PC in place of DTU

HI, I am new to sun-ray and trying to learn it by installing SRSS 4 on a server. I want to make some test but I dont have a DTU at the moment. Is it possible to use a PC to emulate a DTU by enabiling boot on LAN.? If so, what configuration change in required on the server side.
Thanks

There is no Sun Ray emulation package. You need a real Sun Ray unit. If you don't want to buy a new Sun Ray 2 model from Sun you should be able to pick up an older version (a Sun Ray 1-something) on Ebay for a few bucks.

Similar Messages

Bug or wrong configuration of the Sun Ray Server+DTU+17" and 24" screenres.

I have 2 DTU, one has a 17" screen with a resolution of 1280x1024 and the other DTU has a 24" screen with a 1900x1200 resolution attached. The setting of the Sun Ray server is configured only that registrated cards, can make an kiosksession to VMware View 4.6.
When I start the DTU's, there is nothing wrong. The correct screen resolution is displayed on the screen for both DTU's. When I put a smart card into the DTU that has a 17" attached, it's indicates the correct resolution. The problem starts when I hotdesk to the other DTU with the 24" attached to, the session what was builded on the 17" will be showed on the 24". So the the resolution is 1280x1024. With this action there's nothing wrong, because the kiosksession is made on the 17" and no disconnection is made, so this is a correct resolution at this point. When I pull the card out of the 24" DTU, the screenresolution will be still at 1280x1024. It's looks like the setting will be saved on the DTU. Only a restart of a DTU will turn back the good resolution.
When I do the same as the case before, but only I start at the DTU with 24" screen the kiosksession will start at 1900x1200. When I hotdesk to the Other DTU the kiosksession is still at 1900x1200, but only this time when I pull out the card out of the 17" DTU, The DTU will give the right screen resolution of 1280x1024
the DTU's are Sun Ray 3 Plus, it doesn't matter which DTU's I place, the problems seems like that the DTU will save the last screen resolution. I got 300 of these DTU's and try a lot of them, but still the same issue.
Note: with each case explained in this thread, the kiosksession will be started at first time, the kiosksession is not builded yet or has been disconnected.
This behaviour is with a standard installation and configuration of Sun Ray server software 5.1.2. No extra script is implemented. Also I tried the UTRESIZE script that I've found on this forum, but it didn't helped.
Is this problem a bug (known issue) or is this a wrong configuration of me? This is a big issue for me

I have also a lot of fun with different screens, so I walk the "hardwired" mostly when I run into my screen does not look like correctly.
utresadm -a -c MAC -t default 1280x1024@60 ... and then this is nailed, whatever you do with this box. Very effective especially for beamers ...
what you can set, utresdef is your friend, utresadm -p show all the devices overwritten in case you need to change for a new monitor. And finally utresadm -d -c MAC -t default clears the setting.
regards, thomas

I am using Adobe Creative cloud enterprise version. I tried to download assets from newly launched Adobe Market place. It is saying that this feature is only available for premium paid customer. So Adobe CC enterprise is paid version. Why is it again aski

Guys, Any idea why I am unable to download assets from Adobe Market Place. I am using Adobe CC enterprise.

Cloud Market http://terrywhite.com/adobe-creative-cloud-market/ may help
-and http://helpx.adobe.com/creative-cloud/help/market.html

HT201272 I purchased songs from iTunes Radio on my iPhone, but now the only place they will show up is in the iTunes Store app on my phone, even after syncing to my computer a million times, the songs do not show up in my library or anywhere else.

I purchased songs from iTunes Radio on my iPhone, but now the only place they will show up is in the iTunes Store app on my phone, even after syncing to my computer a million times, the songs do not show up in my library or anywhere else. My phone is not syncing properly, I wanted to add another playlist to it that I created on my Mac. I pluged in my phone and made sure the playlist I wanted to add was checked to be on my phone when I synced.
The playlist I wanted to add was "Country." It is clearly checked. I also wanted to add the "Recently Added" playlist, which I also checked before sycing. Currently, my phone only has the "Purchased" playlist and my "All Songs" playlist on it. When I hit sync, iTunes added another playlist automatically added another playlist to the list above and checked it. It was titled "ALL SONGS 1" and had ten fewer songs in it than the playlist I had created, "ALL SONGS" had. This playlist, however does not show up on my phone after syncing, nor does "Country" or "Recently Added." (Every time I sync, another playlist is created as "ALL SONGS 2, 3, 4, etc.") One of the songs (I have not, yet checked the other songs) that I purchased from within iTunes Radio shows up in the "ALL SONGS 1" on this screen:
But does not show up anywhere else. This playlist does not show up anywhere but the two screens above. The ALL SONGS 1 or 2 playlists do not show up here:
When I search for those song in my library, it shows that I do not have them:
But if I go to the iTunes store, I get the play button and not the price of the song:
This is what things look like from my phone's side of things:
"Summertime Sadness," one of the songs I bought from iTunes Radio, does not show up in the iTunes store under purchased "All" or "Not on This iPhone"
But, it does show up under "Recent Purchases"
Also, this is what playlists are on my phone after syncing a million times:
Only what was on there before I started any of this. "Summertime Sadness" and the other songs I bought from inside iTunes Radio, do not show up in either of these playlists. Please, help me.

Hi Petrafin,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
You can download your purchases directly to your computer.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Cheers,
- Judy

HT1423 I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

How can I make sure my history doesn't expire and that I can transfer over places.sqlite?

There's probably alot of questions on this subject asked already but I've gone over just about all of the possibly relevant ones that've been already asked and I still can't figure out what to do. I'm trying to move my complete history from an XP Firefox profile over to a Windows 7 profile on another computer. Do I just do it by copying the places.sqlite file within that XP profile over into my USB flash drive, then replacing the places.sqlite in the Winodws 7 profile with the one from the other one? And after the file's in the right profile will I be able to just view all the sites I viewed on the old computer on the new one's history dialog box? I only am transferring my XP history to my Windows 7 because I want to look at stuff several months back and it keeps expiring on me, even to the point of getting rid of a month of history a week or so ago. This brings me to my other point, I keep up fairly well with updating both of my Firefoxes but recently (and I think this was way, way after they updated the browser so the history isn't set to expire by days anymore) the history just isn't reliable anymore. My XP will not only expire older months of history faster and faster it seems, but individual websites at the end of each month will actually disappear as I view new ones, instead of it all staying in there and just expiring each old month as a whole. Also, random sites in every month scattered all over the list of URLs will just disappear, and random sites that I've only visited in the past couple days will insert themselves randomly into much older months of history, which makes it hard to figure out the URLs I've seen, this last one seems like a common problem from what I've read, and all of these problems seem to be slowly creeping into my Windows 7 as well when they were originally on only my XP. The thing is for a very long time my Windows 7 would keep every ounce of my history that I kept on it, unless of course I went through the Clear History process myself. Now it seems to be slowly deleting it and having all the other problems that I mentioned earlier. I've got 592 GB out of 931 GB that's free space on my Windows 7 that I want to transfer my XP history into, and my Control Panel System panel says I've got 8 gbs of RAM in total. If I need to get some other information on RAM mention how to do that if you could. So in total, how can I transfer my XP history over into my Windows 7 so I can view all the sites I viewed on my XP in my Windows 7 history panel, as well as view all the old expired and/or manually deleted history on my Windows 7, without worrying about whether it will expire itself while I'm viewing it and writing down the relevant URLs that I need to know about. If I can only keep all my history through installing an add-on, a link to a relevant legal add-on that'll work well on both operating systems would be appreciated. Thanks to all here. (:

Hello Saethwyr99,
''Do I just do it by copying the places.sqlite file within that XP profile over into my USB flash drive, then replacing the places.sqlite in the Winodws 7 profile with the one from the other one?''
you are correct : [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile#w_your-important-data-and-their-files Your important data and their files]
''Also, random sites in every month scattered all over the list of URLs will just disappear, and random sites that I've only visited in the past couple days will insert themselves randomly into much older months of history, which makes it hard to figure out the URLs I've seen, this last one seems like a common problem from what I've read, and all of these problems seem to be slowly creeping into my Windows 7 as well when they were originally on only my XP.''
from Firefox 4 and above versions there is not a time limit for the history.
Firefox determines automatically how many pages can be kept '''without affecting the performance.'''
''as well as view all the old expired and/or manually deleted history on my Windows 7''
i think this in not possible
''If I can only keep all my history through installing an add-on, a link to a relevant legal add-on that'll work well on both operating systems would be appreciated.''
check the next add-on : [https://addons.mozilla.org/en-us/firefox/addon/expire-history-by-days/ Expire history by days]
thank you

Will I be able to copy my music library from my PC to I pad and listen to it at a remote place without sync and without I tunes match?

Will I b able to copy my music library from PC to I pad while sync and listen to it without sync at a remote place. Is it possible without iTunes Match?

Yes. As long as all your songs you lost have been Matched or Uploaded to iTunes Match you can download your entire library from the cloud.
It might take some time though

Error while updating decimal places in general settings

Hii All
         I have got an error while updating Decimal places in General Settings
Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
Note : there are no postings yet, a fresh database for a new client
         what could be the possible reason
                                                             thanks
                                                                     RIYAZ

Hiii All
      As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
          would be helpfull if there is any other way..
                                            Thanks
                                                     RIYAZ

Can no longer download from some of my 'usual' places, even after the 'update'. WTF?

I've been unable to download ANYTHING from a few of my 'regular' places since I got this %#*@^ 'improved' Firefox. If it wasn't nearly impossible to do, I'd go back to the old one, at least it did ALL the things I use a browser for.
Here's the deal. I go to one of these websites, spy something I need, and try to start a download. Does it happen? NO! Why not? Because said website admonishes me that I already have my limit of downloads in progress! Seems simple enough, you think? Sure, except that I have NO f**king downloads in progress! That never happened with the older Firefox, the one that worked. I've spoken with the webmaster of a couple of the sites involved, and they've made no changes, have no other problems, BUT they advise me that MANY of their users who have this POS 'new' Firefox are having the exact same issue.
I hoped that, once you people issued an 'update' for this spiffy new Firefox4, you'd fix this problem. Surely I'm not the only person cursed with this problem?
Hey, look, if you can't or won't bother to fix this, would you at least have the decency to make it easy to go back to the OLD Firefox that worked reliably?
You can bet I'm making it my business to tell anyone and everyone I can reach that FF4 is a POS, and this is a very good time to find a new browser, like Chrome. Even IE manages to download from the website(s) FF4 no longer d/l's from.
I'd be ashamed, if I was you.
If it matters, mine is a plain vanilla PC, running 64-bit Win7, basic un-tweaked installation. I have the issue noted above whether or not I have any add-on's working. I've made sure to reboot the PC and restart FF4. I've downloaded and installed the alleged 'update', then again rebooted the machine, and still have the same f**king problem, website(s) think I'm already downloading. I never had this problem before I got this spiffy new Firefox4, and if it wasn't such a chore to remove it and go back to a Firefox that WORKED, I would have already done so. Now you've done an 'update', and apparently no one there gives a f**k about this. The websites involved are the same ones I've been d/l'ing from for years, with no problems, and they've made no changes. My PC hasn't been in any way changed, it's entirely the fault of Firefox4. What a POS!

http://kb.mozillazine.org/New_messages_do_not_appear

How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across. However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro. I'm finding that it doesn't run as quickly as it used to.
A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library. Keep all documents, pictures, music etc on the current hard drive.
I would be grateful if someone could help me with:
1) installing OSX on the SSD without copying across data from the current hard drive
2) transferring applications, system and library folders across to the SSD so that they still function
3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
If anyone could help with this, it would be much appreciated.

If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
Clinton

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? Create a personal cloud?

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? To create a personal cloud?
Can someone advise as to whether i can do the following:
                            Future Internet connection -------------------TIME CAPSULE (containing all files) -------------- Backed up on the WD 2T Hard-drive I have
                                  (not connected yet)                                         I                                                          (*connected to timecapsule physically)
                                                                                                        I
                I                                         I                                                I                                                              I                                                I
      Macbook Pro                             iMac                                       HP (PC)                                             OLD Macbook Pro                         iPhone
(used for remote working)       (Used for home working)     (used for heavy CAD and rendering)    (not being used for anything at the moment)        (& iPods)
I am looking to have all my files in one place as i am hopelessly disorganised. I know the online clouds are a good solution (used Dropbox at work and uni for 3 years) however i am wanting to create my own 'dropbox/icloud' at home. So whenever i get back home with my laptop, any work i have been working on whilst out that day is updated to the timecapsule, and then ultimately as i turn on the other devices, they update to those newer versions of the files. Please tell me that the 3TB time capsule i have can do this, otherwise it feels rather overpriced as a wireless storage device?
Another note (to those in the know) If i am to be working on large files (REVIT/SOLIDWORKS/KEYSHOT/CREO/AUTOCAD) - is the timecapsule connection good enough to support editing and updating these files?
I know i may be asking a question that many have before, but as a bit of a technical novice I wanted a clear-cut answer to my specific circumstances. Your help is greatly appreciated.
(*can i use this WD hard-drive that is connected to the Time Capsule as a back up? so that the time machine back-ups/any back ups are also backed up onto this one? can the WD be a backup for the TC?)
Kind Regards
Joe

The diagram was supposed to look more like this......
Internet ---------TIME CAPSULE(containing all files) --------WD 2T Harddrive
                                            I
     I                           I                          I                            I                                   I
Macbook Pro         iMac                 HP (PC)            OLD Macbook Pro           iPhone
Sorry!
Regards
Joe

How can I create a document with two columns in which the text in the left hand column flows to the left column on page 2,3 etc, and doesn't interfere with the text I want to place in the right? Pages 5.

I'm using pages 5 and want to comment in a right hand column, on a (latin) text which I wish to place in a left hand column.
Ideally I'd like to be able to copy and paste the latin text and see it flow over into the left hand column on multiple pages.
At the moment it is impossible for me to keep the text only in the left hand column Any help!?
B

Columns do what columns do, flow from the bottom of the left hand column to the top of the right hand next column. So won't do what you want.
Your tag says you are using OS X 10.5.8 but you say you are using Pages 5 so one or the other is not correct.
If you migrated up to Pages 5 what did you do with your previous Pages '08 or '09?
Because Pages 5 is missing over 100 features, one of which is Textbox linking, that would allow to flow down through a series of Textboxes set up like columns.
What you can do is run the Latin text down a narrow document to the left and add individual Textboxes to the right and put your English translations in those. The Latin will flow but the English will not.
Peter

Footer display without space in all page (in footer place)

Hi All
wish you merry cristmas.
in my layout my customer wants all pages contains the record upto last .
if i will dispaly upto last in main window , then where i will make the footer .
when i am making the footer in first page all the pages footer space is comming blank
which my custmer does'n't want.
By....

Hi Sai ,
Thanks , for reply .
sorry , i not using the table
i am selecting the data and displaying on all pages
and use the templage for table .
but what is happening , all the pages displaying data upto footer but last 100 cm comming blank due to footer place.
and the last page comming footer
But my customer doesn't want to blank in place of footer.
by....

New technique to place multiple anchored objects in InDesign story

Hello,
For a while I have been trying to figure out how to insert multiple anchored objects into an Indesign story. As far as I can tell, you cannot copy multiple objects that have already been placed in a document (such as a multi-page pdf) into an InDesign story, but must copy and paste them one-by-one into the story. This is a problem for a project I am working on where I want to have a large number of 340x52 pt pdfs to flow throughout a document in a master text frame interspersed with text.
I have now found a solution for this issue that I thought I would share in case it would be helpful for anyone. It utilizes Automator actions for Mac OS X and Microsoft Word 2011 [2008 may work also, but I don't have a copy of that to test]; I am not good with scripting but perhaps similar solutions could be found for other systems and programs.
1. If you want to place a multipage pdf within a text frame, first it into individual files for each page (with Acrobat Pro or pdftk or something similiar).
2. Create an Automator service or program with the action "Create New Word Document". You can also use another automator action to save the document, or save it manually (to change the filename). In the finder, select the items you want, then run the service or drag them into the Automator program you have created.
3. Place the word document into your InDesign story. Your items will now be anchored objects ordered in your text frame as they were in the finder.
Please let me know if this is helpful or if anyone has suggestions for doing this process is a more efficient way. I am not sure, but it may be the case that this approach would only work on Macs, as I gather from this thread.

I might note that I am using InDesign CS 5, and importing from a document stored in docx format.

PC in place of DTU

Similar Messages

Maybe you are looking for