Pbm in Value mapping

Hi,
scenario is IDOC -> File
I am getting sales org(VKORG) in source idoc and this have to be comverted into Country code(VKORG) in target side.
IR:
In the mapping of theVKORG field, Value mapping function is used and I have defined Context :http://sap.com/xi/XI ,Agency: XXX Schema: YYYY
ID:
I have created Value mapping by going to tools->value mapping and maintained the list of values in table with group id:ZZZ
My pbm is If i give the payload in message mapping and test it.. then the value mapping is working fine..(ie,In Target side,sales org is getting converted to country code in VKORG field.)
but if i trigger an idoc with sales org in field VKORG, output file is getting created but sales org is not getting converted to CountryCode.
What is the problem and How to resolve this..??
Thanks
Kiruthi

> My pbm is If i give the payload in message mapping and test it.. then the value mapping is working fine..(ie,In Target side,sales org is getting converted to country code in VKORG field.)
Do you mean when your are testing it under Test Tab in message mapping by using the payload values then it is working? If you ans is yes then you are getting wrong result because value mapping works only at run time. Secondly if value is not maintained in value mapping table then it returns the same value to target field.
>
> but if i trigger an idoc with sales org in field VKORG, output file is getting created but sales org is not getting converted to CountryCode.
You can make sure if it is working or not under RWB. Go to RWB -->Cache Monitoring and the enter your agency & schema and then give the source value and see if it returns the correct result or not.
Also check again if you have maintained the correct agency & schemaa in MM.
Also try to refresh the cache because most of the time it happens because of cache problem.
Regards,
Sarvesh

Similar Messages

Import conversion data table from SAP R/3 into value mapping table in XI

Hi:
    Somebody knows how to import a table with conversion data that are in SAP R/3 and to take it to a value mapping table in XI?
    The purpose is to use a mapping table that can change in the future. Must I use a ABAP programming that retrieve data and build the value mapping table?
    If so, how I specify in the ABAP programming the group id, the scheme, the agency and the corresponding value?
    Please, help me.
    Regards!!!

Hi David,
please refer to this section in the help: http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
There is an interface for mass replication of mapping data. The steps you need to carry out to use this are:
+Activities
To implement a value-mapping replication scenario, proceed as follows:
       1.      Register the Java (inbound) proxies.
To do so, call the following URLs in the following order in your Internet browser:
¡        http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication (for the asynchronous replication scenario)
¡ http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous (for the synchronous replication scenario)
You only need to perform this step once (for each installation).
       2.      Application programming
The ABAP program must perform the following tasks:
¡        Read the value mapping data from the external table
¡        Call the outbound proxy used to transfer the data to a message, which is then sent to the Integration Server
       3.      Configuration of the replication scenario in the Integration Directory
This involves creating all the configuration objects you need to execute the scenario successfully. One special aspect of the value-mapping replication scenario is that the receiver is predefined (it must be on the Integration Server). The sender, however, is not predefined in the replication scenario and can be defined to meet your individual requirements.
For example, you can use the shipped ABAP proxies.
In the case of the receiver communication channel, choose the adapter type XI. Ensure that you configure a channel for the Java proxy receiver in this case.
Enter the path prefix /MessagingSystem/receive/JPR/XI for this purpose.
+
Regards
Christine

Partial match for Value Mapping in Import Manager

Hello Experts,
We have a import map which is used to do mass insert of data into the main table. This is done as & when required by the end user.
We have a qualified lookup field which has a flat lookup filed as the Non-Qualifier. This flat lookup field is refering to a Lookup Flat table, which has mulitple dispay fields like Code,Name, Status etc. (14 fields in total) where as only the Code is the unique field.
We have only the unique field in our source file which we use for the import. Since we have only a part of the display fields in the source, the automap functionality in the Value maping section doesn't work. It becomes very tedious for the user to manually map all the values for this field.
Is there any way by which we can convert the source or target values in the import map, so that we can map the values using the Automap feature?
Your help & suggestion for alternate approach is highly appreciated.
Thanks in advance.
Regards,
Uday
P.S. We are using SAP MDM 5.5 SP6.

Hi Uday,
No need to enable remote key mapping for QLT. Please execute the below steps(stated with an example) -
1. Among all the fields in the referenced lookup table, identify the lookup fields and the tables they are looking up .
For eg.If you have a lookup field as 'Country' as one of the fields, look up table will be 'Countries'
2.For the identified lookup tables, set 'key mapping =Yes' in Console.
For eg, For Country Lookup table ,set Key mapping to 'Yes'
3.Import values into Lookup table (Import manager)/ Remote key update -
In import manager, select source (local file) and destination as Countries flat table.This Table will be haing 2fields - Code and description.Clone the 'Code'field and map it to Remote key field in destination hierarchy.Map code and description to equivalent destination fields. Select 'Code' as matching field > Perform import into lookup table.
Check if the records in countries table are updated with remote keys(in Data manager> right click on a record> select 'Edit key mappings' > view key mapping for the record)
3.Import to Qualified table/Auto value mapping -
Now, in the import map for qualified import , map the source field and destination field (of lookup type), all the values of this field will automatically map.
Similarly, refresh remote keys mappings for all the lookup tables first and then you can see auto mappings of values happening for the lookup fields.
Regards,
Vinay M.S

Value Mapping Insert Error

Hi
I am sendind an item value mapping from R3 to XI and I get this error:
<ns:ValueMappingReplicationFault xmlns:ns="http://sap.com/xi/XI/System">
- <standard>
<faultText>A value is missing for content of Identifier in item 0.</faultText>
- <faultDetail>
<text />
<id>7</id>
</faultDetail>
</standard>
- <addition>
<ItemNr>0</ItemNr>
- <Item>
<Operation>Insert</Operation>
<GroupID>037dd9b01a3111da8abef522ac127968</GroupID>
<Context>http://sap.com/xi/XI</Context>
<Identifier scheme="BS_PEPE" agency="Company" />
</Item>
</addition>
</ns:ValueMappingReplicationFault>
The code in R3 is this one
REPORT Z_XI_REPLICATE_VALUE_MAPPING.
data: My_ZCO_MI_CONSULTA_SERIAL type ref to
                CO_SVMR_VALUE_MAPPING_REP_SYNC,
      in type SVMR_VALUE_MAPPING_REP_RESP,
      out type SVMR_VALUE_MAPPING_REPLICATION,
      vIdentifier type SVMR_VALUE_MAPPING_IDENTIFIER,
      vItem type SVMR_VALUE_MAPPING_REP_ITEM,
      vItemLst type SVMR_VALUE_MAPPING_REP_TAB,
      vList type SVMR_VALUE_MAPPING_REP_LIST,
      lo_sys_exception   TYPE REF TO cx_ai_system_fault.
try.
    create object My_ZCO_MI_CONSULTA_SERIAL.
    vIdentifier-scheme = 'BS_PEPE'.
    vIdentifier-agency = 'Company'.
    vIdentifier-value = '122'.
    vItem-Group_id = '037dd9b01a3111da8abef522ac127968'.
    vItem-operation = 'Insert'.
    vItem-context = 'http://sap.com/xi/XI'.
    vItem-Identifier = vIdentifier.
    append vItem to vItemLst.
    vList-item = vItemLst.
    out-VALUE_MAPPING_REPLICATION = vList.
    call method My_ZCO_MI_CONSULTA_SERIAL->EXECUTE_SYNCHRONOUS
      EXPORTING
        output = out
      IMPORTING
        input = in.
CATCH cx_ai_system_fault INTO lo_sys_exception.
    write: /'Error Text   --> ',lo_sys_exception->errortext.
    write: /'Error Code   --> ',lo_sys_exception->code.
    exit.
ENDTRY.
write: /'ESN_STATUS --> ',in-STATUS.
The message sent to XI and I see in the sxmb_moni in R3 is this one
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:ValueMappingReplication xmlns:nr1="http://sap.com/xi/XI/System">
- <Item>
<Operation>Insert</Operation>
<GroupID>037dd9b01a3111da8abef522ac127968</GroupID>
<Context>http://sap.com/xi/XI</Context>
<Identifier scheme="BS_PEPE" agency="Company">122</Identifier>
</Item>
</nr1:ValueMappingReplication>
When I try to delete a Group it works but not when I want to insert an individual item.
What am I doing wrong?
Thanks
Regards

Hi
There is a field call CONTROLLER with this structure:
FIELD     FIELDNAME     CHAR     30     0     Field Name
VALUE     PRX_CONTR     CHAR     1     0     Field Control in XML Data Stream (=> Type Group SAI)
But in SAP documentacion does not say any references to this field and how to fill them.
I am asbolute sure I filled all the mandatory fields.
Thanks
Regards

Value Mapping in Import Manager

Hi All,
I have Probelm while loading data to MAIN TABLE through Import manager,I am getting XML file from Legacy System in which legacy sends State Code like NM (for New Mexico) .In my region table I made Name and Code as display field .Created my Import map ,when ever new value comes for region value mapping is not working ,I tried changing my region table with code only display field it works ,but I want Name also display field .
Note : all my lookup table Remote key mapping Enabled
Is there any way we can acheive this or am I missing some thing here .
Thanks,
Madhu

Hi Madhu,
to achive this:
1. First go to the table where you are maintaining the region codes.
2. Enter the region code there and then go to the import manager by connecting to the source file.
3. go the region field map by opening the map.
4. go to value mapping pane and select unmap.
5. then select Automap and check the that your region code added manually is mapped with the source file.
6. You may see some unmapped source values, map it to Null values at destination.
7. Save the map.
8. This shoul enable the import for you.
if you want to avoid the manual mapping everytime, you should be getting all the region codes once and import/update it in the data manager as a one time job.
Then you avoid steps 1 to 3 everytime and carry out the remaining steps to import the records.
Hope this helps resolve the issue.
Thanks
Rahul

Mapping multiple source value to one target value in value mapping

Hello experts,
In my scenario, i need to map more than one source value to one target value in value mapping. Like:
1        TenderPickup
2        TenderLoan
7        TenderPickup
101     TenderPickup
102     TenderLoan
107     TenderPickup
But when I enter the same target value for the second time and try to save it, it gives me an error saying value mapping already exists.
But this should logically be allowed. How can this be done. Please provide a solution.
Thanks,
Yash

Hi Prabhu,
When i right click on the target field, it gives me only 3 options:
1) Insert Row
2) Delete Value Mapping
3) Value Mapping in all agencies
I dont see nay option for duplicating rows.
What I hae done is in ID i clicked on TOOLS and then VALUE MAPPING. I checked the option "Value Mapping Agencies" and gave my source and target agencies detials. Then i clicked on DISPLY and in the next page I have 3 columns - Value for <source agency>, Value for <target agency> and Group name.
When I give duplicate values in the column Vlaue for <target agency>, it doesnt allow me to and if i right click in this column, i get the above mentioend options.
Please point out where i m going wrong.
Thanks,
Yash

How to read Group ID from Value Mapping Context in Cache Monitoring ?

Hi friends,
    In RWB --> Cache Monitoring --> Integration Server (Java) -> (Search for Value Mapping Groups) in this each item is identified by Value Mapping Group (GroupID, Context, Identifier/Agency, Identifier/Scheme). Either we create Value Mapping Table in ID or replicate value mapping data directly from text file/SAP table etc., in run time cache, data will be identified in this manner.
    Now, our requirement is to delete a record the Cache for a particular context. Two operations provided by XI one is 'Delete' and another one is 'DeleteGroup'. When we use either of this, we should know GroupID. Suppose, I replicated some large amount of data from my text file in Runtime Cache. Value Mapping Table is like that IN --> India, US --> USA, AU --> Australia, EG --> Egypt. Now, I am required to write a program to get the input country code from user which is going to delete in the value mapping table like IN/AU.... For this, what logic we should follow in the program is, First we scan the value mapping table and find the record (country code) which is match with the input. Then find the GUID value for this record. Now we use the DeleteGroup Operation and pass this GUID and then delete the record.
    So, in essence, how to read the GUID from value mapping context.
    Friends, Kindly help me to do this.
Thanks in advance.
Jegatheeswaran P.

Did you get the way to read group id?

Value Mapping through Tables in R/3 from XI

Hi All,
I'm new to XI and got a scenario as "Value Mapping through Tables in R/3 from XI". Kindly do tell me the steps which I should follow to complete this scenario. I'm from ABAP so table creation is known to me, what next should I do after table creation?
Thanks in Advance to all of you,
Sreedhar

sree,
value mapping are done using message mapping. In message mapping you have to make a RFC call to query the db and get the response. were you have to write a java function in mapping program.
check this blog, it speaks on value mapping
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i

Value mapping in xslt mapping

Hi,
I have 2 mapping program one is main .xsl program and other one is value mapping program .xsl .
I have zipped both the program and imported into Imported archive in IR but while testing in interface mapping i am getting error.
error:could not compile xslt stylsheet.
Some of the interface having one .xsl program and value mapping is also defined in the main program itself,these interface i am able to execute successfully but unable to execute wherever there are 2 program (main prog + value mapping).
It seems that value mapping is not loading / executing.
Can anyone please guide me how to call value mapping using xslt mapping?
Thanks,
Subbu

Hi Prateek,
Thanks for the response.
Yes i have 2 program and both needs to execute in one interface mapping.
First program (main) is MappingMOAPS_SAVEMULTIPLE2013.xsl and second program i.e (value mapping) MO_vmf.xsl.
From main program itself value mapping program is called.
Please look below code for main & value mapping prog.
In main prog this is the parameter (<xsl:import href="MO_vmf.xslt"/>) where value mapping prog name is mentioned.
I have already zipped and imported but while testing in interface mapping it is giving error that "could not compile xslt stylsheet".
Could you plaese tell how to check or make XSL to accommodate multiple mappings?
Main mapping : MappingMOAPS_SAVEMULTIPLE2013.xsl --
<?xml version="1.0" encoding="UTF-8"?>

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:vmf="http://www.altova.com/MapForce/UDF/vmf" exclude-result-prefixes="vmf xs xsi xsl">
     <xsl:import href="MO_vmf.xslt"/>
     <xsl:output method="xml" encoding="UTF-8" indent="yes"/>
     <xsl:template match="/PPR">
          <MOAPS_SAVEMULTIPLE201>
               <IDOC>
                    <EDI_DC40>
                         <xsl:for-each select="SI_ID_IDOCS">
                              <xsl:for-each select="ID_TABNAM">
                                   <TABNAM>
                                        <xsl:value-of select="."/>
                                   </TABNAM>
                              </xsl:for-each>
                         </xsl:for-each>
                         <xsl:for-each select="SI_SP_SAP_PARTNER_INFO">
                              <xsl:for-each select="SP_MANDT">
                                   <MANDT>
                                        <xsl:value-of select="."/>
                                   </MANDT>
                              </xsl:for-each>
                         </xsl:for-each>
                         <xsl:for-each select="SI_ID_IDOCS">
                              <xsl:for-each select="ID_DIRECT">
Value mapping : MO_vmf.xsl:
<?xml version="1.0" encoding="UTF-8"?>

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:vmf="http://www.altova.com/MapForce/UDF/vmf" xmlns:xs="http://www.w3.org/2001/XMLSchema" exclude-result-prefixes="xs xsi xsl">
     <xsl:template name="vmf:inputtoresult">
          <xsl:param name="input"/>
          <xsl:choose>
               <xsl:when test="$input='01'">
                    <xsl:value-of select="'PM1C'"/>
               </xsl:when>
               <xsl:when test="$input='02'">
                    <xsl:value-of select="'PM2C'"/>
               </xsl:when>
               <xsl:when test="$input='03'">
                    <xsl:value-of select="'EXT3'"/>
               </xsl:when>
Regards,
Subbu

Value Mapping Group in PI 7.1

Hi All,
In PI 7.1 Integration Directory there is one section as "Value Mapping Group".I suppose that it is used if and only if value mapping is used.But I am not using any kind of value mapping so can I skip that section?
Thanks in advance.

Hi Abhishek,
THanks for the reply.
I have another query. it is as follows:
Actually I am having the Process Order coming in the source with 5 to 6 relevant fields.Out of these Process Order fields Status is one of the fields.Based on the the StatuS field the BAPIs will be called at the receiver.So can I skip Integrated Configurations as I am imposing the condition on the data in the payload(Source Structure) as Integrated configuration will not be helpful in my scenerio.?
Or shall I skip Sender Agreement ,Receiver Agreement?
Thanks in advance.

XSLT Value Mapping Problem

Hello,
we want to use the value mapping table in ID with XSLT.
Here is my source:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Source xmlns:ns0="http://comsol-ag.com/xi/rfcxslt">
    <CustomerNumber>A</CustomerNumber>
</ns0:Source>
XSLT Mapping:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:trg="http://comsol-ag.com/xi/rfcxslt" xmlns:ns0="http://test/xi/tsts" xmlns:ValueMap="java:com.sap.aii.mapping.value.api.XIVMService">
    <xsl:template match="/">
        <trg:Target>
            <CustomerInfo>
                <xsl:variable name="sourceValue" select="ns0:Source/CustomerNumber"/>
                <ID>
                    <xsl:value-of select="$sourceValue"/>
                </ID>
                    <xsl:variable name="response" select="ValueMap:executeMapping('http://sap.com/XI/xi','SourceAgency','SourceScheme',string($sourceValue),'http://sap.com/XI/xi','TargetAgency','TargetSchema')"/>
                <Name>
                <xsl:value-of select="$response"/>
                </Name>
            </CustomerInfo>
        </trg:Target>
    </xsl:template>
</xsl:stylesheet>
Target:
<?xml version="1.0" encoding="utf-8" ?>
<trg:Target xmlns:trg="http://comsol-ag.com/xi/rfcxslt">
<CustomerInfo>
<ID>A</ID>
<Name /> ???????????????????????????????????
</CustomerInfo>
</trg:Target>
But the receiving data is not converted to value table in ID:
Integration Directory Value Table :
http://www.image-load.eu/out.php/i26896_pic1.PNG
Please point out where i m going wrong.
Thanks

problem solved!

Value Mapping in PI 7.1

Hi All,
Please tell me about value mapping.I have never worked on value mapping earlier.Please give me the steps to do value mapping.
Thanks in advance.

Hi Shweta
Please see me answers below,
1.Can we do the value mapping in Graphical Mapping?Is there any standard function available for that?If so what is it?
Your question is not clear but I will answer both ways.
If you are talking about create Value Mapping from the Integration Directory. Answer is yes. You can create value mapping groups there.
If you are talking about using Value Mapping in the graphical tool. Answer is yes. You will only see results in runtime (up to PI 7.0). In PI 7.1 you can see results during development time, after some configurations.
2.Do we need to maintain any value mapping table in ID?If so then where and how to create it?Where actually do we need to mention it?
You can do it either in ID or you can upload your values into Cache via Value Mapping Replication. (Let's say in a massive way).
In ID just create a new Value Mapping Group. That will create the values in Cache.
In IR, in your mapping, use a ValueMapping object (found under Convertion Functions) and fill it in with the values used to create the object in the ID.
I also have a document step by step for Value Mapping Replication if you want to.
Good Luck.
Luismier.
Thanks in advance.

Value Mapping in PI 7.0

Hi All,
I need to implement the value mapping.
The mapping rule for the value mapping is for varius z tables like
ztable1
ztable2
ztable3
ztable4
ztable5
ztable6
ztable7
Can you please help me in implementing the value mapping ?
Can you please tell me the steps to umplement it?
Thanks in advance

How can I come to know about the Agency and Schema to implement the Value Mapping?
Check the blog # 5479
From the blog:
Enter Value Mapping Properties such as Agency, Schema for Source and Target messages. Any arbitrary string value can be
used. But enter the Value Mapping Context as http://sap.com/xi/XI
I am not getting which Value Mapping should be done for my mapping requirement,but I thibk it should be for the fixed value,but dont know whether I need to implement the Valume Mapping replication or not?
If you give more details about your requirement then somebody may help you out on the approach.
Regards,
Abhishek.

N: 1 relationships in Value Mapping 3.0

Hi,
in our Value Mapping we need to process n:1 relationships between values. E.g. 2 different codes for reason-for-rejection in the sending system need to be mapped to 1 value in the receiving system.
As we see now, and this is also mentioned somewhere in this forum, this doesn't work. Is this correct?
As suggested in this forum one option would be to add the sending value in the receiving value and use mapping to trim the value. So e.g.
Agency: SystemX                    Agency: SystemY
Scheme: Augru                      Scheme: Augru
Value                              Value
A1                                 B
A2                                 B
would become
A1                                 A1_B
A2                                 A2_B
Of course, this would work, but just one-way (from SystemX to SystemY). From SystemY to SystemX this would not work, since only value B is available at that time. If you apply the same logic, so implement another value, this would eventually mean:
Agency: SystemX                    Agency: SystemY
Scheme: Augru                      Scheme: Augru
Value                              Value
A1                                 A1_B
A2                                 A2_B
C_A1                               C_B
D_A2                               D_B
So you end up with a lot of values to maintain.
Another option would be to use different Value Mapping scheme's, but this would influence the reusability of the mapping.
Any suggestions?
Thanks a lot!

When you have an n:1 mapping and want to use this in both directions, you need a logic, how the values are determined, if you have several entries to choose.
In your example:
A1 -> B
A2 -> B
If you come from the other side, what value should B have?
For the default value you could use a unique prefix (eg: 1_) and add that prefix to the value before calling the value mapping.
Let us assume, you have maintained the table like this:
A1 -> 1_B
A2 -> 2_B
A3 -> 1_C
A4 -> 1_D
A5 -> 2_D
A6 -> 3_D
so you have B ->A1, C -> A3, D -> A4
Regards
Stefan

Value Mapping in BPM

We are using Value Mapping in XI 3.0 in the integration builder under the configuration.
Value Mapping is not working during the transformation step in BPM. See help.sap.com under transformation step: http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Does anybody have a solution for executing the value mapping in this case.
Thanks in advance,
Glenn van Kamperdijk

Dear Stefan,
What if you do want to use value mapping in a ccBPM? What values should be entered at:
Source Values For Agency?
and
Target Values For Agency?
Best regards,
Roelof Jan

Pbm in Value mapping

Similar Messages

Maybe you are looking for