PC has Connectivity issue, I am going to tell every one about poor performing HP notebook PC

PC does not connect well; all my devices do except for pc.  The worst I ever experienced; I always thought good of HP.  Very disappointed with HP, as this is a known connectivity issue.  I had for 3 mon. previously called & was rushed a box to ship for repair, but not that is not enough.   I bought pc for wrk and I cannot be without. I am very frustarted, because the connectivity issue such a nuisance & inconvenience. I am considering contacting BBB, Attorney General , Facebook. HP should do bttr. I expected more from a big, so called reputable manufacturer. I should not have to be without a pc. I bought it to make a living.  This is rediculous.  I understand mstakes happen, but be accoutable, as I only want a fair resolution.
Frustrated Customer.

Hi   Rachel
   Sorry to hear your having connection issues with your machine , Can you tell me exactly what the problem is and any ( If any ) error messages you receive regarding your connection issue.
                  Kind Regards 
                      Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Similar Messages

  • Store loads but Shopping Card has connection issue

    iTunes stores loads and I can browse and add songs to my cart, but I am unable to access the cart due to a connection reset. *** is goin on?

    It seems like something is wrong with your connection. It would mean that your connection to the apple iTunes server has been dropped, try contacting your ISP about this issue.

  • How can I make my 3G take over when my wi-fi has connectivity issues?

    My wi-fi usually works fine but every so often it starts to work very slowly and usually not at all. How can I make it where I always stay connected to the wi-fi for the speed and convenience, but then my phone switches over to 3G connection when it can't receive data via it? I have an iPhone 4S so I've been having trouble making this work.

    You can turn off WiFi from the pull-up menu on the bottom (swipe up from bottom of device and click on the WiFi symbol to turn it off).
    You can see link for more advice:
    http://support.apple.com/kb/TS1398

  • S-L-O-O-O-W!!!! Has this issue been resolved? Spinning Beachball every time I change anything!

    Hi all - I have the latest version of Dreamweaver CC 2014 (6733 Build). It is frustratingly slow. I searched and found a lot of discussions on this, tried some recommendations, but have not found a resolution to this problem - and I need to get this working ASAP because I am spending way too much time waiting and waiting and waiting. I even started a new site, with only one html page. Something as simple as applying an h1 tag and then changing the text attributes: Color - wait, wait, wait (spinning beachball), wait, wait . . . changed. Then change size -  wait, wait, wait (spinning beachball), wait, wait . . . changed. Change Font - wait, wait, wait (spinning beachball), wait, wait . . . changed. I am sure you get the point. This is a totally unacceptable way to work! The same thing is happening on both my desktop computer and my laptop. Any advice would really be appreciated.

    FOLLOW UP: I must say that Adobe Support handled this issue extremely well - thank you Preran and Sonam for you assistance! They tried to contact me the day after my post, but I wasn't available - we set up an appointment for today and she called right on time. We did troubleshooting for about an hour and discovered that it was a font issue. I use a font utility that had some kind of conflict with my system fonts. Once it was resolved, Dreamweaver is quite speedy now. My advice for anyone having this issue would be to turn off all non-system fonts and see if that helps. Keep up the great work and support Adobe . . . this user absolutely appreciates it!

  • Connectivity issues with RE1000

    A year ago, I purchased E4200 and RE1000. I installed both devices and "enjoyed the ride".
    Two weeks ago, I noticed that my wireless Windows 8 laptop started having connectivity issues.
    I've read a few postings about RE1000 problems and followed them.
    I've updated E4200 and RE1000 products, but my problems got worse.
    On the Linksys E4200, I've changed MTU size from 1500 to 1400. It did not get better.
    I've re-installed RE1000, but my network connectivity issues got worse.

    Best to install the tool on whichever computer you usually use to configure your settings with. But you can actually install it on both. It should come in handy if you need to address wireless issues.

  • Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up

    Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up with it for months, until june 7 when I decided it has been long enough, and I got a replacement. I told the genius bar what happened, and I already did the so called "steps" that apple reccommended on the site, which was reset network settings, restore iPhone. The genius bar gave me a replacement phone, so I was expecting that the problem would be over, but it isn't. It seems that it's iOS 6.1.3 which is the case of most public complaints on apple iPhone products. Not even 3 weeks after I got the phone replaced, it is doing it again, so I suspect I'm just going to get a replacement again? Unfortunately I only have until 5th of july 2013 until my 1 year warranty is up. After that, any issue I have, I have to purchase apple care. People are expecting this problem to be fixed but I don't see it being solved any time soon. This is horrible and really low, because I have been a good customer, when I talk to the people at the genius bar, I show the utmost respect I can to them for the work they put into their job, but somewhere there is a problem where something has gone wrong. Because of that, people that only have a one year warranty (which i received because I purchased my apple iPhone at an Optus outlet, once that one year warranty is up, I have to pay for a problem that isn't even my fault? That isn't how it should work, you should be fixing this problem so people can be happy customers and leave happy. Obviously you don't all know how to do your jobs, because if you did, we wouldn't have this problem. I would like a replacement phone, ONCE AGAIN. If this problem occurs again, I will simply stop buying your products, and lose faith in your company, your's sincerely, Jack Maher.

    This is a user to user help forum only. You are not addressing Apple here.
    My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

  • My MacBook Air has recently started having substantial WiFi connectivity issues. How do I fix this?

    For the last couple weeks my MacBook Air has started having some mighty substantial connectivity issues.
    When I wake it from sleep, or if I'm using it for an extended period (say, more than 5-10 minutes), the connection will become extremely unreliable. This primarily happens with browsers, or the Twitter application. For example, if I start a call on Skype the call will continue to function just fine, but I won't be able to connect to any websites through any browser. I've tried Safari, Chrome, and Firefox while the connectivity problems are occuring. When they do occur, a full shut down and cold boot are required to make it work again for a short while.
    Does anyone know what might be causing this? I've done numerous checks for malware using Clam Xav and Sophos Anti-Virus. (I didn't suspect that this would be the issue, but it was still something that I decided to rule out.) Additionally, I've tried connecting using both the 2.4GHz and 5GHz bands on my wireless router. Neither seems to be more successful than the other. (Note: The 5GHz works perfectly and without interruption on my iPad and desktop PC. The 2.4GHz works perfectly with my iPhone 4S and Xbox 360. I feel that with that in mind, I can safely rule out the router as the root of the problem. Both of these examples go on for very extended periods of time. I game regularly using both my PC and Xbox 360.)

    Hi Jollified,
    Does your sound work when you try to use head/earphones? If so, try the following:
    Plug your Headphones into your Mac.
    Play a sound through them (a song for example), then stop the sound.
    Make sure 'Preferences' is isn't open. If it is, Quit.
    Launch System Preferences > Sounds.
    While the Sounds tab is open and set to 'Headphones', pull out the Headphones from the jack.
    You should see your Mac reset to 'Internal Speakers'
    Also, I see you have tried resetting the PRAM, have you tried resetting the System Management Controller (SMC)? Resetting the System Management Controller (SMC) on your Mac - Apple Support
    As for your MacBook not sleeping when you close the lid, there are many reasons this can occur.
    First of all, check out Apples article on the issue: OS X Yosemite: If your Mac won’t go to or stay in sleep If you find these steps don't help, try a few of the following:
    A common cause for the Mac not sleeping is your printer. If there are queued jobs waiting to be printed, but your printer is switched off, for some reason you Mac just wont like it and simply will not go to sleep. System Preferences > Print and Scan > Open Print Queue
    Do you have an Ethernet Cable connected? People have reported in the past that removing their Ethernet allowed their Mac to sleep. This goes for other things you may have connected directly to your Mac also.
    Try heading into your Mac Preferences > Sharing and deselecting 'Internet Sharing' as well as 'Printer Sharing'.
    Also deselect Wake For Network Access by heading to System Preferences > Energy Saver > Power Adapter > Wake For Network Access.
    Energy Saver > Schedule > Startup or Wake - Uncheck.
    Alternatively, set your system preferences to Never Sleep, and put into Sleep manually: System Preferences > Energy Saver > Computer Sleep > Never.
    Good luck!

  • BT Infinity Connection Issue (On Going)

    Hi, i've been having problems with my connection over the past 2 weeks and since it seems that none of the people i talk to have any idea what's going on, i thought that i would post my issue on here and see if any one can help. I will try to keep this post up to date with any developments, and i will try to respond promptly to any questions. 
    For a brief summery, see Short story. For more detail, see Long story.
    Any thoughts, ideas or sympathies would be apprechiated.
    Thanks
    //First post, please be gentle
    =================
    ===Short story===
    =================
    -25th of January: Infinity installed.
    -7th of March: Speed drops significantly and connection become unstable.
    -8th of March: Problem reported to BT.
    -13th of March (Morning): Engineer visits, finds no problem with the line, changes both the router and the modem. No change.
    -13th of March(Afternoon): BT calls to claim that the problem is resolved. No change.
    -14th of March: Connection on router starts to drop out every 2 hours, but green DSL light on modem remains lit.
    -15th of March: Sencond engineer visit, clueless as to nature or cause of problem. Changes router and modem. Performs lift and shift. No Change.
    -16th of March: Connection now drops out every 3-5 minutes.
    -17th of March: Issue reported as a fault, engineer visit scheduled for the 20th to perform "triage". Optimism: Low.
    -18th of March: Very sad student can't play games or do Uni work. =[
    -19th of March: Will probably have to go back to Uni over spring break to work. =O
    ================
    ===Long Story===
    ================
    On the 25th of January i had BT Infinity installed and was amazed when my download speed shot up to 38MB (from 5), and my upload was a staggering 9 MB (from 0.7). As a gamer, this was at the time fantastic.
    However, on Wensday the 7th of March, i came home from Uni to find that my friend's voices on Skype sound all distorted. I decide to do a speed test, which reveals that the speed had dropped down to 3MB download, but the upload was still 8MB. I thought that this was a glitch, so i ran the BT Speedtester and restarted the router and modem etc. No change. Over the next few days, the speed fluxuated between 0-7MB down and 5-8MB up.
    Naturally, i contacted BT, who after some convincing, booked an appointment for an Openreach engineer to come over on Tuesday the 13th. The engineer who turned up tested the line and after finding nothing wrong, changed both the router and the modem twice. As baffeled as me, the engineer told me to contact BT again as he was convinced it was something on their end. After 2 hours on the phone (an hour and a half of that on hold), i was told the problem was resolved and all i had to do was restart my router and modem.
    I did so gladly, only to find no change in the speed, and another complication. After the problem was "fixed" my HH3 would lose connection every 2 hours, but now, it loses conneciton every 3-5 minutes, 24/7.
    However, the Modem doesn't. It's only the broadband light on the HH3 that changes, the green DSL light on the modem stays on. After another lenghty conversation (thank god i dont have to play for these calls) the guy in India was certian it was a line issue, and dispatched another engineer on Thursday the 15th.
    The second engineer, who i knew as he was a frind of my father, told me that he had been sent out on a "boost job", whatever that means. Basically, he told me that if he isnt supposed to leave until the problem is resolved. So, after 3 hours of changing routers and banging our heads against the wall with BT, he got them to do a lift and shift.
    No change.
    Completely stumped and at 6 pm (2 hours after the engineer was supposed to finish work) i let him go home, since there was clearly nothing he could do.
    After another 2 hours on the phone with BT, i now have my own number that i can call BT on that connects me to a manager who has "taken over" the problem. He has dispatched another engineer for Tuesday to 20th to do "triage testing". Mean while, i can't do any work for Uni at home, play any games or even browse the internet.

    Sorry, that was hilarious. I pressed the reply button and the page came up saying that my router had lost connection.
    Anyway,
    The speed tests i did with the BT Speedtester told me about the rediculas low speeds, but it didn't ask me do do anything further. However, the Speedtester hasn't worked for me since Friday e.g.
    "Test Error
    The Performance Tester is currently unable to run a speed test for your broadband connection. Please try again shortly, however if this problem persists, raise the issue with your service provider."
    What is a tap3 test? This is the first time i've heard of this.
    I have not tried bypassing the Home Hub either. I've been a good boy and only done what BT has told me to.
    Do you think that it could help?

  • TS1398 Has anyone had WiFi connectivity issues with their iPhone 5 after accepting the latest IOS 8.0.2?

    Has anyone had WiFi connectivity issues at home with their iPhone 5 after accepting the recent IOS 8.0.2 update?

    Yes, despite being it an iPhone5 (8.0.2) attempting to connect to an Airport Express.
    In my case the iPhone "connects" to Airport Express 2nd generation, but no Internet packages are available; Airport Utility shows the Airport Express as not connected to the Internet; but the iMac, MBP, Motorola phone, Samsung Smart TV and HP printer connect without any trouble.
    The actual issue is the DHCP :
    sometimes the iPhone gets none, and
    when an address is assigned it just doesn't work,
    even renewing the address won't work all the times,
    switching off and on the WiFi won't work all the times neither,
    going on Airplane mode, then back won't work all the times.
    Solutions attempted and failed:
    Reseting and reconfiguring Airport Express;
    Reseting iPhone;
    Switching off and on the iPhone;
    Setup the DHCP renewal for every 5 days;
    Meditation and stark visualisation;
    Other possible patch not yet attempted : setting fixed IP addresses
    All suggestions received resemble Windows' "Plug & Pray"
    I gave up after reading several notes around the WWW complaining about it.
    Last credible suggestion : wait for 8.0.3 or 8.1, whichever fixes the issue first.

  • My iphone 4s and ipad 2 both with 7.0.4 update will no longer connect to wifi but non-mac lap top has no issues

    my iphone 4s and ipad2 both with 7.0.4 update will no longer connect to wifi.
    About three days ago the ability to connect came and went and the connection never lasted more than 10-15 minutes; it has not been able to connect since last night. I do not think it's my wifi router as non-mac lap top has no issues. I have seem many similar questions posted.

    Reboot your router by removing all power from it for about 15 seconds. Also, if your router still has its default SSID (such as LINKSYS, DLINK, NETGEAR, etc) change the SSID to something unique. Note that all other devices on your network will have to be reconnected if you change the name, but if the name is still the default that is most likely your problem.
    If the SSID is not the default then the reboot should fix it.

  • HP PhotoSmart 7510 suddenly has severe connectivity issues

    I have a HP PhotoSmart 7510 printer since about 2 months. Initial setup worked like a charm and the printer has been working pretty much perfectly for the last 2 months. Wireless printing, scanning and internet access on the printer (e.g. for Facebook photos) all worked. Just from time to time i would get the occasional (mildly annoying) message on my computer saying "scan to computer is currently unavailable" but it usually worked itself out and whenever I needed it to work, it did work.
    But since a few days ago, it has some severe connectivity issues. I didn't change any settings on the printer, router or computer - the issues just started appearing by themselves. I startet getting much more frequent messages on my computer saying "scan to computer is currently unavailable". I noticed I couldn't print anymore, and restarting computer, printer and/or router didn't help at all. The only thing so far i managed to print wirelessly since the problems started were the first 5 pixel rows of an image I tried to print, the rest didn't transmit.
    It seems the printer still connects to the WLAN but printing and scanning no longer work, and whenever I try to access a web service on the printer (like Facebook) it says it has no internet connection, even though the WLAN light is lit up (not blinking) and all the wireless status reports say "congratulations, no problems found" and display IPs etc. just like normal.
    I looked at the threads "PhotoSmart 7510 connects to router, but not to the web.", "Wireless printer (HP Photosmart 7510) not connecting to network" and "Photosmart 7510 won't connect to Web Services" but they weren't a big help. Activating EWS didn't work because even though the printer showed its IP address to be 192.168.1.3, when I entered this in my web browser it didn't find the printers configuration page.
    I tried the following steps from one of the threads:
    1. Restore the Network defaults
    2. Unplug the printers power cord while it is still on. Leave it unplugged and walk to the router.
    3. While the router is still on, unplug the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once plugged back in the router should power on automatically.
    4. Plug the power cord back into the printer. Once plugged back in the printer should power on automatically.
    5. Run the Wireless Setup Wizard to reconnect the printer to your wireless network.
    6. Try enabling Web Services.
    I followed these steps exactly. Interestingly, even though I had done step 1 and restored the network settings to factory defaults, after turning back on, the printer somehow still had its old settings saved and reconnected to the network.
    It seemed to have fixed the problem, the printer finally had internet access again (Facebook app showed my photos) and scan to computer found my PC. But after just about 3 minutes, the printer had lost its internet connectivity again. When opening the Facebook app, it displayed the same error message it did before. And printing no longer worked as well.
    So, what is wrong with this printer?! It has the newest software update by the way (I checked during the 3 minutes it had internet access.) My computer is a HP Windows 7 x64 machine (EliteBook 6930p) and the router I'm using is a Netgear WNDR3700.
    I specifically bought this printer for my studies at university. In one week i have my exams and in order to study I REALLY need to be able to print some of my course materials! So any help as quickly as possible would be greatly appreciated. Or do you think this is a case for a warranty replacement, considering the printer's really strange and error-prone behavior?
    Thanks a lot!

    I can assure you that it is not a router issue.  It appears to me that it is a driver compatibility with Windows OS.  After trying to get to the bottom of this since my Photosmart 7525 was new and reading just about every forum and blog, I have come to the conclusion that the issue must be related to the HP driver itself.  
    The issue does not seem to affect any Mac systems, and from one forum someone was able to fix it by downloading new drivers compatible with 64-bit systems (which seem to not be affected by the glitch).  But that leaves us 32-bit people stuck with the current driver which does not work.
    The printer is connected with good signal to the wireless router (no matter who's router it is and what configuration is made).  The printer can be pinged from the router and any computer on the network which is not currently being affected by this issue.  However, the affected computer fails pings by either request timed out, or destination host unreachable.  Pings are successful from the affected computer to any other device on the network.  The only way to recover (at least for a few days) is to reboot the affected computer.
    Also, from the display on the 7525, the network tests pass without issue.  I can also download and print content from the internet with no issues.  
    Please do a quick google search of this issue and you will see several THOUSAND entries of people with the same request.  This is a serious issue that people are having and everything is pointing to an HP problem (not routers, improper installation of software or drivers, etc...).  I agree with several other customers that HP should be on the hook for this fix.  I will give it another couple weeks, then back to the store for a reliable unit from another competitor (Canon, Lexmark, etc..)
    Thank you in advance for escalating this issue to product engineering,
    S. Hunn
    There are 10 kinds of people in this world... Those who understand binary and those who do not.

  • Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

    I installed OS X Lion v10.7.3 because of the following claim.
    The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
    Resolve a Wi-Fi connection issue when waking from sleep
    It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
    Does anyone have a suggestion for the resolution to this problem?

    It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
    Here are some things to try.
    1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
    Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
    2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
    3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
    You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

  • Two Macbooks, same spec, yet one has major connectivity issues

    Hi,
    I have two (old - 2006) macbooks, bought at exactly the same time, exactly the same spec, probably off the same factory line. Yet one has serious Airport issues which are proving very difficult.
    It will pick up a maximum of one wireless network, which it barely is able to connect to. There are 3 wireless networks in this house yet it only picks up the nearest one. The other macbook can pick up at least 15 other networks despite being exactly the same spec and on the desk next to it.
    Even when it connects to my network, connections are frequently dropped - over 50% packet loss generally.
    Both are running the same OS and are exactly the same spec. I have tried resetting the PRAM, deleting the airport prefs, resetting the SMC; you name it I've tried it. I noticed that this is quite a common issue with Snow Leopard + Airport, but I am now thinking it could be a faulty Airport card. Could this be the case?

    You already mentioned that you thought that "it could be a faulty AirPort card". I agreed and offered another possibility as well.
    Whether or not you are using Snow Leopard, if you have a faulty wireless card or a faulty antenna connector, you will most certainly have major connectivity issues.
    You've already performed all the standard troubleshooting steps and mentioned that you felt it may be a hardware issue.
    If you have changed your mind and feel that it's a Snow Leopard issue, (logic would dictate that it would have also affected your other identical computer the same way) you have the option of reinstalling the operating system to see if that might help.

  • My PC can connect to the airport extreme but with encryption it cannot connect to the internet my iMac has no issues, any help.

    My PC can connect to the new airport extreme I just purchased but with encryption it cannot connect to the internet my iMac has no issues.  If I open the airport exteme up and provide no security everything is fine which leads me to believe it is something with the encryption between the two devices.  Not sure what step I'm missing here this shouldn't be this difficult.

    Sorry, I should have been more clear. I am asking if the DNS IP addresses, not the IP addresses assigned by the DHCP service, are the same. DNS is like the Internet's version of the Yellow Pages. Your ISP typically will provide them to you or you can elect to use those provided by another source, like OpenDNS.
    DNS is the service that translates a website's URL to its actual IP address so that you can access it. I am just trying to rule out that the PC is not configured properly with the correct DNS IP information.
    The other thing to check is if the PC is configured to use a Proxy service. By default, it would not be.
    Finally, what is the make & model of the PC. More importantly, if the PC is using either a PCI or USB wireless adapter, what is its make & model?

  • Since HTC is going to start unlocking thier phones and Verizon has no issue with that

    Since HTC is going to start unlocking thier phones and Verizon has no issue with that
    those who have unlocked their phones should have no issues with warranty unless they alter the OEM Rom or install a different rom
    Most people want to root to get rid of all the bloatware
    So we are back to why not let us remove what we want and put this to rest....
    Behold, the Power of the Android Community: HTC to Unlock Future
    Bootloaders
    [Updated: Yes There Will Be] Verizon: There Won’t Be Any Unlocked Devices On Our Network

    budone wrote:
    I think VZW has no issue (if that is actually true) is because if a phone pukes and it has been rooted, their hands are washed of providing a replacement.
    You hit it right on the head, just because they do not lock down bootloaders still does not change that rooting and installing unarthorized firmware or OS violates TOS and voids warrenty which cleans Verizons hands to replace device if it gets damage while doing any of these things to device.

Maybe you are looking for

  • Review Activity (RA) Approval Condition is Changing

    Hello everyone, I am running SCSM 2012 R2 version 7.5.3079.0 (no CUs).  I am having an odd issue where it seems as though the approval condition is changing on review activities.  I can't seem to figure out if I've done something or if there is somet

  • Transfer to ECC fails in the SCM 7.0 testing system

    We  use only DP and are upgrading from SCM 5.0 to SCM 7.0. The planning book from where we transfer the Demand Plan to to ECC has a time bucket profile set up where it is maintained in months and the display is in weeks. The transfer to ECC happens i

  • XSANE no devices available

    Hi, I used XSANE for scanning for a couple of months, but couple of days ago, it started to tell me that no devices are available. I have HP Photosmart C3180. I added my user to scanner group. I ran sane-find-scanner under my user, gave back no scann

  • How to make DatePicker  readOnly

    Hi There is a tabular form(up datable query) on one of my pages. One of its items is a Datepicker. In some conditions I need to make this field unchangeable by users. I was able to do so by the following Java Script Dynamic action: var elms = documen

  • Qurey - Installation of ECC6.0 ( Oracle10g+Windows Server 2003 )

    Hello Gurus I have an qurey regarding installation of ECC6.0 on Windows Server 2003 ( Oracle 10g) While performing installation at the begining when we run sapinst server logoff at the begining, then we proceed ahead and start the installation. My qu