from the AE. According to my wife, that iMac is "loading web pages faster than I've ever seen them!"
Here's what I did:
1. Moved all three units to places where it seemed they would have the least amount of interference with the clearest path from unit to unit, also raising the height of both AXs from about 2-3 feet from the floor to about 5-6 feet from the floor.
2. Changed one setting on the AE (base station): Wireless Tab > Wireless Network Options > Multicast Rate ---> Changed this from Low to High.
I have a feeling the location shifts made the real difference, but I will try changing the multicast rate back to "Low" just to see what happens.
Paul

How's playback from external hard drives and 802.11g?

I'm thinking about putting my movies on an external Firewire hard drive connected to my iMac Intel Core 2 Duo.
Does it make a difference in playback jumpiness if any with:
1. The movies on an external Firewire hard drive connected to my Mac?
2. The movies on an external USB 2 hard drive connected to my Mac?
3. 802.11g shared network with one other computer and internet connection.
4. 802.11g adhoc network and second 802.11g network for internet on other machines in the neighborhood?
5. 802.11n adhoc network with 802.11n upgraded machine and a second 802.11g network for internet with other machines in the neighborhood?
6. Must the video play on the AppleTV hard drive to stream to the TV, or can video that is not on the AppleTV be played back?
7. Unrelated question, but do TV shows show menus which are alphabetical with submenus which are also alphabetical?
Please only people who have already received their AppleTV let me know what you find.

what if I want all my movies and shows and music served from my HD but my photos to reside on the ATV...is that possible!?It is what I am doing. Basically, I simply set the main iTunes host to sync all music (115 files) and all photos (928), but nothing else. When I want to look at the photos (with music), I merely switch to the "TV" (sync) mode. When I want to stream any of the movies, TV Shows, and/or Podcasts, I just switch to the Named Music Library (streaming) mode for the same iTunes host.

IOS6 and Appletv 5.1 wifi working as 802.11g instead 802.11n

Both upgrades are making my devices to operate as 802.11g instead 802.11n, at my home wifi connections.
The devices which I haven't updated are still working as 802.11n.
This could be another issue in the new upgrades. I hope that a possible iOS6.0.1 fix that up!
Thanks everyone
Chris

Is anyone having the same problem?

Configuring WDS w/ Airport Extreme Dual-Band 802.11n & Express 802.11g

I currently have an Airport Extreme Dual-Band 802.11n Model: A1301 (located downstairs) and an older Airport Express 802.11g Model: A1084 (located upstairs) which I had been using to stream iTunes to my upstairs stereo (which worked flawlessly). Recently a friend of mine recommended that I reconfigure my network to a Wireless Distribution System setup which would allow me to create a remote wireless node which improves my wireless signal strength upstairs, allows an interface to Airplay to play our music from our iPod's/Pad's and also provides an hard-wired Ethernet connection for my newly delivered Network Extender for my cell phone. So I followed the URL: support.apple.com/kb/HT4262 to assist in this conversion and found that I was unable to configure my network as desired. While this documentation is very good, there is one snafu that I worked out that finally allowed a successful setup. Follow the instructions for:
- Connecting a WDS main base station to the Internet
- Configuring a WDS main base station
- Configuring a WDS remote base station (See last line of instructions for the correct WDS Main ID)
Ensure all Wi-Fi base stations are powered on and allow them time to appear in the AirPort Menu Extra.
From the AirPort Menu Extra, select an 802.11g Wi-Fi base station to configure as a WDS remote.
In AirPort Utility, select the WDS remote Wi-Fi base station in the Base Station Chooser, and click Manual Setup.
Select the AirPort icon from the Toolbar, and click on the Wireless tab.
From Wireless Mode select Participate in a WDS network.
Click on the WDS tab.
From WDS Mode, select WDS remote.
Enable Allow wireless clients (see the first note below).
If not already supplied, enter the 2.4Ghz AirPort ID of the WDS main, then click Update.
There are two Apple ID's for the dual-band Extreme (2.4 & 5.0Ghz). Be sure to use the 2.4Ghz ID which is listed under the "Summary Tab" of the utility. What is confusing is that in the AirPort Utility, when you position the mouse cursor over the graphic of the Extreme on the left-hand side of the GUI, you are presented with a yellow dialog box which displays the 5Ghz ID and this can be misleading especially when you are trying to connect to an older 2.4Ghz Express ...

My Express is the A1264 802.11n model. My Extreme is the A1354 model.
The most crucial issue is the the Tivo, because the Premiere only works with Ethernet (I dont' have and wont' buy the upgraded wireless doohickey), but of course I would prefer that the Express also act to extend the signal, and I particularly want it do so using WEP access (or nothing, see below), since I have a second Tivo which ONLY works wirelessly and which ONLY works using WEP, not WPA.
Since there were so many different issues and needs going on, I was excited about the Dual Band because it meant I could potentially get 5G speeds for my iPad and perhaps the Tivo Premiere connection, while allowing a completely separate band for the OLD Tivo.
The other option I've been trying out (to accommodate the Tivo2 that can't handle WEP) is having no security, but making the networks hidden.
A third option I tried to make work was to create a "guest network" for just the Tivo2.
But what I'm finding out (it's what I always struggle with...networking is a nightmare.) is that if you take one from Column A, Column B disappears, so to speak.
The way it used to work on the non-dual band Extreme was as I mapped above, and the Tivo2 and my iPad used the wireless signal with no problem while the Express was Ethernet connected to the TivoPremiere, but it did so using WDS, which doesn't even seem to exist as a possibility, forget teh fact that it undermines the speed boost (so I read)
I've frankly never been able to understand the differences between the various modes and structures, and believe it or not I'm very smart and very comfortable with computers and Macs, having worked on them for 25 years.
And one of the biggest reasons I've had such a hard time is because of the many times that I have updated after making changes, Airport Utility tells me it worked, but nothing happens and then after too much frustration I end up unplugging and shutting down every single piece of equipment and rebooting everything and then it DOES work. Sometimes. But I can't be doing that every time I make one tweak, I'll go insane!
And the number of pin-resets I've done on the Express, the Dual band, and even the cable modem would make your head spin!
So there's my story. Kinda. Does it make any sense? At least in terms of my goals?
Your help is more appreciated than you can imagine.

Airport Extreme 802.11n upgrade options for early Intel Core Duo iMac

I have an iMac from mid 2006. I recently purchased a Timecapsule - partly for the wireless back ups, and partly to upgrade my wireless network to 802.11n. There is a software upgrade from Apple that upgrades older 802.11 a/b/g Airport cards in the iMac to 'n' standard. Here is the link:
http://store.apple.com/uk/product/D4141ZM/A?fnode=MTY1NDA0Mg&mco=MjIzMDkzNA
The page states that the upgrade is compatible "If you have a Mac with an Intel Core 2 Duo processor (except the 17-inch, 1.83GHz iMac)". What it doesn't tell you is that if you have an early version of the iMac (pre-Sept 2006) that shipped with the Intel Core Duo Processor (note - not the Core 2 Duo) then the upgrade will not work. I have also tried to install Airport Extreme updates (2007002 and 2008004) and these report that the hardware is not compatible. Doing some searching around these forums and others, the issue with the original Core Duo iMacs not being upgradeable to 802.11n is out there - shame Apple weren't more explicit.
I have seen that there are various USB based 802.11n adapters available. Whilst searching on this topic, I also came across a site offering various Mac upgrades, including an upgrade to the Airport card to upgrade wireless capability from 802.11g to 802.11n. It looks like a straight replacement for the internal card - link here:
http://www.macupgrades.co.uk/store/productinfo.php?productsid=461
The company offering this is in the UK, but the product appears to be from a Sonnet, a US company. Does anyone out there have experience of installing this product (or having it installed) and can you comment on how it performs? Is it a seamless replacement for the original Airport card?

What it doesn't tell you is that if you have an early version of the iMac (pre-Sept 2006) that shipped with the Intel Core Duo Processor (note - not the Core 2 Duo) then the upgrade will not work.
If it says you need to have a Core "2" Duo processor, then it seems to me they are telling you very clearly that it will not work with the earlier Core (no "2") Duo iMacs.
The "late 2006" iMacs with Core 2 Duo (except for that one education model they mentioned) have wireless networking hardware that is 802.11n capable. When they were initially sold, Apple chose to NOT enable the "n" capability for some reason; maybe because the standard was still in flux and not enough testing had been done with the driver. Later, they enabled the "n" capability with a firmware update. But that was only possible because the wireless hardware was already capable of doing "n."
Earlier iMacs do not have this hardware so there is no way to enable it with a firmware or software update. 802.11g is plenty fast enough for Internet access (you won't notice a difference with "n"). If you are using Time Machine over wireless, it may take a while longer to do that initial backup (you could connected it by Ethernet cable when it is doing that initial backup), but subsequent backups are incremental, so the "g" versus "n" speed difference will not be as critical. Since your iMac is Core Duo (32-bit) and the future of Mac OS X is 64-bit, especially after Snow Leopard's release, it may be best to save your money and keep your iMac intact (not opened).

MSI RG300N WLAN-N ROUTER 802.11G+N

Hello,
I'm looking for a Wlan router and come across this MSI RG300N.
It's the cheapest N router around here in the Netherlands, but i can't find much info about the device. ???
what i found:
supports 802.11b, 802.11g and 802.11n
1x RJ-45 (10/100Mbps) WAN poort
4x RJ-45 (10/100Mbps) LAN poorten
3x Antenne
4Mb Flash mem.
16Mb Dram
SPI Firewall
VPN Passthrough
WEP 128-bit, WPA, WPA-PSK, WPA2-PSK
Does anybody have some more info or user experience?
for example how much power does it use? (the eminent em4550 for example only use 5 watts)

Quote from: hjs on 05-February-09, 15:48:54
The specs says the firmware is upgradable, but where can i find new firmware versions ?
(the number of firmware updates says something about the support for the product, more is better )
Where is the firmware download?
Has anyone looked at the hardware? Is this router an Atheros ar9132 with ar9103 radio? If so, exciting news! MSI may have produced a high quality version of the Atheros AP81 platform routers.
If this router is ar9132 + ar9103, it is possible to run OpenWRT Linux on this router. it would be able to use the Linux ath9k open wireless driver and have a bright future. You can see more information at: http://www.google.com/search?hl=en&q=site%3Aforum.openwrt.org+ap81&btnG=Google+Search&aq=f&oq=

802.11g versus 802.11b/g - Which Should I Use?"

Hi, quick question. What is the difference? Which setting should I use for my home network? Does it matter? I am using a Netgear router with 2 Macs and 2 PC's. Thanks
d

But why is that? It's most annoying. Apple (and others) promote this wild and wonderful 802.11g and how much faster it is...Great! I'll go shell out another x-hundred dollars and upgrade, only to find out that where the old wireless b could get a solid and stable connection to my PB EVERWHERE in my home (and next door at the neighbours place) I can't even get a stable connection in my bedroom not even 20ft. away from the router. I'm thinking I should have stayed with wireless b in the first place. Or am I just way off base and just have a defective wireless g card in my PB?.
Sorry about the rant, but I had to vent.
Mac OS X (10.4.8)

Can you disable 802.11g and 802.11a on an Airport Card?

Does anyone know if there is a way to disable 802.11a and 802.11g functionality on a MacBook Airport card? I have a very old 802.11b access point and the airport card seems to be making it fail. I was hoping that by turning off 802.11g or potentially adjusting some other airport parameters I might be able to keep the AP from crashing. I'm hoping to keep the AP I have because it has an integrated print server which has been great. If there is no way to modify the settings on the airport card, I guess I'll need to upgrade my AP.
Thanks.
Macbook Mac OS X (10.4.8)

Well, I should have used the advice I give to everyone else. Even though my wireless router is very old, there was a firmware upgrade for it. Even though the release notes for the firmware said nothing about it fixing a problem with a MacBook, I upgraded to the latest firmware. After a week or so of testing, it seems to have resolved the problem with the AP going dead when the MacBook was using it.

Pb G4 titanium 1ghz 15" - 802.11g upgrade?

Similar Messages

Maybe you are looking for