PC Suite backup not working

Hi,
yesterday I performed a backup of everything. Messages, calendar, contacts etc.
Today I succesfully performed a update via Nokia software updater.
Now I am struggeling with putting my backup back on the phone. (Can't remember what it is called) Runníng Danish version. :-D
Everything is back on my phone except the phone settings.
It gets to 8% and then my phone gets disconnected.
Running PC Suite 7.0.8.2 - Windows XP SP3.
My Phone is a Nokia E51

you can try to use Noki to verify that the backed .nbu file is correct.
The backup file is a .nbu file which usually is in folder: C:\document and settings\[user name]\Appliction Data\Nokia\Content Copier\.
'Application Data' folder is hidden by default. You might need to change it visible.
What's the law of the jungle?

Similar Messages

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

All the links to download DREAMWEAVER CS3 Creative Suite are not working. How can I download the file ? I have a serial number of a purchased software.

All the links to download DREAMWEAVER CS3 Creative Suite are not working. How can I download the file ? I have a serial number of a purchased software.

They work just fine. whatever issues you have are specific, but without proper system info, browser info and other details nobody can even begin to guess.
Mylenium

Backup not working for File Server

We have System Center 2012 Sp1 installed with Agent Version : 4.1.3453.0
We are protecting File Server which is member in DFS. We have Volume of More than 2TB and which is spanned accross multiple VHDs.
I am facing problem with Backup not working and DPMRA service is getting stopped unexpectedly. When i try to create recovery point manually i don't get option to syncrhonize the changes. 1st and 3rd option is geryed out.
I am getting Error on DPM as Affected area:   E:\
Description:   The replica of Volume E:\ on<ServerName> is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data
from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
   DPM failed to communicate with the protection agent on <Server> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
   More information
Recommended action:   1) Check recent records from the DPMRA source in the Application Event Log on FUSE.win2k.internal to find out why the agent failed to respond.
2) Make sure that the DPM server is remotely accessible from <Server>
3) If a firewall is enabled on the DPM server, make sure that it is not blocking requests from <Server>
4) Restart the DPM Protection Agent service on <Server>. If the service fails to start, re-install the protection agent.
   Synchronize with consistency check.
   Run a synchronization job with consistency check...
Resolution:   To dismiss the alert, click below
   Inactivate
I have Re-installed Agent but it is not helping.
I have Other Volume labeled as F: and sized at 600 GB. Backup of that Volume is working fine for Same server.
Please Suggest how to troubleshoot.
Thanks in Advance.
Swapnil
Thanks, Swapnil Prajapati

HI Chris,
Sharing files using Bluetooth
To share files using Bluetooth, you first need to make sure Bluetooth is turned on, and then use Bluetooth File Exchange to send a file.
To turn on Bluetooth:
Choose Apple menu > System Preferences and click Bluetooth.
Select the On checkbox. To allow other Bluetooth enabled devices to “discover” your computer and send files, also select the Discoverable checkbox.
Select “Show Bluetooth status in the menu bar” so you can quickly send files and perform other actions using the Bluetooth status menu in the menu bar.
To send files using Bluetooth:
Choose Send File from the Bluetooth status menu in the menu bar.
If the Bluetooth menu isn’t visible, choose Apple menu > System Preferences, click Bluetooth, and select “Show Bluetooth status in the menu bar.”
In the window that appears, select the file you want to send and click Send.
Select the device you want to send the file to and click Send.
If you don’t see the device you want to send the file to, make sure the device has Bluetooth turned on and is discoverable.
You do not need File Sharing turned on for Bluetooth technology.
Another way to share files between two Macs is How to use Firewire Target Disk Mode
Carolyn

I just had a logic board replacement and upgrade to 10.9.2, now adobe master suite will not work

logic board replacement on mac book pro, and upgrade to 10.9.2; and my adobe master's suite will not work;the CS4 remains on my applications of hard drive ;computer tells me to contact Adobe??

These are user forums. You need to contact Adobe support directly, by phone or web chat.

Why does power nap time machine backup not work on my August 2012 macbook pro retina?

Hello. I got a MacBook Pro with retina display in August of this year 2012. I have done the SMC ? firmware update and I have 10.8.2 installed on my machine. Power nap still doesn't seem to work. I have the button in energy saver preferences and I have clicked it so it looks like power nap should work. When I am running Time Machine backup with the time capsule and I close the lid (plugged into power) it appears that no progress is made when I reopen the lid. I have closed the lid with activity monitor running and with network displayed. When I reopen the lid it may take up to one minutes to come out of sleep. When it does come out of sleep I can see that there has been no network traffic. Eventually, time machine backup resumes and I can see several megabytes per second. When I closed the lid overnight, just to make sure backup didn't restart after lid closing, I saw that no progress had been made in backup when I reopened the lid.
What options are left if I already have 10.8.2 and I have done the required firmware? One person has mentioned a clean install but I really don't like to have to reenter all the different passwords and all the different preferences again unless that's absolutely necessary. Are there any other options left to try before a clean install?
One other bit of information. I have filevault turned on; however, it looks like others have a working power nap even with file vault enabled. If this is not an option, the power nap button should be grayed out when the machine is in filevault.
Thank you for any help.

Yeah I still have the same problem BTW; it still does not work.
The second I open the lid and take it out of sleep mode, it starts to backup automagically, but when it's sleeping EVEN when it's connected to AC power, TM backups do NOT work to my OS X Server.
I don't understand what the problem is here.
I didn't before but I do have FileVault turned on now -- should that make a difference?
In either situation it didn't work, but now that I think about it, I could understand why it wouldn't backup while asleep. Apparently the encrypted volume will stay encrypted during sleep and even at the lock screen; it's not until you open the lid and log in from the lock screen that it will unlock the encrypted boot volume.
But even still, I did *not* have FV turned on before, and this still did not work.
Is there some third party solution that can do what I want this to do?
Here's my use case:
1.) I have a mac mini at home that I use when I'm at home; it runs OS X server.app (bought and paid for) and has TM server turned on.
2.) I have a laptop that I mainly use at work and I don't use at all when I come home (ie. when I'm ready to head home for the day I close the lid and don't open it until I'm back at work the next day, but the laptop does come home with me every day).
What I want to have happen is this:
1.) The minute my laptop enters my home wifi lan (even though it's still asleep with lid closed) I want it to automatically backup the boot drive.
I thought that's what Power Nap was supposed to do, but then I found out that in order for this to work, you have to be connected to AC power; so then I tried that -- ie. every day I come home, I put my laptop in a docking station that has AC power, but TM backups while lid closed / sleeping STILL do not occur!
Thanks for your help everyone...Looking forward to a solution that works.
EDIT:
I found this thread:
https://discussions.apple.com/thread/4158709
"It looks like Power Nap doesn't perform Time Capsule backups when the MacBook Air screen is closed."
So apparently that is yet *another* requirement to get powernap working. The lid can not be closed.
What is the difference between sleep with lid open and sleep with lid closed!?

New MacBook (Aluminum), new Time Capsule (Dual-Band), backups not working

My Mom got a new (refurbished) 13.3" MacBook (Aluminum) and new (not refurbished) Time Capsule 500 GB (Dual-Band.) The Time Capsule is working great for wireless internet and we can copy files to and from it, but Time Machine backups are not working. I enabled Time Machine, selected her TC, and then when it tries to backup it sits at the preparing stage for a little while and then gives a very unhelpful "the backup failed" message. Unfortunately I don't have the exact error message, but it never gets out of the preparing phase. It doesn't stay in preparing forever, it only stays there for a minute or so before it gives up and reports the backup failed message and stops. It's unclear to me, searching these forums, if this problem is the same as others are reporting.
I've tried turning off Time Machine and back on, removing and reselecting the Time Capsule, etc. Nothing makes a difference. There are no backup files on the TC - it's brand new.
This happened out of the box, but I also tried installing the latest Time Capsule firmware. It didn't help.

Apple needs to create a configuration tool that configures all the Apple devices one owns by creating a network diagram using drag and drop symbols...
Sounds like a cool suggestion. If you want Apple to hear it, go to www.apple.com/feedback/timecapsule.html

Time Machine backups not working with Yosemite upgrade?

Time Machine backups "Waiting" with no data after Yosemite install?

But still not working.....Im getting some error message/info come up though that i never had come up before when running mavericks....I can't even insert a 2.9MB pic/image of pic i took of screen error msg...says 3.0MB Max??
Saying something about the disc couldn't be found.....but i have highlighted/encrypted back up disc selected...not "available discs".....back up disc is the one I've always backed up to....can anyone on here just help me with this please!!??
Thank you.

Monthly and Yearly backups not working for Protection Group?

Hi
We have a Protection Group with 160 members currently attached to it. The group has the following customized Recovery Points:-
- 1 recovery point every 1 day for the last 2 weeks, 1 recovery point every 1 month for the last 60 months and 1 recovery point every year for the last 5 years.
The schedule is as follows:-
- Every Day at 01:00, Every Month on First Day at 01:00 and Every 12 Months on 01 January at 01:00.
The daily tape backups are working fine without issue but neither the Monthly or Yearly backups are being attempted. We have checked the monthly backups for this issue for the last few months and are unable to see any evidence of the Monthly schedule even
running? This means that we are having to manually label the Daily tapes once a month as Monthly tapes but they will then stay on the Reports for the next 5 years as DPM will constantly request these tapes back.
Are you able to help with this matter?
Not that we really want to do this but if we removed the group completely and re-create it would this cause problems with our restore points?

Hi,
This is a known issue that can occur in all current versions of
DPM including DPM 2012, to correct the condition, you simply need to perform this step. Any time before the next scheduled (monthly or longer) backup, manually update
the long term backup schedule by hitting the MODIFY button. The code that runs when modifying the backup schedule redoes the bacup schedules and it fixes the scheduling issue.
Below is a DPM Power-shell script that will show you the scheduled backups for all recovery goals for all protection groups. You can see the last time each recovery goal ran, and the NEXT run time, so you can monitor
the goals and re-fix them if necessary.
NOTE: It takes about 20-30 minutes before the fixed next run time schedule will be populated after modify the protection group and updating the schedule.
# This script will list all currently scheduled backup to tape jobs #
# It will list scheduled, last run and next run dates #
# Note: The script takes in consideration that the DPM Database was installed locally on its #
# Default instance. If SQL is installed on a different location/instance, edit the line #
# that starts with $instance = '.\msdpm2010 #
# Author : Wilson Souza #
# Date Created : 1/13/2012 #
# Last modified : 1/17/2012 #
# Version : 1.0 #
# This version of the script was only tested on DPM 2010 #
param([string] $verbose)
add-pssnapin sqlservercmdletsnapin100
Add-PSSnapin -Name Microsoft.DataProtectionManager.PowerShell
$ConfirmPreference = 'None'
cls
$instance = '.\msdpm2010' # <---- If DPM Database is on a different location, edit this line accordinly
$query = "use DPMDB
go
CREATE FUNCTION label (@GUID varchar(36), @kindred varchar(4), @vault varchar(8))
returns varchar (1024)
as
Begin
declare @result varchar (1024)
select @result = vaUltlabel from tbl_mm_vaultlabel where mediapoolid = @GUID and generation =
case @kindred
when 'Fath' Then '2'
when 'Gran' then '1'
when 'grea' Then '0'
end and
vault =
case @vault
when 'Offsite1' then '3'
when 'Offsite2' then '4'
when 'Offsite3' then '5'
when 'Offsite4' then '6'
when 'Offsite5' then '7'
when 'Offsite6' then '8'
when 'Offsite7' then '9'
else
'1'
end
RETURN @result
END
go
use DPMDB
select ScheduleId as name
,def.JobDefinitionId as JD
,FriendlyName as PG
,SUBSTRING (CONVERT(VARCHAR(10),active_start_date),5,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),active_start_date),7,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),active_start_date),1,4) as SD
,jobs.date_created as SCD
,SUBSTRING (CONVERT(VARCHAR(10),last_run_date),5,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),last_run_date),7,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),last_run_date),1,4) + ' ' +
SUBSTRING (CONVERT(VARCHAR(6),last_run_time),1,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),last_run_time),3,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),last_run_time),5,2) as LRD
,SUBSTRING (CONVERT(VARCHAR(10),next_run_date),5,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),next_run_date),7,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),next_run_date),1,4) + ' ' +
SUBSTRING (CONVERT(VARCHAR(6),next_run_time),1,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),next_run_time),3,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),next_run_time),5,2) as NRD
,dbo.label ((substring(xml,(patindex('%MediaPoolId%',Xml))+13,36)), (substring(xml,(patindex('%generation%',Xml))+12,4)), (substring(xml,(patindex('%vault%',Xml))+7,8))) as TL
,case
when substring(xml,(patindex('%vault%',Xml))+7,3) = 'off' then 'Long-Term'
else 'Short-term'
end as STLT
,case
when substring(xml,(patindex('%generation%',Xml))+12,4) = 'Fath' then 'Recovery Goal 1'
when substring(xml,(patindex('%generation%',Xml))+12,4) = 'Gran' then 'Recovery Goal 2'
when substring(xml,(patindex('%generation%',Xml))+12,4) = 'Grea' then 'Recovery Goal 3'
end as RG
from tbl_SCH_ScheduleDefinition sch
,msdb.dbo.sysjobs jobs
,tbl_JM_JobDefinition def
,DPMDB.dbo.tbl_IM_ProtectedGroup prot
,msdb.dbo.sysjobschedules jobsch
,msdb.dbo.sysjobsteps jobsteps
,msdb.dbo.sysschedules syssch
where CAST(sch.ScheduleId as NCHAR (128)) = jobs.name
and def.JobDefinitionId = sch.JobDefinitionId
and def.ProtectedGroupId = prot.ProtectedGroupId
and jobs.job_id = jobsch.job_id
and jobs.job_id = jobsteps.job_id
and jobsch.schedule_id = syssch.schedule_id
and (def.Type = '913afd2d-ed74-47bd-b7ea-d42055e5c2f1' or def.Type = 'B5A3D25C-8EB2-4032-9428-C852DA5CE2C5')
and sch.IsDeleted = '0' and def.ProtectedGroupId is not null
order by FriendlyName, next_run_date, next_run_time
go
drop function label
go"
$result = Invoke-Sqlcmd -ServerInstance $instance -Query $query
$count = 1
write-host " The list below shows all scheduled backup to tape jobs (short term and long term)" -f green
write-host
if ($verbose.ToLower() -eq '')
write-host " For optimun output, set PoweShell Width for screen buffer size to at least 200" -f yellow; write-host
write-host
write-host " Protection Group name Creation Date [Schedule Creation Date] [Last Run Date / time] [Next Sched Run Date/time] Goal type Recovery Goal # Custom Tape Label"
write-host " ------------------------------ ------------- ------------------------ ---------------------- -------------------------- ---------- --------------- -----------------"
foreach ($result1 in $result)
if ($color -eq 'white') {$color = 'cyan'} else {$color = 'white'}
write-host ("{0,2}"-f $count) -foreground green -nonewline
write-host ( " - {0,-30} {1,-13} {2,-24} {3,-24} {4,-27} {5,-10} {6,15} " -f $result1.PG, $result1.SD, $result1.SCD, $result1.LRD, $result1.NRD, $result1.STLT, $result1.RG) -nonewline -f $color
write-host $result1.TL -f yellow
$count++
else
write-host " For optimun output, set PoweShell Width for screen buffer size to at least 110" -f yellow; write-host
write-host " Protection Group Term Goal Tape Label"
write-host " ------------------------------ ---------- --------------- --------------"
foreach ($result1 in $result)
if ($color -eq 'white') {$color = 'cyan'} else {$color = 'white'}
write-host ("{0,2}"-f $count) -foreground green -nonewline
write-host ( " - {0,-30} {1,-10} {2,15} " -f $result1.PG, $result1.STLT, $result1.RG) -nonewline -f $color
write-host $result1.TL -f yellow
$count++
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
I cant seem to get this script to run.. can someone point out what might be missing..
I've tried creating a shortcut like the following as well:
Target: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit -File "C:\Program Files\Microsoft
DPM\DPM\bin\dpmcliinitscript.ps1" "C:\Data\scripts\scheduledjobs.ps1"
Start in: "C:\Program Files\Microsoft DPM\DPM\bin\"
If i run as admin in just takes you to a command line prompt in PS..
Any thoughts on what is missing here.. i've modified the ps1 to reflect 2012 in my case.. 2012 R2
DPM
Tech, the Universe, Everything: http://tech-stew.com
Ok, the 1.6 script works.. but only if i run it from the ps1 script file.. by right clicking it and doing the Run with Powershell option (non admin).. my shortcut doesnt work.. same issue.. it just goes to a power shell prompt. The right click and
run is non admin mode as well.
When I run it with the right click it shows no jobs scheduled.. If i look in dpm 2012 r2 i see a yearly tape backup scheduled for today.. the script doesnt show me a way to also get the monthly to appear (i've set the monthly for a day later but it doesnt
appear in the scheduled tasks for next 7 days).. i was under the impression this script would help force the monthly to appear/run.. but even the yearly that does show in DPM scheduled tasks isnt showing up with the script (maybe admin issue?)
Tech, the Universe, Everything: http://tech-stew.com

Adobe Suite will not work, Im stuck.

Im going to make this simple and short.
windows vista 64 bit
Installed cs5 master suite.
Everything worked except for photoshop!
Tried in un-install cs5 master suite.
Would not let me.
Like a ******* I un-installed my cs3 suite thinking it was causing problems for cs5.
cs5 still wouldnt uninstall nor could I get photoshop to install. (i think it had something to do that my machine is 64 bit)
tried just installing photoshop only...would not work.
SO I got the bright idea to delete all instances of Adobe off my machine.
I un-installed all adobe products, except cs5 master suite becuase it just would not un-install.
I manually went into the program folders and deleted all cs5 master suite files I could find.
Downloaded the trial design premium suite from adobe.
Would not install. Exit code 7
Tried to reinstall my cs5master suite. Will not install.
NOW I have no adobe products, I.E. photoshop, dreamweaver, Flash, etc. and Im forced to work from my laptop.
I have tried reading the exit code 7 log, and now Im stuck.
Dont know what to do or where to turn? I have been on with support..they referered me back to the exit code 7 help files!!?? wtf.
I know I messed up by un-installing cs3,
ANY HELP would be apprectiated.
IM WILLING TO PAY SOMEONE TO GET MY ADOBE PRODUCTS WORKING, I CAN INSTALL PC ANYWHERE AND LET YOU HAVE AT IT.
I have been at this for over a week, my only other thing I can think of is reinstall windows, or buy a new machine.
[email protected]

See the "Using" articles about the CS3 and CS5 clean script on Adobe Support:
http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=cs3%20clean%20script&cat=supp ort
http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=cs5%20clean%20script&cat=supp ort
Latest Windows Installer:
http://www.microsoft.com/downloads/details.aspx?FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f 9f4&displaylang=en
Microsoft Windows Installer Cleanup Utility:
http://support.microsoft.com/kb/290301

Itunes 11 backup - not working

Hi everybody
Before updating an ipad app I'm trying to backup data to my macbook using itunes. (this is what the app developer recommends for this particular update)
But the backup is not working and I don't what is happening.
I am running Mountain Lion 10.8.2 and itunes 11 on my macbook.
According to Apple support, I should be able to do this in iTunes 11:
Transfer files from your iPod touch, iPhone, or iPad to your computer
                           Connect your iPod touch, iPhone, or iPad to your computer and select your device.
                           Click Apps.
                           Below File Sharing, from the list on the left, select the app on your device that you want to transfer a file from.
                           From the list on the right, select the file you want to transfer, and click “Save to.”
                           In the window that appears, select the destination where you want to save the file, and click Open.
The file is saved to the selected destination on your computer.
I have followed all these steps, however nothing seems to happen when i click Open.
If I browse to the folder/destination that I had selected when I clicked Open, it is completely empty.
In this case I had created a folder on my desktop to save the backup to.
Can anyone offer me any suggestions?
FWIW I am trying to save .fdb files - which I am unfamiliar with.
Thanks.

Hey guys, I had the same problem. I checked all three options:
1/ Crossfade kept it at 10 as 12 wouldnt work)
2/ Sound enhancer
3/ Sound check
Then I relaunched itunes and it now works. Hopefully it keeps working, and haopefully this helps you guys out also !

Deleting expired backup not working.

Hi,
I am cleaning up the backup by deleting all the expired backups. My OS is RHEL 4 and DB is 10.2.0.3 and the backup is Veritas Netbackup using RMAN
Recovery Manager: Release 10.2.0.3.0 - Production on Mon Mar 28 12:51:16 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: WHSEPROD (DBID=2974933951)
connected to recovery catalog database
RMAN> delete expired backup;
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: sid=136 devtype=SBT_TAPE
channel ORA_SBT_TAPE_1: Veritas NetBackup for Oracle - Release 6.5 (2007072400)
allocated channel: ORA_SBT_TAPE_2
channel ORA_SBT_TAPE_2: sid=145 devtype=SBT_TAPE
channel ORA_SBT_TAPE_2: Veritas NetBackup for Oracle - Release 6.5 (2007072400)
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=181 devtype=DISK
List of Backup Pieces
BP Key BS Key Pc# Cp# Status      Device Type Piece Name
255513 255464 1   1   EXPIRED     SBT_TAPE    arch-s254-p1-t662126514
484866 484825 1   1   EXPIRED     SBT_TAPE    arch-s5711-p1-t680801187
1256712 1256637 1   1   EXPIRED     SBT_TAPE    arch-s257-p1-t724703694
1433633 1433540 1   1   EXPIRED     SBT_TAPE    arch-s5681-p1-t733340847
Do you really want to delete the above objects (enter YES or NO)? yes
deleted backup piece
backup piece handle=arch-s254-p1-t662126514 recid=254 stamp=662126515
deleted backup piece
backup piece handle=arch-s5711-p1-t680801187 recid=5674 stamp=680801188
deleted backup piece
backup piece handle=arch-s257-p1-t724703694 recid=254 stamp=724703695
deleted backup piece
backup piece handle=arch-s5681-p1-t733340847 recid=5674 stamp=733340848
Deleted 4 EXPIRED objects
RMAN> delete expired backup;
using channel ORA_SBT_TAPE_1
using channel ORA_SBT_TAPE_2
using channel ORA_DISK_1
List of Backup Pieces
BP Key BS Key Pc# Cp# Status      Device Type Piece Name
255513 255464 1   1   EXPIRED     SBT_TAPE    arch-s254-p1-t662126514
484866 484825 1   1   EXPIRED     SBT_TAPE    arch-s5711-p1-t680801187
1256712 1256637 1   1   EXPIRED     SBT_TAPE    arch-s257-p1-t724703694
1433633 1433540 1   1   EXPIRED     SBT_TAPE    arch-s5681-p1-t733340847
Do you really want to delete the above objects (enter YES or NO)?Even after it says it deleted 4 EXPIRED objects, why does it show those same four pieces? How can I get rid of it? Obviously, it is EXPIRED, so I don't need it. I ran crosscheck command too. That didn't worked. I ran the delete with force and obsolete options too. They also did not worked. Please help. What am I missing?

I tried that change command. But I am getting
RMAN> change backupset completed before '01-Jan-2011' uncatalog;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of uncatalog command at 04/06/2011 12:55:34
RMAN-06122: CHANGE .. UNCATALOG not supported for BACKUPSET
The action change suggested was to use
RMAN> change backupset .... delete;
This says deleted. But again when I list backup this shows.

ICloud backup not working

I ran the backup last night...it still shows that the latest backup was in December 2012. I have enough storage left. Any ideas?

If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.

Nokia PC Suite does not work on Satellite A100-234

I have installed Nokia PC Suite in my notebook (Satellite A100-234) unfortunatelly its not working. The same cable and Mobile is getting connected with other PCs.
Kindly send your valuable suggestions.

Hi
Could you please be more specifically???
Did you get any error messages or something else???
Maybe something goes wrong during the installation procedure
Therefore I would recommend removing this Nokia program and try to install it again.
Additionally I would recommend checking the PC Suite FAQ on the website

Change computer : Adobe suite is not working so well anymore

Hi, I've just changed my professionnal computer & re-installed Adobe creative Suite standard CS but it isn't working well anymore
Illustrator doesn't open all the file it should
Indesign is so slow I can't work and shut when it's too busy
Is there something I've forgot to install on the new computer?
And I want to upgrade for CS4, will it be a problem since Creative suite isn't working so well anymore?
Thanks for helping

By chance it is still a Windows XP!
The settings of the printer are the same that they were with the old computer!
Illustrator : for exemple it doesn't open a file that I've used before, which is a .ai file! Why this file, I don't know! and my collegue can open it.
Computer technicians here don't know anything about Creative suite, and Adobe won't help me because my version is too old (although I'd like to upgrade to CS4). It's crazy because I won't upgrade until the problem is not fixed!

PC Suite backup not working

Similar Messages

Maybe you are looking for