PC Suit and system hangs (win XP-Professional)

The time i switch on my pc suite it hangs also the entire system. I am not even able to open the task manager. The only solution is the hard boot.
Same is the case when i plug in my E61I phone via usb cable.
Have already installed the latest version couple of times, removed even the registry settings..but the problem remains...
Please help...thanks...
Regards
Arif

I installed latest version, Nokia PC Suite 7.1.18
I have Windows XP, SP3, just installed.
¿ It's needed .NET Framework 2.0 or 3.0 ?
Every time I starts PC Suite, the computer hangs.
Thanks in advance

Similar Messages

  • LR3 crashes on opening and system hangs

    Hi- I just got LR3.
    I kept my Lightroom catalogues on an external drive.
    First time I opened LR3 I linked to catalogue and when it was about 75% through upgrading, system froze, got grey overlay on screen and message to restart computer - but all I could do was to cut the power.
    I reapired permissions, moved catalogues to mac in 'pictures' and tried again.
    I managed to open a catalogue, looked at a picture & then it crashed.
    Optimized LR2 catalogues etc
    reinstalled etc.
    Now all I get is the LR3 logo and system crashes immediately.
    Help - rather annoyed that I've just spent £78 for this.
    The LR2 upgrade when I had it worked flawlessly.
    Others seem to be having the crash further on - I can't even look at catalogues now.
    Update: just repaired permissions and am getting:
    ACL: found but not expected for many strings - dont know hat t means

    I have also had this thread on Canon Forum and Lightroom Forum where I followed the path you suggested.
    After various solutions including setting up a clean user account, it was suggested (on Lighroom forum) that I try and open LR3 in 32 bit - which I did and it worked.
    I then looked at LR2 which had been working as I noticed a comment that it too was 64 bit - but I had been running it in 32 bit.
    I changed LR2 to 64 bit and it also crashed in exactly the same way - so It appears that for LR2 , on installing, the default was 32 bit and for LR3 the default was 64 bit.
    Looking on the system requirements for LR3 it says that I ned at least 1G ram - but I have 3G! However, other comments are that LR3 needs 4G to work properly.
    Many thanks for all your help - and I hope this thread helps others.
    The error message below was what I kept getting every time I tried to load LR3 - the screen froze and I could do nothing but cut the power.

  • Nvidia Driver and system "hang" issue

    Hi all,
    This is my first post on these forums but im not new to Mac or windows. Here's my issue. I just installed a copy of Windows 7 Ultimate RTM on my Macbook. Its the first unibody Macbook 2.4ghz w/ 4gigs of ram. Nvidia 9400M graphics.
    2 Things happen,one is that a few times a day ill get a "Nvidia Windows Kernel mode driver, version 186.81 failed" error. The symtoms of which are a black screen for a few seconds and then the driver restarts and all is well.
    I know 186.81 is the latest 9400M driver. So im not sure why this happens but maybe it relates to my other issue.
    My second issue is that the system will, as best as i can describe it, "hang" for a second or two. When i say hang i do not mean freeze to the point of needing to restart, its more that the "hang" happens and a few seconds later its as if nothing happened (this issue is very fequent).
    Anyone else ever see or hear anything like this? Please let me know if there is a better place to post this question as well.
    Thanks!
    P.S. Posted this somewhere else and got 1 reply so far, pasted below:
    Okay, how about uninstall or roll back the driver?
    use Driver Sweeper 2
    just let Windows 7 install its own driver
    more like the hang is hard drive has spun down
    I would recommend creating your own thread and question instead.
    by "the hatter"

    Hello guys and thanks for your answers.
    I thought that my problem was linked to UEFI, so I reinstalled the os with BIOS and MBR. Unfortunately I had the same problem, with one difference: the auto/default resolution of GRUB and FrameBuffer was 800x600 instead of 1920x1080 for UEFI.
    About the nouveau driver, I need 3D acceleration to play games so I need the proprietary driver.
    So I decided to test the X server to see if something got wrong.
    I uninstalled the nvidia driver and reboot to have my framebuffer back.
    Then I edit the ~/.xinitrc file :
        xterm & sleep 10
    I reinstalled the nvidia driver and reboot : GRUB, then framebuffer for 1 second, then a black screen.
    I tried to log in: login + [Enter] + password + [Enter]
    I waited 2s then I entered the "startx" command.
    And the xterm window appeared. And the best is after the 10s the X server shuts down and the framebuffer was back !!! Unbelievable !!!
    So I continued the installation : Gnome + Gdm.
    After the reboot : Grub, then framebuffer for 1 second, then a black screen, then Gdm login screen !!!
    So it seems to be a problem with nvidia driver and the framebuffer.
    After the Gnome + Gdm installation I managed to display the framebuffer in tty2. But I don't know if tty2 was working before (when tty1 only display black screen).
    My conclusion and installation tip is to not reboot after the nvidia driver installation and to install a desktop environment + a display manager and to pray to not have problem.

  • Re: Satellite R630-13U and support for Win 7 Professional 32bit

    Hi Guys,
    I just bought a Satellite R630-13U pre-loaded with OEM Windows 7 Home 64bit, but I was having problem running our database application cause it only supports 32bit Operating System. So, I was planning to change the OS to Windows 7 Professional 32bit. However i was really doubtful if this laptop supports 32 bit OS.
    So, does this model compatible for 32 bit OS? and also, if I do changed and format the pre-loaded OS does it voids the warranty?
    Your guidance before i changed anything is much appreciated.
    Thank You.
    Satellite R630-13U
    Part No. PT31LE-00V012AR

    At first I must say that you can install whatever you want on your notebook. It has nothing to do with warranty. Before you install any other OS create recovery DVD using preinstalled Toshiba recovery disc creator. One day when you want to use original OS again you can use this disc for Win7 64bit OS installation.
    You can install 32bit OS without ay problem but fact is that Toshiba doesnt offer drivers for Win7 32 bit but I think it is possible to find most of drivers.
    Create recovery DVD and install 32bit version. Let Win7 search for all important drivers. If some of them are missing please let us know. We can try to help you find most important drivers.

  • Possible HDD problem - clicking sound and system hangs on Qosmio G30-116

    Hi,
    I just got my G30-116 back from service (screen replacement) and after 2 days another problem. It just keeps hanging out.
    I did not change a thing since I got it and now it just stops working on occasional things like browsing the internet. It has not happened before. And my biggest worry is the clicking sound that my hard drive makes.
    What can be wrong? It did not crush before I have sent it to service, not I think my hard drive is faulty... Thanks

    What to say? If you can not find out why freezing problem occurs try to preinstall OS with delivered recovery DVD.
    Anyway according to your description I am afraid there is some serious problem with HDD and it can be just worse then now. Please be sure your data are backed up.
    Please contact service again and explain them the situation. If the HDD is defective you will get new one and if they have the HDD on stock it can be replaced very fast. G30 is very nice unit and I hope you will be satisfied. Few days ago my friend has visited me and we have tested his G30 with HD-DVD drive on my LCD TV. I just can tell you one thing: I am really impressed about HD picture quality.
    Good luck!

  • CAS Latency reading incorrect and system hanging

    well i searched (maybe not enough) and tried a few things, but i'm stuck. 
    at BIOS post screen shows memory CL3, regardless that i have set CL to 2 and ddr voltage to 2.6
    memory:
    Kingston Hyper X
    KHX3200A/1G CL2
    2-3-2-6-1
    2.6V
    2x1GB Stick of PC3200 DDR400
    MoBo:
    k8t neo-fis2r (6702)
    hdd:
    200GB Maxtor SATA (on the VIA slot)
    OS:
    windows xp pro sp2
    also this issue which may or may not be related... after my windows login screen my desktop background comes up but nothing else, and hangs like that for a few minutes, then all of a sudden the rest loads up.  maybe 1 out of every 30 bootups the computer boots right through without hangs.

    Ahh I think I have the answer. A64's can handle up to 4 banks of RAM at the rated specs without dropping back to a slower speed. In Kingstons own specs they show each of these DIMMS at 4 banks each so by using two you have 8 banks of RAM. So your forcing the CPU's memory controller to drop back to get the rated timings. I would get better RAM if it was me. Most 1GB sticks are 2 Banks each so you would stay at the rated speed easy with 2GB of RAM. I know the RAM I have works on that board at the rated speed even though it requires a tad more voltage. I have tested them and had no issues.
    http://www.valueram.com/datasheets/KHX3200A_1g.pdf
    Keep in mind as well that the memory controller is not on the MB but rather in the CPU with any A64 CPU. The only thing the MB does is to keep Bios settings about the RAM which it sends to the Memory Controller at startup. However if the specs are wrong the controller will either balk and not post or it will force the RAM to drop back in speed to work.
    I know this also may help. As you have an A64 stay away from any type of Value RAM as it always seems to hold unpleasant suprises. Stay with a good quality RAM as there is very little difference in prices but can have many issues if you try to save a buck or two.

  • Solve Drive self-ejects and System Hangs when using MULTIPLE external drives!

    I've discovered what I think is the underlying reason for many folks reporting similar problems.  I bet that I can predict the GUIDs of the drives/docks/cases you're having trouble with!  I bet that if you look in Disk Utility, if you click on the drives, you'll find "Connection ID 13757101839304263"! 
    Oh and if you look in System Profiler and click on 'FireWire' or 'USB' you'll find the GUID 0x30E002E0454647 ! 
    What are the odds?  I shouldn't be able to predict them; theyr'e supposed to be unique, after all, but google that number and you'll see that a great many devices all use that GUID.   (13757101839304263 in decimal is the same thing as 30E002E0454647 in hex.)
    Mac OS seems to rely on them to be unique, and has fits when they aren't.  I haven't found a total solution yet, but in the meantime, running this in Terminal can help:
    sudo kextload /System/Library/Extensions/IOFireWireFamily.kext/Contents/PlugIns/AppleFWOHCI.k ext/
    Sometimes it helps to run this first to unload before loading the kext (kernel extension):
    sudo kextunload /System/Library/Extensions/IOFireWireFamily.kext/Contents/PlugIns/AppleFWOHCI.k ext/
    Enter your password if/when prompted, of course.
    In most cases, if you contact your hard drive manufacturer, they'll provide a utility that will fix the drive so that it actually has a truly unique GUID.
    I'm mad at Cavalry for hiding the problem and refusing to fix it, W.R.T. the two 1TB HDs I bought from them for around $500, when that was the going price.
    I figured it'd be helpful to create a user tip off the discussion in this thread: Disk Drive ejecting itself - https://discussions.apple.com/thread/2151621?start=615&tstart=0     This is my first attempt to create a tip.  I'm not sure I'm doing it right, but here goes.

    Sorry but this is just a really bad idea.
    1. The airport is ancient.. your speed will be terrible.
    2. Hubs filled with USB drives are never reliable.. disks refuse to spin up.. become unavailable.
    No.. don't do it.
    Plug USB3 hub into the mini and use multiple decent hard drives .. that is fine.. use thunderbolt hub.. use thunderbolt drives if you can afford it.. but never use USB drives on the network.
    3. Time Machine is not reliable to external drive on Airport Extreme.. Apple do not support it in any Extreme except the latest one.
    If you want the material available to the network buy a NAS. You can buy a cheap NAS of 8TB or so and another 8TB of USB drives which you plug into the NAS for backup.. however.. iphoto is not supposed to ever be put on network drives..
    Apple explicitly states you will corrupt it.
    http://support.apple.com/kb/TS5168 Although mostly about FAT32           it adds network drives.
    http://support.apple.com/kb/HT1198
    And I quote
    It's recommended that you store your iPhoto library on a locally mounted hard drive. Storing your iPhoto library on a network share can lead to poor performance, data corruption, or data loss. If you use both iPhoto and Aperture with the same library, using a Mac OS X Extended formatted volume is recommended. For more information, see Aperture: Use locally mounted Mac OS X Extended volumes for your Aperture library.
    For backup of the drives.. use Carbon Copy Cloner.. it is much better than TM as you can setup different job.. TM is really a single function.. !!

  • 4 Green LEDs and System Hang!!

    I have the MSI K7t Pro 2-a, 512 of pc133 ram, geforce 2 mx, soundblaster live *which i have taken out* western digital hard drive 7200 rpm
    I just now got this problem and it start when my brother was using it to play americas army.  He was just sitting there waiting and the screen went black but the computer was still on.
    Now when I reboot, i get 4 green leds and the computer will make it to the loading screen for win2k and soon as it gets to bout loading windows the screen hits black and the computer light is green and the work light, the little orange one is constant, it doesnt flash.
    Whats the deal!
    my sound card dont like this motherboard, ive had ram in this thing that it didnt like now this!!  IS this MOBO  PIECE OR WHAT!>
    Thanks,

    You are probably loading something the videocard doesn't like.  Try to load windows in safemode.  Keep hitting F8 during start up and you'll get a menu which has "start up in safemode" option.  If you can get windows to start, everything looks terrible (256 colors, 480x640 etc).  Reinstall the video drivers.
    Is your board a 6330 or 6380?

  • Are FF4.0.12 and Adobe win,2,159,1 compatable? Since I updated both 5 days ago, I cannot use Facebook or play games. Adobe says it is a FF4 problem so I downloaded 3.6.17 but no help. System hangs.

    XP, 128 bit,ff3.6.17 now but no help.
    Since I updated both, in Facebook my system hangs repeatedly
    Only hard reboot and open new session will let me back on. I have been talking to Adobe support for 3 days and got the advice to put FF3.6.17 back on. It is worse when trying to scroll or trying to play a game. Cursor freezes and system hangs. I need some help pls. Which plugin is best when trying to use facebook and games on FF4.12? DOESN'T ANYONE KNOW OF ANY HELP? Just give me the name of a plugin that FF likes and a Web address. I need to be able to use my browser and would like to play some of my games. PLEASE!!!

    Hey, I really need some help. Doesn't anyone know?
    Just tell me a plugin that will work and not hang FF and give me a website. PLEASE.

  • Win 7 professional 64 bit version. Help me as installation of iTunes is unsuccessful.

    The following error messages appeared:
    1. Error R6034
    2 Apple Mobile Device has not started,
    3. Error 7
    Finally, the softwere required to start again the iTunes 64 installation.
    By doing that there were no success, The operating system is Win 7 Professional, It is new on my PC as I upgraded from Vin Vista Business recently.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I have a pc with windows 7 professional.  I use adobe cs6 production suite and all of a sudden premiere pro stopped working.  I had installed a program recently and created a system restore point prior to it's installation.  I installed Zaxwerks proanimat

    I have a pc with windows 7 professional.  I use adobe cs6 production suite and all of a sudden premiere pro stopped working.  I had installed a program recently and created a system restore point prior to it's installation.  I installed Zaxwerks proanimator 5.1.  Restored computer back and I now get an error when trying to run any cs6 program it is a configuration error and it says to uninstall and reinstall.Won't uninstall says I have an error 1.  What should I do?

    clean and then reinstall, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Hallo, - I have a PC running Win 7 Professional. After running Kaspersky Internet Security 2015 the  Creative Cloud isn't working any more. I tryed to delete the cloud and reinstall (system error 1) it but no change. I also can't download Flash - even not

    Hallo, - I have a PC running Win 7 Professional. After running Kaspersky Internet Security 2015 the  Creative Cloud isn't working any more.
    I tryed to delete the cloud and reinstall (system error 1) it but no change. I also can't download Flash - even not shutting down Kaspersky. Help Please!!

    Hallo, - I have a PC running Win 7 Professional. After running Kaspersky Internet Security 2015 the  Creative Cloud isn't working any more.
    I tryed to delete the cloud and reinstall (system error 1) it but no change. I also can't download Flash - even not shutting down Kaspersky. Help Please!!

  • Hi I've just upgraded from Snow Leopard to Mountain Lion now Quarkxpress 6.5, Adobe creative suite CS2, Adobe Acrobat 7.0 professional and Microsoft Office 2004 will nolonger open. Can anyone please advise me what I can do to get these programs running.

    Hi I've just upgraded my MacBook Pro from Snow Leopard to Mountain Lion. Now my installed programs:- Quarkxpress 6.5 - Adobe creative suite CS2 - Adobe Acrobat 7.0 professional and Microsoft Office 2004 will not open - I get a banner saying not supported by power mac. Can anyone please help me I really need these programs for my work. Thank you!

    hi tuggerose
    i think it is bad new for you. if it's any consilation i went through the same thing when i loaded mountain lion when it first came out. i think the problem is that mountain lion is a pure 64bit operating system and the software you have is 32bit. earlier os's were able to emulate 32bit but the new system does not. the answer is new software. i did it and it cost me a load of money and much angst so your not alone.

  • Norton Security Suite and WIN 10 Compatibility

    Norton Security Suite is compatibile with Win 10 after LiveUpdate upgrades your copy of NSS to version 22.5.2.15.  You can verify the version via Help > About - although you will most likely notice the GUI change to the white/green in lieu of white/yellow Main Page.
    Once your system has been upgraded to version 22.5.2.15, the install of WIN 10 will not remove/disable your NSS as it appears it has been doing for those who went ahead and installed Win 10 prior to the time the announcement was made that NSS was windows compatibile.
    The actual announcement is located on the Norton Forum:
    https://community.norton.com/en/blogs/product-update-announcements/norton-product-update-225215-windows-10-compatibility
    Edited: 29-Jul-2015 | 10:47PM
    [Update on 29 July: Comcast Norton Security Suite 22.5.2.15 released]
    This is just like the past Norton Toolbar add-ons releases, get the upgraded add-ons first via automatic or manual LiveUpdate and then upgrade Firefox to the next version.  So in that respect, this upgrade was not any different in what Norton/Comcast has done in the past.
    Bottom line is new version 22.5.2.15 will be downloaded via LiveUpdate, installed, activated and then WIN 10 can be installed without it uninstalling NSS.
    I will make another post trying to assist those users who have already upgraded to WIN 10 prior to obtaining the version upgrade and receiving the official notification on NSS being Win 10 compatible.

    Hi jimensci,
    True - Edge does not support extensions - the following is what Norton says about it:
    https://support.norton.com/sp/en/us/home/current/solutions/v113038371_EndUserProfile_en_us?inid=hho_ivr_supp_w10_remediation&src=w10

  • I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

    I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

    Hi,
    I could resolve the issue since there were lot of issues after system copy.
    1. During distribued to Cenrtal system - system copy.
    You need to combine both DB and CI export copies in one folder during which one thing can happen.
    SOURCE.PROPERTIES - this file will be there in DB export JAVA folder and also CI export JAVA folder where
    DB SOURCE.PROPERTIES file doesn't have an entry of "src.ci.host". This will stop the SAPINST with error and after modifying the file "SOURCE.PROPERTIES" Traget System Copy finishes without any issue.
    Then after this stage I encountered an issue with bind hosts entry in config tool which was due to virtual host name usage in my HACMP setup due to whcih JAVA gives a startup problem.
    I eliminated this issue also.
    After JAVA started I faced an issue with XI related navigations.
    ecchangeProfile url still had an entry of Production System. This may be a bug.
    After changing that entry, exchangeProfile was downloaded but it had all the source system host entries which were manually changed.
    Now I can access all the XI related navigations.
    I need to also perfrom SGEN and Profiles import.
    Do I need to change any additional settings after this so that my production and DR can work without any issue?
    Do you have any additional checks which I can perfrom to ensure my DR systems consistency before I start the log shipping from Production?
    Regards,
    Rajkumar

Maybe you are looking for

  • Problem...urgent solution needed

    The problem is... table A and table B are related with B as parent table and A child. The value of id (primary key) of table B needs to be populated with the column Bid when the following where condition satisfies. A.x=B.x and A.y=B.y and A.z=B.z for

  • Problem drag buttons on bottom toolbar in IB

    I add a toolbar in the bottom view by IB. But I can not drag UIBarItem or button on the toolbar. The button bounced back and did not appeared on the toolbar. It also happened for Navigation Bar. Anything wrong?

  • I cannot get my pics on Elements 12 to upload to my revel Revel account.

    Two weeks ago I upgraded from the trial version of Elements to the purchased Elements product and paid for a Revel subscription. Since then my pics stopped uploading to Revel. I have spent hours reading forums, been on two chats with adobe cust. serv

  • Can I change background of program with a desired picture?

    Hi Can I change background of program with a desired picture? how? Solved! Go to Solution.

  • ORA-01000: maximum open cursors exceeded ORA-06512

    Hi, An exception error ccurred as below while trying to map a column. Exception oracle.apps.bne.exception.BneSQLException: SQL Exception in BneFlex.validateSegs: java.sql.SQLException: ORA-01000: maximum open cursors exceeded ORA-06512: at "APPS.FND_